M$ official AKU 3.3 here - Upgrading, Modifying and Unlocking

Many users have asked for the WM5 AKU 3.3 source of my custom ROM for the MiTAC Scoter (AKA MioA701, Mio A700, MEdion MDSP1000, etc...) R020.65a.66.3.3 (AKU 3.3). I actually got the official release of AKU3.3 from the ROM release for the UBiQUiO 501, version 3.00.00. I just used the Mamaich's imgfs_tools and voila! I got a dump folder. Then I applied Bepe's DSMtool and it creates the SYS folder with all the OS packages for WWE. After that it is easy to get the packages into the kitchen.
Enjoy the M$ official AKU 3.3
Regards,
Oki

Cool... thanks man

thanks already ported it for blueangel, i am just flashing it
the another rom that need atention is Herald 1.8 rom
And it works, now it needs a little polishing and wil be perfect
I was unable to port the core but except that everything works just fine
Update: the rom is faster than 3.2, but (there is always but) the phone part of WM does not work, the leds are blinking as normal, show that it has full range, but you can not make a call , and if you open phone related thing the device crashes... but beside this AKU 3.3 is more fast and secure i guess

Noticed more mobile sites are talking about this AKU3.3.
Changes (according to Modaco):
- WPA2 support for WiFi
- improved application for using the device as a modem
- Radio frequency has been fine tuned, should take shorter time to catch radio signal and the roaming problem should be solved
- Protection on the gsm parameter file, will not be corrupted by 3rd party software
- “●” displayed as “123” & “abc”
- Wi-Fi has been fine tuned, please note that IEEE 802.11 b/g means it works with 11g protocol but in the speed of 11b (11Mbp)
- Bluetooth & A2DP has also been fine tuned and fits most of the headset
- Stability been improved
Waiting for some genius to make it compatible with the HTC Wizard/Prophet

mccune said:
Noticed more mobile sites are talking about this AKU3.3.
Changes (according to Modaco):
- WPA2 support for WiFi
- improved application for using the device as a modem
- Radio frequency has been fine tuned, should take shorter time to catch radio signal and the roaming problem should be solved
- Protection on the gsm parameter file, will not be corrupted by 3rd party software
- “●” displayed as “123” & “abc”
- Wi-Fi has been fine tuned, please note that IEEE 802.11 b/g means it works with 11g protocol but in the speed of 11b (11Mbp)
- Bluetooth & A2DP has also been fine tuned and fits most of the headset
- Stability been improved
Waiting for some genius to make it compatible with the HTC Wizard/Prophet
Click to expand...
Click to collapse
Hacking away for the Prophet as we speak

Jesterz said:
Hacking away for the Prophet as we speak
Click to expand...
Click to collapse
Does this mean we gonna skip the AKU3.2 from Faria? And have our own little jewel?

mccune said:
Does this mean we gonna skip the AKU3.2 from Faria? And have our own little jewel?
Click to expand...
Click to collapse
No, I will have my hands on both, but I didn't get an email back from faria about where to download his latest ROM
I think he is very busy at the moment

Jesterz said:
No, I will have my hands on both, but I didn't get an email back from faria about where to download his latest ROM
I think he is very busy at the moment
Click to expand...
Click to collapse
due to some dk i had to take the rom offline .i will let you know were to get it.

faria said:
due to some dk i had to take the rom offline .i will let you know were to get it.
Click to expand...
Click to collapse
There are always idiots
Thanks

If/when there's a 'clean' ROM for G3 then do let is know!

so how did you use imgfs_tools to extract? the ROM is a .DIP and no matter how I try I cant seem to extract anything using imgfs_tools. Thanks for any help.
~mike

first prepare_imgfs WMUPDAT.DIP -nosplit
or you can rename it to nk.nba and do it like usual but with nosplit option, or it will give an error for viewimgfs

xplode said:
first prepare_imgfs WMUPDAT.DIP -nosplit
or you can rename it to nk.nba and do it like usual but with nosplit option, or it will give an error for viewimgfs
Click to expand...
Click to collapse
Thx xplode! I really appreciate it.
~Mike

Quick question for you ROM gurus... the files extracted with viewimgfs, can a file be copied directly to the PPC to use?
Is it missing header info, signature, etc. that would prevent it from working?

joe_dude said:
Quick question for you ROM gurus... the files extracted with viewimgfs, can a file be copied directly to the PPC to use?
Is it missing header info, signature, etc. that would prevent it from working?
Click to expand...
Click to collapse
It depends on the file that you want to get from this ROM. most of them are signed or they are not files but modules, this makes it even harder to export. anyway you can always reconstruct it using itsme's tools or mamaich's tools and that's all. All the data files are not signed and you can use them with no problem... but, do not mix databases from different AKU, they can be different.
Regards
Oki

