Hello,
I've just update my Mi 6 to MIUI Global 9.2.2.0 (NCAMIEK). Before it, when I connect phone to PC via USB and choose MTP at notification bar I can transfer files. After this update at notification bar nothing shows Cannot choose MTP because this options doesn't show. Before this update my OS (xubuntu) saw phone even it was in charge mode. Now, linux doesn't see phone at all.
How can I repair it? (debbuing mode is on ofc)
You can try going into Developer Options and look for the Select USB Configuration option.
Related
Have the international version. After the recent OTA upgrade to 4.1.1 Android (unlocked bootloader and rooted, stock ROM), I can't seem to put the One X into USB drive mode on a MacBook pro.
When I connect the X to the MBP, USB debugging mode gets enabled and in the notification bar I get an option to change USB setting but tapping it gets me to the tethering options. Also, in "Setting" section the old "Connect to PC" option is no longer present!
What happened? Am I missing something?
skn-xda said:
Have the international version. After the recent OTA upgrade to 4.1.1 Android (unlocked bootloader and rooted, stock ROM), I can't seem to put the One X into USB drive mode on a MacBook pro.
When I connect the X to the MBP, USB debugging mode gets enabled and in the notification bar I get an option to change USB setting but tapping it gets me to the tethering options. Also, in "Setting" section the old "Connect to PC" option is no longer present!
What happened? Am I missing something?
Click to expand...
Click to collapse
To answer my own question, it seem the disk mode has been replaced with Media Transfer Mode (MTM) http://forum.xda-developers.com/showpost.php?p=34601313&postcount=9
I used Helium to change to USB PTP mode and now mine tablet isnt recognized when connected to PC. Want to change it back to MTP mode, but I cant find anywhere in the settings to choose betweens USB modes and I just dont know how Helium broiught me there.
So where is this USB mode settings hiding in the settings?
edit:
Managed to change it back to MTP mode, be secret code *#0808# and there are few choice to choose from. I chosed just MTP, but there is also MTP + ADB and does it matter which to choose? Since the tablet is still not recognized when connected to PC as it used to do before?
Also, USB Mode is suppose in storage settings, but there is no ways to access it by just go into storage settings and only through Helium app. How do you enable this hidden settings in Storage?
Normal there should be "3 dots menu" to get there, but there isnt in mine tablet and do Samsung hve removed it or its a bug?
edit2:
Fixed it, by uninstall Helium and few other apps. After reboot and tablet is recognized when connect to pc and got USB mode choice by pulling notification down.
dt33 said:
I used Helium to change to USB PTP mode and now mine tablet isnt recognized when connected to PC. Want to change it back to MTP mode, but I cant find anywhere in the settings to choose betweens USB modes and I just dont know how Helium broiught me there.
So where is this USB mode settings hiding in the settings?
edit:
Managed to change it back to MTP mode, be secret code *#0808# and there are few choice to choose from. I chosed just MTP, but there is also MTP + ADB and does it matter which to choose? Since the tablet is still not recognized when connected to PC as it used to do before?
Also, USB Mode is suppose in storage settings, but there is no ways to access it by just go into storage settings and only through Helium app. How do you enable this hidden settings in Storage?
Normal there should be "3 dots menu" to get there, but there isnt in mine tablet and do Samsung hve removed it or its a bug?
edit2:
Fixed it, by uninstall Helium and few other apps. After reboot and tablet is recognized when connect to pc and got USB mode choice by pulling notification down.
Click to expand...
Click to collapse
How did u dial *#0808# on a tablet?... I am having a issue connecting my tab to a computer. I have no idea where mtp mode is on this thing
Hi, having no problem connect with my SGW to my PC via USB previously, until recently, no more USB mass storage/USB debug icon appear at notification bar. (but charging phone via USB still working and fine)
Using
-Windows 7
-Samsung galaxy W with Cyanogenmod 9 from acro68.
Try searching through google and try all method still cannot fix it.
1) clear dalvik cache - fail
2) re-enable 'Andoid debugging' in 'Developer options' - checked, but fail
3) Storage > USB computer connection > Mass storage - fail... change to other type, also fail
4) try using Easy Tether from Google Play - fail
5) Reboot PC, use other PC - fail
6) Reboot phone with and without USB connecting to PC - fail
7) Install samsung driver in PC - fail
Not remembering I had changed any setting in phone, but the USB icon just won't appear once the USB is connected.
Having greenify installed in phone, not thinking this or other app will cause this problem.
Really need some help please
ericjj said:
Hi, having no problem connect with my SGW to my PC via USB previously, until recently, no more USB mass storage/USB debug icon appear at notification bar. (but charging phone via USB still working and fine)
Using
-Windows 7
-Samsung galaxy W with Cyanogenmod 9 from acro68.
Try searching through google and try all method still cannot fix it.
1) clear dalvik cache - fail
2) re-enable 'Andoid debugging' in 'Developer options' - checked, but fail
3) Storage > USB computer connection > Mass storage - fail... change to other type, also fail
4) try using Easy Tether from Google Play - fail
5) Reboot PC, use other PC - fail
6) Reboot phone with and without USB connecting to PC - fail
7) Install samsung driver in PC - fail
Not remembering I had changed any setting in phone, but the USB icon just won't appear once the USB is connected.
Having greenify installed in phone, not thinking this or other app will cause this problem.
Really need some help please
Click to expand...
Click to collapse
Have you installed a custom rom?
LS.xD said:
Have you installed a custom rom?
Click to expand...
Click to collapse
Yup, as mentioned, i installed CM9 from acro68 years ago.
But previously do not have any problem, until recently...
