Develop Bugs

Hard bricked mi A2 lite need help to enter EDL mode

I unlocked eh bootloader , installed twrp then after flashing magisk ,I got a bootloop.
Afterwards i tried to flash the stock rom ,but I got the mismatching device and rom error, so decided to install a custom rom .
After I installed pixel experience P and THE SYSTEM IS DESTROYED.
So I went back to the stock rom and edited the Flash_all.bat file removing everything but the flash commands.
now I have bricked phone and I can't enter EDL mode . when I plugg it in Usb I get HS-USB Diagnostics 900E.
Any suggestion is welcome

Can you enter fastboot unlock the bootloader and then reboot to edl via fastboot?

TJ1999 said:
Can you enter fastboot unlock the bootloader and then reboot to edl via fastboot?
Click to expand...
Click to collapse
thanks for your reply.
I succeded in entering the edl mode by opening the phone and shorting the JTAG pins.
After that I used mi flash tool with the srock rom and it worked

O did same mistake as you.
Can you teach me How to revive Mine?

anykill said:
O did same mistake as you.
Can you teach me How to revive Mine?
Click to expand...
Click to collapse
Just go to fastboot mode and type: "fastboot oem edl"
If you can´t enter fastboot, you have to open your phone and connect the testpoints, then connect cable to pc and releas the test-points
https://www.youtube.com/watch?v=mhsRv42rsqI - here for the redmi 6 pro (same hw as mi a2 lite) - in min 2, the test points are shown!

bil23 said:
I unlocked eh bootloader , installed twrp then after flashing magisk ,I got a bootloop.
Afterwards i tried to flash the stock rom ,but I got the mismatching device and rom error, so decided to install a custom rom .
After I installed pixel experience P and THE SYSTEM IS DESTROYED.
So I went back to the stock rom and edited the Flash_all.bat file removing everything but the flash commands.
now I have bricked phone and I can't enter EDL mode . when I plugg it in Usb I get HS-USB Diagnostics 900E.
Any suggestion is welcome
Click to expand...
Click to collapse
Hey look at this: https://www.youtube.com/watch?v=YctyUhBgp34
it is very simple. I know you solve the problem but this video is better.

anykill said:
O did same mistake as you.
Can you teach me How to revive Mine?
Click to expand...
Click to collapse
1- install mi flash tool and Qualcomm driver on your Pc
2- open the phone (just remove the battery connector )
3-plug a USB cable in the device
4- short the jtag pins(you can find their location in this page www mobilerdx com/2018/09/xiaomi-redmi-6-pro-test-point-boot-into-edl-9008-mode.html
7-plug the USB cable in the Pc while shortening the pins
If you do these steps mi flash tool should reconize your device and you will be able to flash it

Can't unlock: Request parameter error

Hi,
I'm trying to unlock my redmi note 5 with the latest version of miunlock but I keep getting this error message at 99%: "Request parameter error"
My account is correctly linked to the phone, I have no clue what to do...
Thank you!

take a pixel

same problem

Mi note 5 ai boot loader unlock
Same here ,every time i try the same error appear!

Redmi Note 5 Pro
same problem for me
still no solutions for these ?

Mi Unlock (windows) for Mi A3 Error: Couldn't unlock. Request parameter error
Hello, even I am facing the Same issue please asssist.
Thank you.

Same here: Redmi Note 5 Pro and the last global stable Miui 11 Rom.
I have enabled in dev options oem unlock, USB-Debugging and bind my phone to Mi Account (unlock status).
I saw the popup, that the phone is bind to my account.
Mi Cloud find my Phone.
The Phone is connected with USB 2.0 Port.
I have try the newest and older versions of the Mi unlock tool as admin.
Every time the same at 99%: Couldn't unlock => Request parameter error
In the Device Manager (Win10) I find Android Phone and ABD Bootloader Interface.
I think it looks good.
I have attached the mi unlock tool log file.
Where is the solution and sorry for my bad english.
It is not my native language.
Thank you for comments :good:

I had the same problem when I used my second phone as usb tethering network connection, but I fixed by using it as wifi hotspot. The adb thingie was not "locked" or if you have other devices connected via usb, it get the error, I believe.