AKU3.3
Check this out
http://forum.xda-developers.com/showthread.php?t=284887

Related

New Unversal ROM T-Mobile Germany with AKU2

T-Mobile Germany has released a new ROM (AKU2-Update). I Have Uploaded it to the ftp-Server (Filename: TMOB_DEU_pro_aku2.0_05-2006.zip).
Works fine with my MDA Pro. AKU2 works with Exchange and the speed (I think) its faster.
I have no problems.
ROM Version: 1.30.113 GER
ROM Datum: 04/13/2006
Radio Version: 1.10.03
Protokoll-version: 42.44.P8
ExtRom-version: 1.30.223 GER
The spec's look good,
Do you know if I can have this on my English T-Mobile Pro? Will I be able to set the language to English? Will I still be able to have QWERT*Y*UIP along the top, or is the Y moved?.
Cheers!!
Thank you so much, for this hint. Just downloading it. Do you know if A2DP is included in this Image?
Yes, it supports A2DP .... I have tested it!
BE CAREFUL - NEW BOOTLOADER
If you are waiting for an unlocking solution, DO NOT DO THIS UPGRADE. It contains a new version of the Universal Bootloader, which could make unlocking in the future impossible.
jmdrizen said:
The spec's look good,
Do you know if I can have this on my English T-Mobile Pro? Will I be able to set the language to English? Will I still be able to have QWERT*Y*UIP along the top, or is the Y moved?.
Cheers!!
Click to expand...
Click to collapse
No, the Roms normally only contain one language at a time. Unfortunately you have to wait for the english one to be released. But once the german one is released, all other language versions should come very shortly.
skip bootloader-upgrade
I wonder whether it is possible to skip the bootloader-upgrade (bl.nbf) and just load the OS & EXTROM.
Anyone have an idea if this will harm the operation/stability of the device?
skip bootloader-upgrade
I installed it without upgrading the BL, no Probs!
Start Update without connecting your Device and loook into your Temp Directory, there is a new EXE-File - copy to somewhere, stop the Update and run this new EXE!
The new ROM looks fine but
- how do I get back the Wireless-Tab on Today-Screen
- how do I get back the original (green and blue) DialPad-Skin
- can I reconfigure the T-Mobile Today-PlugIn
Re: skip bootloader-upgrade
Pandur said:
I installed it without upgrading the BL, no Probs!
Start Update without connecting your Device and loook into your Temp Directory, there is a new EXE-File - copy to somewhere, stop the Update and run this new EXE!
The new ROM looks fine but
- how do I get back the Wireless-Tab on Today-Screen
- how do I get back the original (green and blue) DialPad-Skin
- can I reconfigure the T-Mobile Today-PlugIn
Click to expand...
Click to collapse
I can answer the Wireless bit...
Wireless Today item
Add the following keys to the registry (Confirmed to work on AKU2 ROMs)
[HKLM\Software\Microsoft\Today\Items\"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
Regards
Re: skip bootloader-upgrade
Pandur said:
I installed it without upgrading the BL, no Probs!
Start Update without connecting your Device and loook into your Temp Directory, there is a new EXE-File - copy to somewhere, stop the Update and run this new EXE!
Click to expand...
Click to collapse
Sorry for the stupid question, but which temp directory? The hidden one below my user data?
And what's the name of the exe?
RE: skip bootloader-upgrade
With German Windows XP:
c:\dokumente und einstellungen\BENUTZER\lokale einstellungen\temp\pftxx.tmp\UNI_TMDE_130113_130223_11003_GER_Ship.exe
