Develop Bugs

Bluetooth Upgrade for Siemens SX66 ???

Is it possible to upgrade the BT ver? SX66 has 1.0 and just isn't worth using. :roll:

Siemens website
chammj,
Have you tried the Siemens website? It has a ROM update (1.33.11) for the SX66, which according to them it fixes some issues with BT. I do not use any BT device, so I do not know how good/bad it is. If you want to, give it a shot. I thought I might drop a line and try to help out a little.
Good luck and let me know how it turns out :wink:
http://communications.siemens.com/c...ype%3Adownloads_imagePos%3A0,00.html#Firmware

If you want to keep yor SX66 up-to-date the best way is to visit the SX66 (Blue Angel) Standardization Project page - http://sx66-blueangel.home.comcast.net/

Thanks
I have the latest ver update from Siemens

ROM update (1.33.11) Fixed Bluetooth Problem?
Hi chammj, did you install it?
I'd install the Standardization Project from http://sx66-blueangel.home.comcast.net/ but it doesn't make any diferese on the bluetooth. But I like it.
I just read of a Simens ROM update (1.33.11) for the SX66 but I don't know if I should change the update.
There is some one who had try the 2 of them?

Re: ROM update (1.33.11) Fixed Bluetooth Problem?
PRTEQ said:
Hi chammj, did you install it?
I'd install the Standardization Project from http://sx66-blueangel.home.comcast.net/ but it doesn't make any diferese on the bluetooth. But I like it.
I just read of a Simens ROM update (1.33.11) for the SX66 but I don't know if I should change the update.
There is some one who had try the 2 of them?
Click to expand...
Click to collapse
The Simens' "Official" ROM 1.33.11 is not worth it. You won't see any improvement in the BT neither. I'd say stick with the latest updates from http://sx66-blueangel.home.comcast.net/.
I personally have on my SX66 now:
ROM version 1.40.00 WWE
ROM date 03/10/05
Radio version 1.13.00
Protocol version 1337.42
ExtROM version 1.40.125 WWE
And besides... I don't think Simens plans to do any updates any time soon. So SX66 Standardization Project is the way to go.

unidirectional sound problem in BA

hello..
i am still suffering from the unidirectional sound problem i.e. sometimes someone calls me, they can hear me but i cant hear them. I prevoiusly had Radio 1.13 with BT 3900 and 1.31 ROM on my spv m2000. I applied the patch:
(ftp://xdaupload:[email protected]/Blueangel/PDA2k_UniDirectional_Patch.sa.cab)
but the problem did not go away....i then reverted back to default config (Hard reset my phone - see below for my config). I applied the patch again but the problem still hasnt gone away! darn!!
can someone help?!
Thx
Kadabra

Tip:
While you're on call with someone and you don't hear him/her just "Turn ON > OFF the Bluetooth"

thnx.....now thats gonna be a mission....bring out the stylus, switch BT on/off....sheeeesh
so its clearly bt PROB...HMM
what if i remove BT lnk from startup?
kadabra

kadabra said:
thnx.....now thats gonna be a mission....bring out the stylus, switch BT on/off....sheeeesh
so its clearly bt PROB...HMM
what if i remove BT lnk from startup?
kadabra
Click to expand...
Click to collapse
This should solve to..

I too am having this problem, I have the SPV M2000 - nothing has been upgraded or changed. I need it for my work, and this bug is driving me crazy. People phone me and I can't hear them, I have applied the patch with no success at all. I don't want to delete the bluetooth startup file, as I also use it in the car. Can anyone shed any further light on this. There must be a solution out there.
Appreciate all help
Cheers
Barney
SPV M2000
Operator Version: 5.31.1.124
ROM Version: 1.31.00 WWE
ROM Date: 12/13/04
Radio Version: 1.06.02
Protocol Version: 1337.38
ExtROM Version: 1.31.124 WWE

Barneyabz...
i now leave BT permanently on and i never have this problem
this is the only known and tested solution so far...forget the patch. the geek who wrote it was prob half asleep.
Kadabra

radio update!?

