Evening guys, let's fix the Bootloop of our RMN8Pro if we have installed a menu Recovery TWRP faulty/unsuitable or we have installed a ROM that does not belong to our smartphone.
This method is valid for China to global or Global to global.
NOT FOR INDIAN (sorry about that)
You'll need:
ADB files
Fastboot ROM V10.4.5.0.PGGEUXM
Download both files and unzip them in C:/ADB (if you don't have that folder... just create it)
You will need to rename the file extension of the file <<begonia_eea_global_images_V10.4.5.0.PGGEUXM_20191007.0000.0000_9.0_eea_f796762f8a.tgz>> from .tgz to .rar
Let's go!!
Turn the phone off, turn it on in fastboot mode (by pressing both POWER and VOL- ) and connect the phone to the PC with its USB cable.
Open a CMD command console (in administrator mode) in C:/ADB and type this (press enter when finished typing):
Code:
fastboot devices
If you have the drivers installed and everything goes well, a series of alphanumeric characters will appear, such as for example:
Code:
a6ghfxfv6 fastboot
Perfect, we can go on.
Next we will flash one by one the files needed to revive the phone.
Write the following lines and press enter at the end of each of them (wait for the files to be installed between line and line):
Code:
fastboot boot boot.img
fastboot flash system.img
fastboot flash vendor.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
When you're done, restart the phone with:
Code:
fastboot reboot
Congratulations, you have your RMN8Pro fixed.
klurosu said:
Evening, let's fix the Bootloop of our RMN8Pro if we have installed a menu Recovery TWRP faulty/unsuitable or we have installed a ROM that does not belong to our phone.
This method is valid for China to global or Global to global.
NOT FOR INDIAN (sorry about that)
You'll need:
ADB files
Fastboot ROM V10.4.5.0.PGGEUXM
Download both files and unzip them in C:/ADB (if you don't have that folder...create it)
You will need to rename the file extension of the file <<begonia_eea_global_images_V10.4.5.0.PGGEUXM_20191007.0000.0000_9.0_eea_f796762f8a.tgz>> from .tgz to .rar
Let's go!!
Turn the phone off, turn it on in fastboot mode (by pressing both POWER and VOL- ) and connect the phone to the PC with its USB cable.
Open a CMD command console (in administrator mode) in C:/ADB and type this (press enter when finished typing):
If you have the drivers installed and everything goes well, a series of alphanumeric characters will appear, such as for example:
Perfect, we can go on.
Next we will flash one by one the files needed to revive the phone.
Write the following lines and press enter at the end of each of them (wait for the files to be installed between line and line):
When you're done, restart the phone with:
Congratulations, you have your RMN8Pro fixed.
Click to expand...
Click to collapse
So, this is basically a guide of how to flash the images through fastboot, right? Why not just use MiFlash when we are in fastboot mode?
polfrank said:
So, this is basically a guide of how to flash the images through fastboot, right? Why not just use MiFlash when we are in fastboot mode?
Click to expand...
Click to collapse
Because it doesn't work???
Don't believe me?, Just try
send from an RMN8 Pro (xiaomi.eu custom rom)
Miflash will work if in fastboot and have an MI account had requested to unlock BL.
Don't believe me? You try.
idog8818 said:
Miflash will work if in fastboot and have an MI account had requested to unlock BL.
Don't believe me? You try.
Click to expand...
Click to collapse
You still need authorized account Sherlock.
(Omg this guys...)
send from an RMN8 Pro (xiaomi.eu custom rom)
klurosu said:
You still need authorized account Sherlock.
(Omg this guys...)
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
if you don't apply for the Mi account to unlock BL, how will you able to flash anything? Only 2 mins for a new account.....What the problem will be?
idog8818 said:
if you don't apply for the Mi account to unlock BL, how will you able to flash anything? Only 2 mins for a new account.....What the problem will be?
Click to expand...
Click to collapse
Read again (this time read well please) 2 posts above
send from an RMN8 Pro (xiaomi.eu custom rom)
klurosu said:
Read again (this time read well please) 2 posts above
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
Read again but didn't get it. What do you mean ....
idog8818 said:
Read again but didn't get it. What do you mean ....
Click to expand...