Try downgrading mitools and miui

Today I could unlock the device by the first try, with my brothers pc (old amd apu/win7).
Thanks and have a Happy New Year!

If someone is still wondering, just connect your phone in fastboot and open Minimal ADB and Fastboot. type this "fastboot flashing unlock" and hit enter. This did the job for me.

httpdoge said:
If someone is still wondering, just connect your phone in fastboot and open Minimal ADB and Fastboot. type this "fastboot flashing unlock" and hit enter. This did the job for me.
Click to expand...
Click to collapse
Superb!
just had to modify as requested
fastboot flashing unlock
...
FAILED (remote: Need wipe userdata. Do 'fastboot oem unlock-go')
finished. total time: 0.045s
fastboot oem unlock-go
...
OKAY [ 0.034s]
finished. total time: 0.393s

how can i use this code

It Worked
httpdoge said:
If someone is still wondering, just connect your phone in fastboot and open Minimal ADB and Fastboot. type this "fastboot flashing unlock" and hit enter. This did the job for me.
Click to expand...
Click to collapse
Thanks Dude, It worked for me...

ramisamii said:
how can i use this code
Click to expand...
Click to collapse
very late reply but you should google how to open fastboot in your phone, then connect it to your pc and download platform tools, open cmd cd into the directory w that exe connect your phone and type the commands above

I solved this issue by simply rebooting my Poco F3 and then booting back into fastboot and clicking unlock

httpdoge said:
If someone is still wondering, just connect your phone in fastboot and open Minimal ADB and Fastboot. type this "fastboot flashing unlock" and hit enter. This did the job for me.
Click to expand...
Click to collapse
brother nothing is happening for me, i am still getting request parameter error, please help me

Robert314 said:
I solved this issue by simply rebooting my Poco F3 and then booting back into fastboot and clicking unlock
Click to expand...
Click to collapse
brother nothing is happening for me, i am still getting request parameter error, please help me

i solve it with changing usb port on pc. now have to wait 7 days

This solves the problem
Check out this video for more informations:
And yes, you have to wait for 7 days for some reason.... Thanks Xiaomi

[SOLVED] Mi flash error (Length cannot be less than zero)

Hi everyone;
I'm on MIUI11 hybridOS now, and want to get back to the stock rom.
My bootloader is unlocked (by "fastboot oem unlock" command), the drivers are installed on my PC, I'm using mi flash tool 20191206 (i think it's the latest version), i copied mi flash on drive C, and there is no space in the directory of the rom, and i run mi flash as administrator;
but when i connect my phone (in the bootloader mode) to the computer, mi flash doesn't detect it and shows the error "Length cannot be less than zero. Parameter name: length"
Even i tried EDL mode, when in fastboot mode typed "fastboot oem edl", but after that the phone turns off and led light blinks and nothing happens and PC doesn't detect the phone, then i have to restart it by holding the power button.
Could anyone help me?
Thank you

pourya_fa said:
Hi everyone;
I'm on MIUI11 hybridOS now, and want to get back to the stock rom.
My bootloader is unlocked (by "fastboot oem unlock" command), the drivers are installed on my PC, I'm using mi flash tool 20191206 (i think it's the latest version), i copied mi flash on drive C, and there is no space in the directory of the rom, and i run mi flash as administrator;
but when i connect my phone (in the bootloader mode) to the computer, mi flash doesn't detect it and shows the error "Length cannot be less than zero. Parameter name: length"
Even i tried EDL mode, when in fastboot mode typed "fastboot oem edl", but after that the phone turns off and led light blinks and nothing happens and PC doesn't detect the phone, then i have to restart it by holding the power button.
Could anyone help me?
Thank you
Click to expand...
Click to collapse
Pleaaaase! Anybody can help me??