"Benutzer" is the Account you are logged in
pftxx.tmp -> xx is changing everytime you run the update...
Re: RE: skip bootloader-upgrade
...or just extract the .EXE file with Winrar (in fact it's an archive with some program stuffed in front of it).
do you know if the Blackberry connect software works with this rom?
Thanks
cdally said:
do you know if the Blackberry connect software works with this rom?
Thanks
Click to expand...
Click to collapse
Definietely not. T-Mobile says on the download page (in German) that an AKU2 upgrade which is compatible with BB will be out in July.
Sorry & Greetings,
Andreas
Hello there,
installed the update 2 days ago - everything was working fine, surfing around, testing A2DP, WLAN, etc.
...but since yesterday i can not connect to the internet aymore.
It dials in via UMTS/GPRS, connects but nothing more. MyIpConfig.exe says:
Adapter Address: 00:00:00:00:00:00
IP Address: 172.21.30.136
Subnet Mask: 255.255.0.0
Default Gateway: 172.21.30.136 <-?? the device itself is the default gateway??
DNS-Servers: 193.254.160.130
193.254.160.1
...rest is empty
Click to expand...
Click to collapse
Has anyone from germany a clou why/if these settings are incorrect? Anyone else the same problem?
Can someone not using aku2 post his network-settings when dialed in?
I tried reinstalling update and resetting device several times, when updating setup leaves information about currently installed versions of radio, ce and rom empty...is this the usual way?
«edit»
got it now working. The Problem was the germen resellerdebitel, who changed the dns-IP. Very kind of them don't telling anyone about the changes.
I just unlocked my Universal and now I'd like to upgrade my rom to the new T-Mobile rom because mine is from August last year. So my question is: will the phone still be unlocked after the reflash - if not can I reunlock it?
Is there any easy rom extractor available?
Thanks.
stupiddog said:
cdally said:
do you know if the Blackberry connect software works with this rom?
Thanks
Click to expand...
Click to collapse
Definietely not. T-Mobile says on the download page (in German) that an AKU2 upgrade which is compatible with BB will be out in July.
Sorry & Greetings,
Andreas
Click to expand...
Click to collapse
Thanks for the info - please would you be kind enough to post a link once they have upgraded it?
Thank-you!
asbtime said:
I just unlocked my Universal and now I'd like to upgrade my rom to the new T-Mobile rom because mine is from August last year. So my question is: will the phone still be unlocked after the reflash - if not can I reunlock it?
Click to expand...
Click to collapse
I did the upgrade, and my phone stays unlocked. So go on and have fun, the new ROM ist GREAT Added Dopod's Radio 1.11.0, seems to consume less battery now, and now I have UMTS in my living room (which I did not have with Radio 1.6.0)
Is there any easy rom extractor available?Thanks.
Click to expand...
Click to collapse
Not that I know, sorry....
cdally said:
Thanks for the info - please would you be kind enough to post a link once they have upgraded it?
Click to expand...
Click to collapse
Well, you can see for yourself, the website is always the same http://www.t-mobile.de/business/downloads/software/1,9913,14751-_,00.html
whats the difference with the new dutch (in english) rom 1.30.233???
excpet for the language.
@stupiddog: Thanks for the info. I just updated to the new rom and it works really faster now.
Thanks!