Click to collapse
That you still need an Authorized Xiaomi's Account to do that with the old method dude.
send from an RMN8 Pro (xiaomi.eu custom rom)
klurosu said:
That you still need an Authorized Xiaomi's Account to do that with the old method dude.
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
What do you mean by Authorized Xiaomi's Account?? As far as I know, there're 2 types of Mi accounts we commonly talk here.
1. Normal Mi account: used to unlock BL and this can be used in miflash to flash rom, I've tried 100 times in fastboot, and works every time. I registered this account I guess 5 years ago when I need to request unlock BL on note 3 . As I said above, it needs 2 mins to register.
2. Authorised service account: This is not we can easy to register, It's for Mi service center or developers for repair/develop purposes. If no rec, no recovery, blank screen, it can be recovered by SP flash tool, which will need this type of account. This is also why users in following post looking for unbricking.
[GUIDE] [begonia] UNBRICK - stuck on DA mode / Authorised Service Account required
https://forum.xda-developers.com/re...a-mode-authorised-t4000433/page7#post81175069
---------- Post added at 01:20 AM ---------- Previous post was at 01:17 AM ----------
I can prove this by my bricked redmi note 8 pro.
I used my mi account to unlock BL, flashed global rom, but I cannot use it in SP FLASH TOOL to restore because my MI account is not an Authorised Service Account
Hello,
I have a nex Redmi Note 8 pro, I unlocked it after I use Ifixit.. to install twrp, the phone was in bootloap, after I tried to flash with fastboot commands. Now the phone is off and I have a black screeen. I can't power it on (vol + or -) does not work. power on no more. It is not recognized with miunlock. No fastboot nor recovery. Please help me how I can do?
nutellamarco said:
Hello,
I have a nex Redmi Note 8 pro, I unlocked it after I use Ifixit.. to install twrp, the phone was in bootloap, after I tried to flash with fastboot commands. Now the phone is off and I have a black screeen. I can't power it on (vol + or -) does not work. power on no more. It is not recognized with miunlock. No fastboot nor recovery. Please help me how I can do?
Click to expand...
Click to collapse
At the moment you only can do a deep flashing in EDL mode, and need an authorized account... You need to contact someone with this type of account and flash... ( And give some money...)
nutellamarco said:
Hello,
I have a nex Redmi Note 8 pro, I unlocked it after I use Ifixit.. to install twrp, the phone was in bootloap, after I tried to flash with fastboot commands. Now the phone is off and I have a black screeen. I can't power it on (vol + or -) does not work. power on no more. It is not recognized with miunlock. No fastboot nor recovery. Please help me how I can do?
Click to expand...
Click to collapse
Some people are saying they managed to bring to life a phone without rocovery without fastboot mode.search and maybe you find a way. As i remember they said with phone turned off you press volume - and power and you have about 5 seconds to flash. I don't know more details.i wish you success
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.
nutellamarco said:
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.
Click to expand...
Click to collapse
as far as I know spflash tool should be ready to flash,. it means with all the files selected, the combination is keeping vol+ and connect the USB cable to PC port, I recommend you search in Google about flashing mediatek devices... Good luck
Literally this guide is really about just how to flash with fastboot instead of Mi Flash(tool which can use anyone with Xiaomi Phone - doesn't require Authorized Service ACC)
nutellamarco said:
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.
Click to expand...
Click to collapse
I had this problem at the weekend(Stuck at EDL mode - tried to flash with SP tool but without success(needed service acc - brom error)), you can use SP flash tool with authorized service acc - fastest way, maybe there will be some cracked security file in the future as one for redmi 6. Or do battery trick. You are stick at EDL mode and cannot reboot from it. You can wait to discharge your phone(Tooks ~2 day with pushed power button) then connect into computer and when the led turn less bright use vol - + power to get into fastboot or disconnect battery and reconnect with pushed vol - to get into fastboot(I have used this three times because of installing wrong recovery).
Aglik-x said:
Literally this guide is really about just how to flash with fastboot instead of Mi Flash(tool which can use anyone with Xiaomi Phone - doesn't require Authorized Service ACC)
I had this problem at the weekend(Stuck at EDL mode - tried to flash with SP tool but without success(needed service acc - brom error)), you can use SP flash tool with authorized service acc - fastest way, maybe there will be some cracked security file in the future as one for redmi 6. Or do battery trick. You are stick at EDL mode and cannot reboot from it. You can wait to discharge your phone(Tooks ~2 day with pushed power button) then connect into computer and when the led turn less bright use vol - + power to get into fastboot or disconnect battery and reconnect with pushed vol - to get into fastboot(I have used this three times because of installing wrong recovery).