You need to be in fastboot mode for miflash. Xiaomi geek has instructions.

bonzoe said:
You need to be in fastboot mode for miflash. Xiaomi geek has instructions.
Click to expand...
Click to collapse
I am in fastboot mode, however it doesn't detect my phone

The alternative way! (My solution )
Finally I found a way to flash my phone without Mi flash tool!
It's so simple,
You boot into fastboot mode and connect the phone to your PC, in the ROM folder (after extracting) there are some files in .bat format (flash_all.bat , flash_all_lock.bat , etc), you just need to double click the appropriate file to run and flash your phone! No need to Mi flash tool!

The Mi flash tool provides the drivers and then basically does what you have done (as I read Xaiomi geek)

bonzoe said:
The Mi flash tool provides the drivers and then basically does what you have done (as I read Xaiomi geek)
Click to expand...
Click to collapse
Yea you're right, but despite i installed the drivers it gave me the error, so i installed the rom manually!

For fastboot oem edl , you need to have installed Qualcomm drivers, and if u are in miui is more safe edl mode, that is why mi flash don't flash the rom.

Os_Herdz said:
For fastboot oem edl , you need to have installed Qualcomm drivers, and if u are in miui is more safe edl mode, that is why mi flash don't flash the rom.
Click to expand...
Click to collapse
Thank you so much
I'll try it next time

pourya_fa said:
The alternative way! (My solution )
Finally I found a way to flash my phone without Mi flash tool!
It's so simple,
You boot into fastboot mode and connect the phone to your PC, in the ROM folder (after extracting) there are some files in .bat format (flash_all.bat , flash_all_lock.bat , etc), you just need to double click the appropriate file to run and flash your phone! No need to Mi flash toSounds
Click to expand...
Click to collapse
pourya_fa said:
Hi everyone;
I'm on MIUI11 hybridOS now, and want to get back to the stock rom.
My bootloader is unlocked (by "fastboot oem unlock" command), the drivers are installed on my PC, I'm using mi flash tool 20191206 (i think it's the latest version), i copied mi flash on drive C, and there is no space in the directory of the rom, and i run mi flash as administrator;
but when i connect my phone (in the bootloader mode) to the computer, mi flash doesn't detect it and shows the error "Length cannot be less than zero. Parameter name: length"
Even i tried EDL mode, when in fastboot mode typed "fastboot oem edl", but after that the phone turns off and led light blinks and nothing happens and PC doesn't detect the phone, then i have to restart it by holding the power button.
Could anyone help me?
Thank you
Click to expand...
Click to collapse
The same problem!!!

Os_Herdz said:
For fastboot oem edl , you need to have installed Qualcomm drivers, and if u are in miui is more safe edl mode, that is why mi flash don't flash the rom.
Click to expand...
Click to collapse
But how to solve it? I think I have installed drivers both by pressing Drivers button in Mi Flash and separately.

