Develop Bugs

Bricked Mi9 se

Hey guys
My device is bricked .no fastboot no recovery and when I connect it to PC it's not showing on device manager.
Any suggestion?

It would be better to be more specific on how you bricked the device.
Does the device turn on and hang on a specific step or it is dead at all?
BTW, did you already tried to use Qualcomm Flash tools to get the device recognized from your PC?
You can also try with MiFlash or MiTool as well.

The phone has to be opened from the back and you can flash from the fast boot via Test Point and EDL MODE.
There is training on YouTube.

Flounderist said:
It would be better to be more specific on how you bricked the device.
Does the device turn on and hang on a specific step or it is dead at all?
BTW, did you already tried to use Qualcomm Flash tools to get the device recognized from your PC?
You can also try with MiFlash or MiTool as well.
Click to expand...
Click to collapse
After installing pixel experience I just want to restore my miui rom backup ant it failed and phone is fully bricked with no twrp fastboot etc
Will try it

farzad3620 said:
The phone has to be opened from the back and you can flash from the fast boot via Test Point and EDL MODE.
There is training on YouTube.
Click to expand...
Click to collapse
Will try that thankq

Moh3n.B said:
After installing pixel experience I just want to restore my miui rom backup ant it failed and phone is fully bricked with no twrp fastboot etc
Will try it
Click to expand...
Click to collapse
Would you mind to a little more specific?
At which point the device broke? It is stuck at boot logo? If you flashed a miui twrp backup probably vendor or firmware are mismatching.

Moh3n.B said:
After installing pixel experience I just want to restore my miui rom backup ant it failed and phone is fully bricked with no twrp fastboot etc
Will try it
Click to expand...
Click to collapse
Did you try to restore Data partition only, or did you try a full wipe and restoring the whole miui rom?
I think it's important for the community to know what moves can brick the device

I have the same problem. My cell phone is the mi9 SE. Has anyone managed to solve?

My device (mi 9 se) bricked .no fastboot no recovery and when I connect it to PC it's show qualcomm hs-usb qdloader 9008(com20) on device manager.
i couldnt flash rom with mi flash tool. its show this error:
[06:28:14 PM COM20]:[06:28:14 PM COM20]:dump:<?xml version="1.0" encoding="UTF-8" ?>
<data><log value="ERROR: Only nop and sig tag can be recevied before authentication." /></data><?xml version="1.0" encoding="UTF-8" ?>
<data><response value="NAK" rawmode="false" /></data>).
please help me to revive my phone.

i was in the exact same situation.
Sadly you can not flash in EDL unless you have an authorized account from xiaomi. which is unlikely that you have one. (all newer xiaomi phones need that)
you have to search for an service/people that have one.
you have to setup the phone in edl mode, and they will use teamviewer to use xiaomiflash and login and flash then.
there is an thread in mi9t pro forum, which approves such a service, (but i dont recommend that one, i used another)
https://forum.xda-developers.com/k20-pro/how-to/edl-flash-how-to-fix-hard-brick-t3968400

can I unbrick mi 9 se with box dongle on edl mod without mi account authentic?

leilim said:
can I unbrick mi 9 se with box dongle on edl mod without mi account authentic?
Click to expand...
Click to collapse
Any news. I also brick my 9 SE

Hi all, on my MI9 SE , when i uninstall Magisk from app, reboot only in FASTBOOT mode , but all method to flash newer boot.img or recovery.img or entire firmware from mflashTool.... dont work....
I tryed also with ADB , but not flash nothing.
I see my device in fastboot mode (fastboot devices) but after that i have always error
"FAILED (command write failed (Unknown error))"
and phone disconnect from fastboot....
Are There a method to force flash firmware? (ADB and MIFlashTool not able to prevent shutdown every command run)
thanks

