Have the international version. After the recent OTA upgrade to 4.1.1 Android (unlocked bootloader and rooted, stock ROM), I can't seem to put the One X into USB drive mode on a MacBook pro.
When I connect the X to the MBP, USB debugging mode gets enabled and in the notification bar I get an option to change USB setting but tapping it gets me to the tethering options. Also, in "Setting" section the old "Connect to PC" option is no longer present!
What happened? Am I missing something?
skn-xda said:
Have the international version. After the recent OTA upgrade to 4.1.1 Android (unlocked bootloader and rooted, stock ROM), I can't seem to put the One X into USB drive mode on a MacBook pro.
When I connect the X to the MBP, USB debugging mode gets enabled and in the notification bar I get an option to change USB setting but tapping it gets me to the tethering options. Also, in "Setting" section the old "Connect to PC" option is no longer present!
What happened? Am I missing something?
Click to expand...
Click to collapse
To answer my own question, it seem the disk mode has been replaced with Media Transfer Mode (MTM) http://forum.xda-developers.com/showpost.php?p=34601313&postcount=9
Related
i feel like i'm missing something obvious here, but i don't see pc software or charge only in usb connect menu anymore, also the menu doesn't come up when i plug in usb, i just get a prompt if i want to mound sd card or not, it used to have a menu with 5 options now it has 3 and i have to go into settings > storage > menu button > usb connection mode just to see the menu.
thanks in advance for any help on this.
KronicSkillz said:
i feel like i'm missing something obvious here, but i don't see pc software or charge only in usb connect menu anymore, also the menu doesn't come up when i plug in usb, i just get a prompt if i want to mound sd card or not, it used to have a menu with 5 options now it has 3 and i have to go into settings > storage > menu button > usb connection mode just to see the menu.
thanks in advance for any help on this.
Click to expand...
Click to collapse
K so i've been reading more on this and i see that google took charge only mode out of android.... is this correct? if so did they also take pc software mode out to prevent connection from pc running terminal?
is there any other way to use adb shell from terminal on my pc using usb connection than pc software mode?
KronicSkillz said:
is there any other way to use adb shell from terminal on my pc using usb connection than pc software mode?
Click to expand...
Click to collapse
I have no problem using adb with whatever default setting the usb connection is set to in CM10. Just make sure you have Developer Options turned on and Android debugging enabled.
k good to know thanks
verified that on this rom V6, all usb modes are showing up and the menu is popup when i plug in usb, ahhhh, back to normal
http://forum.xda-developers.com/showthread.php?t=1980541
best Rom for p930 right now IMO.
KronicSkillz said:
verified that on this rom V6, all usb modes are showing up and the menu is popup when i plug in usb, ahhhh, back to normal
http://forum.xda-developers.com/showthread.php?t=1980541
best Rom for p930 right now IMO.
Click to expand...
Click to collapse
Sorry to bring back this thread but I wasn't sure if you figured it out or not?
Anyways, try this:
In CM10.1, I select Mass Storage. Afterward, a screen pops up saying "Press to toggle Mass Storage". When it's not toggled on, that is PC Mode. When toggled on, it's Mass Storage
i figured out that its cyanogenmod that has missing modes when i changed back to a stock based ics they all came back. i have 6 or 7 modes in stock ics and i only had 3 in cm10
KronicSkillz said:
i figured out that its cyanogenmod that has missing modes when i changed back to a stock based ics they all came back. i have 6 or 7 modes in stock ics and i only had 3 in cm10
Click to expand...
Click to collapse
Yeah that's what I'm saying. I don't think they actually are missing. I believe they've combined the settings so it's easier to switch between pc and mass storage (one button toggle between the two).
yes i know they are combined i dont like it.
KronicSkillz said:
yes i know they are combined i dont like it.
Click to expand...
Click to collapse
Oh sorry, I misunderstood you.
After the lastest OTA update (Android 4.1.1, 3.14.707.24) my HTC One X can only connect to my PC in Portable Media Player mode.
Used to be it would prompt you to choose if you would like the phone to connect in "Charge Only" or "Mass Storage Mode".
Now I've noticed they've removed the "Connect To PC" option under system options and the default mode is simply Portable Media Player mode.
Is there a way to revert back to "Mass Storage Mode" ?
Thanks.
AW: [Q] How to connect to PC in mass storage mode ?
XDAMENS said:
After the lastest OTA update (Android 4.1.1, 3.14.707.24) my HTC One X can only connect to my PC in Portable Media Player mode.
Used to be it would prompt you to choose if you would like the phone to connect in "Charge Only" or "Mass Storage Mode".
Now I've noticed they've removed the "Connect To PC" option under system options and the default mode is simply Portable Media Player mode.
Is there a way to revert back to "Mass Storage Mode" ?
Thanks.
Click to expand...
Click to collapse
Yes flash the kernel in my signature and lyapota mod now you get back the older ums back..next time search a bit
Sent from my HTC One X using xda premium
Alex-V said:
Yes flash the kernel in my signature and lyapota mod now you get back the older ums back..next time search a bit
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Hey umm... I know it sound stupid but I've recently lost all my pictures, video and music on my HTC One X and now I'm trying to connect it in a USB mode, but apparently HTC has removed this option and I can't even try to restore some of my data. Can you please help me? I can't understan what you mean by saying all of this (flash the kernel...) :fingers-crossed:
Hi all, how are you?
