hello..
i am still suffering from the unidirectional sound problem i.e. sometimes someone calls me, they can hear me but i cant hear them. I prevoiusly had Radio 1.13 with BT 3900 and 1.31 ROM on my spv m2000. I applied the patch:
(ftp://xdaupload:[email protected]/Blueangel/PDA2k_UniDirectional_Patch.sa.cab)
but the problem did not go away....i then reverted back to default config (Hard reset my phone - see below for my config). I applied the patch again but the problem still hasnt gone away! darn!!
can someone help?!
Thx
Kadabra
Tip:
While you're on call with someone and you don't hear him/her just "Turn ON > OFF the Bluetooth"
thnx.....now thats gonna be a mission....bring out the stylus, switch BT on/off....sheeeesh
so its clearly bt PROB...HMM
what if i remove BT lnk from startup?
kadabra
kadabra said:
thnx.....now thats gonna be a mission....bring out the stylus, switch BT on/off....sheeeesh
so its clearly bt PROB...HMM
what if i remove BT lnk from startup?
kadabra
Click to expand...
Click to collapse
This should solve to..
I too am having this problem, I have the SPV M2000 - nothing has been upgraded or changed. I need it for my work, and this bug is driving me crazy. People phone me and I can't hear them, I have applied the patch with no success at all. I don't want to delete the bluetooth startup file, as I also use it in the car. Can anyone shed any further light on this. There must be a solution out there.
Appreciate all help
Cheers
Barney
SPV M2000
Operator Version: 5.31.1.124
ROM Version: 1.31.00 WWE
ROM Date: 12/13/04
Radio Version: 1.06.02
Protocol Version: 1337.38
ExtROM Version: 1.31.124 WWE
Barneyabz...
i now leave BT permanently on and i never have this problem
this is the only known and tested solution so far...forget the patch. the geek who wrote it was prob half asleep.
Kadabra
i have jasjar
rom 1.13.53 WWE
radio 1.03.01
protocol 42.36.P8
extRom 1.13.137
thats the newest rom, isnt it!?
as i can see, lots of people talk about radio update 1.04.02 but i cant find it!? I tried at forum links (ftp, universal folder) but there is no anything about radio!!!??
btw what about improvement, 1.03 vs 1.04 ?
regards
There you go
http://www.megaupload.com/?d=7YF2JH2A :lol: :lol:
Flashing Radio will loose settings in standard Rom ?
Hello,
Will Flashing ONLY the Radio Rom mean, that all settings will be saved, or will the device be Hard-reset ?
Kind regareds,
Re: There you go
taiseer999 said:
http://www.megaupload.com/?d=7YF2JH2A :lol: :lol:
Click to expand...
Click to collapse
TNX!
Re: Flashing Radio will loose settings in standard Rom ?
Scotty said:
Hello,
Will Flashing ONLY the Radio Rom mean, that all settings will be saved, or will the device be Hard-reset ?
Kind regareds,
Click to expand...
Click to collapse
hmmm, im not sure, cant remember but i think that settings will be saved!
I have a Jasjar, which was running:
ROM version 1.13.53 WWE
Radio version 1.03.01
ExtROM version 1.13.137 WWE
I ran the radio-only upgrade, which errored the first time but ran without problem the second time. After a soft reset, I now have:
ROM version 1.13.53 WWE
Radio version 1.04.02
ExtROM version 1.13.137 WWE
All my settings/hacks were retained and no information was lost. The radio appears to be stable.
Hi, Sorry... im posting a newbie question... please ignore if "beneath" you...
Im confused on the "radio" upgrade thing. I mean, is this really the radio that we know of (FM/AM)? Why the need for upgrade? How do i make the radio work then?
Laugh all you want, read all your posts and i still dont get it.
The "radio" portion of the Jasjar is the phone/gprs componentry. The rest of the Jasjar is the PDA componentry. Because, theoretically at least, WM5 products can be PDA-only and because the radio portion of WM5 products can vary widely (differing standards for various parts of the world), the firmware is released in two parts: the base operating system for the PDA and the radio subsystem addition for the phone/gprs functions. This explanation is somewhat broad, and not 100% accurate, but hopefully provides some clarification.
can i use this to update my orange spv m5000? or is there another version for it..\
cheers
ok i've tried several times now and its not working.....
its not working for my spv m5000 either
ssn04 said:
The "radio" portion of the Jasjar is the phone/gprs componentry. The rest of the Jasjar is the PDA componentry. Because, theoretically at least, WM5 products can be PDA-only and because the radio portion of WM5 products can vary widely (differing standards for various parts of the world), the firmware is released in two parts: the base operating system for the PDA and the radio subsystem addition for the phone/gprs functions. This explanation is somewhat broad, and not 100% accurate, but hopefully provides some clarification.
Click to expand...
Click to collapse
Thanks for the explanation.. that was tech101 for me I get it now.. It's the "phone" part then.. upgrading the radio might have something to do with connecting wifi, bt etc... and i really though i could tune in to my favorite radio station.. haha
Thanks a heap!
Thanks for the explanation.. that was tech101 for me I get it now.. It's the "phone" part then.. upgrading the radio might have something to do with connecting wifi, bt etc... and i really though i could tune in to my favorite radio station.. haha
Thanks a heap!
Click to expand...
Click to collapse
You are welcome. BTW, something like this http://www.dealsonic.com/csdsedifmstr.html would add AM-FM capability to a Jasjar if WM5 drivers are available. Note though that it would seriously truncate battery life.
FYI, the SD-Radio is the older model.
Take a look at the sleeker SD-Radio2...
http://www.c-guys.net/products/sd-radio2.html
Works
Hi,
Tha radio Rom upgrade worked Fine.