[RMN8Pro][Global] Bootloop fix

Evening guys, let's fix the Bootloop of our RMN8Pro if we have installed a menu Recovery TWRP faulty/unsuitable or we have installed a ROM that does not belong to our smartphone.
This method is valid for China to global or Global to global.
NOT FOR INDIAN (sorry about that)
You'll need:
ADB files
Fastboot ROM V10.4.5.0.PGGEUXM
Download both files and unzip them in C:/ADB (if you don't have that folder... just create it)
You will need to rename the file extension of the file <<begonia_eea_global_images_V10.4.5.0.PGGEUXM_20191007.0000.0000_9.0_eea_f796762f8a.tgz>> from .tgz to .rar
Let's go!!
Turn the phone off, turn it on in fastboot mode (by pressing both POWER and VOL- ) and connect the phone to the PC with its USB cable.
Open a CMD command console (in administrator mode) in C:/ADB and type this (press enter when finished typing):
Code:
fastboot devices
If you have the drivers installed and everything goes well, a series of alphanumeric characters will appear, such as for example:
Code:
a6ghfxfv6 fastboot
Perfect, we can go on.
Next we will flash one by one the files needed to revive the phone.
Write the following lines and press enter at the end of each of them (wait for the files to be installed between line and line):
Code:
fastboot boot boot.img
fastboot flash system.img
fastboot flash vendor.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
When you're done, restart the phone with:
Code:
fastboot reboot
Congratulations, you have your RMN8Pro fixed.

klurosu said:
Evening, let's fix the Bootloop of our RMN8Pro if we have installed a menu Recovery TWRP faulty/unsuitable or we have installed a ROM that does not belong to our phone.
This method is valid for China to global or Global to global.
NOT FOR INDIAN (sorry about that)
You'll need:
ADB files
Fastboot ROM V10.4.5.0.PGGEUXM
Download both files and unzip them in C:/ADB (if you don't have that folder...create it)
You will need to rename the file extension of the file <<begonia_eea_global_images_V10.4.5.0.PGGEUXM_20191007.0000.0000_9.0_eea_f796762f8a.tgz>> from .tgz to .rar
Let's go!!
Turn the phone off, turn it on in fastboot mode (by pressing both POWER and VOL- ) and connect the phone to the PC with its USB cable.
Open a CMD command console (in administrator mode) in C:/ADB and type this (press enter when finished typing):
If you have the drivers installed and everything goes well, a series of alphanumeric characters will appear, such as for example:
Perfect, we can go on.
Next we will flash one by one the files needed to revive the phone.
Write the following lines and press enter at the end of each of them (wait for the files to be installed between line and line):
When you're done, restart the phone with:
Congratulations, you have your RMN8Pro fixed.
Click to expand...
Click to collapse
So, this is basically a guide of how to flash the images through fastboot, right? Why not just use MiFlash when we are in fastboot mode?

polfrank said:
So, this is basically a guide of how to flash the images through fastboot, right? Why not just use MiFlash when we are in fastboot mode?
Click to expand...
Click to collapse
Because it doesn't work???
Don't believe me?, Just try
send from an RMN8 Pro (xiaomi.eu custom rom)

Miflash will work if in fastboot and have an MI account had requested to unlock BL.
Don't believe me? You try.

idog8818 said:
Miflash will work if in fastboot and have an MI account had requested to unlock BL.
Don't believe me? You try.
Click to expand...
Click to collapse
You still need authorized account Sherlock.
(Omg this guys...)
send from an RMN8 Pro (xiaomi.eu custom rom)

klurosu said:
You still need authorized account Sherlock.
(Omg this guys...)
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
if you don't apply for the Mi account to unlock BL, how will you able to flash anything? Only 2 mins for a new account.....What the problem will be?

idog8818 said:
if you don't apply for the Mi account to unlock BL, how will you able to flash anything? Only 2 mins for a new account.....What the problem will be?
Click to expand...
Click to collapse
Read again (this time read well please) 2 posts above
send from an RMN8 Pro (xiaomi.eu custom rom)

klurosu said:
Read again (this time read well please) 2 posts above
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
Read again but didn't get it. What do you mean ....

idog8818 said:
Read again but didn't get it. What do you mean ....
Click to expand...
Click to collapse
That you still need an Authorized Xiaomi's Account to do that with the old method dude.
send from an RMN8 Pro (xiaomi.eu custom rom)

klurosu said:
That you still need an Authorized Xiaomi's Account to do that with the old method dude.
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
What do you mean by Authorized Xiaomi's Account?? As far as I know, there're 2 types of Mi accounts we commonly talk here.
1. Normal Mi account: used to unlock BL and this can be used in miflash to flash rom, I've tried 100 times in fastboot, and works every time. I registered this account I guess 5 years ago when I need to request unlock BL on note 3 . As I said above, it needs 2 mins to register.
2. Authorised service account: This is not we can easy to register, It's for Mi service center or developers for repair/develop purposes. If no rec, no recovery, blank screen, it can be recovered by SP flash tool, which will need this type of account. This is also why users in following post looking for unbricking.
[GUIDE] [begonia] UNBRICK - stuck on DA mode / Authorised Service Account required
https://forum.xda-developers.com/re...a-mode-authorised-t4000433/page7#post81175069
---------- Post added at 01:20 AM ---------- Previous post was at 01:17 AM ----------
I can prove this by my bricked redmi note 8 pro.
I used my mi account to unlock BL, flashed global rom, but I cannot use it in SP FLASH TOOL to restore because my MI account is not an Authorised Service Account