pourya_fa said:
The alternative way! (My solution )
Finally I found a way to flash my phone without Mi flash tool!
It's so simple,
You boot into fastboot mode and connect the phone to your PC, in the ROM folder (after extracting) there are some files in .bat format (flash_all.bat , flash_all_lock.bat , etc), you just need to double click the appropriate file to run and flash your phone! No need to Mi flash tool!
Click to expand...
Click to collapse
I want to try this and manually have found both the .bat files for Windows and .sh files of the same name for Android, but I need to know, from which location of them did you flash the phone: I have downloaded stock ROMs both on my phone SD card and on my PC, both in zip and unzipped. Even with developer mode unlocked, the update function from Settings sees only zipped versions on SD, but only tries to get file info and stops. Tapping on either bat or sh files in the phone's File Explorer opens them for reading as text files instead of executing either. In fastboot mode, the phone attached over usb to my laptop is reflected in Device Manager of Windows as Android Adb Device, if I remember correctly, but no files on it are visible in computer's File Explorer or Total Commander or MiFlash or MiPCsuite, the latter in usual work mode of the smartphone shows its internal memory folders all right, but not the SD as such in its File Explorer, though it opens the phone's media, set to be stored on the SD. The original problem is that despite storage of media and downloads on the external SD card and use of CleanMaster frequently, even after deinstallation of all external apps my Redmi says it has only up to 23 mb of disk space. I was recommended resetting to factory settings, but this function says if fails to switch off device search even after I log out of my Mi account and switch off Google device search as an administrator in Privacy settings. I then tried Recovery button in MiPCsuite,, but it did not work, requiring to back up the device on the PC , but saying backup is impossible when I press its Backup button, and Update\Flash buttons on the suite don't give any results either, as update says there are no updates, which is false. Redmi 3, if it is necessary to know, xiaomi.eu , never changed. So my question is, where from did you flash your phone? Where were the ROM\bat files? On th phone or computer?

pourya_fa said:
The alternative way! (My solution )
Finally I found a way to flash my phone without Mi flash tool!
It's so simple,
You boot into fastboot mode and connect the phone to your PC, in the ROM folder (after extracting) there are some files in .bat format (flash_all.bat , flash_all_lock.bat , etc), you just need to double click the appropriate file to run and flash your phone! No need to Mi flash tool!
Click to expand...
Click to collapse
Please, please, I want a video, because of the shoes, the same problem mentioned above and it has not been solved so far

"This MIUI version can't be installed on this device"

Bricked with a locked bootloader - "This MIUI version can't be installed on this device"
I can get to "adb sideload" and fastboot, but the bootloader is locked
Can I unlock the bootloader with EDL? Can I access EDL with an EDL-cable? Or do I need to open the phone and short the EDL pins?
Can I recover the phone from a Linux computer? Or do I need Windoze?
Is it even possible to un-screw this phone?
Any help appreciated.

go vegan said:
Bricked with a locked bootloader - "This MIUI version can't be installed on this device"
I can get to "adb sideload" and fastboot, but the bootloader is locked
Can I unlock the bootloader with EDL? Can I access EDL with an EDL-cable? Or do I need to open the phone and short the EDL pins?
Can I recover the phone from a Linux computer? Or do I need Windoze?
Is it even possible to un-screw this phone?
Any help appreciated.
Click to expand...
Click to collapse
how did you do this?

Redmi 4A abdal said:
how did you do this?
Click to expand...
Click to collapse
1- Checking if this problem is still a problem with custom ROMs; it is, and thus I believe it to be a hardware fault.
2- Done testing, re-install stock stock ROM, lock bootloader via adb; bricked phone.

go vegan said:
1- Checking if this problem is still a problem with custom ROMs; it is, and thus I believe it to be a hardware fault.
2- Done testing, re-install stock stock ROM, lock bootloader via adb; bricked phone.
Click to expand...
Click to collapse
ok, you can run edl mode but its no good for you, its already locked by xiaomi, ( go ing to fastboot mode and give commands something like this " fastboot boot edl")
* do you see padlock lock sign when you go to fastboot mode
* try to flash vbmeta in fastboot mode
* try again to flash correct version miui fastboot rom with mi flashing tool with out selecting lock bootloader