AKU3.2 Rom for Universal (before 19_11_06-1805)

If you want Information and support, please go here:
forum.xda-developers.com/showthread.php?t=283594
Look in the first Posting of this thread.
Look in the first post of this thread.
Look forward to seeing the new release, and keen to see if the 'phone' issues some of us are experiencing are fixed / not there.
Thanks Ivan
Re: AKU3.2 Rom for Universal
Lt.Cmdr.Ivan said:
Bugs2 known WIFI)
WIFI error1 (1 user reported it)
Universal goes to standby mode with Wi-Fi turned on, then I switch the device on, and it starts trying to register in Wi-Fi net forever (shows "tower" but without circle and rays)
WIFI error2 (1 user reported it)
Sometimes when I close Comm Manager device draws only upper part of screen and hangs, but if you wait for about half minute, it returns to life
Click to expand...
Click to collapse
I have this errors too...
Can i fix this or wait for next beta?
New Beta 8
Hi Ivan
I see a Beta8 with today's date on it, is that the new ROM????
No its just the beta8 repacked and reuploaded, because the rar on the ftp wasn't accurately packed.
...just to be in the thread.
:wink:
for info:
at the under side of the page is a link, click to warch or stop watching this thread.... :wink:
Save contact to SIM
I'm using rc1.
Contacts/tapping any contact/Menu/Save to SIM. The last item namely "Save to SIM" is not available (grey color, not black). Looks it's necessary to change a value somewhere in registry, but I did not manage to find what and where.
Does some1 face such problem? Or there is a solution the problem? Does this bug exists in beta8?
Thx in advance
[edit]
yes, "Save to SIM" is active and works.
hi Ivan
it will hang up when synchronizing with pc some times,and will show cannot get IP from server.I use beta 8.
We want the new rom! We want the new rom !
geovass said:
We want the new rom! We want the new rom !
Click to expand...
Click to collapse
YES, YES, YES !!
Cheers
hrb
2s to universal
Hi Ivan,
I back with you! Also upgraded from 2s to universal. Will try beta 8 on weekend. Anything to watch out for as I do also use the unit for live work...
Regards,
Simon
Hi! I used the beta 6 with pleasure ;-) But now i switched back to the qtek rom - i need a german ROM. I hope ther will be a german release.
Greetings Flo
did anybody try the *ARM*CAB? (BTP). I've downloaded it, the BT manager has changed but when I search for the Universal's services on my notebook, I get only the same 3 services az before...
I tried to flash de beta8 but i get country ID error 120... i read the readme file and it says:
Q14: I get “error 120: Country id error”, what should I do?
A: It may due to you get the wrong image. Please check your device’s device name and language type and download RUU package from the vender web site again and reset your device and then run RUU again.
Has anybody had this problem..I bought my device as qtek9000 via the official vendor of HTC pda's in Holland... I bought it through my girlfriends telecom company... it comes with WM5.0 UK...
it's not simlocked..of course i just updated the radio rom from 1.9.0 to 1.13 with the tools provided by this forum.
alexei said:
I tried to flash de beta8 but i get country ID error 120... i read the readme file and it says:
Q14: I get “error 120: Country id error”, what should I do?
A: It may due to you get the wrong image. Please check your device’s device name and language type and download RUU package from the vender web site again and reset your device and then run RUU again.
Has anybody had this problem..I bought my device as qtek9000 via the official vendor of HTC pda's in Holland... I bought it through my girlfriends telecom company... it comes with WM5.0 UK...
it's not simlocked..of course i just updated the radio rom from 1.9.0 to 1.13 with the tools provided by this forum.
Click to expand...
Click to collapse
You have to use MupgradeNoid.exe
Lt.Cmdr.Ivan said:
Perfectly functioning VGA Mode (regarding to some users)
http://www.jaml.com/MvRTrueVGA/
If you have this problem:
GPRS is connected but the icon is stuck in a loop showing it trying to connect
go here:
http://forum.xda-developers.com/viewtopic.php?t=34995
************************************************************
************************************************************
Aku3.2 compatibility list:
Working
ClearVue 2.3
GSplayer 2.25
ScummVM 0.8 and 0.9
TomTom 5.21
Not working
Blackberry Connect
Special Thanks to
Mamaich
Thanks to
Bepe and friends for his Rom kitchen (This is definitely perfect)
bbs.pdafans.org (For their Rom)
Xda-developers (Knowledge and tools)
Buzzdev.net (Knowledge and tools)
Tuatara (Special tips and tools)
Sub69 (network settings for aku3.2 beta3 and 4 as testing for pushmail)
baudy2 (for compatability of the BB client)
All People submitting programs to working or non working list.
All the testers out there.
All i forgot
Click to expand...
Click to collapse

