Develop Bugs

Qtek 9000 Shipped ROM now on FTP

MMB was kind enough to post the Qtek 9000 ROM here:
http://s5.yousendit.com/d.aspx?id=12XDPY08OSB2R0PAMI3W42KE3Q
And I will be uploading it to the FTP for everyone else in case the above link expires:
/Uploads/Universal/Shipped ROM/
Even though it has the "latest" ROM date and version number, I seem to be having continuous issues with my Qtek 9000 in the fact that some of my settings refuse to stick:
I have to constantly re-pair my HS850 Bluetooth headset and my GlobalSat BT-338 GPS.
I have to occasionally associate my device to my Wi-Fi router and re-enter my WPA-PSK key.
I have since flashed my device with the JASJAR ROM and the O2 Radio ROM, and customized the JASJAR's Extended ROM to see how much better it performs.

Hi,
Can anyone tell me how I can use this ROM with the NoID installer. Again I need to bypass the country code error generated by the .exe installer.
Or explain to me where these installers "unpack" their files to so I could try and locate them and use the NoID installer from there?
Michael

now only if we can get the english orange rom aswell....

BeyondtheTech said:
MMB was kind enough to post the Qtek 9000 ROM here:
http://s5.yousendit.com/d.aspx?id=12XDPY08OSB2R0PAMI3W42KE3Q
And I will be uploading it to the FTP for everyone else in case the above link expires:
/Uploads/Universal/Shipped ROM/
Even though it has the "latest" ROM date and version number, I seem to be having continuous issues with my Qtek 9000 in the fact that some of my settings refuse to stick:
I have to constantly re-pair my HS850 Bluetooth headset and my GlobalSat BT-338 GPS.
I have to occasionally associate my device to my Wi-Fi router and re-enter my WPA-PSK key.
I have since flashed my device with the JASJAR ROM and the O2 Radio ROM, and customized the JASJAR's Extended ROM to see how much better it performs.
Click to expand...
Click to collapse
I am currently using the Jasjar ROM / Extended Rom and the O2 Radio rom. No real issues so far. I am not sure I should try the update of the Qtek 9000 ROM looking at your comments above.

But is in Italian or English? thx

Unit only display "Serial v1.00" after Qtek ROM fl
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael

Re: Unit only display "Serial v1.00" after Qtek RO
michaelg said:
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Click to expand...
Click to collapse
Try to reflash again, but this time only use the Radio Rom 1.04.02

How can I extract the shipped ROM from my unupgraded UK TMobile MDA Pro?
I will post it up after extraction in case anyone needs it.

stanthebiker said:
How can I extract the shipped ROM from my unupgraded UK TMobile MDA Pro?
I will post it up after extraction in case anyone needs it.
Click to expand...
Click to collapse
See here http://forum.xda-developers.com/viewtopic.php?t=34552&highlight=

Re: Unit only display "Serial v1.00" after Qtek RO
michaelg said:
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Click to expand...
Click to collapse
Hi,
take a look to your pm or look at this:
http://forum.xda-developers.com/viewtopic.php?t=33191
Teja

Hi,
Yes it seemed that a radio only (v 1.04.02) ROM flash got the unit working again.
I did have the SIM and SD card out for several ROM flashes prior, but maybe the combo of all 3 (no SIM, no SD and radio only) was the trick.
Regards
Michael

michaelg said:
Hi,
Yes it seemed that a radio only (v 1.04.02) ROM flash got the unit working again.
I did have the SIM and SD card out for several ROM flashes prior, but maybe the combo of all 3 (no SIM, no SD and radio only) was the trick.
Regards
Michael
Click to expand...
Click to collapse
That is good news. Please let us know how the ROM of the Qtek performs. Currently I am using the Jasjar rom with the O2 rom. No real issue so far.

michaelg said:
Hi,
Can anyone tell me how I can use this ROM with the NoID installer. Again I need to bypass the country code error generated by the .exe installer.
Or explain to me where these installers "unpack" their files to so I could try and locate them and use the NoID installer from there?
Michael
Click to expand...
Click to collapse
If you have WinRAR or WinZip installed, right-click on the executable and choose Extract to [folder]...
Then you can throw in the MaUpgradeUt_NoID.exe file in the same folder and run it.
Someone also said you can add a line [CHECKCEID_TYPE]=1 in the RUU.conf file using Notepad, but I don't think it made a difference for me.