Any idea to help
ericjj said:
Yup, as mentioned, i installed CM9 from acro68 years ago.
But previously do not have any problem, until recently...
Any idea to help
Click to expand...
Click to collapse
Time for eating KitKat
LS.xD said:
Time for eating KitKat
Click to expand...
Click to collapse
haha!! any stable kitkat rom for SGW? not sure the acro version is stable for daily use.
ericjj said:
haha!! any stable kitkat rom for SGW? not sure the acro version is stable for daily use.
Click to expand...
Click to collapse
For me Mokee OS runs without any issues
Sent from my beloved HTC One S using (most time buggy) Tapatalk
This solution is for those who will face the same problem
To fix same problem on my S4 mini I've tried:
Numerous PCs and USB cables
USB debugging (& Stay awake & Unknown sources) checked and unchecked
Unmounted & remounted SD card
Asking the PC to look for new hardware
Removed and re-installed PC drivers
Dial *#7284# or *#0808# and set MTP+ADB USB Setting
Nothing help me.
However, thanks to SparksGuy, I have the solution , as follows:
1. Remove phone from PC and remove battery to shut off phone.
2. Plug USB cable into PC.
3. Plug USB cable (other end) into phone.
4. The PC install new hardware appropriate drivers for a few minutes (phone without battery)
5. Unplug USB cable from phone
6. Put battery back in and turn on phone
7. As the phone boots, hold down Volume up and down. Phone boots into safe mode.
8. Plug USB cable into phone.
9. I saw notification about USB MTP-connecting on the phone. PC have found my phone!
10. After the reboot in normal mode problem was fixed
Hello everyone,
when I tried to connect my Galaxy S4 Mini (LTE i9195, Stock KitKat, rooted) via USB to my computer today, nothing happend. I checked the drivers, they are all installed. But I can connect another S4 Mini (LTE) without any problems.
I noticed that my S4 Mini does not show the notification you usually get when you connect the phone via USB (the one where you can choose Camera or MTP) anymore. The other one, which works perfect, shows this notification in the notification bar. I am using the original Samsung cable, which was shipped with the phone.
Note: My phone still charges when I connect it to the PC but does not recognise the PC connection
My phone is rooted and I used an Autostart/Reciever Toggle program yesterday - is it possible that I accidentally deactivated a necessary service?
What I tried so far:
- Google (only found solutions for "PC doesnt recognise phone" and not vice versa)
- Reboot
- DalvikCache Reset
- Cache Reset
- turn on/off USB Debugging
- use different cable
- use different usb ports
- use the code *#8080# to change MTP (it was already set to MTP...)
#Edit: It is just as in this thread (but S4 Mini instead of S4):
http://forum.xda-developers.com/showthread.php?t=2627860
I don't wanna hard reset my phone... Does anyone have an idea?
Thank you
When connected tot PC go tot: settings - storage Then press the 3 dots (right on top)
And choose USB connections. See of the desired option is selected
_nicolas_ said:
When connected tot PC go tot: settings - applications. Then press the 3 dots (right on top)
And choose USB connections. See of the desired option is selected
Click to expand...
Click to collapse
Thanks for your answer, but I can't find what you mean I have seen a post where it says that I need to go to Settings -> Storage and hit the three dots there, but on my Samsung there are no 3 dots AND nothing happens when I press the menu button either... See: random-host.com/blogs/enable-media-device-mtp-usb-mode-android-44-kitkat-and-50-lollipop
Thanks!
(Okay I got it working now.)
After I tried everything I could imagine, I decided to Flash the Stock Rom again. But before I was going to flash the new ROM I did a nandroid backup with CWM of my current ROM + everything. After Full Wiping I decided to restore the backup I just did (the ROM is still downloading hehe...) and voila it works again! Why? I have no clue...
So just backup -> full wipe -> restore backup -> worked!
#Edit: Stopped working agin... But the computer successfully connected to the phone, installed the drivers and displayed the phone in the explorer. Note: this time (when it actually worked after the restore) it showed the MTP connection in the statusbar! But now it disappeard again and is not showing up anymore...
Have u enable developer option ?? Some phones needs to enable developer optiom to recognise the phone in pc.. to enable this go to setting /about phone n click in build number more than 7 times . And then go to developer optiongn then click in USB Debugging . Then ur pc will recognise the phone.. hope this help u !!
Thanks for your reply!
As stated in my thread I already enabled/disabled and reenabled USB Debugging, and USB Debugging requires Developer Options.
But thanks for trying to help!!
Is it possible that my USB port is broken? A new one only costs 5€ so I think I'll give it a try...
Hi ! Ive the same problem... Ive you try to change your Kernel ?
I'm currently running on CM 12 and it works. However, if the pc does not recognise the phone, try rebooting your computer and your phone (that often actually works).
Mh... Try to reboot in recovery and make a wipe data / factory reset.
Any new ideas how to resolve this issue?
Did all of the above plus factory reset, tried different drivers and changed phone's charging port.
Two other phones (a Samsung and a Sony) connect to this PC just fine.
Thanks in advance
LE: In download mode the PC sees it in Odin. I tried SilviuMik's different kernel variants (the phone is stock KitKat), but nothing happens. I had no problems with it connecting to PC until about 2-3 weeks ago.
Updated to the latest March Security and now the USB Options are missing from the notification drop down. When I go into Developer Options and check USB Options, transfer files is missing. Only ones available are Charging>MTP>PTP>RNDIS(USB Ethernet)>Audio Source>MIDI.
ADB Devices no longer recognizes the device., though the phone is charging when connected by USB.
Had no problems with it before the update.
Well guess it was my laptop, rebooted and everything is ok. D'OH!