All,
I have a MDAIII flashed with the latest iMate ROM running TomTom 5.1. The problem I have is that while using TomTom 5.1 the application closes by itself and unloads from memory. This is really annoying can anyone tell me why this is happening? I am using a Holux 236 GPSlim Bluetooth.
Thanks
Msuk
Hiya,
The same problem here but with TomTom 5.0...
I flashed my MDA III with the latest iMATE ROM (1.40) and Radio 1.13...
...now TomTom closes itself, when I am trying to change map colours, when trying to zoom in or out on the map or after a minute or so when working with the BT GPS...
ANYONE???
Hi,
I reflashed my phone over the weekend using the iMate 1.40 ROM and then installed TomTom 5.0 upgraded to 5.1 and so far it is running ok - hmm odd.
Thanks
Msuk
maybe be poi
Try disabling POI and see if that helps
Does the patch to 5.1 resolve the lack of on-screen keyboard missing?
I have to resort to using the slide down hardware keyboard and have difficulty getting numbers for postcode input!
Anyone got a solution?
JC
Hi there guys, for all the problems here on tomtom you will find if searched on the forums all your answers, but as for the on-screen keyboard yes 5.1 resolves this, so go ahead and update it!
as for the crashing it is the poi that is doing this, make sure you have installed a good version of TT5 and there is a patch for the poi problem on this forum and on the ftp site. if you search for the poi patch you will definatly find it.
I have TT5 and my MDA III and it works perfectly (touch wood) with my leadtek bluetoth gps reciever on WM 2003, i could'nt for the life of me get it working on WM2005 so i had to downgrade, maybe il upgrade again when it is a bit more stable.
So all you guys, search and destroy the problem!!
Ash
Gyus! every body that have problem with the new ROM (1.40) & TT5 I strongly advise to replace the poi.dat file in teh maps directory to this one: ftp://ftp.xda-developers.com/Uploads/Blueangel/TomTom5/poi.dat
It worked for me... no more crashes... :lol:
Spanish POI..?
He3eK said:
Gyus! every body that have problem with the new ROM (1.40) & TT5 I strongly advise to replace the poi.dat file in teh maps directory to this one: ftp://ftp.xda-developers.com/Uploads/Blueangel/TomTom5/poi.dat
It worked for me... no more crashes... :lol:
Click to expand...
Click to collapse
I just did this and now I have what appears to me Spanish POI on my Tomtom..? Or did I just do it wrong..?
Like a fool, I didn't copy my existing POI and I just overwrote it!
Lesson learnt here folks is to make sure you can get back to where you were!! :lol:
Oh well, I'll fix it tonight when I get home!
POI.DAT ITA !!!
HI GUYS....
HELP ME PLEASE !!!
i have a problem with my qtek 9090 (rom v. 1.40.04 ITA; ext rom v. 1.40.153 ITA; radio rom 1.12.00) and tomtom 5.10. I have installed first tomtom 5.00 and then the upgradeto 5.10. I have installed ITALY PLUS MAP (309mb). In some place the tomtom software disconnect the gps connection and unload itself from memory. I have disabled PDI (POI) and now tomtom in that place doesn't unload itself from memory. But if i want POI function ??? Could I use the POI.DAT file linked in this forum ?? That file is good for my italian
version ??? If not where can I dowload the file POI.DAT for my italian version ???
Thank you so much !!!!
That link for the POI patch doesn't work??
Jupiter
...mate, the file is still there.... try different approach, go to the FTP manualy, then go to Uploads/Blueangel/TomTom5/, & download the POI.DAT file. (I'll try to attach it to this message anyway...)
r_grieco
From what I understood the poi patched file uses existing points of interest of your mashine, but if you'll try to search for some poi you won't be able to find it...
Any how, try it, it might help. Gust make a backup copy of the original POI.DAT file.
Everybody
I've upgraded to 5.10 & all the issues are gone, I have onscreen keyboard + the built in keyboard works absolutely fine & the original POI file works with no problems whatsoever.
P.S.
I use Great Britan maps...
I tried to do the upgrade to 5.10 and it just went on & on forever, I had to do a ctrl+alt+del to stop it!
I'm guessing I may have installed TT5 incorrectly in the first instance despite this, it works fine but no on screen keyboard and Brands Hatch doesn't exist!!!
JC
datasafe
If you want PM me I'll sed you *.CAB files of the upgrade.
I haven't used the PC wizzard to upgrade my TT5 to 5.10, so I don't know if there are any issues with it... ...or I just have a special version... :twisted:
htp
i have tried to get to the ftp site but it never works
Sure there must be a key to this
I tried to download the file but it locked me out and i had to reinstall tomtom 5
if anyone has got 5.1 or knows why i cant get it from ftp would welcome as this keyboard **** is driving me mad
clive
sorted
Sorted, need the 5.1 with patch got it!