Hi,
Actually the last ROM I flashed was the JasJar so I'm back to square one, but I intend to try the QTek again in a couple of days (just need to settle the nerves a bit after the horror of owning an expensive brick for several hours).
In regards to unpacking the .exe files, I stumbled across that trick with WinRAR myself and I was a little surprised myself. That would make upgrading from other sites so much easier especially with access to the NoID installer.
I might try the NoID and the RUU.dll trick to bypass country code to see if both work (if my heart can stand the strain of more repeats of the brick event).
At the moment I've got a prepaid vodaphone SIM (here in Australia) and I'm working on setting that up. I've been advised that full mobile broadband is only available for billing customers so I'll have to wait until I can visit a shop to sign up and try that.
If anyone has the settings already for vodaphone let me know!
Michael

MDA PRO Qtek ROM
at the moment i am using this QTEK rom.
Just upgraded my MDA PRO and now i am using it.
It is one of the best roms because no programs/logos of O2 / T-Mobile etc. And it runs very fast, dialskin is normal windows (not the one of O2)
I am very happy with it at the moment,
only thing i want is an sim unlock tool so i can use my vodafone sim in the phone!

I AM IN HELL PLEASE HELP!!
Hey guys.
please be gentle with me . . ok so i got the rom . . .
tried to do the upgrade - the damn thing is stuck on the splash screen and will NOT progress
just shows
R. 1.00.02
G 42.33.P8
D 1.12.42 WWE
Now I got the ma upgrade no id thing - but cannot use the bloody thing now!!!
please help, if my mrs finds out she will chew me up!
pleeeaaassseee help!!!
cheers
lr

RADIO v1.03.00 required!!
Hi!
Can somebody extract the QTEK 9000 shipped RADIO v1.03.00 out and post here?
The reason being if after upgrading to the RADIO (from Dopod 900) v1.04.02 and finding it unsuitable later on I would like to re-flash it with the original shipped RADIO.
Thanks

http://www.beyondthetech.com/downloads/phone/upgrades/
I put the JASJAR, QTEK, and XDA EXEC Upgrade Utilities there. Just download the one you want, right-click and extract the files with WinZip or WinRAR...

I'm stuck pon the accursed splash screen - tho i can get bootloader up .. any ideas what i can do?

RE
Hi BeyondtheTech
Thanks.
One question. How to flash the RADIO only?
Thanks again

Internal GPS doesn't work with German ROM

I have a locked CID P3300, and today I could upgrade to wm6 using a great post in these forums, but when I installed TomTom6 and selected Internal GPS, TomTom indicates that no GPS was found, when I upgraded my device radio and ext rom couldn't be upgrade due upgrade restrictions, maybe this files doesn't upgrade are desabling my Internal GPS?
Thanks

Try to select in TomTom: the other NMEA GPS reciever.
At baudrate 4800 and on COM 4 TomTom is working great for me.