AKU3.2 Rom for Universal (until 21.12.06)

New thread
Look here:
http://forum.xda-developers.com/showthread.php?p=1082908
Old versions which are good but not the newest
Look here:
http://forum.xda-developers.com/showthread.php?p=1082908
Look here:
http://forum.xda-developers.com/showthread.php?p=1082908
Ahhh... new ROMs are so exciting! How much free RAM after install?
I do the upgrade it's ok
This is the first time I tried your ROM. So far I have no complaints. Speed is comparable to Indra's Beta 5 without anything installed. Both your ROM (Ivan) and Indra feels a little faster than JWright's 1.90.96. What I like about your ROM is the clean look it has, like an official Microsoft released ROM. Thank you for this ROM.
thank you
my very first upgrade
works perfect
Thanks, I'll try it later this week (currently running your beta14)
One Question: you mention
'No Extended Rom needed anymore'
in your changelog. Does this means I no longer have to unlock the Ext_Rom manually? Is it available for use right after flashing, or am I misunderstanding something here?
thanks, very very good work, but this is a transitory rom... well.. when the great change?
Some screen shots plz
Lt.Cmdr.Ivan said:
This is a AKU3.2 Rom.
If you have questions what AKU is about, read this:
http://www.mobile-review.com/pda/articles/wm-aku-en.shtml
Some features from AKU3 on Modaco:
http://www.modaco.com/index.php?showtopic=246614
OS 5.1.342
Build 15605.3.2.0
SP AKU 3.2
newest Beta 15
Very Special thanks to Mamaich because without him the rom wouldn't be as good as it is.
Thanks to venusforu for the plugin pack the should put the Audio/Video files into a working state again.
Old beta14 for reference testing (Speed stability etc.)
ftp://xda:[email protected]_AKU3_WWE/Ivan/UNI_AKU3_2_WWE_IVAN_beta14.rar
NEW AKU3.2 beta15 is on the FTP:
ftp://xda:[email protected]_AKU3_WWE/Ivan/UNI_AKU3_2_WWE_IVAN_beta15.rar
-------------------
Beta15 changes/additions/features List:
CompactFramework 2.0 SP1
Removed Battery icon on top
Pocket MSN works with "non hotmail"(for example [email protected]) adresses
No Extended Rom needed anymore
New MMS Client 3.5.1.5
IA Zip upgedatet
PagePool increased to 6MB
New Ringtone Plugin
New WlanManager
Pocket MSN works with non hotmail adresses
Phonepad included
Pushmail should work
Vista B1 Theme
Added New Battery Icon at bottom (this time it works)
New Camera 3.00 22864
Video Call Support enabled Options screen available now
Smartdialing with options tab
I forgot to mention
USB_HDD function supported
Credits for this go to Jwrightmcps and his rom where i took it from.
Voice Speed Dial Cab from Conchas included in the rar, so you can choose to use it
Autorun function is mapped to autorun.exe again.
Added Improvements from Jwrightmcps BT Stack stuff
Changed Paging settings for speed
----------------------------------------------------------------------------
Please check and verify the programs which function. Especially tests are welcome in this departments:
BB client functionality status unknown
----------------------------------------------------------------------------
As this rom is work in progress it may contain bugs which were removed previously, but not removed from this version. Please check and report bugs and solutions (if you find them).
Bugs: (1 known)
WIFI error1
Universal goes to standby mode with Wi-Fi turned on, then I switch the
device on, and it starts trying to register in Wi-Fi net forever
(shows "tower" but without circle and rays)
Only syncs if you do it manually
Click to expand...
Click to collapse
HI,
CLD ANYONE attach screenshots plz...Excited to look VISTA theme
Thnks
Still Rom date is 09/20/06 and it appers on the startup screen again.
WLan settings are no more accessible after installing German MUI. (Crash)
But that happened on beta 14, too. Seems to be an MUI issue.
melino said:
WLan settings are no more accessible after installing German MUI. (Crash)
But that happened on beta 14, too. Seems to be an MUI issue.
Click to expand...
Click to collapse
Sorry, what is "German MUI issue"?
Thank you...
I do not have the issue of the disconnecting Wifi (the reported "bug")?. So for me an excellent ROM.
Great job once again!!
When I reset the Qtek 9000 I received the message
" sddaemon.exe not present!! "??
Many Thanks
I have installed this rom, after some hour of use the memory ram comes down under 15 mb and must make a soft reset ,but this is normal? someone of you has tried wisbar?for me qtek9000 it is a fantastic device if I resolve the problem of ram ((
babak said:
I have installed this rom, after some hour of use the memory ram comes down under 15 mb and must make a soft reset ,but this is normal? someone of you has tried wisbar?for me qtek9000 it is a fantastic device if I resolve the problem of ram ((
Click to expand...
Click to collapse
Hehe... Don't sweat it. My RAM virtually never goes higher than 12 MB and I have no problems running any applications at all. Cheers!
Camera
Thanks for the update. I'm just wondering how come "New Camera 3.00 still says 22844 instead of 22864 for beta 15? Please let me know. Thanks!
Report on the new ROM (upgrading from O2 UK 1.30.162 ROM):
Booting seems much faster (after installing several apps and having rebooted it a few times). I guess this is due to RAM disk.
True VGA mode is waaay much better than 1.30.162 ROM - system fonts are properly aligned and the only problem I found so far is battery settings and dial pad (the latter is fixable with vinay's application).
Speed and responsiveness seems to be better than my previous O2 AKU2 ROM.
There are a few problems though:
there are some compatibility problems - like InterKey virtual keyboard causes hangs every now and then and it was working perfectly well with AKU2
Battery life seems to be worse than AKU2 - before I had my device on standby with blootooth enabled for the whole working day (8:00-18:00) with an hour of reading with Haali reader and it was hardly below 80% (75 or around). Now it was down to 70 % in the first few hours. And for the curious - I did checked all the usual stuff (receive all beams - off and so on)
Other than that - great
I have installed this ROM, it seems perfect.

Helmi UNI AKU3.2/AKU3.3 ROM (Updated)