I dont know how to post it so if you want to inform i will post it, if not email me
clive
To enyone looking for the "PROPER" upgrade to TomTom 5.10, I have uploaded it to: http://www.megaupload.com/?d=5THJ0DO4
Have Fun :twisted:
I'm using laser m500 (eten) in Thailand & we still didn't get any wm5.0 upgraded here. Last week I found this program (msi blueplayer) and hope it can be use for running the stereo bluetooth in wm2003 .
After I install this in my ppc. It look ok because this program ask me to start bluetooth manager if I use it.
but it can't find my itech s38 . Could anyone here can help me for this? Thank in advance.
http://www.msi-technology.de/support/dl_soft.php?sort=Jahr DESC,Monat DESC&start=0
Hi Guys,
Hope someone can help me with this one (apologies if I'll use incorrect terms, but I'm a newbie).
I have a Qtek 9090 with WM2003SE installed (ROM 1.40.04 and Radio 1.12.0) with Bluetooth Broadcom 1.0.0 build 3900.
I'm trying to use a Metasystem Metablue BT car kit, but after succesful pairing Qtek9090 cannot find any available service.
Dangaard is telling me that the problem is with the fact that both handsfree and headset profiles are needed and this is not supported in WM2003SE; only in WM5...
I'm basically stuck, as I do not know 1) if WM5 can be installed on my Qtek9090 (and if so, how?); 2) if the problem would then be fixed; 3) if there is any quicker solution to the problem.
Would appreciate any suggestion you guys might have on the matter!!!
Many many thanks!
Regards
Dude, read the wiki.
It explains how to prepare your PDA to use WM5, and how to load it.
Thanks SandStorm,
I did forget to mention I had a look at the wiki, but it is still unclear to me if WM5 will solve my problem with the bluetooth profiles and will therefore worth the risk of messing up with rom files.
I do have also questions on the WM5 upgrade procedure, but will post them in the appropriate thread.
Many thanks
Cheers!
Problem solved upgrading to WM5.
Thanks
Regards
Hello friends
i have a problem with my hermes when i enable my bluetooth through comm manager it will stay off after a soft reset the problem is still there but after a hard reset the problem is gone i can use my bluetooth so i installed all mine tools like navigone etc the bluetooth is still working but after 2 or 3 days the problem comes back i dont know how iam using schaps 3.60 and i need my bluetooth can some one please help me
ps when i want to search for other device i got a error message "problem with bluetooth hardware" i dont believe it is a hardware fault because after a hard reset i can use it again but then i must install al my software again
please please help me
I would go to thte thread dedicated to Schaps 3.6 rom. You will find that bluetooth issues are known and (I think) may have a solution available.
WB
Hello guy`s i have question and hope someone to help me with this solution!
So befor sometime i flash my HD and now im using a Davideuck v5 ROOM and after this also i flash my Radio Version to 1.13 .. all is fine the phone work perfect and is very fast also with the new Radio Version i can say that is more than perfect i have very strong network signal and the other items that use the radio work without a problem and more faster.
But i found after all this flashing that my Bluetooth not work like befor.. i think that when i Flash my phone with Davideuck v 5 or the new Radio 1.13 my Bluetooth change also.. im not very sure from witch one but the problem is that i can`t recve files via Bluetooth!
So betwen My HTC HD and my Brother with are with the same room and radio not have any problem and we both can send and recive files but i try with few diferent phones like Samsung, SE, and Nokia i can`t recive anything any kind of file.. the device when searchng for bluetooth can found me and see me but can`t send me anything and give some kind of problem like "Can connect with the device" etc.
Befor to flash the both phones i was able to recive files from this other phones and now i can`t...
Other way befor few day`s i buy a Bluetooth hands free that was with Version 2.00 and i can use my bluetooth hands free without a problem...
Also i can send files by Bluetooth to every other phone without a problem i just can`t recive from them.. so i think my Bluetooth Version was changing too after this flashing things.. because not have any point i to be able to send files just the other phones to can`t conect with me.. and i think if i try this with phones that have Bluetooth v 2.0 i will not have any problem to recive or send.. but many of the phones are with older Bluetooth versions and befor all this flashing there have not any problem like this i was able to do everything!
On the same time i really like my new radio 1.13 because work perfect for me and i see that worth it.. also the Davideuck v5 room for me is simple the best for now so i wana keep use this just some advice or help how i can fix this problem?
Maybe many peoples like me who flash the phones with the new radio version 1.13 have the same problem, maybe someone cam edit the new Radio Version 1.13 all to be good only the Bluetooth to be defauls like in the stock HD room.
On the same time befor a week i test another things i try to send file via bluetoth from another HTC older model and when we try conection on the other HTC device with is not HD but i forgot what model was was writen when we try to conect " the devices not support OBEX capable" or something like this for 1st time i see this OBEX and i don`t know what exactly mean!
So any of you who have the same problem.. or know the desigion of this problem can write me here!
Thanks in advance and hope someone to be able to fix that problem!
Regards
P.S the problem is solved and the OBEX is enabled so .. the Moderators can close this post!
Thanks