Pocha said:
I have a locked CID P3300, and today I could upgrade to wm6 using a great post in these forums, but when I installed TomTom6 and selected Internal GPS, TomTom indicates that no GPS was found, when I upgraded my device radio and ext rom couldn't be upgrade due upgrade restrictions, maybe this files doesn't upgrade are desabling my Internal GPS?
Thanks
Click to expand...
Click to collapse
hi there strangely enoough I have the same problem GPS does not work anymore.. to make it even worse I have flashed a T-Mobile WM5 ROM back and NO GPS and before I had GPS with this ROM, I tried HTC ROM, T-Mobile, DOPOD AND with all NO GPS! this is very weird!
Pocha can you try to flash a WM5 rom back an tell us if your GPS worked again?

rowley birkin qc said:
Try to select in TomTom: the other NMEA GPS reciever.
At baudrate 4800 and on COM 4 TomTom is working great for me.
Click to expand...
Click to collapse
What ROM are you using?

At this moment I'm downgrading to wm5 I hope in 15 mins all process finished in good way... then I will test TomTom while I crossing my fingers...

Pocha said:
At this moment I'm downgrading to wm5 I hope in 15 mins all process finished in good way... then I will test TomTom while I crossing my fingers...
Click to expand...
Click to collapse
Ok I hope yours will work again after the WM5 downgrade! mine did not unfortunatly! but it can also be bad luck and my chip just did and it has nothing to do with upgrading..
If you need any rom please feel free to contact me..

I had some trouble with the rom also, GPS, WIFI..
I have a Dutch MDA III C originaly..
I got everything working by flashing is like so:
WM5 UK tmo -> WM6 O2 German. Stop at screen settings at first run of german rom -> Run WWE rom, complete install. -> Install Cert_SPCS and EnableRapi TO Internal storage, run Dutch WM6 rom..
Now got WIFI and GPS working..
Any other way of flashing get me stuck at boot or without GPS, WIFI or BT..
Camera works fine, speed is ok.. Seems faster then WM5.. But time will tell..
Thumbs up to the the maker of WWE and Dutch rom..

sandoval said:
I had some trouble with the rom also, GPS, WIFI..
I have a Dutch MDA III C originaly..
I got everything working by flashing is like so:
WM5 UK tmo -> WM6 O2 German. Stop at screen settings at first run of german rom -> Run WWE rom, complete install. -> Install Cert_SPCS and EnableRapi TO Internal storage, run Dutch WM6 rom..
Now got WIFI and GPS working..
Any other way of flashing get me stuck at boot or without GPS, WIFI or BT..
Camera works fine, speed is ok.. Seems faster then WM5.. But time will tell..
Thumbs up to the the maker of WWE and Dutch rom..
Click to expand...
Click to collapse
I have a MDA Compact III to, but the strange thing is that when I install the UK T-mobile rom and then try Tomtom it still does not detect a GPS device as it used to do! it always worked on the T-mobile rom and now all of a sudden it stopped working..

Downgrade finished right, now I have again wm5 and my TomTom works fine again, uffff !!!
I reviewed GPS Settings:
GPS program port: COM4
GPS hardware port: (None) Baud rate: 4800
Yes Manage GPS automatically.
This weekend I will try again to upgrade to wm6, and I will use this settings to check if GPS works fine...
Device Info:
ROM Version: 1.12.405.1 WWE
ROM Date: 9/12/06
Radio version: 02.67.90
Protocl version: 4.1.13.28
ExtRom version: 1.12.412.101
I used HTC_1.12.405.01_026790_WWE_SHIP to do the downgrade

I have the same problem, my GPS doesn't work any more, with NO GPS app! I have a German HTC and flashed the German O2 image. Downgrading is kinda difficult, didn't work. Does anyone have a German WM5 Rom? I'd rather put the old one back on there until a working GPS enabled version is out.

rvbcrs said:
I have a MDA Compact III to, but the strange thing is that when I install the UK T-mobile rom and then try Tomtom it still does not detect a GPS device as it used to do! it always worked on the T-mobile rom and now all of a sudden it stopped working..
Click to expand...
Click to collapse
Wierd, do you have the original Tomtom shiped with the HTC?? I have a install cd from t-mobile, works fine if I flash from art_tmouk_11311001_024990_wwe_ship to German O2 to Dutch custom.. Any other way of flashing then wifi, BT and GPS don't work on my device..

