Develop Bugs

M$ official AKU 3.3 here

Many users have asked for the WM5 AKU 3.3 source of my custom ROM for the MiTAC Scoter (AKA MioA701, Mio A700, MEdion MDSP1000, etc...) R020.65a.66.3.3 (AKU 3.3). I actually got the official release of AKU3.3 from the ROM release for the UBiQUiO 501, version 3.00.00. I just used the Mamaich's imgfs_tools and voila! I got a dump folder. Then I applied Bepe's DSMtool and it creates the SYS folder with all the OS packages for WWE. After that it is easy to get the packages into the kitchen.
Enjoy the M$ official AKU 3.3
Regards,
Oki

Cool... thanks man

thanks already ported it for blueangel, i am just flashing it
the another rom that need atention is Herald 1.8 rom
And it works, now it needs a little polishing and wil be perfect
I was unable to port the core but except that everything works just fine
Update: the rom is faster than 3.2, but (there is always but) the phone part of WM does not work, the leds are blinking as normal, show that it has full range, but you can not make a call , and if you open phone related thing the device crashes... but beside this AKU 3.3 is more fast and secure i guess

Noticed more mobile sites are talking about this AKU3.3.
Changes (according to Modaco):
- WPA2 support for WiFi
- improved application for using the device as a modem
- Radio frequency has been fine tuned, should take shorter time to catch radio signal and the roaming problem should be solved
- Protection on the gsm parameter file, will not be corrupted by 3rd party software
- “●” displayed as “123” & “abc”
- Wi-Fi has been fine tuned, please note that IEEE 802.11 b/g means it works with 11g protocol but in the speed of 11b (11Mbp)
- Bluetooth & A2DP has also been fine tuned and fits most of the headset
- Stability been improved
Waiting for some genius to make it compatible with the HTC Wizard/Prophet

mccune said:
Noticed more mobile sites are talking about this AKU3.3.
Changes (according to Modaco):
- WPA2 support for WiFi
- improved application for using the device as a modem
- Radio frequency has been fine tuned, should take shorter time to catch radio signal and the roaming problem should be solved
- Protection on the gsm parameter file, will not be corrupted by 3rd party software
- “●” displayed as “123” & “abc”
- Wi-Fi has been fine tuned, please note that IEEE 802.11 b/g means it works with 11g protocol but in the speed of 11b (11Mbp)
- Bluetooth & A2DP has also been fine tuned and fits most of the headset
- Stability been improved
Waiting for some genius to make it compatible with the HTC Wizard/Prophet
Click to expand...
Click to collapse
Hacking away for the Prophet as we speak

Jesterz said:
Hacking away for the Prophet as we speak
Click to expand...
Click to collapse
Does this mean we gonna skip the AKU3.2 from Faria? And have our own little jewel?

mccune said:
Does this mean we gonna skip the AKU3.2 from Faria? And have our own little jewel?
Click to expand...
Click to collapse
No, I will have my hands on both, but I didn't get an email back from faria about where to download his latest ROM
I think he is very busy at the moment

Jesterz said:
No, I will have my hands on both, but I didn't get an email back from faria about where to download his latest ROM
I think he is very busy at the moment
Click to expand...
Click to collapse
due to some dk i had to take the rom offline .i will let you know were to get it.

faria said:
due to some dk i had to take the rom offline .i will let you know were to get it.
Click to expand...
Click to collapse
There are always idiots
Thanks

If/when there's a 'clean' ROM for G3 then do let is know!

so how did you use imgfs_tools to extract? the ROM is a .DIP and no matter how I try I cant seem to extract anything using imgfs_tools. Thanks for any help.
~mike

first prepare_imgfs WMUPDAT.DIP -nosplit
or you can rename it to nk.nba and do it like usual but with nosplit option, or it will give an error for viewimgfs

xplode said:
first prepare_imgfs WMUPDAT.DIP -nosplit
or you can rename it to nk.nba and do it like usual but with nosplit option, or it will give an error for viewimgfs
Click to expand...
Click to collapse
Thx xplode! I really appreciate it.
~Mike