Click to expand...
Click to collapse
Thanks a lot for your reply
I will do that. But How I can know that phone is on to discharge battery? Best regards
nutellamarco said:
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.[/QUOTE
My oneplus 6 I used to do kind of the same thing... With the phone plugged and everything ready to flash... I used to press - plus power button and it would starting the process..
Click to expand...
Click to collapse
petenoni said:
nutellamarco said:
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.[/QUOTE
My oneplus 6 I used to do kind of the same thing... With the phone plugged and everything ready to flash... I used to press - plus power button and it would starting the process..
Click to expand...
Click to collapse
I try this method, the spflash does not start
I tried all touche combinaisons.
I will wait until the battery were empty and try again.
Thanks for your reply
Click to expand...
Click to collapse
bootloop fix worked for me
I try to post this yesterday but nothing happened so what i did was...
i installed TWRP and in twrp i wipe all data , system, vendor and reboot phone. that was wrong and i stuck in bootloop. so i go back to fastboot and type commands as u say....
fastboot boot boot.img
fastboot flash system.img
fastboot flash vendor.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img - nothing worked
maybe u forgot some commands.... so i use...
fastboot boot boot.img -dont use, it didnt work
fastboot flash system system.img -ok
fastboot flash vendor vendor.img -ok
fastboot flash cust cust.img -ok
fastboot flash recovery recovery.img - but instead of official recovery i used TWRP.img and after reboot a finally boot into TWRP and i flash xiaomi.eu rom and after reboot magisk and all works fine. im not developer but this method worked for me and excuse my english i have global device
Related
I have a two phones.
Mi Max 3/32 : Global 8.1.6.0. I recieved OTA to 8.2.1.0. Start downloading, on 40%+- phone freeze and reboot. Stuck on MI logo and dont boot. Dont show powered by android. Just mi logo.
Then i flash 8.2.1.0 trough MiFlash, bootloader locked, and... Same situation. Stuck on bootlogo. I Flash china rom, i flash global, flash older version. Come on Xiaomi! What wrong with you?!
Okay. Story #2
Mi max pro 3/64. Global 8.0.3.0. I downloading OTA, press instal, phone reboot and go install update. Ok. After this process, phone boot and... Cycle reboot. Again and again. On launcher, on setup wizards, on mi logo. Everywhere. Hmmm, okay, i open miflash repeat all as in story #1. Not effect. Zero. Cycle reboot. How?!
I dont know.
Both phones not bricks. But and dont work.
Debugging on usb is a necessary? I dont activated bcaz my phones dont booted. Funny, yeah.
Can it connect via adb?
Sent from my MI MAX using Tapatalk
RAMBO29 said:
Can it connect via adb?
Sent from my MI MAX using Tapatalk
Click to expand...
Click to collapse
yes
If it can connect via adb, flash via EDL mode and see.
If you are on miu you must check developer settings cause miui time to time unchecks option oem unlocking (in my case two times) for this reason ever i look at this and allow usb debugging always must be allowed and look at dev options is absolutely necessary to correct flash of roms, may be you are rooted when you tried to update and system cannot update by this way (device itself or autoupdate). to solve try first installing same version through fastboot, probably yet you don`t loose your data. but you must select option "flash_all_except_storage" from your unpacket zip rom
IndDoc said:
If it can connect via adb, flash via EDL mode and see.
Click to expand...
Click to collapse
hmm, for this it is necessary unlock boot?
SubwayChamp said:
If you are on miu you must check developer settings cause miui time to time unchecks option oem unlocking (in my case two times) for this reason ever i look at this and allow usb debugging always must be allowed and look at dev options is absolutely necessary to correct flash of roms, may be you are rooted when you tried to update and system cannot update by this way (device itself or autoupdate). to solve try first installing same version through fastboot, probably yet you don`t loose your data. but you must select option "flash_all_except_storage" from your unpacket zip rom
Click to expand...
Click to collapse
okay,
I did so. flash firmware and immediately bootloop. no root.