i have jasjar
rom 1.13.53 WWE
radio 1.03.01
protocol 42.36.P8
extRom 1.13.137
thats the newest rom, isnt it!?
as i can see, lots of people talk about radio update 1.04.02 but i cant find it!? I tried at forum links (ftp, universal folder) but there is no anything about radio!!!??
btw what about improvement, 1.03 vs 1.04 ?
regards

There you go
http://www.megaupload.com/?d=7YF2JH2A :lol: :lol:

Flashing Radio will loose settings in standard Rom ?
Hello,
Will Flashing ONLY the Radio Rom mean, that all settings will be saved, or will the device be Hard-reset ?
Kind regareds,

Re: There you go
taiseer999 said:
http://www.megaupload.com/?d=7YF2JH2A :lol: :lol:
Click to expand...
Click to collapse
TNX!

Re: Flashing Radio will loose settings in standard Rom ?
Scotty said:
Hello,
Will Flashing ONLY the Radio Rom mean, that all settings will be saved, or will the device be Hard-reset ?
Kind regareds,
Click to expand...
Click to collapse
hmmm, im not sure, cant remember but i think that settings will be saved!

I have a Jasjar, which was running:
ROM version 1.13.53 WWE
Radio version 1.03.01
ExtROM version 1.13.137 WWE
I ran the radio-only upgrade, which errored the first time but ran without problem the second time. After a soft reset, I now have:
ROM version 1.13.53 WWE
Radio version 1.04.02
ExtROM version 1.13.137 WWE
All my settings/hacks were retained and no information was lost. The radio appears to be stable.

Hi, Sorry... im posting a newbie question... please ignore if "beneath" you...
Im confused on the "radio" upgrade thing. I mean, is this really the radio that we know of (FM/AM)? Why the need for upgrade? How do i make the radio work then?
Laugh all you want, read all your posts and i still dont get it.

The "radio" portion of the Jasjar is the phone/gprs componentry. The rest of the Jasjar is the PDA componentry. Because, theoretically at least, WM5 products can be PDA-only and because the radio portion of WM5 products can vary widely (differing standards for various parts of the world), the firmware is released in two parts: the base operating system for the PDA and the radio subsystem addition for the phone/gprs functions. This explanation is somewhat broad, and not 100% accurate, but hopefully provides some clarification.

can i use this to update my orange spv m5000? or is there another version for it..\
cheers

ok i've tried several times now and its not working.....

its not working for my spv m5000 either

ssn04 said:
The "radio" portion of the Jasjar is the phone/gprs componentry. The rest of the Jasjar is the PDA componentry. Because, theoretically at least, WM5 products can be PDA-only and because the radio portion of WM5 products can vary widely (differing standards for various parts of the world), the firmware is released in two parts: the base operating system for the PDA and the radio subsystem addition for the phone/gprs functions. This explanation is somewhat broad, and not 100% accurate, but hopefully provides some clarification.
Click to expand...
Click to collapse
Thanks for the explanation.. that was tech101 for me I get it now.. It's the "phone" part then.. upgrading the radio might have something to do with connecting wifi, bt etc... and i really though i could tune in to my favorite radio station.. haha
Thanks a heap!

Thanks for the explanation.. that was tech101 for me I get it now.. It's the "phone" part then.. upgrading the radio might have something to do with connecting wifi, bt etc... and i really though i could tune in to my favorite radio station.. haha
Thanks a heap!
Click to expand...
Click to collapse
You are welcome. BTW, something like this http://www.dealsonic.com/csdsedifmstr.html would add AM-FM capability to a Jasjar if WM5 drivers are available. Note though that it would seriously truncate battery life.

FYI, the SD-Radio is the older model.
Take a look at the sleeker SD-Radio2...
http://www.c-guys.net/products/sd-radio2.html

Works
Hi,
Tha radio Rom upgrade worked Fine.
No settings have been lost. and I hope some Telphone and bluetooth problems are history now.
Regards,
Bjorn

Benefit of Radio 1.04 over 1.03?
Just got my i-mate jasjar. Wondering about upgrades but it seems to work and if it aint broke, dont fix it!!
For those who have flashed from 1.03 to 1.04, what improvements were there?
Thanx

I just updated my 1.03.00 to 1.04.10 on my Qtek 9000
The biggest improvement is the time from hitting the 'pick-up' button to the connection being established. On the older version, this took about 5-7 seconds.... on new version, this happens instantly.
Maybe it's just me, but i think the sound quality of the phonecall is improved too.