Quick question for you ROM gurus... the files extracted with viewimgfs, can a file be copied directly to the PPC to use?
Is it missing header info, signature, etc. that would prevent it from working?

joe_dude said:
Quick question for you ROM gurus... the files extracted with viewimgfs, can a file be copied directly to the PPC to use?
Is it missing header info, signature, etc. that would prevent it from working?
Click to expand...
Click to collapse
It depends on the file that you want to get from this ROM. most of them are signed or they are not files but modules, this makes it even harder to export. anyway you can always reconstruct it using itsme's tools or mamaich's tools and that's all. All the data files are not signed and you can use them with no problem... but, do not mix databases from different AKU, they can be different.
Regards
Oki

AKU3.3
Check this out
http://forum.xda-developers.com/showthread.php?t=284887

Wm6 Usb/bluetooth Modem. Help!!!!!

Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated

leoni1980 said:
Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated
Click to expand...
Click to collapse
This has to do with the fact that ics doesn't work with the toshiba bluetooth stack.... If you change to the microsoft stack on yout XP laptop you will be able to use ICS.
Cheers,
HJ

only problem is, that not all PC bluetooth device have this choice, I mean change stack to microsoft.... before you buy any BT stick, look at manufarcuter web, if it is possible to use MS stack. I dont want to make propaganda for MSI products, but there is few BT, which have this choice. actually I using THIS one, and here is possible to install MS stack. here is manual, how to install this device with MS BT stack.
PS: this question has been answered XXX times, so try to search before ask

my bluetooth is integrated into my laptop, hence the convenience. why have microsoft taken a seemingly downward step in windows mobile 6 and made it even LESS compatible than before?!? seems a bit stupid to me.
Also this doesn't answer the question of why I am unable to connect my device via USB. I need this function for work. is there any way of installing the old wireless modem app as a simple solution?
thanks everyone for your help so far

i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX

vdavide said:
i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX
Click to expand...
Click to collapse
Care to tell us what laptop are you using and what bluetooth stack involved because some hardware could be forced to be supported by the MS driver.

sorted
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.

---deleted---

leoni1980 said:
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.
Click to expand...
Click to collapse
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again

vdavide said:
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again
Click to expand...
Click to collapse
Connection through USB supposed to be ok, hmm... but you can try to force the bluetooth hardware to be supported by the MS driver. Could you please do this and give me the details.
The step:
1. Start > Control Panel > System > Hardware > Device Manager
2. Find the unknown USB driver ( The one with the ? beside it)and right clicking on it > Properties > Details > Click the dropdown option and select 'Hardware Ids'
3. You will see something like 'USB\Vid_044E&Pid_300c&Rev_1915' and maybe 'USB\Vid_044E&Pid_300c'.
4. Write down the Ids. and post it here.

@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX

vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I hope you've given me the complete Ids.If so then try this one. Backup the original bth.inf inside \windows\inf\ folder and replace with the one from this archive. Now try to install again by pointing to the new bth.inf. But please uninstall any previous installation first. If not success then tell me since I'm trying to use the widcomm stack.

thx CYPHOL , i will try tomorrow
i'm added the original inf file for this device ...

vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I tried the Internet Sharing facility on my XP tower upstairs (which has never had Activsync on it) and it works just the same - no need for drivers - it's as if I'm just plugging an ethernet cable in.
Be interested to know if the same will be true of old laptops with SP1, as is mine at work.

I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?

lanwarrior said:
I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?
Click to expand...
Click to collapse
WM6 is using PANU whereas WM5 is using NAP as to connect through Bluetooth but if you use USB it should connect as is only that you have to switch the bluetooth off before making the connection.
FYI, I'm using Vaio VGN-TX37GP and can connect through both the USB and Bluetooth conns. after modifying the infos on the MS inf driver file.

@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !

vdavide said:
@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !
Click to expand...
Click to collapse
Nice to hear that but sorry for my careless mistakes done in doing the scripting.