Dark_Eyes said:
hmm, for this it is necessary unlock boot?
Click to expand...
Click to collapse
Not required if you're going to flash the stable version.
IndDoc said:
Not required if you're going to flash the stable version.
Click to expand...
Click to collapse
sorry my mistake, i try but fastboot devices comand work (see device), adb ... not.
flash via fastboot
FAILED (remote: device is locked. Cannot erase).
need to unlock, yep?
That's not EDL, that's fastboot. See here for a guide how to use EDL mode.
IndDoc said:
That's not EDL, that's fastboot. See here for a guide how to use EDL mode.
Click to expand...
Click to collapse
i know about that. but my phones flashing via miflash (edl mode, Qualcomm HS-USB QDLoader 9008) and no boot (mi logo or mi logo plus powered by android stuck 5-10-15-55 mins)
why? i dont know.
upd. It's a MIRACLE. one phone (3/32) is ALIVE
Dark_Eyes said:
i know about that. but my phones flashing via miflash (edl mode, Qualcomm HS-USB QDLoader 9008) and no boot (mi logo or mi logo plus powered by android stuck 5-10-15-55 mins)
why? i dont know.
upd. It's a MIRACLE. one phone (3/32) is ALIVE
Click to expand...
Click to collapse
Good! Make sure you are flashing the right verison. If your phone is stuck on 'powered by android' screen, it's a good sign. It means your phone will eventually boot up.
IndDoc said:
Good! Make sure you are flashing the right verison. If your phone is stuck on 'powered by android' screen, it's a good sign. It means your phone will eventually boot up.
Click to expand...
Click to collapse
this is not quite right.
2nd phone flashing, booting, setup wizard (white screen, w\out miui 8 logo, freeze, reboot. cycle.)
1st phone working 5-7 min, freeze and reboot, stuck mi logo w\out powered by android. damn.
Dark_Eyes said:
this is not quite right.
2nd phone flashing, booting, setup wizard (white screen, w\out miui 8 logo, freeze, reboot. cycle.)
1st phone working 5-7 min, freeze and reboot, stuck mi logo w\out powered by android. damn.
Click to expand...
Click to collapse
Sounds like you have a hardware problem. Take it to a service center.
IndDoc said:
Sounds like you have a hardware problem. Take it to a service center.
Click to expand...
Click to collapse
agree, it seems. thank you.
Dark_Eyes said:
this is not quite right.
2nd phone flashing, booting, setup wizard (white screen, w\out miui 8 logo, freeze, reboot. cycle.)
1st phone working 5-7 min, freeze and reboot, stuck mi logo w\out powered by android. damn.
Click to expand...
Click to collapse
Well, let me tell the way that I flash exactly, for me works perfectly, EDL never work for me. Flash for fastboot couldn't work properly if you place files in any side of your PC. I place adb folder in main disk, in my case c:, unpack all the files of you rom beside the 4 files of adb in same folder (adb has created a path in system environment) then in mode fastboot with usb plugged device (how you loosed your data) right click on "flash_all" for rom can repair your partitions. (I don't remember now if appears with right click option to execute like an administrator better) don't use meanwhile your pc. may that help you
SubwayChamp said:
Well, let me tell the way that I flash exactly, for me works perfectly, EDL never work for me. Flash for fastboot couldn't work properly if you place files in any side of your PC. I place adb folder in main disk, in my case c:, unpack all the files of you rom beside the 4 files of adb in same folder (adb has created a path in system environment) then in mode fastboot with usb plugged device (how you loosed your data) right click on "flash_all" for rom can repair your partitions. (I don't remember now if appears with right click option to execute like an administrator better) don't use meanwhile your pc. may that help you
Click to expand...
Click to collapse
correct me:
you reboot to fastboot (vol- + power), rabbit logo, connect usb w\out pressing any buttons
create folder adb (4files adb + all files of firmware w\out folder image)
and run flash all
unlock boot required?
Dark_Eyes said:
correct me:
you reboot to fastboot (vol- + power), rabbit logo, connect usb w\out pressing any buttons
create folder adb (4files adb + all files of firmware w\out folder image)
and run flash all
unlock boot required?
Click to expand...
