Hello
I have a Siemens SX66 with the much talked about Bluetooth issues I'm trying to resolve:
1. BT Activesync connection cuts out when uploading/downloading
2. BT connection cuts out when connected to my HF820 BT Moto Speakerphone
I'm attributing this to problem of the PDA going into "sleep" mode. I heard clubimate.com has the BT patches but I cannot register on the website because I have a Siemens and not an I-Mate PDA. Please, if you can provide a link to the patches (all other links I've found on this site or web have been dead) or if you could email me the .cab file. I would really appreciate it - [email protected]
Unless of course you think it may be another problem.
I am most appreciative.
Nick
Clubimate published "PDA2k UniDirectional Patch.sa.cab", it is for 1.40 ROM or older. This is for resolving problem with no sound when someone calls/you calls someone disappeared. I've never heard abut BT updates from Clubimate.
I have a BroadcomCorp_BT1.0.0.3900.cab and can send it to you. What is your version of BT?
Yes. Supposedly this Clubimate produced patch solves a lot of BT issues. Please, see the following links:
http://forum.xda-developers.com/viewtopic.php?t=14277
http://forum.xda-developers.com/viewtopic.php?p=73927
But like I said all the links are dead and I can't get an account on clubimate.
BT Build 3900 would be great! [email protected]
Rom version: 1.40.00 WWE
Radio version 1.15.00
ExtRom version: 1.40.125 WWE
Related
Hi all,
I'm new on this forum and hope to get some help from all the gurus around, please.
I have a PDA2k with the following config:
ROM: 1.22.00 WWE
EXT ROM: 1.22.162 WWE
RADIO: 1.06.00
BT Stack: 3500
Now everything works perfectly on this phone except the bluetooth. I have read different solutions, but dont know which to try out. Club Imate are yet to release a solution to this. Can someone pls advise what is the best solution to have the BT work fine with a headset, ie resume from sleep mode and better synchronizing.
Thanks in advance
Medube
Think you need to read wiki,
Best solution with BT seems to be High radio and High BT Patch, still with that you won't be happy. (smile)
Link in my signature
Is it possible to upgrade the BT ver? SX66 has 1.0 and just isn't worth using. :roll:
Siemens website
chammj,
Have you tried the Siemens website? It has a ROM update (1.33.11) for the SX66, which according to them it fixes some issues with BT. I do not use any BT device, so I do not know how good/bad it is. If you want to, give it a shot. I thought I might drop a line and try to help out a little.
Good luck and let me know how it turns out :wink:
http://communications.siemens.com/c...ype%3Adownloads_imagePos%3A0,00.html#Firmware
If you want to keep yor SX66 up-to-date the best way is to visit the SX66 (Blue Angel) Standardization Project page - http://sx66-blueangel.home.comcast.net/
Thanks
I have the latest ver update from Siemens
ROM update (1.33.11) Fixed Bluetooth Problem?
Hi chammj, did you install it?
I'd install the Standardization Project from http://sx66-blueangel.home.comcast.net/ but it doesn't make any diferese on the bluetooth. But I like it.
I just read of a Simens ROM update (1.33.11) for the SX66 but I don't know if I should change the update.
There is some one who had try the 2 of them?
Re: ROM update (1.33.11) Fixed Bluetooth Problem?
PRTEQ said:
Hi chammj, did you install it?
I'd install the Standardization Project from http://sx66-blueangel.home.comcast.net/ but it doesn't make any diferese on the bluetooth. But I like it.
I just read of a Simens ROM update (1.33.11) for the SX66 but I don't know if I should change the update.
There is some one who had try the 2 of them?
Click to expand...
Click to collapse
The Simens' "Official" ROM 1.33.11 is not worth it. You won't see any improvement in the BT neither. I'd say stick with the latest updates from http://sx66-blueangel.home.comcast.net/.
I personally have on my SX66 now:
ROM version 1.40.00 WWE
ROM date 03/10/05
Radio version 1.13.00
Protocol version 1337.42
ExtROM version 1.40.125 WWE
And besides... I don't think Simens plans to do any updates any time soon. So SX66 Standardization Project is the way to go.
hello..
i am still suffering from the unidirectional sound problem i.e. sometimes someone calls me, they can hear me but i cant hear them. I prevoiusly had Radio 1.13 with BT 3900 and 1.31 ROM on my spv m2000. I applied the patch:
(ftp://xdaupload:[email protected]/Blueangel/PDA2k_UniDirectional_Patch.sa.cab)
but the problem did not go away....i then reverted back to default config (Hard reset my phone - see below for my config). I applied the patch again but the problem still hasnt gone away! darn!!
can someone help?!