I got ths same issue.
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.

briols6 said:
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.
Click to expand...
Click to collapse
Check this post:
http://forum.xda-developers.com/showthread.php?t=298691#10

HTC P3600 Trinity, DUN Profile, WM6?

Can anyone verify if WM6 on the Trinity brings back the Bluetooth DUN profile?
I'm 95% happy with the Dopod WM5 ROM on my P3600, the only thing missing is that I can't get traffic updates to my tomtom 910.

Hi, I am using mun's 2SE rom and I can now get traffic updates on my tomtom 910.
I did not have to do anything special on the SE version, it just worked.
WM5 etc would not see anything other than the BTHF profile.
all workign now
BMF

Very VERY good news, off to go download WM6 now

I just downloaded and installed mun's 2SE (flawless install). Wow is my phone better
Anyway, it does enable TomTom 910's traffic updating. I had to "delete" my phone from the TomTom 910 and then reconnect to it.
Simple.

Is there any possibility this Bluetooth patch can be worked into the WM6 releases for the Hermes??
I have exactly the same problem (no DUN profile), but on the Hermes.

DOH!
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF

badmelonfarmer said:
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF
Click to expand...
Click to collapse
I found solution) here it is http://forum.xda-developers.com/showpost.php?p=1281328&postcount=882

My Tom Tom GO 700 reports this error during the configuration.
"This phone does not report Wireless data connection (DUN) cabalities."
I have loaded mentioned CAB's.(SP1 and BT_DUN) Is ther a hope on getting this going?
thanks Peter

After adding new cabs, delete phone from TomTom, delete TomTom relationship from phone. Resync.

done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.

psimek said:
done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.
Click to expand...
Click to collapse
try to add this reg entries and files... sorry don't have time to make a cab

Thanks MuM,
Phone is recognized, but cannot connect to cingular.
I will try to play with more settings before I go back.
Peter

Where to Install MODEMLINK?
Where should the contents of MODEMLINK be install? Windows dir?
Thanks

mun_rus said:
try to add this reg entries and files... sorry don't have time to make a cab
Click to expand...
Click to collapse
Please kindly advise where I should put those reg entries & files? TKS & RGDS!

dan.gior said:
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Click to expand...
Click to collapse
to connect over usb you need usb rdiver HTC for pc...
here:

to connect over usb you need usb rdiver HTC for pc...
here:

So I'm a bit confused, does that mean we can use a data connection on the Hermes via Bluetooth for the TomTom 910?

I recommend you this thread, that's the way I got tomtom go data connection and plus services working with my wm 6-updated wizard:
http://forum.xda-developers.com/showthread.php?t=314371&page=3#21
dartrax

ervius said:
to connect over usb you need usb rdiver HTC for pc...
here:
Click to expand...
Click to collapse
Thanks worked painlessly on my O2 Orbit (Artemis/3300).
What a great site - I've learnt loads already and lookforward to overclocking next!
Neil

connected my new smartphone shadows with tom tom go 700
After 5 days of struggle, I finally was able to connect my wireless data (DuN) with my tom tom go 700.
What i did is as follows:
extract the attachment and do the following:
1. Unlocked my phone app for tmobile
2. installed WM6_btdun
soft reset
3. copied all files of SPDUNHACK including registary one to the windows folder(\windows)
4. Installed the installed ATCUI, showed me a serial (COM:1) port
softreset
and connected my tom tom...
But as the experts mentioned earlier, while your tom tom is connected, you are not able to surf the net but able to do all other things. It says voice call active.
Good luck!

I will pay for a WM6 ROM for hx2795 that really works

Hy Guys, I was looking at the thread in the forum, I need a WM6 ENG Rom for IPaq hx2795 that really works. I can pay by PayPal, let me know who has it or can generate it. I am really tired of WM5, it is very slow and freezes all time. Tks.

Maybe to give a try to kozhura's AKU3_52_hx2000 (WM 5.0 English) for IPAQ hx2000 series. I tried it to my hx2490b and is faster than the original. Look at this thread:
http://forum.xda-developers.com/showthread.php?t=326214&highlight=hx2000
I think works for your device, and someone allready try it.