Did you installed some GPS app such us GPS viewer, or a navigation program such us TomTom?, because in WM6 Dutch Rom by bepe you will find in system sheet an icon called External GPS, there try to use the settings that I wrote in last post, and then use some GPS program to verify if GPS works or not...
Good Luck

My GPS is working after a soft reset, I think I messed up something with the ports, I use GPS Gate. Now everything is ok!!!

I have upgraded my HTC P3300 CID-Locked to WM6 and GPS, WiFi and Bluetooth are all working nicely. I am using iGO GPS application as well as several others.

Please tell us, wich wm6 did you used?, when I upgraded my HTC-P3300, I used WM6 Rom by bepe, but since my HTC is CID-Locked I only could upgrade OS using a post in these forums which talk about that... btw this weekend I will try again to upgrade to wm6 and then I will use GPS settings that I post before, and this time I will install those CAB (rapi and other CAB file which appears in procedure)

Check out my blog post of upgrading to WM6.
Hope it will be usefull.

WM6 and TomTom

Hi,
I have a french HTC P3300 that is delivered with TomTom.
Unfortunately, TomTom is included in the WM5 rom.
I would like to flash to WM6 but will I loose TomTom?
If yes, can i retrieve it in any way with the serial number?
Or is there a way to dump my WM5 rom with TomTom to be able
to downgrade to the original form in case of problem?
My HTC is not locked on any provider, I bought it on amazon.
Thanks

nickytheshaft said:
Hi,
I have a french HTC P3300 that is delivered with TomTom.
Unfortunately, TomTom is included in the WM5 rom.
I would like to flash to WM6 but will I loose TomTom?
If yes, can i retrieve it in any way with the serial number?
My HTC is not locked on any provider, I bought it on amazon.
Thanks
Click to expand...
Click to collapse
I would have thought that Tom Tom comes on a micro sd card rather than as part of the rom.
Otherwise any update now or in the future would be futile as you will lose it.
Has the phone got a memory card in it?
If yes use active sync to browse to the storage card
do you see any cab files for tom tom on there?
let me know and I wil try and help.
alternatively contact tom tom and tell them your serial number and I have been told you can download tom tom software free but just need serial number to use it and also have the maps.
Finaly if it indeed is stored on the phone are you sure it isnt on a disc of some sort that cam with the device.
I will try and help whre possible but give more detail in your post. ie what you have tried etc

Si tu n'as plus tomtom intégré dans la nouvelle rom, tu peux installer l'installeur officiel. Si tu ne le trouve pas, je peux te l'envoyer.
Ce que je me demande, comme toi sans doute, c'est si un carte achetée et activé sous la ROM WM5 marchera toujours... Bref, le numéro de série, restera-t-il le même ?

magpie2000k, I baught my micro sd seperately so I donn't think that i'll find any cab on it exept the one of the tomtom upgrade. I am at my office and don't have activesync here, i'll try when I get home this evening.
I have a cd delivered with my phone, and with a wm5 sn on it, could it be a restor disc? how can i check if there is in fact the install for tomtom on it?
DrakkoFR, i'll stay in english as it is the rule of the forum. The official install could be interesting. I don't have it so i would be interested in it. But how can I register on the TomTom site for futur updates? And yes, i don't know if the maps will be recognised.
Tank you both for your answers.

The easiest way:
copy all the files from \Program Files\Navigator to Storage Card\Program Files\Navigator.
After flashing just create shortcut (using i.e. resco Explorer).
This will keep all your settings and maps activation. And you will save up some space and a time...
I done like this and it works on my xda orbit.
There is no need to install tomtom any more.