Hello,
I have a nex Redmi Note 8 pro, I unlocked it after I use Ifixit.. to install twrp, the phone was in bootloap, after I tried to flash with fastboot commands. Now the phone is off and I have a black screeen. I can't power it on (vol + or -) does not work. power on no more. It is not recognized with miunlock. No fastboot nor recovery. Please help me how I can do?

nutellamarco said:
Hello,
I have a nex Redmi Note 8 pro, I unlocked it after I use Ifixit.. to install twrp, the phone was in bootloap, after I tried to flash with fastboot commands. Now the phone is off and I have a black screeen. I can't power it on (vol + or -) does not work. power on no more. It is not recognized with miunlock. No fastboot nor recovery. Please help me how I can do?
Click to expand...
Click to collapse
At the moment you only can do a deep flashing in EDL mode, and need an authorized account... You need to contact someone with this type of account and flash... ( And give some money...)

nutellamarco said:
Hello,
I have a nex Redmi Note 8 pro, I unlocked it after I use Ifixit.. to install twrp, the phone was in bootloap, after I tried to flash with fastboot commands. Now the phone is off and I have a black screeen. I can't power it on (vol + or -) does not work. power on no more. It is not recognized with miunlock. No fastboot nor recovery. Please help me how I can do?
Click to expand...
Click to collapse
Some people are saying they managed to bring to life a phone without rocovery without fastboot mode.search and maybe you find a way. As i remember they said with phone turned off you press volume - and power and you have about 5 seconds to flash. I don't know more details.i wish you success

hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.

nutellamarco said:
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.
Click to expand...
Click to collapse
as far as I know spflash tool should be ready to flash,. it means with all the files selected, the combination is keeping vol+ and connect the USB cable to PC port, I recommend you search in Google about flashing mediatek devices... Good luck

Literally this guide is really about just how to flash with fastboot instead of Mi Flash(tool which can use anyone with Xiaomi Phone - doesn't require Authorized Service ACC)
nutellamarco said:
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.
Click to expand...
Click to collapse
I had this problem at the weekend(Stuck at EDL mode - tried to flash with SP tool but without success(needed service acc - brom error)), you can use SP flash tool with authorized service acc - fastest way, maybe there will be some cracked security file in the future as one for redmi 6. Or do battery trick. You are stick at EDL mode and cannot reboot from it. You can wait to discharge your phone(Tooks ~2 day with pushed power button) then connect into computer and when the led turn less bright use vol - + power to get into fastboot or disconnect battery and reconnect with pushed vol - to get into fastboot(I have used this three times because of installing wrong recovery).

Aglik-x said:
Literally this guide is really about just how to flash with fastboot instead of Mi Flash(tool which can use anyone with Xiaomi Phone - doesn't require Authorized Service ACC)
I had this problem at the weekend(Stuck at EDL mode - tried to flash with SP tool but without success(needed service acc - brom error)), you can use SP flash tool with authorized service acc - fastest way, maybe there will be some cracked security file in the future as one for redmi 6. Or do battery trick. You are stick at EDL mode and cannot reboot from it. You can wait to discharge your phone(Tooks ~2 day with pushed power button) then connect into computer and when the led turn less bright use vol - + power to get into fastboot or disconnect battery and reconnect with pushed vol - to get into fastboot(I have used this three times because of installing wrong recovery).
Click to expand...
Click to collapse
Thanks a lot for your reply
I will do that. But How I can know that phone is on to discharge battery? Best regards

nutellamarco said:
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.[/QUOTE
My oneplus 6 I used to do kind of the same thing... With the phone plugged and everything ready to flash... I used to press - plus power button and it would starting the process..
Click to expand...
Click to collapse