Thx
Kadabra
Tip:
While you're on call with someone and you don't hear him/her just "Turn ON > OFF the Bluetooth"
thnx.....now thats gonna be a mission....bring out the stylus, switch BT on/off....sheeeesh
so its clearly bt PROB...HMM
what if i remove BT lnk from startup?
kadabra
kadabra said:
thnx.....now thats gonna be a mission....bring out the stylus, switch BT on/off....sheeeesh
so its clearly bt PROB...HMM
what if i remove BT lnk from startup?
kadabra
Click to expand...
Click to collapse
This should solve to..
I too am having this problem, I have the SPV M2000 - nothing has been upgraded or changed. I need it for my work, and this bug is driving me crazy. People phone me and I can't hear them, I have applied the patch with no success at all. I don't want to delete the bluetooth startup file, as I also use it in the car. Can anyone shed any further light on this. There must be a solution out there.
Appreciate all help
Cheers
Barney
SPV M2000
Operator Version: 5.31.1.124
ROM Version: 1.31.00 WWE
ROM Date: 12/13/04
Radio Version: 1.06.02
Protocol Version: 1337.38
ExtROM Version: 1.31.124 WWE
Barneyabz...
i now leave BT permanently on and i never have this problem
this is the only known and tested solution so far...forget the patch. the geek who wrote it was prob half asleep.
Kadabra
My friend bought Bluetooth headphone for his mobile phone and I just tried to pair with my IIs, and it doesn't.
And then, I found "Widcom 1.5.0.2000" in here.
I am trying to install the stack but I don't know the exact way to do it.
Can anyone show me the exact way to install the stack!!!
----------
O2 XDA IIs
ROM: 1.40.00 WWE
Radio: 1.12.00
ExtROM: 1.40.923 WWE
rudolf88 said:
My friend bought Bluetooth headphone for his mobile phone and I just tried to pair with my IIs, and it doesn't.
And then, I found "Widcom 1.5.0.2000" in here.
I am trying to install the stack but I don't know the exact way to do it.
Can anyone show me the exact way to install the stack!!!
----------
O2 XDA IIs
ROM: 1.40.00 WWE
Radio: 1.12.00
ExtROM: 1.40.923 WWE
Click to expand...
Click to collapse
This should tell you..
http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
hi,
i have followed the instruction to upgrade the bluetooth stack. however the ms stack still there. now i got two bluetooth icons in my connection setting. help me.
thanks
Well, I have found the latest version (I hope) in the XDA-Developer's FTP.
ftp://ftp.xda-developers.com/BlueAngel/CAB_Files/Bluetooth Upgrades/
It's a cab file so the installation was very easy.
MrPhilly, thanks for the help.
Anyway, is there anyway to check this version (1.6.0.600) including A2DP or not?
And are there any BT headset can do both:
1. listen to musics
2. talk on the phone
the brain said:
hi,
i have followed the instruction to upgrade the bluetooth stack. however the ms stack still there. now i got two bluetooth icons in my connection setting. help me.
thanks
Click to expand...
Click to collapse
I am experiencing the same problem. The upgrade is performed succesfully but the two icons are there.
Hi Guys,
Hope someone can help me with this one (apologies if I'll use incorrect terms, but I'm a newbie).
I have a Qtek 9090 with WM2003SE installed (ROM 1.40.04 and Radio 1.12.0) with Bluetooth Broadcom 1.0.0 build 3900.
I'm trying to use a Metasystem Metablue BT car kit, but after succesful pairing Qtek9090 cannot find any available service.
Dangaard is telling me that the problem is with the fact that both handsfree and headset profiles are needed and this is not supported in WM2003SE; only in WM5...
I'm basically stuck, as I do not know 1) if WM5 can be installed on my Qtek9090 (and if so, how?); 2) if the problem would then be fixed; 3) if there is any quicker solution to the problem.
Would appreciate any suggestion you guys might have on the matter!!!
Many many thanks!
Regards
Dude, read the wiki.
It explains how to prepare your PDA to use WM5, and how to load it.
Thanks SandStorm,
I did forget to mention I had a look at the wiki, but it is still unclear to me if WM5 will solve my problem with the bluetooth profiles and will therefore worth the risk of messing up with rom files.
I do have also questions on the WM5 upgrade procedure, but will post them in the appropriate thread.
Many thanks
Cheers!
Problem solved upgrading to WM5.
Thanks
Regards