I can get to fastboot by holding power+vol-down. There's no lock icon.
On Ubuntu, I don't think fastboot is compiled to support rebooting into edl. I tried editing the source, and I'm not sure if I did it right, but the binary I built did not boot the phone into edl.
Using these commands:
Code:
fastboot flash vbmeta /tmp/platform-tools/vbmeta.img
Code:
fastboot --disable-verity flash vbmeta /tmp/platform-tools/vbmeta.img
Code:
fastboot --disable-verity --disable-verification flash vbmeta /tmp/platform-tools/vbmeta.img
They all give the same result:
Code:
target reported max download size of 804274176 bytes
sending 'vbmeta' (4 KB)...
OKAY [ 0.006s]
writing 'vbmeta'...
FAILED (remote: Flashing is not allowed in Lock State)
finished. total time: 0.007s

go vegan said:
I can get to fastboot by holding power+vol-down. There's no lock icon.
On Ubuntu, I don't think fastboot is compiled to support rebooting into edl. I tried editing the source, and I'm not sure if I did it right, but the binary I built did not boot the phone into edl.
Using these commands:
Code:
fastboot flash vbmeta /tmp/platform-tools/vbmeta.img
Code:
fastboot --disable-verity flash vbmeta /tmp/platform-tools/vbmeta.img
Code:
fastboot --disable-verity --disable-verification flash vbmeta /tmp/platform-tools/vbmeta.img
They all give the same result:
Code:
target reported max download size of 804274176 bytes
sending 'vbmeta' (4 KB)...
OKAY [ 0.006s]
writing 'vbmeta'...
FAILED (remote: Flashing is not allowed in Lock State)
finished. total time: 0.007s
Click to expand...
Click to collapse
Try to unlock bootloader using cmd and then vbmeta

T.Y.M.SAI said:
Try to unlock bootloader using cmd and then vbmeta
Click to expand...
Click to collapse
I'm not sure what that means.

go vegan said:
I'm not sure what that means.
Click to expand...
Click to collapse
There are 2 ways to unlock bootloader
1. Official way using Mi flash tool
2. Unofficial way using cmd
There are lots of videos on how to unlock bootloader using cmd go and try them
Most important is to keep your phone charged

T.Y.M.SAI said:
1. Official way using Mi flash tool
2. Unofficial way using cmd
Click to expand...
Click to collapse
1- That requires access to a working phone.
2- All I'm finding is instructions for how to type "fastboot oem unlock" on a Windoze computer.

go vegan said:
1- That requires access to a working phone.
2- All I'm finding is instructions for how to type "fastboot oem unlock" on a Windoze computer.
Click to expand...
Click to collapse
Did you found a way to fix the phone or unlock bootloader?

You have 2 ways to get out of this situation.
1. Try to unlock the bootloader with the Mi account you used last time.
2. If couldn't unlock, then switch to EDL mode. Use a no auth programmer to flash the correct variant fastboot ROM and the device should boots up. Then add account again and wait for 168 hours for unlocking.
Since we've got no auth programmer for Sm6125 we could use EDL mode freely.

Hi there @go vegan , have you already fix your phone again? because i also got the same situation on my redmi 6. or is there anybody who can help? thanks

Hi all add me to the list with a k20pro.
The device was unlocked at the start, i got MIUI 12.5 global and flashed with miflashtool.
but wipe and lock was active.
now the phone comes up to the recovery menu and says the miui version is not for this device.
When I try to flash to another version, miflashtool says the device is locked,
when I try to unlock while using the account the device is registered in, miunlock says go to settings >developer options> mi unlock status.
Gave it to a repair shop for 1.5 months and nothing. I live in Iran so no authorized service centers here.
I have access to fast boot mode and recovery.
I tried xiaomitoll V2 which had a specific question asking if my device would show This MIUI version can't be installed on this device in phone is bricked option. It goes to get china official Rom but then errors.
I'm a noob here so any help would be great, tnx.

I have encountered the same problem a few hours ago with my beloved Redmi K20 Pro. My heart became gloomy thinking that I have no way left other than having to take to an authorized service centre where they will rip off the back cover. But then I stumbled upon this simple solution that took me a minute or two. This is how I solved it:
Entered the fastboot mode
Connected the phone to my laptop using the USB cable
Opened the official Mi Unlock Tool and logged in with my Mi account, and
Clicked on the beautiful UNLOCK button!
Boom! The phone is back to its vibrant life! I'm just happy again!

when I try to unlock while using the account the device is registered in, miunlock says go to settings >developer options> mi unlock status.