Click to collapse
Yes, mode fastboot in device with any trick like EDL, just connect to pc, no unlock bootloader required but must be an stock rom, fastboot image rom
SubwayChamp said:
Yes, mode fastboot in device with any trick like EDL, just connect to pc, no unlock bootloader required but must be an stock rom, fastboot image rom
Click to expand...
Click to collapse
after i click flash all, window appears 1 sec and all. no effect. what wrong?
Dark_Eyes said:
after i click flash all, window appears 1 sec and all. no effect. what wrong?
Click to expand...
Click to collapse
Recogniced device?, type first fastboot devices to be sure
I just bricked my phone :crying: :crying:
I wanna get back to the official rom, after trying android P (without make it work).
(the rom is from http://en.miui.com/download-354.html)
But I run the wrong script and take the flash_all_lock.img
And my device is stuck on android 8.1 bootloop (It boot, but i get an animated line loop ...)
Any ideas or tricks before i get it back to warranty ?
Thanks
Unlock bootloader and flash again. You can find a guide to unlock bootloader at the beginning of this guide.
BubuXP said:
Unlock bootloader and flash again. You can find a guide to unlock bootloader at the beginning of this guide.
Click to expand...
Click to collapse
But since I flashed the official rom with data whipe, I'm unable to go to dev option and enter OEM Unlocking .... And Fastboot respond me that my device is locked
Seems like my only option left is to boot into EDL mode ...
But seems fastboot oem edl does not work I don't lnow how to handle the problem
droopeur said:
Seems like my only option left is to boot into EDL mode ...
But seems fastboot oem edl does not work I don't lnow how to handle the problem
Click to expand...
Click to collapse
Have you tried to switch the active slot?
Try if it boots using
fastboot set_active a
or
fastboot set_active b
If not working, can you enter recovery (power on with Volume up button pressed)?
If you can enter recovery, hold down the power button for 3-5 seconds and then press and release the Volume up button, to make commands appear. Then your only hope is to install the OTA update zip from there (copy the OTA in a microSD card, there is a thread where you can find the link to the OTA zip).
In my opinion, "OEM unlocking" in developer options MUST be always keep active, because incidents like this could happen, and because even without modding, an OTA could go wrong resulting in your same situation.
I was in your same situation (OEM unlocking disabled and then I locked bootloader with a custom ROM installed) with a Nexus 5X.
I don't remember well how I fixed it, but I remember entering in Qualcomm download mode (should be the same EDL mode) and loading a file found after many hours of research in strange forums and sites.
BubuXP said:
Have you tried to switch the active slot?
Try if it boots using
fastboot set_active a
or
fastboot set_active b
Click to expand...
Click to collapse
In fact, both work, but my phone still stucked at the bootloader (infinite line animation in both cases).
BubuXP said:
If not working, can you enter recovery (power on with Volume up button pressed)?
If you can enter recovery, hold down the power button for 3-5 seconds and then press and release the Volume up button, to make commands appear. Then your only hope is to install the OTA update zip from there (copy the OTA in a microSD card, there is a thread where you can find the link to the OTA zip).
Click to expand...
Click to collapse
Yes I can enter recovery and I have already tried this, but I always end up with the error:
Code:
E: Unknow volume for path [/sideload/package.zip]
Verifying update package...
Update package verification took 17.3 s (result 0)
Installing update...
E:Error il /sideload/package.zip (Status 1)
Installation aborted
BubuXP said:
In my opinion, "OEM unlocking" in developer options MUST be always keep active, because incidents like this could happen, and because even without modding, an OTA could go wrong resulting in your same situation.
I was in your same situation (OEM unlocking disabled and then I locked bootloader with a custom ROM installed) with a Nexus 5X.
I don't remember well how I fixed it, but I remember entering in Qualcomm download mode (should be the same EDL mode) and loading a file found after many hours of research in strange forums and sites.
Click to expand...
Click to collapse
Yes of course !
But I revert to stock rom with Mi Flash and I click on Flash all and lock, since the telephone should have been "brand new" it should not have any problems but ...
I have to enter EDL mode, but don't know how to do it since modified fastboot executables does not activate it it just reboot the phone...
Deep flash cable may help but not shure if it works, or I may have to disassemble the device to find EDL pins...
after unlock bootloader type fastboot flashing unlock_critical and flash with miflash tool
LUNARIO said:
after unlock bootloader type fastboot flashing unlock_critical and flash with miflash tool
Click to expand...