Russian developers don't sleep....
WM6 for HP iPAQ 2*** series

Very good news!! Thanks a lot

The link to the russian ROM for IPaq hx2*** series does not work... anyone else has any clue where I may find a valid ROM for the hx2795 ? tks.

nunesfl said:
The link to the russian ROM for IPaq hx2*** series does not work... anyone else has any clue where I may find a valid ROM for the hx2795 ? tks.
Click to expand...
Click to collapse
LOL!!!! No comments....

Sorry, it was my conexion here... I am downloading it now and will give it a try. tks.

nunesfl said:
Sorry, it was my conexion here... I am downloading it now and will give it a try. tks.
Click to expand...
Click to collapse
Hi,
How is it going, please let me know once you flashed the ROM,

hi nunesfl,
every thing works fine except A2DP, Did you give a try yet ?

This wm6.0 also has the same BUG of battery drained by automatic active sync running.
ABOUT A2DP:
I think someone here must contact Khozura, he successfully make a2dp worked on hx4700 BT either on WM5.0 & WM6.0 by special patch cab.
Please someone here who knows Khozura ask him to make a patch for hx2000, thus we can enjoy a2dp.
Please..please....
MagLite_RUS said:
Russian developers don't sleep....
WM6 for HP iPAQ 2*** series
Click to expand...
Click to collapse

Another BUG in WM6.0:
When using TCPMP player, you can not hear any audio from wmv video. Strange?? I can play and hear the same video at WM5.0.
abbaml said:
This wm6.0 also has the same BUG of battery drained by automatic active sync running.
ABOUT A2DP:
I think someone here must contact Khozura, he successfully make a2dp worked on hx4700 BT either on WM5.0 & WM6.0 by special patch cab.
Please someone here who knows Khozura ask him to make a patch for hx2000, thus we can enjoy a2dp.
Please..please....
Click to expand...
Click to collapse

I have used this rom on a hx2190, and i have found it impossible to sync my calander, being unable to use any of the windows live programs and there is no remote desktop mobie. Apart from them it seems to work

Hi all, I put it in my hx2795, the A2DP does not work, the fingerprint reader does not work, the TCPMP sometimes work and not with AVI and does not work with WMV.
I can not see the contrast and error reporting tools, I saw a post where the developer said it is a case of editing the registry but does not say where...
The boot at first time did not work I was in panic, after that took out the sd and cf, drained the battery and retried, it booted but I am afraid of rebooting it again...
I did not try Windows Live and sync calendar, hope it works...
I have tried other tools (excel, word) and it worked well.
I am not sure this ROM is stable yet, any sugestions ? should I try reflash it back to WM5 or there is anything I could do to minimize these problems and keep the WM6 ?
Please help.

nunesfl said:
Hi all, I put it in my hx2795, the A2DP does not work, the fingerprint reader does not work, the TCPMP sometimes work and not with AVI and does not work with WMV.
I can not see the contrast and error reporting tools, I saw a post where the developer said it is a case of editing the registry but does not say where...
The boot at first time did not work I was in panic, after that took out the sd and cf, drained the battery and retried, it booted but I am afraid of rebooting it again...
I did not try Windows Live and sync calendar, hope it works...
I have tried other tools (excel, word) and it worked well.
I am not sure this ROM is stable yet, any sugestions ? should I try reflash it back to WM5 or there is anything I could do to minimize these problems and keep the WM6 ?
Please help.
Click to expand...
Click to collapse
OK,
I am having the same hx2795 and I found the following
a) Active Sync is working, When I tried at first time it didn't work. After I did a hard reset then I enabled "Advanced networking" from the "USB" settings menu then it worked
b) Sync over Exchange server working fine
c) WiFi is working, I checked with WEP security
d) Bluetooth is working but A2DP is not working When I tried "High Quality Audio Profile" it says authentication failed, I never see it is asking me for the pass key, so I guess that may be the problem
e) TCPMP works fine for FLASH and AVI movies, WMV does not work because WM6 uses a higher version of codecs, so you have to use WMP or you need to replace the WM5 codecs, search through over the forum you will find a solution
f) Finger print authentication works great.
g) Windows Live and messenger is not working, it says there is no connectivity and I don't know what is the deal. But IM+ is working just fine
h) You can install Finster-WM6_RDP.cab as a Termial Service client, it is very good than the inbuilt RDP client in the original HP ROM and it allows you to connect services that use custom ports
i) ROM seems to be stable and I don't have any problem with other functionalities atleast untill now