TECHtacian said:
I have encountered the same problem a few hours ago with my beloved Redmi K20 Pro. My heart became gloomy thinking that I have no way left other than having to take to an authorized service centre where they will rip off the back cover. But then I stumbled upon this simple solution that took me a minute or two. This is how I solved it:
Entered the fastboot mode
Connected the phone to my laptop using the USB cable
Opened the official Mi Unlock Tool and logged in with my Mi account, and
Clicked on the beautiful UNLOCK button!
Boom! The phone is back to its vibrant life! I'm just happy again!
Click to expand...
Click to collapse
Hi! Where can I download Mi Unlock Tool?

UnDevelopedDeveloper21 said:
Hi! Where can I download Mi Unlock Tool?
Click to expand...
Click to collapse
Apply for permissions to unlock Mi devices
en.miui.com

The solution to the problem is simple.
into fast boot mode,
Run unlock again!! Obviously it's locked. When unlocking is executed,
the same screen may appear again. Please do a reboot. You will definitely see the MIUI installation screen.

Device: Redmi note 7S
I found a solution and it worked for me:
1.Download the bat file and execute in your windows pc : https://drive.google.com/file/d/1NqPotx06yRuhPsOdEAdS4JNsk7qWWchF/view
2. After that use the MI unlocker tool to unlock the device.
3, Use mi flasher to flash the Rom.
After the hours of research in the internet i found the solution.
Thanks

Shiva5558 said:
Device: Redmi note 7S
I found a solution and it worked for me:
1.Download the bat file and execute in your windows pc : https://drive.google.com/file/d/1NqPotx06yRuhPsOdEAdS4JNsk7qWWchF/view
2. After that use the MI unlocker tool to unlock the device.
3, Use mi flasher to flash the Rom.
After the hours of research in the internet i found the solution.
Thanks
Click to expand...
Click to collapse
What do you mean by "execute in your windows pc"? Sorry for asking

This way I unbrick MI A3 - NO QFIL

Hey friends,
i bricked my devices and wasnt able to unbrick with QFIL.
But this way it works for me:
Download this repair rom: https://www.youtube.com/redirect?ev...ive/folders/1mcnv_OHcvuUkcyKjXNvLt54HU-2rNGiJ
Download MiFlash2020-3-14-0
FLASH IN EDL MODE
Thats all. Enjoy

Thanks for sharing

euphore said:
Hey friends,
i bricked my devices and wasnt able to unbrick with QFIL.
But this way it works for me:
Download this repair rom: https://www.youtube.com/redirect?event=video_description&redir_token=QUFFLUhqbWtoeUgwQ3E3a3FwQUxFYzE3eUxPZG9LUEQzZ3xBQ3Jtc0tsNEVfamJQQ0NvWGFsbU9HdGR1aVBsbHJVZUtobmY2dk5VQ1M4UUVSdF9HMEVyTzFwM3NoNG9lQWxGV28tYjVkdzdIT0NNakJRczY3RVJZWUd2LUhCMzVrQjh0OGtud2RqblQ1V0lKLUZWRmRhZVhtMA&q=https://drive.google.com/drive/folders/1mcnv_OHcvuUkcyKjXNvLt54HU-2rNGiJ
Download MiFlash2020-3-14-0
FLASH IN EDL MODE
Thats all. Enjoy
Click to expand...
Click to collapse
Nice sharing! Could be helpfull for many users

Thanks for sharing, it worked perfectly for me.