Click to collapse
But since I can't activate OEM I can't unlock bootloader....
try this http://www.xiaomitool.com/ not sure if it works on our phone but maybe can unlock the bootloader so you can use miflash
Have you sideloaded the zip? I think it's better to copy the OTA zip to microSD than ADB sideload.
droopeur said:
I have to enter EDL mode, but don't know how to do it since modified fastboot executables does not activate it it just reboot the phone...
Deep flash cable may help but not shure if it works, or I may have to disassemble the device to find EDL pins...
Click to expand...
Click to collapse
There should be only two methods for entering EDL:
1- request authorization in en.miui.com forum. Sometimes the admins accept requests to give an account one EDL flash permission (but I don't know if it works with AndroidOne devices).
2- finding the test point in the phone's motherboard.
Hi guys,
i tried to install this twrp but it doesnt work...
so i searched on internet and i found another article, i tried to check the current partition and install in another way
for first:
fastboot getvar current-slot
after i do this
fastboot boot_b recovery.img
and then
fastboot set_active b
so nothing to do....but right now my MI A2 lite not boot.
i try again to check my partition but this time i have no replay.
i have unlocked bootloader but i cant go to recovery and i cant boot!!
someone can help me please?
I HAVE THE SAME PROBLEM
everything you said is completely simillar to mine. Can someone help us? Or did you already fix it? Please help me i need my phone working.
I have same problem fastboot flash but after that, it started to reboot automatically. The phone was automatically turning off and on. I again did a "clean all and lock" via miflash tool but still now, no result!
I can boot into recovery without having any problem. But when I boo to setup country date....etc, it starts its auto rebooting process,
Any help ?
droopeur said:
But since I can't activate OEM I can't unlock bootloader....
Click to expand...
Click to collapse
Same situation here. I am desperate!! Did you solve it?
Isso resolve
steledama said:
Same situation here. I am desperate!! Did you solve it?
Click to expand...
Click to collapse
gadgetsfarm.com/download-mi-a2-lite-fastboot-rom-v9-6-4-download/[/url]
How to unbrick?
Hey guys. I bricked my Mi2 Lite as well. Is there any step by step way to unbrick?
had the same problem, was stuck in the bootloop even after I flashed img with MiFlash! NOTE: MY BOOTLOADER WAS UNLOCKED!!! (LUCKLY I DID NOT TRIED FLASH ALL AND UNLOCK!)
headed to this thread
Code:
fastboot flashing unlock
fastboot flashing unlock_critical
did not work, I get error saying FAILED
but after i used
Code:
fastboot oem edl
I went to MiFlash and used "Clean all" option (again note DON'T use "Clean all and lock"!!!). It took around 5 minutes to flash and my notif. light blinked whole the time. After it say "Success" I was able to normaly boot the phone again
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Hi, where i can find MI A2 Lite Tool Kit? i open my device and i can put in EDL mode., my computer detect my pone in EDL mode, but i can not know do.
I like bypass FRP, can anybody help me
Thanks.
mr_techno said:
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Click to expand...
Click to collapse
Hi all,
I also had same problem and I just resolve it.
My phone was in bootloop mode after stock rom flashing...
You don't need apply "fastboot oem edl" !
Just be sure your device is unlocked.
Download first stock rom (V9.6.4.0.ODLMIFF Firmware for Mi A2 Lite). If you flash last ROM, it don't work.
Flash it with XiaoMiFlash tool (don't forget to enable "Clean All") in bottom of the tool.
After reboot, you can apply OTA updates.
Enjoy !
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Is your bootloader (still) unlocked and do you have access to fastboot?
Veran125 said:
Is your bootloader (still) unlocked and do you have access to fastboot?
Click to expand...
Click to collapse
Yes, bootloader's still unlocked and i have acces to fastboot.
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
mr_techno said:
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Click to expand...
Click to collapse
Thanks for your magic answer, but i can't find your toolkit, BUT i found this https://forum.xda-developers.com/mi...ol-tool-one-driversunlocktwrpfactory-t3866191. Is it good also ?
You can just get newest fastboot rom, and then flash with Miflash
Veran125 said:
You can just get newest fastboot rom, and then flash with Miflash
Click to expand...