No settings have been lost. and I hope some Telphone and bluetooth problems are history now.
Regards,
Bjorn
Benefit of Radio 1.04 over 1.03?
Just got my i-mate jasjar. Wondering about upgrades but it seems to work and if it aint broke, dont fix it!!
For those who have flashed from 1.03 to 1.04, what improvements were there?
Thanx
I just updated my 1.03.00 to 1.04.10 on my Qtek 9000
The biggest improvement is the time from hitting the 'pick-up' button to the connection being established. On the older version, this took about 5-7 seconds.... on new version, this happens instantly.
Maybe it's just me, but i think the sound quality of the phonecall is improved too.
Post deleted as I managed to upgrade the radio stack successfully to 1.04.10
cheers guys
Hello
can some1 please tel me what improvement thet is withn the Radio version 1.04.10.
I've done a rom upgrade on my Xda exec the radio is still 1.04.02.
Is the radio vrsion 1.04.10 compatable with the xda exec.
Please some1 advice.
Thank You
Gigino
i have downloaded: radio_.nbf = radio rom and: MaUpgradeUt_noID.exe
put it in 1 directorie and when i run the exe i get an error can't find ruu.dll
with files do i need to upgrade only the radio and where can i find them, or what am i doing wrong..
i am a newbee
my device is a qtek 9000
My friend bought Bluetooth headphone for his mobile phone and I just tried to pair with my IIs, and it doesn't.
And then, I found "Widcom 1.5.0.2000" in here.
I am trying to install the stack but I don't know the exact way to do it.
Can anyone show me the exact way to install the stack!!!
----------
O2 XDA IIs
ROM: 1.40.00 WWE
Radio: 1.12.00
ExtROM: 1.40.923 WWE
rudolf88 said:
My friend bought Bluetooth headphone for his mobile phone and I just tried to pair with my IIs, and it doesn't.
And then, I found "Widcom 1.5.0.2000" in here.
I am trying to install the stack but I don't know the exact way to do it.
Can anyone show me the exact way to install the stack!!!
----------
O2 XDA IIs
ROM: 1.40.00 WWE
Radio: 1.12.00
ExtROM: 1.40.923 WWE
Click to expand...
Click to collapse
This should tell you..
http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
hi,
i have followed the instruction to upgrade the bluetooth stack. however the ms stack still there. now i got two bluetooth icons in my connection setting. help me.
thanks
Well, I have found the latest version (I hope) in the XDA-Developer's FTP.
ftp://ftp.xda-developers.com/BlueAngel/CAB_Files/Bluetooth Upgrades/
It's a cab file so the installation was very easy.
MrPhilly, thanks for the help.
Anyway, is there anyway to check this version (1.6.0.600) including A2DP or not?
And are there any BT headset can do both:
1. listen to musics
2. talk on the phone
the brain said:
hi,
i have followed the instruction to upgrade the bluetooth stack. however the ms stack still there. now i got two bluetooth icons in my connection setting. help me.
thanks
Click to expand...
Click to collapse
I am experiencing the same problem. The upgrade is performed succesfully but the two icons are there.
Hello
I have a Siemens SX66 with the much talked about Bluetooth issues I'm trying to resolve:
1. BT Activesync connection cuts out when uploading/downloading
2. BT connection cuts out when connected to my HF820 BT Moto Speakerphone
I'm attributing this to problem of the PDA going into "sleep" mode. I heard clubimate.com has the BT patches but I cannot register on the website because I have a Siemens and not an I-Mate PDA. Please, if you can provide a link to the patches (all other links I've found on this site or web have been dead) or if you could email me the .cab file. I would really appreciate it - [email protected]
Unless of course you think it may be another problem.
I am most appreciative.
Nick
Clubimate published "PDA2k UniDirectional Patch.sa.cab", it is for 1.40 ROM or older. This is for resolving problem with no sound when someone calls/you calls someone disappeared. I've never heard abut BT updates from Clubimate.
I have a BroadcomCorp_BT1.0.0.3900.cab and can send it to you. What is your version of BT?
Yes. Supposedly this Clubimate produced patch solves a lot of BT issues. Please, see the following links:
http://forum.xda-developers.com/viewtopic.php?t=14277
http://forum.xda-developers.com/viewtopic.php?p=73927
But like I said all the links are dead and I can't get an account on clubimate.
BT Build 3900 would be great! [email protected]
Rom version: 1.40.00 WWE
Radio version 1.15.00
ExtRom version: 1.40.125 WWE
Hi Guys,
Hope someone can help me with this one (apologies if I'll use incorrect terms, but I'm a newbie).
I have a Qtek 9090 with WM2003SE installed (ROM 1.40.04 and Radio 1.12.0) with Bluetooth Broadcom 1.0.0 build 3900.
I'm trying to use a Metasystem Metablue BT car kit, but after succesful pairing Qtek9090 cannot find any available service.
Dangaard is telling me that the problem is with the fact that both handsfree and headset profiles are needed and this is not supported in WM2003SE; only in WM5...
I'm basically stuck, as I do not know 1) if WM5 can be installed on my Qtek9090 (and if so, how?); 2) if the problem would then be fixed; 3) if there is any quicker solution to the problem.
Would appreciate any suggestion you guys might have on the matter!!!
Many many thanks!
Regards
Dude, read the wiki.
It explains how to prepare your PDA to use WM5, and how to load it.
Thanks SandStorm,
I did forget to mention I had a look at the wiki, but it is still unclear to me if WM5 will solve my problem with the bluetooth profiles and will therefore worth the risk of messing up with rom files.
I do have also questions on the WM5 upgrade procedure, but will post them in the appropriate thread.
Many thanks
Cheers!
Problem solved upgrading to WM5.
Thanks
Regards