petenoni said:
nutellamarco said:
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.[/QUOTE
My oneplus 6 I used to do kind of the same thing... With the phone plugged and everything ready to flash... I used to press - plus power button and it would starting the process..
Click to expand...
Click to collapse
I try this method, the spflash does not start
I tried all touche combinaisons.
I will wait until the battery were empty and try again.
Thanks for your reply
Click to expand...
Click to collapse

bootloop fix worked for me
I try to post this yesterday but nothing happened so what i did was...
i installed TWRP and in twrp i wipe all data , system, vendor and reboot phone. that was wrong and i stuck in bootloop. so i go back to fastboot and type commands as u say....
fastboot boot boot.img
fastboot flash system.img
fastboot flash vendor.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img - nothing worked
maybe u forgot some commands.... so i use...
fastboot boot boot.img -dont use, it didnt work
fastboot flash system system.img -ok
fastboot flash vendor vendor.img -ok
fastboot flash cust cust.img -ok
fastboot flash recovery recovery.img - but instead of official recovery i used TWRP.img and after reboot a finally boot into TWRP and i flash xiaomi.eu rom and after reboot magisk and all works fine. im not developer but this method worked for me and excuse my english i have global device

system destroyed, when in fastboot mode and plug to the pc (device not recognised)

So, a few months ago I rooted my device with twrp and then installed magisk manager... A few days later the manager stopped working and I got tired of not being able do do nothing so I tried to unroot. I used mi flash to flash the daisy rom and it didn't work so I tried to load to the twrp app and flash through there. Didn't work either. From then on every time I boot the device it shows the message "the system has been destroyed" and Bc of that I searched for solutions. I kinda found one. I boot to fastboot mode and with the platform tools I write on the command line ". /fastboot devices" and then it shows my device. After I write ". /fastboot boot continue" and it starts booting the device and it has worked for like 2 months but 2 days ago I had to reboot my device Bc it started to freeze but when I load to fastboot mode and plug it to the pc it show a prompt saying "the device is not recognized" and the device reboots to the message "system has been destroyed". Pls help, I've searched everywhere and didn't find any solution

Are you have your bootloader unlocked? I guess no, the most "easy" solution for your problem is test point , never fail, you need to download Qualcomm drivers (search in Google) open your device connect your device, your phone need to be recognized like 9008 in manager drivers of your PC then flash stock room in mi flash (flash all option) my recommendation is flash 10.0.13.0 or 10.0.18 version of stock rom, good luck.

Os_Herdz said:
Are you have your bootloader unlocked? I guess no, the most "easy" solution for your problem is test point , never fail, you need to download Qualcomm drivers (search in Google) open your device connect your device, your phone need to be recognized like 9008 in manager drivers of your PC then flash stock room in mi flash (flash all option) my recommendation is flash 10.0.13.0 or 10.0.18 version of stock rom, good luck.
Click to expand...
Click to collapse
Yes, my bootloader is unlocked, and is not recognized on the miflash tool.
I cant't even boot the phone to edl mode

0flip3 said:
Yes, my bootloader is unlocked, and is not recognized on the miflash tool.
I cant't even boot the phone to edl mode
Click to expand...
Click to collapse
you are trying to get to edl mode by typing command "fastboot oem edl" when phone is in fastboot?

Flashing using MI Flash got stuck

Hello,
I'm using Redmi Note 5 pro. Recently my device went on boot loop. Whenever I tried to restart, it was showing MI Logo for long time, nothing happens. I'm not able to enter into recovery mode as well (Vol Up + Power). But I can go to Fastboot mode (Vol down + power key).
Mine is not bootloader unlocked and I dont think I have enabled OEM Unlocking from the settings.
I tried downloading the ROM from below URL (Rom for Fastboot flash) -> whyred_global_images_V11.0.3.0.PEIMIXM_20191108.0000.00_9.0_global
http://c.mi.com/in/miuidownload/detail?guide=2
http://update.miui.com/updates/v1/fullromdownload.php?d=whyred_global&b=F&r=global&n=
When I check, whether the fastboot devices is showing mine or not, I can see my device listed
In another forum, I can across this, before flashing using MiFlash, they asked to download the Edl.cmd file from the below link and run it. I did that as well.
https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292
After that, when I select the downloaded ROM, and try to flash it with MiFlash (v2019.12.6.0), it keep showing the below line. but its not getting errored out. progress bar keeps going till the end but it stays with the below status. Attached the screenshot as well.
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *whyred" || echo Missmatching image and device
Any help with will be much helpful! Thanks in advance!