Click to collapse
If it was too simply ... I think i did that already, But fastboot room, what do you mean with that ?
I just want, now, to be sure, can i save my phone ? It's not dead ?
Cause it's a very good phone and i don't want to loose it, really.
Nope, it's not dead, even with locked bootloader it wouldn't be. But now that you've got an unlocked bootloader, it's very easy to restore
I'm more happy so, 5 hours ( no fake really ) i search a solution .... SO
I found a global rom without .bat files in this folder so i got an error with Mi Flash Tool .. Tell me more about your idea
What's the error if I may ask?
Veran125 said:
What's the error if I may ask?
Click to expand...
Click to collapse
Can not found ( don't remember the file name).bat
FamosoFT said:
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Click to expand...
Click to collapse
-Tente isso:
Download this official rom: https://en.miui.com/download-354.html
Download this Mi Flash Tool: http://api.en.miui.com/url/MiFlashTool
*I'm assuming you already have the ADB drivers installed on your PC
*Remember to check the CLEAN ALL option
-If the above method does not work, do the following:
* It will only work if you do not have TWRP installed, if it is with twrp installed, I recommend reinstalling the original recovery *
1-Turn off the device and press (POWER BUTTON + VOLUME UP). At that point, the android doll will appear and spelled 'NO COMMAND'
2-Press only (POWER BUTTON) and click quickly (VOLUME UP BUTTON). In this screen you will see the recovery options, use the volume buttons to go to the WIPE DATA/FACTORY RESET option, confirm with YES and restart the device.
3- Wait patiently for 3/5 minutes.
-If none of this works and you can still access twrp, I recommend you try installing a GSI rom using this method: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-functional-twrp-magisk-pie-gsi-t3900119
I recommend this GSI rom (I'm using this now): https://get.resurrectionremix.com/?dir=gsi (choose 'arm64-ab')
This will give you a working system and make it easier to return to stock.
Hope one of these methods helped!
Hi all,
The problem was my PC i had not the .bat files so it couldn't work ...
Thanks @Bruno_Designer for your message, but i hate RROS but you're solution was good
FamosoFT said:
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Click to expand...
Click to collapse
If u alredy used twrp den u have adb.
U need mi flash tool.
Download any one of the full fastboot roms for Mi A2 Lie below:
9.6.4.0: https://xiaomifirmware.com/download/10399/
9.6.10.0: https://xiaomifirmware.com/download/10867/
10.0.3: https://xiaomifirmware.com/download/11586/
So to revive ur fone, u do dis. Dis was how i did mine.
1. After downloading a rom of choice, u extract on ur pc using winrar, 7zip or izarc. U basically open the archive using any of these software n copy out the folder contained. The name usually starts with "daisy global ...."
2. U open the extracted rom folder. U will see a bunch of files including "flash_all.bat" etc and a folder called "images".
3. Click on the address bar of d rom folder and copy the address. Den open "mi flash tool" and paste d copied address in the mi flash tool address bar n click on refresh.
4. Boot ur phone to fastboot mode, using "power" & "volume down" buttons together.
connect d phone to ur pc via usb cable.
5. Open ur adb folder and open the adb command window.
Type in the following, one after the other n click enter:
" fastboot devices " dis to confirm the adb connection
" fastboot oem edl " dis to enter edl mode. Ur fone led starts blinking at 1sec intervals.
6. Back to mi flash tool, u click on "refresh". After a second ur fone should be seen as a COM port "COM 10"
7. At d bottom right, u shd find 3 options. Selct "clean all". This shd leave ur bootloader unlocked after the process.
8. U click on "flash" button at the top right. All things going well, within 10 mins the process shd be done and u will see "green" indicator with "success".
9. Hold ur fone n press d power botton for 10 secs. Then ur fone shd power up. Give ur fone exactly about 5 mins to come up "look at the clock & dnt assume"
Dis is an edit of others tutorials. But this is exactly how it worked for me. As long as u use any of the 3 roms i linked u.
Unless i use edl mode, it jus doesnt work for me.
Good luck. Leta know how it goes. And pls click thanks if i helped u.
Problem solved
Thread closed at OP request
Hello,
I was on stable global indian 10.4.4 (INMX), unlocked, rooted, twrp.
Then got notification of update, downloaded update, reboot (as prompted by updater app), update failed, error 7.