How to upgrade to WM6 and keep supplied TomTom
nickytheshaft said:
Hi,
I have a french HTC P3300 that is delivered with TomTom.
Unfortunately, TomTom is included in the WM5 rom.
I would like to flash to WM6 but will I loose TomTom?
If yes, can i retrieve it in any way with the serial number?
Or is there a way to dump my WM5 rom with TomTom to be able
to downgrade to the original form in case of problem?
My HTC is not locked on any provider, I bought it on amazon.
Thanks
Click to expand...
Click to collapse
There is a working solution nicktheshaft, I use this to run tomtom all the time no problems, and it basically allows you to run tomtom from the memory card with no instal to your p3300, saving about 5mb of ram also.
1-With your WM5 rom loaded simply copy the folder tomtom from your p3300 (my device/program files) to your memory card root, (the folder should contain tomtom navigator.exe, data chk file etc.)
You can test this by uninstalling tomtom after you have copied the tomtom folder to sd card, then running tomtom from this folder on sd card, i.e tomtom navigator.exe
You then upgrade to WM6 and create a shortcut from the folder on your memory card (create a shortcut from tomtom navigator.exe in this new location on your memory card, and put it in my device/windows/start menu/programs), you will then be able to assign a button to launch tomtom from the settings menu.

thank you all for your advises...
I think I am soon going to flash to WM6 )
Is the flash easy? Do I just run the update or must I Unlock the CID knowing that my HTC is not operator locked?

gadjet said:
There is a working solution nicktheshaft, I use this to run tomtom all the time no problems, and it basically allows you to run tomtom from the memory card with no instal to your p3300, saving about 5mb of ram also.
1-With your WM5 rom loaded simply copy the folder tomtom from your p3300 (my device/program files) to your memory card root, (the folder should contain tomtom navigator.exe, data chk file etc.)
You can test this by uninstalling tomtom after you have copied the tomtom folder to sd card, then running tomtom from this folder on sd card, i.e tomtom navigator.exe
You then upgrade to WM6 and create a shortcut from the folder on your memory card (create a shortcut from tomtom navigator.exe in this new location on your memory card, and put it in my device/windows/start menu/programs), you will then be able to assign a button to launch tomtom from the settings menu.
Click to expand...
Click to collapse
That's what I wrote... one post above yours...

nickytheshaft said:
thank you all for your advises...
I think I am soon going to flash to WM6 )
Is the flash easy? Do I just run the update or must I Unlock the CID knowing that my HTC is not operator locked?
Click to expand...
Click to collapse
Mate you must run USPL first then your rom of choice.
USPL removes the CID problem and then flashing should be a breeze.
Note that when flashing with USPL you device will return to what apperas to be a normal state (ie it lokks no different and has all contacts etc intact.)
This put me off at first because I couldnt see that there was any difference. I have now flashed a number of devices and used USPL over 30 times and not once have I had any problem at all. If in doubt read the idiots guide thread I think about half way down on the first page is a full written process of how to do it. Follow it and all will be well.
I am using B&B 3.7 from Tom and it is great has no issues with TOMTOM working. yes it has one or two very minor bugs that irritate rather than annoy. But these are certainly acceptable for the benefits of the WM6 and the rom interface that it has.
Photo contacts is a dream.
Shortcuts to everything you need. I very rarely use the stylus now even my fat fingers can navigate through and it becomes a truely one handed device.
When I had original rom i had to use stylus all the time. Thanks to Tom that to some extent is a thing of the past. Still use stylus for writing texts and emails but thats about it.
good luck and I am sure you will not be dissapointed.