I think flashing via fastboot on unlocked bootloader is not possible

Hi, you mean locked bootloader is not possible?
If yes, is there a way to fix the phone?
Thanks in advance!

karthik623521 said:
Hi, you mean locked bootloader is not possible?
If yes, is there a way to fix the phone?
Thanks in advance!
Click to expand...
Click to collapse
The way i see is Edl flash mode (wait for a proper answer)

I accidentally locked my chinese whyred while flashing global rom using miflash.
The only thing that worked for me was EDL flash chinese rom using QFIL following the tutorial here: https://forum.xda-developers.com/redmi-note-5-pro/how-to/fix-arb-bricked-device-qfil-t3841780
I had to use chinese rom for 360 hours until I could unlock the bootloader again.
You need to flash the rom version that matches your device origin (global, china, india, russia, etc..)

tsarig said:
I accidentally locked my chinese whyred while flashing global rom using miflash.
The only thing that worked for me was EDL flash chinese rom using QFIL following the tutorial here: https://forum.xda-developers.com/redmi-note-5-pro/how-to/fix-arb-bricked-device-qfil-t3841780
I had to use chinese rom for 360 hours until I could unlock the bootloader again.
You need to flash the rom version that matches your device origin (global, china, india, russia, etc..)
Click to expand...
Click to collapse
Hello, Thanks for letting me know about this method. I tried this but I'm not able to find my devices showing in Device Manager as "qualcomm hs-usb qdloader 9008" (I'm trying with fastboot mode as am not able to go to Recovery mode)
I tried installing the Qualcomm QDLoader 9008 driver using the method shown in the below link
https://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
1. tried direct installation of exe - didn't work)
2. there was manual method which asked me to reboot in edl mode using the command fastboot oem edl - but this shows error saying FAILED (remote: 'Device is already locked!')
//attached screenshot for reference
Thanks!

karthik623521 said:
Hello, Thanks for letting me know about this method. I tried this but I'm not able to find my devices showing in Device Manager as "qualcomm hs-usb qdloader 9008" (I'm trying with fastboot mode as am not able to go to Recovery mode)
I tried installing the Qualcomm QDLoader 9008 driver using the method shown in the below link
https://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
1. tried direct installation of exe - didn't work)
2. there was manual method which asked me to reboot in edl mode using the command fastboot oem edl - but this shows error saying FAILED (remote: 'Device is already locked!')
//attached screenshot for reference
Thanks!
Click to expand...
Click to collapse
You're in fastboot. not EDL mode.
EDL Testpoint - https://youtu.be/dYVR5BgNwG0
Connect the usb cable to both phone and pc, disconnect the battery flex cable, short the two EDL testpoint, and connect the battery flex cable. it will take some practice.
Also, there is a limited time in EDL mode to start flashing, if you too late you will have to repeat again.
Use this tutorial https://youtu.be/ikGsxf_s-zw

It seems shorting pins and edl flashing is the only way for reviving ur phone pal
Good luck

This way I unbrick MI A3 - NO QFIL

Hey friends,
i bricked my devices and wasnt able to unbrick with QFIL.
But this way it works for me:
Download this repair rom: https://www.youtube.com/redirect?ev...ive/folders/1mcnv_OHcvuUkcyKjXNvLt54HU-2rNGiJ
Download MiFlash2020-3-14-0
FLASH IN EDL MODE
Thats all. Enjoy

Thanks for sharing

euphore said:
Hey friends,
i bricked my devices and wasnt able to unbrick with QFIL.
But this way it works for me:
Download this repair rom: https://www.youtube.com/redirect?event=video_description&redir_token=QUFFLUhqbWtoeUgwQ3E3a3FwQUxFYzE3eUxPZG9LUEQzZ3xBQ3Jtc0tsNEVfamJQQ0NvWGFsbU9HdGR1aVBsbHJVZUtobmY2dk5VQ1M4UUVSdF9HMEVyTzFwM3NoNG9lQWxGV28tYjVkdzdIT0NNakJRczY3RVJZWUd2LUhCMzVrQjh0OGtud2RqblQ1V0lKLUZWRmRhZVhtMA&q=https://drive.google.com/drive/folders/1mcnv_OHcvuUkcyKjXNvLt54HU-2rNGiJ
Download MiFlash2020-3-14-0
FLASH IN EDL MODE
Thats all. Enjoy
Click to expand...
Click to collapse
Nice sharing! Could be helpfull for many users

Thanks for sharing, it worked perfectly for me.