I have a Galaxy Nexus unrooted stock with Android 4.3 (JWR66V).
After the update to 4.3, my device has stopped working in MTP/PTP mode.
I mean, When I connect my phone to my Notebook USB port, thus nothing happens on my notebook or my phone.
When my phone is connected to my notebook the notification dialog to select between MTP/PTP modes doesn`t show up anymore in the phone (it only says that is charging).
I have tried to re-install the drivers on my notebook, and It didn't fix this issue.
I have also tried to the a factory reset on my phone, and It did't fix the issue either.
Besides, I tried also to connect the phone with a different USB cable and it didn't fix the issue either.
Please, May someone help me?
Thanks in advance
Please, May someone help me?
I have no idea of what is going on and why USB stopped working after 4.3 update?
How do I troubleshoot this issue?any clues?
I figure out that on Android 4.3 I have ti go to Settings->Storage->Usb Computer Connection and manually select the connection mode...
(I am not sure Why the notification pop up doesn't show anymore on the phone when I connect it to the PC using the USB cable)
RogerSilva said:
I figure out that on Android 4.3 I have ti go to Settings->Storage->Usb Computer Connection and manually select the connection mode...
(I am not sure Why the notification pop up doesn't show anymore on the phone when I connect it to the PC using the USB cable)
Click to expand...
Click to collapse
You are totally right... dont know the stu... option doesnt appears clear. On my S3 I did the same, but the option wasnt visible... you must click over USB (even it appearing as dimmed) then a USB CONNECTION (or something like) appears you must click over and then a screen with MPT option will be available... For godsake WHY such thing isnt available on settings or on shortcut menu by default is beyond my understanding.
I used Helium to change to USB PTP mode and now mine tablet isnt recognized when connected to PC. Want to change it back to MTP mode, but I cant find anywhere in the settings to choose betweens USB modes and I just dont know how Helium broiught me there.
So where is this USB mode settings hiding in the settings?
edit:
Managed to change it back to MTP mode, be secret code *#0808# and there are few choice to choose from. I chosed just MTP, but there is also MTP + ADB and does it matter which to choose? Since the tablet is still not recognized when connected to PC as it used to do before?
Also, USB Mode is suppose in storage settings, but there is no ways to access it by just go into storage settings and only through Helium app. How do you enable this hidden settings in Storage?
Normal there should be "3 dots menu" to get there, but there isnt in mine tablet and do Samsung hve removed it or its a bug?
edit2:
Fixed it, by uninstall Helium and few other apps. After reboot and tablet is recognized when connect to pc and got USB mode choice by pulling notification down.
dt33 said:
I used Helium to change to USB PTP mode and now mine tablet isnt recognized when connected to PC. Want to change it back to MTP mode, but I cant find anywhere in the settings to choose betweens USB modes and I just dont know how Helium broiught me there.
So where is this USB mode settings hiding in the settings?
edit:
Managed to change it back to MTP mode, be secret code *#0808# and there are few choice to choose from. I chosed just MTP, but there is also MTP + ADB and does it matter which to choose? Since the tablet is still not recognized when connected to PC as it used to do before?
Also, USB Mode is suppose in storage settings, but there is no ways to access it by just go into storage settings and only through Helium app. How do you enable this hidden settings in Storage?
Normal there should be "3 dots menu" to get there, but there isnt in mine tablet and do Samsung hve removed it or its a bug?
edit2:
Fixed it, by uninstall Helium and few other apps. After reboot and tablet is recognized when connect to pc and got USB mode choice by pulling notification down.
Click to expand...
Click to collapse
How did u dial *#0808# on a tablet?... I am having a issue connecting my tab to a computer. I have no idea where mtp mode is on this thing
Pixel 2 XL updated to.Android 11 recently here in UK.
Now I cannot connect to DJI Mavic Pro or my PC
No USB pop up on status bar saying USB Connected
Yes Dev options enabled and using proper cables (have 2)
My Question is it possible to Downgrade fully to
Android 9 or 10
If so what do i need, links?
Thanks
In the networking section of Dev options is "Default USB Configuration." When I set that to "File Transfer/Android Auto" I was able to connect to my PC. I sometimes have to disable then re-enable ADB to get it to connect. I haven't got a Mavic to test, but hopefully that will help some, at least with the computer.
Yeah tried that with no success
Was working fine with 9 and 10 version
Tried hard reset and safe mode still same
What you mean disable/enable ADB
So looking for how to downgrade if possible
EwOkie said:
Pixel 2 XL updated to.Android 11 recently here in UK.
Now I cannot connect to DJI Mavic Pro or my PC
No USB pop up on status bar saying USB Connected
Yes Dev options enabled and using proper cables (have 2)
My Question is it possible to Downgrade fully to
Android 9 or 10
If so what do i need, links?
Thanks
Click to expand...
Click to collapse
I'm pretty sure the only way to downgrade is to wipe your device though, so make sure you have a backup first. You can downgrade by flashing the Google Factory Images.
There's also an online flashing tool from Google here: https://flash.android.com/
When my device is cranky, sometimes I can revoke USB debugging authorisations, then turn USB debugging (ADB) off and back on. This seems to reset the PC connection and let's it communicate properly, even if I'm only looking to transfer files.
Otherwise, you'll want to flash the factory image as MrBrady suggested.