Maybe i'll give it a try.
What are these little bugs?
Does the VOIP work on this version?

nickytheshaft said:
Maybe i'll give it a try.
What are these little bugs?
Does the VOIP work on this version?
Click to expand...
Click to collapse
Questions questions questions
The bugs are minor.
In the dial pad you have to go into call history to redial last number. There is a fix but you lose the lovely large buttion dial pad I beleive (its no great shakes.)
when typing a phone number iut is green in dial pad and not easy to see what you have typed. again very livable and probably a fix somewhere ie a registry tweak or something. As I normally dial numbers of people in my address book it very rarely causes me a problem.
The others for what they are I cant remember you tend to find work arounds that in time become the norm and then arent bugs at all if you catch my drift.
I dont believe you will regret it.
VOIP works for me

thanks magpie2000k, i'll give it a shot this evening if i have time.

nickytheshaft said:
thanks magpie2000k, i'll give it a shot this evening if i have time.
Click to expand...
Click to collapse
Youre welcome
this is the idiots guide link
http://forum.xda-developers.com/showthread.php?t=311650

Oooops..
goblinIT said:
That's what I wrote... one post above yours...
Click to expand...
Click to collapse
Appologies goblin, when i read the thread you answer was not there (10:07am), and i was repling from work and it took me 20 mins to complete my reply (10:21am).
At least we are all here to help all at XDA-Developers though...

damn, just tried tom's rom and it failed at 3%
i'll try later again, i have to go out.
cheers

nickytheshaft said:
damn, just tried tom's rom and it failed at 3%
i'll try later again, i have to go out.
cheers
Click to expand...
Click to collapse
link here :
http://forum.xda-developers.com/showthread.php?t=317876

Hello,
I'm quite new here and find this website very usefull
Is it possible to switch from a WM5 french version to a WM6 english one?
Thanks,
Alex

Alx007 said:
Hello,
I'm quite new here and find this website very usefull
Is it possible to switch from a WM5 french version to a WM6 english one?
Thanks,
Alex
Click to expand...
Click to collapse
yes, it always is. just don't forget to flash your device first with pof's USPL. then you can flash it with any rom you want. what french rom do you have? is it htc french rom? or m650? with the htc rom you may not have any probs, but i'm not really sure with m650, it usually has problems with gps functionality when flashing with a different rom. but just to be on the safe side, it is always useful to have a backup of your original rom, incase something goes wrong.
and NEVER, NEVER, NEVER forget.... number one rule: ALWAYS flash your device with pof's USPL each time you want to flash your device with another ROM.

redski said:
yes, it always is. just don't forget to flash your device first with pof's USPL. then you can flash it with any rom you want. what french rom do you have? is it htc french rom? or m650? with the htc rom you may not have any probs, but i'm not really sure with m650, it usually has problems with gps functionality when flashing with a different rom. but just to be on the safe side, it is always useful to have a backup of your original rom, incase something goes wrong.
Click to expand...
Click to collapse
Thank you
Yes, I have the HTC french rom. My device is unlocked.
Regards,

Alx2007
no prob.
hope everything goes fine for you. even if your phone's unlocked, if you had problem flashing the rom, try pof's. it does work wonders!

I will pay for a WM6 ROM for hx2795 that really works

Hy Guys, I was looking at the thread in the forum, I need a WM6 ENG Rom for IPaq hx2795 that really works. I can pay by PayPal, let me know who has it or can generate it. I am really tired of WM5, it is very slow and freezes all time. Tks.

Maybe to give a try to kozhura's AKU3_52_hx2000 (WM 5.0 English) for IPAQ hx2000 series. I tried it to my hx2490b and is faster than the original. Look at this thread:
http://forum.xda-developers.com/showthread.php?t=326214&highlight=hx2000
I think works for your device, and someone allready try it.

Russian developers don't sleep....
WM6 for HP iPAQ 2*** series

Very good news!! Thanks a lot

The link to the russian ROM for IPaq hx2*** series does not work... anyone else has any clue where I may find a valid ROM for the hx2795 ? tks.

nunesfl said:
The link to the russian ROM for IPaq hx2*** series does not work... anyone else has any clue where I may find a valid ROM for the hx2795 ? tks.
Click to expand...
Click to collapse
LOL!!!! No comments....