I think is not necessary open the phone... Using miflash with normal usb c cable is more simply and safe. The procedure is: install miflash, install xiaomi ad QUALCOMM driver. Connect phone in edl mode via usb. Now a new vom port will be installed. Refresh button in miflash. Flash the edl rom. Thats all. Open the smartphone not rewuired

euphore said:
Hey friends,
i bricked my devices and wasnt able to unbrick with QFIL.
But this way it works for me:
Download this repair rom: https://www.youtube.com/redirect?event=video_description&redir_token=QUFFLUhqbWtoeUgwQ3E3a3FwQUxFYzE3eUxPZG9LUEQzZ3xBQ3Jtc0tsNEVfamJQQ0NvWGFsbU9HdGR1aVBsbHJVZUtobmY2dk5VQ1M4UUVSdF9HMEVyTzFwM3NoNG9lQWxGV28tYjVkdzdIT0NNakJRczY3RVJZWUd2LUhCMzVrQjh0OGtud2RqblQ1V0lKLUZWRmRhZVhtMA&q=https://drive.google.com/drive/folders/1mcnv_OHcvuUkcyKjXNvLt54HU-2rNGiJ
Download MiFlash2020-3-14-0
FLASH IN EDL MODE
Thats all. Enjoy
Click to expand...
Click to collapse
Thanks, man. It worked perfectly for my.

Guys,
I just find out that the procedure in the video is not necessary. You don't need to open your phone. The command "fastboot oem edl" (in fastboot mode) or "adb reboot edl" (in adb mode) put your device in edl mode.
So, you just need use one of this commands, and then flash the file service rom.rar from video (or any other ROM you wanted).

leonardo_evaldy said:
Guys,
I just find out that the procedure in the video is not necessary. You don't need to open your phone. The command "fastboot oem edl" (in fastboot mode) or "adb reboot edl" (in adb mode) put your device in edl mode.
So, you just need use one of this commands, and then flash the file service rom.rar from video (or any other ROM you wanted).
Click to expand...
Click to collapse
or via miflash...open phone is not safe for all

leonardo_evaldy said:
Guys,
I just find out that the procedure in the video is not necessary. You don't need to open your phone. The command "fastboot oem edl" (in fastboot mode) or "adb reboot edl" (in adb mode) put your device in edl mode.
So, you just need use one of this commands, and then flash the file service rom.rar from video (or any other ROM you wanted).
Click to expand...
Click to collapse
If the phone is totally dead and hard bricked like in my case it will be impossible to boot it in fastboot mode, the only way is the EDL mode and to go in EDL you have just two ways: open the phone or buy an EDL cable.

Oh Thanks GOD Bro yiu just saved my Mi A3 Thank you so much for this tutorial because of this video i bring back my Mi A3 to life and works again God Bless You Brother you are amazing and smart man​

Thank you so so much bro...!!! your tutorial helped me to bring back my MI A3 to life.

euphore said:
Hey friends,
i bricked my devices and wasnt able to unbrick with QFIL.
But this way it works for me:
Download this repair rom: https://www.youtube.com/redirect?event=video_description&redir_token=QUFFLUhqbWtoeUgwQ3E3a3FwQUxFYzE3eUxPZG9LUEQzZ3xBQ3Jtc0tsNEVfamJQQ0NvWGFsbU9HdGR1aVBsbHJVZUtobmY2dk5VQ1M4UUVSdF9HMEVyTzFwM3NoNG9lQWxGV28tYjVkdzdIT0NNakJRczY3RVJZWUd2LUhCMzVrQjh0OGtud2RqblQ1V0lKLUZWRmRhZVhtMA&q=https://drive.google.com/drive/folders/1mcnv_OHcvuUkcyKjXNvLt54HU-2rNGiJ
Download MiFlash2020-3-14-0
FLASH IN EDL MODE
Thats all. Enjoy
Click to expand...
Click to collapse
That's good but what type of screws are used cause i am sure those aren't star screws

I uprom miui 12 for mi a3 include twrp, then after install rom miui 12.5 of cc9e (EU recovery), then logo mi forever still go to fastboot but then I open mobile use test point flash ROM miui 12 (clear all and lock) then dead brick, help me, i try flash follow video unbrick but still no ok