Post deleted as I managed to upgrade the radio stack successfully to 1.04.10
cheers guys

Hello
can some1 please tel me what improvement thet is withn the Radio version 1.04.10.
I've done a rom upgrade on my Xda exec the radio is still 1.04.02.
Is the radio vrsion 1.04.10 compatable with the xda exec.
Please some1 advice.
Thank You
Gigino

i have downloaded: radio_.nbf = radio rom and: MaUpgradeUt_noID.exe
put it in 1 directorie and when i run the exe i get an error can't find ruu.dll
with files do i need to upgrade only the radio and where can i find them, or what am i doing wrong..
i am a newbee
my device is a qtek 9000

Radio 1.06.00 Upgrade

Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...

ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
I understand that you hadn't to hard reset the jasjar after upgrade it with this radio. Please confirm and if is any tricks to apply.
As you can see below, I have radio 1.04.10 installed. Anybody know the differences between these 2 loads?
Thanks in advance (obrigado). BetoX
---------------------------
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.10 (MANUAL UPGRADE)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE

No tricks, no hard reset, just a normal radio upgrade...

Hello
Has anybody tryed this on the Xda Exec?
Regards
Gigino

ncruz said:
No tricks, no hard reset, just a normal radio upgrade...
Click to expand...
Click to collapse
I don't know what pocedure you guys use, because to me happens allways the same... have to hard reset it, upload the original ROM and following it upgrade to the latest radio...
Can somebody explain the complete procedure without having to hard reset it?
Thanks in advance (obrigado). BetoX
---------------------------
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.10 (MANUAL UPGRADE)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE

Where did this version of radio rom come from? Can anybody who has done the upgrade comment on the version? anything better or worse?

gigino said:
...
Has anybody tryed this on the Xda Exec?...
Click to expand...
Click to collapse
I've been using radio: 1.06.00 since Tuesday or Wednesday without problems. Hasn't fixed nor broken anything as far as I can see.
Radio 1.06.00 was issued as part of the recent German MDA update.

[No message]

Yes, ist working, had to do the update several times, like 10x, before it was installed, soft reset ......and.....IT'S ALIVE
thanks

Thanks, ncruz! the radio upgrade on my MDA Pro worked flawlessly on the first attempt. My device information now shows:
ROM version: 1.13.69 WWE
ROM date: 10/12/05
Radio version: 1.06.00
Protocol version: 42.37.P8
ExtROM version: 1.13.162 WWE
I was hoping the radio would solve a couple of issues I've mentioned on this thread:
http://forum.xda-developers.com/viewtopic.php?t=38876
but, unfortunately the wireless manager and bluetooth issues still persist.

Hi,
Removed SD and SIM cards.
However, as with my all Universal previous ROM upgrades (only Radio till now), I got several errors (114; 150;...) till succed. About 15 and long attempts.
Did you experience a similar problem?
Could it be related with device bootloader version (mine is v1.00). Does someone has a newer one?
Between some attempts and errors, I need to 'soft reset' or 'cold boot' in order to get a different error, and finally a succesfull attempt.
I've a Qtek 9000 with a TMN SIM (Portugal) and it works fine after upgrade.
Just in case, I want to give up in future similar operations, does someone knows how to get rid of the bootloader? Does an Hard Reset resolves? Is there any other way?
Error 114: Radio ROM update error
Error 150: ROM upgrade utility error

I "up?"graded to radio 1.06.
I found it in some conditions slower than 1.04.10, and when I use NovosecSmartFilter, it freezes when a call comes althogh it worked with the previous radio ROM.
Just for you to know...