Sorry, it was my conexion here... I am downloading it now and will give it a try. tks.

nunesfl said:
Sorry, it was my conexion here... I am downloading it now and will give it a try. tks.
Click to expand...
Click to collapse
Hi,
How is it going, please let me know once you flashed the ROM,

hi nunesfl,
every thing works fine except A2DP, Did you give a try yet ?

This wm6.0 also has the same BUG of battery drained by automatic active sync running.
ABOUT A2DP:
I think someone here must contact Khozura, he successfully make a2dp worked on hx4700 BT either on WM5.0 & WM6.0 by special patch cab.
Please someone here who knows Khozura ask him to make a patch for hx2000, thus we can enjoy a2dp.
Please..please....
MagLite_RUS said:
Russian developers don't sleep....
WM6 for HP iPAQ 2*** series
Click to expand...
Click to collapse

Another BUG in WM6.0:
When using TCPMP player, you can not hear any audio from wmv video. Strange?? I can play and hear the same video at WM5.0.
abbaml said:
This wm6.0 also has the same BUG of battery drained by automatic active sync running.
ABOUT A2DP:
I think someone here must contact Khozura, he successfully make a2dp worked on hx4700 BT either on WM5.0 & WM6.0 by special patch cab.
Please someone here who knows Khozura ask him to make a patch for hx2000, thus we can enjoy a2dp.
Please..please....
Click to expand...
Click to collapse

I have used this rom on a hx2190, and i have found it impossible to sync my calander, being unable to use any of the windows live programs and there is no remote desktop mobie. Apart from them it seems to work

Hi all, I put it in my hx2795, the A2DP does not work, the fingerprint reader does not work, the TCPMP sometimes work and not with AVI and does not work with WMV.
I can not see the contrast and error reporting tools, I saw a post where the developer said it is a case of editing the registry but does not say where...
The boot at first time did not work I was in panic, after that took out the sd and cf, drained the battery and retried, it booted but I am afraid of rebooting it again...
I did not try Windows Live and sync calendar, hope it works...
I have tried other tools (excel, word) and it worked well.
I am not sure this ROM is stable yet, any sugestions ? should I try reflash it back to WM5 or there is anything I could do to minimize these problems and keep the WM6 ?
Please help.

nunesfl said:
Hi all, I put it in my hx2795, the A2DP does not work, the fingerprint reader does not work, the TCPMP sometimes work and not with AVI and does not work with WMV.
I can not see the contrast and error reporting tools, I saw a post where the developer said it is a case of editing the registry but does not say where...
The boot at first time did not work I was in panic, after that took out the sd and cf, drained the battery and retried, it booted but I am afraid of rebooting it again...
I did not try Windows Live and sync calendar, hope it works...
I have tried other tools (excel, word) and it worked well.
I am not sure this ROM is stable yet, any sugestions ? should I try reflash it back to WM5 or there is anything I could do to minimize these problems and keep the WM6 ?
Please help.
Click to expand...
Click to collapse
OK,
I am having the same hx2795 and I found the following
a) Active Sync is working, When I tried at first time it didn't work. After I did a hard reset then I enabled "Advanced networking" from the "USB" settings menu then it worked
b) Sync over Exchange server working fine
c) WiFi is working, I checked with WEP security
d) Bluetooth is working but A2DP is not working When I tried "High Quality Audio Profile" it says authentication failed, I never see it is asking me for the pass key, so I guess that may be the problem
e) TCPMP works fine for FLASH and AVI movies, WMV does not work because WM6 uses a higher version of codecs, so you have to use WMP or you need to replace the WM5 codecs, search through over the forum you will find a solution
f) Finger print authentication works great.
g) Windows Live and messenger is not working, it says there is no connectivity and I don't know what is the deal. But IM+ is working just fine
h) You can install Finster-WM6_RDP.cab as a Termial Service client, it is very good than the inbuilt RDP client in the original HP ROM and it allows you to connect services that use custom ports
i) ROM seems to be stable and I don't have any problem with other functionalities atleast untill now