Helmi AKU3.3 ROM for Universal v.1.2
ROM Version 2.50.00 WWE
Big thanks to MAMAICH for the tools, and also Indra9110, Lt.Cmdr Ivan, JWJRIGHT, Vijay, Baniazrek and everyone.
Fix With this release:
- Contacts Softkey at phone Applet Fixed
- Better Phone, Backlight, Power & WLan Manager on QVGA & TRUE VGA
- CrossBow Sound Themes
- StartUp Manager with VJBigPhoneRes Shortcut Fixed
- Better speed
- Add USBSwitch For switch beetween Serial & RNDis if USB_HDD or any app need any port (Serial or RNDIs)
Standard ROM Contains:
- NETCF2
- Macromedia Flash 6
- CrossBow Icons Looks, Plus WMP Skin, Sounds
- SmartDial v2.5
- New STK Version
- MMS v3.5.15
- Camera v.3.0
- StartUp manager by Baniazreck, Task Manager v 2.3.0.1, VJBigPhoneRes by Vijay, USB Switch for switching ActiveSync type, etc.
Know Issues
- 3G connection status shown as G not 3G ,the one on the right, the left is 3G icon, 3G avaibility is correctly shown 3G.
Download:
ftp://xda:[email protected]_AKU3_WWE/helmi_c/Helmi_UNI_AKU3.3_v1.2.rar
Helmi AKU3.2 ROM for Universal v.1.0 -obsolete-
Helmi AKU3.3 ROM for Universal v.1.1 -obsolete-
thanks and i will try
finnaly ... HELMI go to universal ..
WOW finnaly ... HELMI go to universal ..
Thanks for the rom ... brother...
cheers
indra9110
Cool, ill try this one.
ok. a good new rom. I tested and run very fast. Faster any rom of Universal.
Load very fast. about 5s.
Thanks Helmi
---------------------
o2 EXEC
Rom 2.50 WWE
Radio version 1.13.00
iluainu said:
ok. a good new rom. I tested and run very fast. Faster any rom of Universal.
Load very fast. about 5s.
Thanks Helmi
---------------------
o2 EXEC
Rom 2.50 WWE
Radio version 1.13.00
Click to expand...
Click to collapse
Which did you try? The 3.2 version or the 3.3?
What is the difference between the two anyway?
i tested AKU3.3 ROM. Can u test to help me which AKU3.2 ROM?
i don't which difference between the two anyway.
Sorry.
Hi Helmi
Thank you very much for your hard work ,it very nice rom and faster
I try Aku 3.2 also loading very fast
Report spme bug display not correct ( File attach)
..........
o2 EXEC
Rom 2.50 WWE
Radio version 1.13.00
i get an error 102: ce image file checksum error when using the included ROMUpgradeUt.exe. i am going to download again the aku3.3 an try again.
regards
peter
I tried both and none worked
peter_altherr said:
i get an error 102: ce image file checksum error when using the included ROMUpgradeUt.exe. i am going to download again the aku3.3 an try again.
regards
peter
Click to expand...
Click to collapse
I tried both and none of them worked. Something wrong with the ROM image, also tried MaUpgradeUt_noID.exe but it doesn't even display the ROM version to be updated. I think the file is corrupted.
i got aku3.3 update working right now. this is what i have done:
- copy the nk.nbf to an empty directory and copy the following files from another aku3.2 update package (ivans for instance) in the directory where nk.nbf is located:
EnterBL.exe
GetDeviceData.exe
ROMUpgradeUt.exe
RUU.dll
RUU.conf
UI.dll
maybe not all files are required but it was easier for me to copy the whole bunch instead of searching for the real required ones
@helmi: can you please check the integrity of the htc files required for update. something must went wrong while preparing the rar-file.
good success
peter
peter_altherr said:
i got aku3.3 update working right now. this is what i have done:
- copy the nk.nbf to an empty directory and copy the following files from another aku3.2 update package (ivans for instance) in the directory where nk.nbf is located:
EnterBL.exe
GetDeviceData.exe
ROMUpgradeUt.exe
RUU.dll
RUU.conf
UI.dll
maybe not all files are required but it was easier for me to copy the whole bunch instead of searching for the real required ones
@helmi: can you please check the integrity of the htc files required for update. something must went wrong while preparing the rar-file.
good success
peter
Click to expand...
Click to collapse
I've got the same issue; then copied only nk.nbf into my original qtek-upgrade directory, changed header to QTEK_001 and worked.
Good jobs...
xanadu said:
I've got the same issue; then copied only nk.nbf into my original qtek-upgrade directory, changed header to QTEK_001 and worked.
Click to expand...
Click to collapse
hmm... Its seems the romupgrade and its dependency is corrupt for some pc... sorry about that...
dmzalarm said:
I tried both and none of them worked. Something wrong with the ROM image, also tried MaUpgradeUt_noID.exe but it doesn't even display the ROM version to be updated. I think the file is corrupted.
Click to expand...
Click to collapse
thue you must have to download again. Can your Image is error.
good luck.
updated, great job.
helmi_c said:
hmm... Its seems the romupgrade and its dependency is corrupt for some pc... sorry about that...
Click to expand...
Click to collapse
Doesn't matter- Your both rom seems be very good.
Good job
2.50.00 WWE is the newest ROM Version.
What is the OS Version?Still 5.1?
AKU3.2 or AKU3.3?
Hello!
Thank you, Helmi!
I have downloded and installed Helmi UNI AKU3.3 (very fast rom indeed), but my version shows OS 5.1342 (Build 15671.3.2.0), doesn't that mean it is in fact an AKU 3.2???
Anyway it seem to be a very good rom!
gtm55 said:
Hello!
Thank you, Helmi!
I have downloded and installed Helmi UNI AKU3.3 (very fast rom indeed), but my version shows OS 5.1342 (Build 15671.3.2.0), doesn't that mean it is in fact an AKU 3.2???
Anyway it seem to be a very good rom!
Click to expand...
Click to collapse
Build 15671 is AKU3.3, Build 15605 is for AKU.3.2
Its seems I've forgot to mod the
[HKEY_LOCAL_MACHINE\System\Versions]
"Aku"=".3.3.0"
Click to expand...
Click to collapse