Tuningszocske said:
I "up?"graded to radio 1.06.
I found it in some conditions slower than 1.04.10, and when I use NovosecSmartFilter, it freezes when a call comes althogh it worked with the previous radio ROM.
Just for you to know...
Click to expand...
Click to collapse
I've noticed 2 times now (with hard resets between) that sometimes when I receive a call, my Contacts open and I can't close them. I can click the Start menu and run another app but then Contacts is brought to the front again. After enough clicking to close Contacts, the upper right corner quickly alternates between "OK" and "X" and I end up having to soft reset.
One thing that I did do differently is that I performed a soft reset prior to O2's extRom installation. Are there any 'fixes' in their extRom that I might need to manually install?
I'm thinking about going back down to 1.04.00 as I didn't have this problem prior. But I'd rather not downgrade.

I'm down?grading to 1.04.10 now....

Re: Radio 1.06.00 Upgrade - borged
ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
Hi I did the supid thing of not actually following all the instructions,
I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
I have tried to hard reset and soft reset but the device wont boot
Any ideas?
Eric

Re: Radio 1.06.00 Upgrade - borged
eappel said:
....I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
Eric
Click to expand...
Click to collapse
It's looking for a serial (not available on Universal) or USB connection, so you'll need to connect to "ActiveStink" via USB cable. The "Serial" will normally change to "USB" when you plug USB in.
Unfortunately, I've never tried it with an *un-partnered* device stuck in bootloader mode - hopefully somebody else has.

ncruz said:
Hi,
Just uploaded the radio 1.06.00 only upgrade to the ftp:
ftp://xda:[email protected]/Uploads/Universal/Universal Radio Only Upgrade 1.06.00.rar
It seems that it's faster to ring and to answer...
Click to expand...
Click to collapse
Can u let me know whether i can upgrade on dopod 900 in singapore or this upgrade is restrict to a particular country.
cheers Taurus

can be used for Dopod 900 also...
the radio update is for all models of HTC universals...

Re: Radio 1.06.00 Upgrade - borged
eappel said:
Hi I did the supid thing of not actually following all the instructions,
I just installed update over a bluetooth activesync connection.
It never finished but after a soft reset my device sits with a grey screen
with the words Serial and v0.60 at the bottom.
I have tried to hard reset and soft reset but the device wont boot
Any ideas?
Eric
Click to expand...
Click to collapse
You have to instal complte original ROM, the one that came with the phone,
just conect the phone with usb, start upgrading your phone, and wait for 20 minuts to be done
thats how I manage to fix mine 8)

I Removed the Radio 1.06.00!
I had a lot of problems with Messagin. I losed all my internet account/Configuration, my SMS ....
It was a problem with the Radio 1.06.00"

Need I-Mate Bluetooth Patches for PDA2K

Hello
I have a Siemens SX66 with the much talked about Bluetooth issues I'm trying to resolve:
1. BT Activesync connection cuts out when uploading/downloading
2. BT connection cuts out when connected to my HF820 BT Moto Speakerphone
I'm attributing this to problem of the PDA going into "sleep" mode. I heard clubimate.com has the BT patches but I cannot register on the website because I have a Siemens and not an I-Mate PDA. Please, if you can provide a link to the patches (all other links I've found on this site or web have been dead) or if you could email me the .cab file. I would really appreciate it - [email protected]
Unless of course you think it may be another problem.
I am most appreciative.
Nick

Clubimate published "PDA2k UniDirectional Patch.sa.cab", it is for 1.40 ROM or older. This is for resolving problem with no sound when someone calls/you calls someone disappeared. I've never heard abut BT updates from Clubimate.
I have a BroadcomCorp_BT1.0.0.3900.cab and can send it to you. What is your version of BT?

Yes. Supposedly this Clubimate produced patch solves a lot of BT issues. Please, see the following links:
http://forum.xda-developers.com/viewtopic.php?t=14277
http://forum.xda-developers.com/viewtopic.php?p=73927
But like I said all the links are dead and I can't get an account on clubimate.
BT Build 3900 would be great! [email protected]
Rom version: 1.40.00 WWE
Radio version 1.15.00
ExtRom version: 1.40.125 WWE