HX2790B
hi i have a hx 2790b ipaq and is wondering if there is a WM6 Rom update for it reading this thread it seems there is for the 2000 series, but i cant find the link for wm6 for the 2000 series ipaq's any infomation is appreciated
many thanks
Ben

It works for my hx2490b. The link is here:
rapidshare.com/files/53282580/WM06.rar.html

will this work with transflash / transflash hc cards, and currently my hx2790b will not read a 512 transflash card with sd adaptor, and thats not transflash hc, as i have a 4gb transflash in my N95 and that can read it lol

Dear anavas,
I tried to reboot and reinstall as edcom suggested in another forum. WM6 is working now better and I can reboot.
I could not do 'contrast' and 'error reporting' show, any idea ?

we need some detailed instructions for wm6 on a HX2790b as i have tried all sorts and all i get is incorrect device sku,
please help
am desprate

nunesfl said:
Dear anavas,
I tried to reboot and reinstall as edcom suggested in another forum. WM6 is working now better and I can reboot.
I could not do 'contrast' and 'error reporting' show, any idea ?
Click to expand...
Click to collapse
Hi,
even I don't see the contrast and error reporting menu, so I guess it might be work for some other hx2000 series and not for hx2795, or it may be some registry hack, I don't know

Touch Pro 2 and Tom Tom Navigator 7.916

Hi Everyone,
I just installed Tom Tom Navigator 7.916 on my T-Mobile TP2(WM6.5) and now Bluetooth no longer works.
Does anyone know what I can do to get Bluetooth working again? I tried reinstalling TT again but to no avail.
Thank you in advance for any useful information.
Giovanni

longsolong said:
Hi Everyone,
I just installed Tom Tom Navigator 7.916 on my T-Mobile TP2(WM6.5) and now Bluetooth no longer works.
Does anyone know what I can do to get Bluetooth working again? I tried reinstalling TT again but to no avail.
Thank you in advance for any useful information.
Giovanni
Click to expand...
Click to collapse
You're likely just using the wrong version. You've probably been around here for a while so you know how using the search feature can be your best friend.
Go here and download this version...
New Tomtom 916.9189 Specifically for TP2 Released
good luck

Aaron,
Thank you for your post!
I tried installing the version listed on the link you provided but I get the following message "Unable to start.Not enough memory is available." I have 1 GB available on my memory card.
I currently have a T-Mobile Touch Pro 2(WM6.5) and my current version of Tom Tom,which prevents bluetooth from working , is 7.916.9189.
Thank you in advance to anybody with any useful information.
Giovanni

Don't worry this is some what of an easy fix. Just search tom tom back on the general page and this should get you going. Sorry i can't post the appropriate links since the search function is down for me. But feel free to try it later.

There's an easy way to fix this:
1) install the TomTom that stops bluetooth from working
2) install any DECENT file explorer program that allows you to see the dates on files (total commander, etc etc, there's plenty out there)
3) look in your phones \Windows folder and you will see 2 Bluetooth files that have been replaced by the TomTom install, with wildly out-of date dates (something like 2006, when all the rest of the \Windows files should be dated 2008 or more recent)
4) DELETE them both
5) soft-reset phone ( losing no data)
As the phone reboots, it will spot the 2 missing Bluetooth files & replace them with the correct ones from the ROM, bingo, normal bluetooth service is restored and TomTom still works
I have used this trick on both my old Kaiser and both my TP2S, many times when reflashign ROMS and reinstalling a known good working version of TomTom that had the BT bug, it always works 100%
Joe

Heres a treat.
ttn7.916.9189__black.cab
or
TTN7.918.9193.cab
both have the files that cause the problem pre removed. Enjoy

Hi I renamed the 2 offending files and got rid of the BTTrayCE.exe error but I can't start tomtom it just says not enough memory. Any ideas? (Sorry to hijack this thread btw).