Radio rom and Cellcore (Ril.dll)

I saw some interesting threads about radio rom and rilphone. If i understand correctly a lot of problems with radio can be caused by not updating the rilphone.dll
http://forum.xda-developers.com/showthread.php?t=507652
http://forum.xda-developers.com/showthread.php?t=494632
http://forum.xda-developers.com/showpost.php?p=3354857
So basically when you update your Radio Rom you have to update the rilphone.dll as well. Something i never did
We should also collect the correct rilphone.dll with the radio rom as P1Tater is doing in the Raphael section.
Question is where did the Radio Roms came from and do we also have the accompanying OS rom where we can axtract the rilphone.dll from?
If people do have these files, please post
The Latest radio was supplied in this rom: RUU_Trinity_CHT_3.03.751.5_6275_1.56.70.11_108_Ship.exe. Download links are down however
Honestly, I'm not going to pretend that I know what you're doing with all this. BUT, I did find your ROM you were looking for. I hope this helps, and I hope it makes our Trinity's run better some how.
Original Place I found it:
RapidShare
My Mirror:
MediaFire
@SuperSport
Sorry, but your file is RUU_Trinity_CHT_3.00.751.10_6275_1.50.08.11_108_Ship.exe and we are looking for RUU_Trinity_CHT_3.03.751.5_6275_1.56.70.11_108_Ship.exe.
mac_es said:
@SuperSport
Sorry, but your file is RUU_Trinity_CHT_3.00.751.10_6275_1.50.08.11_108_Ship.exe and we are looking for RUU_Trinity_CHT_3.03.751.5_6275_1.56.70.11_108_Ship.exe.
Click to expand...
Click to collapse
Ahhh..... I'm SO Sorry! I googled a bit and this jumped up. Without enough sleep, I missed those important parts.
I'll look again, and if I find them, I'll replace the original links.
The only thing I've found so far is this SkyDrive link, but I cannot download!
Maybe because I'm in the US? Can somebody else try and see if they can get this? Thanks.
SkyDrive Link
http://cid-8231c261cbdd4326.skydriv....751.5|_6275|_1.56.70.11|_108|_Ship.part1.rar
Received a link to the rom from Lalle. Will upload the files this evening
link: http://rapidshare.com/files/22622665...1_108_Ship.exe
adejager1 said:
Received a link to the rom from Lalle. Will upload the files this evening
link: http://rapidshare.com/files/22622665...1_108_Ship.exe
Click to expand...
Click to collapse
Your link got shortened. Can you repair the link? Thanks!
Actually, the SkyDrive links just started working. Downloading now.
SuperSport said:
Your link got shortened.
Click to expand...
Click to collapse
Hate when that happens
http://rapidshare.com/files/226226657/RUU_Trinity_CHT_3.03.751.5_6275_1.56.70.11_108_Ship.exe
Ril.dll files
Ril files corresponding to the 1.56.70.11 radio. Taken from RUU_Trinity_CHT_3.03.751.5_6275_1.56.70.11_108_Ship.exe
Ril files corresponding to the 1.50.08.11 radio. Taken from RUU_Trinity_CHT_3.00.751.10_6275_1.50.08.11_108_Ship.exe
Ok, now that we have the files... Can I just copy them to my SD Card and my phone will now bake pizza or make popcorn? You know, the important stuff...
What will the benefit from this be? Better Battery Life, Better Connection, Better GPS?
Don't know about you, but i hope that my coverage improves and that my phone doesn't disconnect when i switch from an 3g to a gsm network. Going to build some cabs to install the files.
For the more wonderful stuff, maybe i can positively influence my balance on my bank account the next time i walk past a ATM
Arjan
Hi Guys,
I've just tried the ril*.dll's , before that i've upgraded my Radio rom to 1.56.70.11, so the versions match, tried the GPS but without leaving my apartment , so as before, made a few phone calls, but when i tried to send some smses nothing !!! i could't receive too, so i had to delete the two files and SR , the original ones were restored !!! Anyone else with an overview ?
Th3Hunter said:
Hi Guys,
I've just tried the ril*.dll's , before that i've upgraded my Radio rom to 1.56.70.11, so the versions match, tried the GPS but without leaving my apartment , so as before, made a few phone calls, but when i tried to send some smses nothing !!! i could't receive too, so i had to delete the two files and SR , the original ones were restored !!! Anyone else with an overview ?
Click to expand...
Click to collapse
Did you try patching the nk.exe or signing the files? I'm not sure what all that means , but I read it in one of the forums listed on the first page.
Hello guys
I have read all your post and link to Raphael threat , Da_G recommandation , but i don't know which benefit for our old trinity .
We have rilgsm (older) and not rilphone (newer) .
Be carrefull with ril.dll , it's a file in SYS (build) in RedistPhone folder , you can't change only this file from an other OS : so WM 5 or 6 or 6.5 and i seen also praticaly each OS has a ril.dll different .
SuperSport said:
Did you try patching the nk.exe or signing the files? I'm not sure what all that means , but I read it in one of the forums listed on the first page.