HX2790B
hi i have a hx 2790b ipaq and is wondering if there is a WM6 Rom update for it reading this thread it seems there is for the 2000 series, but i cant find the link for wm6 for the 2000 series ipaq's any infomation is appreciated
many thanks
Ben

It works for my hx2490b. The link is here:
rapidshare.com/files/53282580/WM06.rar.html

will this work with transflash / transflash hc cards, and currently my hx2790b will not read a 512 transflash card with sd adaptor, and thats not transflash hc, as i have a 4gb transflash in my N95 and that can read it lol

Dear anavas,
I tried to reboot and reinstall as edcom suggested in another forum. WM6 is working now better and I can reboot.
I could not do 'contrast' and 'error reporting' show, any idea ?

we need some detailed instructions for wm6 on a HX2790b as i have tried all sorts and all i get is incorrect device sku,
please help
am desprate

nunesfl said:
Dear anavas,
I tried to reboot and reinstall as edcom suggested in another forum. WM6 is working now better and I can reboot.
I could not do 'contrast' and 'error reporting' show, any idea ?
Click to expand...
Click to collapse
Hi,
even I don't see the contrast and error reporting menu, so I guess it might be work for some other hx2000 series and not for hx2795, or it may be some registry hack, I don't know

Make Broadcom/Widcomm BT stack work on WM6.5

Does anyone know how to make the Broadcomm/Widcomm bluetooth stack work under WM6.5 (I am getting this under build 23518, and haven't tried any other versions of WM6.5, device is Asus A626 pocket pc)? I keep getting message in both the settings manager and the initial bluetooth manager about a missing component or resource. What component could it be referencing, and how can I fix it?

Steven855 said:
Does anyone know how to make the Broadcomm/Widcomm bluetooth stack work under WM6.5 (I am getting this under build 23518, and haven't tried any other versions of WM6.5, device is Asus A626 pocket pc)? I keep getting message in both the settings manager and the initial bluetooth manager about a missing component or resource. What component could it be referencing, and how can I fix it?
Click to expand...
Click to collapse
Define the ver of your broadcomm. Normally my old stack (original) from wm6.0 works without issues in 6.5 builds. It's 1.7.1.9701 as far as I remember

AndrewSh said:
Define the ver of your broadcomm. Normally my old stack (original) from wm6.0 works without issues in 6.5 builds. It's 1.7.1.9701 as far as I remember
Click to expand...
Click to collapse
Andrey, any ideas to make it universal for devices with msstack?
Getting no sound and no touch after installing.

heineken78 said:
Andrey, any ideas to make it universal for devices with msstack?
Getting no sound and no touch after installing.
Click to expand...
Click to collapse
You mean - to make my stack applicable for BT MS devices? No, that does not work. It's OEM hardware driver.

spasibo

AndrewSh said:
Define the ver of your broadcomm. Normally my old stack (original) from wm6.0 works without issues in 6.5 builds. It's 1.7.1.9701 as far as I remember
Click to expand...
Click to collapse
The version of the Broadcom stack that I have is version 1.8.0 build 4800.

Steven855 said:
The version of the Broadcom stack that I have is version 1.8.0 build 4800.
Click to expand...
Click to collapse
Upload your BT OEM Package - I will have a look. I will run it on my device and try fix if it does not work (hopefully but not for sure )

can any1 make 1 widcomm bt stack for htc touch pro? im using energy rom 6.5.3.
i need it cos the bt headset that i bought(SE mw600) communicate with this bt stack for caller name and song title.
appreciate all help..
Thanx