I think is not necessary open the phone... Using miflash with normal usb c cable is more simply and safe. The procedure is: install miflash, install xiaomi ad QUALCOMM driver. Connect phone in edl mode via usb. Now a new vom port will be installed. Refresh button in miflash. Flash the edl rom. Thats all. Open the smartphone not rewuired

euphore said:
Hey friends,
i bricked my devices and wasnt able to unbrick with QFIL.
But this way it works for me:
Download this repair rom: https://www.youtube.com/redirect?event=video_description&redir_token=QUFFLUhqbWtoeUgwQ3E3a3FwQUxFYzE3eUxPZG9LUEQzZ3xBQ3Jtc0tsNEVfamJQQ0NvWGFsbU9HdGR1aVBsbHJVZUtobmY2dk5VQ1M4UUVSdF9HMEVyTzFwM3NoNG9lQWxGV28tYjVkdzdIT0NNakJRczY3RVJZWUd2LUhCMzVrQjh0OGtud2RqblQ1V0lKLUZWRmRhZVhtMA&q=https://drive.google.com/drive/folders/1mcnv_OHcvuUkcyKjXNvLt54HU-2rNGiJ
Download MiFlash2020-3-14-0
FLASH IN EDL MODE
Thats all. Enjoy
Click to expand...
Click to collapse
Thanks, man. It worked perfectly for my.

Guys,
I just find out that the procedure in the video is not necessary. You don't need to open your phone. The command "fastboot oem edl" (in fastboot mode) or "adb reboot edl" (in adb mode) put your device in edl mode.
So, you just need use one of this commands, and then flash the file service rom.rar from video (or any other ROM you wanted).

leonardo_evaldy said:
Guys,
I just find out that the procedure in the video is not necessary. You don't need to open your phone. The command "fastboot oem edl" (in fastboot mode) or "adb reboot edl" (in adb mode) put your device in edl mode.
So, you just need use one of this commands, and then flash the file service rom.rar from video (or any other ROM you wanted).
Click to expand...
Click to collapse
or via miflash...open phone is not safe for all

leonardo_evaldy said:
Guys,
I just find out that the procedure in the video is not necessary. You don't need to open your phone. The command "fastboot oem edl" (in fastboot mode) or "adb reboot edl" (in adb mode) put your device in edl mode.
So, you just need use one of this commands, and then flash the file service rom.rar from video (or any other ROM you wanted).
Click to expand...
Click to collapse
If the phone is totally dead and hard bricked like in my case it will be impossible to boot it in fastboot mode, the only way is the EDL mode and to go in EDL you have just two ways: open the phone or buy an EDL cable.

Oh Thanks GOD Bro yiu just saved my Mi A3 Thank you so much for this tutorial because of this video i bring back my Mi A3 to life and works again God Bless You Brother you are amazing and smart man​

Thank you so so much bro...!!! your tutorial helped me to bring back my MI A3 to life.

euphore said:
Hey friends,
i bricked my devices and wasnt able to unbrick with QFIL.
But this way it works for me:
Download this repair rom: https://www.youtube.com/redirect?event=video_description&redir_token=QUFFLUhqbWtoeUgwQ3E3a3FwQUxFYzE3eUxPZG9LUEQzZ3xBQ3Jtc0tsNEVfamJQQ0NvWGFsbU9HdGR1aVBsbHJVZUtobmY2dk5VQ1M4UUVSdF9HMEVyTzFwM3NoNG9lQWxGV28tYjVkdzdIT0NNakJRczY3RVJZWUd2LUhCMzVrQjh0OGtud2RqblQ1V0lKLUZWRmRhZVhtMA&q=https://drive.google.com/drive/folders/1mcnv_OHcvuUkcyKjXNvLt54HU-2rNGiJ
Download MiFlash2020-3-14-0
FLASH IN EDL MODE
Thats all. Enjoy
Click to expand...
Click to collapse
That's good but what type of screws are used cause i am sure those aren't star screws

I uprom miui 12 for mi a3 include twrp, then after install rom miui 12.5 of cc9e (EU recovery), then logo mi forever still go to fastboot but then I open mobile use test point flash ROM miui 12 (clear all and lock) then dead brick, help me, i try flash follow video unbrick but still no ok