Click to expand...
Click to collapse
No, I didn't sign them, because i do not edit them, pathing the nk.exe means nothing to me ?? For now i'll stop experimenting , maybe someone clever will come up with a solution
ok, lots of speculation going on here,
can someone pls clarify:
- where do you need to copy the dll to?
- what is the risk of doing that?
- how do you revert back?
- what if you don't do it?
thanks
chanvi93 said:
Hello guys
I have read all your post and link to Raphael threat , Da_G recommandation , but i don't know which benefit for our old trinity .
We have rilgsm (older) and not rilphone (newer) .
Be carrefull with ril.dll , it's a file in SYS (build) in RedistPhone folder , you can't change only this file from an other OS : so WM 5 or 6 or 6.5 and i seen also praticaly each OS has a ril.dll different .
Click to expand...
Click to collapse
so, chanvi, you're suggesting NOT to play around with this whole rillgsm/rilphone/ril.dll thing?
Cellcore
I first started this thread because i was unhappy with the performance of my trinity in combination with new (non original but cooked) roms.
The symptoms:
* When you dial a number you only hear 3 short beeps and the call is ended. The change of this happening is bigger when you are on a 3g network.
* you have missed calls without the phone ringed
* SMS messages don't send
* if you try to manually set the provider you will get an error "Unable to connect to the network. Try to...."
All this time the phone displays full coverage.
When i read the posts mentioned in the first tread I thought this could be the reason for this behavior.
So i started experimenting with with ril.dll. I copied ril.dll and rilgsm.dll into the kitchen from Chanvi93&Oggi and flashed my trinity. The result where excellent what calling concerned, but some other functions on the phone didn't work any more. unable to sent and receive SMS, strange active sync behavior, Unable to use SIM manager.
On other forums i read about the dependence of dll's from the Cellcore so my investigation moved to the entire Cellcore.
http://msdn.microsoft.com/en-us/library/aa922988.aspx
Again i used the kitchen from Chanvi93&Oggi to experiment and found that i had to copy the following dll's from the original Chinese CHT9100 rom to the kitchen to get optimal results:
ccoredrv.dll
ril.dll
rilgsm.dll
siminit.dll
simtkit.dll
tkitapp.exe
InvokeSIMMgr.dll
I also copied the latest Sim manager i found in this post
http://forum.xda-developers.com/showpost.php?p=3585911&postcount=12
With this files copied over the files in Chanvi93&Oggi's kitchen i get optimal results.
I attached the files in a zip. These files correspond with the 1.56.70.11 radio rom. These files cannot be copied to the phone but need to be cooked into the rom
adejager1 said:
I first started this thread because i was unhappy with the performance of my trinity in combination with new (non original but cooked) roms.
The symptoms:
* When you dial a number you only hear 3 short beeps and the call is ended. The change of this happening is bigger when you are on a 3g network.
* you have missed calls without the phone ringed
* SMS messages don't send
* if you try to manually set the provider you will get an error "Unable to connect to the network. Try to...."
All this time the phone displays full coverage.
When i read the posts mentioned in the first tread I thought this could be the reason for this behavior.
So i started experimenting with with ril.dll. I copied ril.dll and rilgsm.dll into the kitchen from Chanvi93&Oggi and flashed my trinity. The result where excellent what calling concerned, but some other functions on the phone didn't work any more. unable to sent and receive SMS, strange active sync behavior, Unable to use SIM manager.
On other forums i read about the dependence of dll's from the Cellcore so my investigation moved to the entire Cellcore.
http://msdn.microsoft.com/en-us/library/aa922988.aspx
Again i used the kitchen from Chanvi93&Oggi to experiment and found that i had to copy the following dll's from the original Chinese CHT9100 rom to the kitchen to get optimal results:
ccoredrv.dll
ril.dll
rilgsm.dll
siminit.dll
simtkit.dll
tkitapp.exe
InvokeSIMMgr.dll
I also copied the latest Sim manager i found in this post
http://forum.xda-developers.com/showpost.php?p=3585911&postcount=12
With this files copied over the files in Chanvi93&Oggi's kitchen i get optimal results.
I attached the files in a zip. These files correspond with the 1.56.70.11 radio rom. These files cannot be copied to the phone but need to be cooked into the rom
Click to expand...
Click to collapse
Hi
this looks interesting why dont u u/l your modified rom and let us try
sohil said:
Hi
this looks interesting why dont u u/l your modified rom and let us try
Click to expand...
Click to collapse
Because i don't have any ambitions to become a cook

Categories

Resources