Rebooted phone to system. Updater said to download full rom now which i did,, and reboot again, same error.
I thought twrp might b incompatible with update so i flashed stock recovery n repeated all above.
Now phone stuck at bootloop and does not boot into recovery or fastboot by pressing vol+/- and power,, also pressing all three together is not working.
PC doesn't detect phone as it keeps rebooting in loop.
Any way to force boot in fastboot??
beachfl said:
When it very first shuts down (the redmi logo first disappears and it goes black), before it starts to boot up again, press and hold Volume Down and Power until it takes you to fastboot.
Click to expand...
Click to collapse
Cannt go to fastboot bro by this way
majidmjmn said:
I have exactly the same problem with my redmi note 8 pro after trying to flash another twrp on my rooted unlocked phone it juat shows redmi and then goes off,no recovery and no fastboot available!
I don't know about adb shell commands would you Please explain the instructions and procedure in more details
Tnx
Click to expand...
Click to collapse
same problem bro. let me know how you solve this problem please
yeswe61155 said:
Cannt go to fastboot bro by this way
Click to expand...
Click to collapse
If it is bootlooped... you can get to fastboot... keep trying... you just have to catch it at the right time.
Letting the battery run out, then charge and try to start in quick start
danyv77 said:
Letting the battery run out, then charge and try to start in quick start
Click to expand...
Click to collapse
Thank you. Will do that and update.
danyv77 said:
Letting the battery run out, then charge and try to start in quick start
Click to expand...
Click to collapse
Update : didn't work. Still went into same. Tried 4-5 times.
I think you have to open the back cover, disconnect the battery connector, connect it to computer, hopefully it will get detected as mediatek then you can follow this guide
danyv77 said:
Letting the battery run out, then charge and try to start in quick start
Click to expand...
Click to collapse
gugelgigel said:
I think you have to open the back cover, disconnect the battery connector, connect it to computer, hopefully it will get detected as mediatek then you can follow this guide
Click to expand...
Click to collapse
Unfortunately that didn't work either. Sent to Mi Service center, they tried EDL by opening back cover,, didn't work. Now sent phone to xiaomi by service center, i'll get either this one repaired or new one in a week. (as per Mi)
Surprisingly i wasn't the only one or first one to report this. There have been similar incidences earlier as well and even the ones that were on stock everything and locked bootloader. Apparently the new update 11.0.1 is troublesome. - as reported by Mi executive.
Here's my solution
I've got my brand new Redmi Note 8 Pro and just unlocked it yesterday. Today I install the Global ROM and it just work fine BUT I when further : root and install magisk... Then I got a recovery boot loop, I try to solve the issue by flashing another TWRP and then BAM no more fastboot and no more recovery, really bricked hard.
I was using this custom TWRP mention here: https://forum.xda-developers.com/re...de-unlock-bootloader-flash-twrp-root-t3995919
Please share this solution everywhere because that really solve my issue:
(1) Flash recovery using adb YESSSSS
Source: https://blog.matt.wf/flash-your-recovery-image-via-adb-shell-on-android/
Enable your USB debugging bridge in switch via adb to the terminal:
./adb shell
Then you should be able to find your recovery partion with:
DEV=$(ls /dev/block/platform/*/by-name/recovery); echo $DEV
that should output something like this:
/dev/block/platform/7824900.sdhci/by-name/recovery
If this is the case you only have to put the recovery.img on your sd-card or the internal storage and you are one command from flashing:
dd of=$DEV if=/external_sd/recovery.img
Thats it! No binaries you have to install. No ****ty fastboot udev rules :S
You can enter into your new recovery system with:
./adb reboot recovery
2) Good now I was able to be back in the LR Team TWRP. From there I removed root and thus magisk, completely disabled DM Verify (because this custom TWRP install everything it can also remove it) and wonder happen, I was able to boot my phone and fastboot is back !
pmesolution.ca said:
I've got my brand new Redmi Note 8 Pro and just unlocked it yesterday. Today I install the Global ROM and it just work fine BUT I when further : root and install magisk... Then I got a recovery boot loop, I try to solve the issue by flashing another TWRP and then BAM no more fastboot and no more recovery, really bricked hard.
I was using this custom TWRP mention here: https://forum.xda-developers.com/re...de-unlock-bootloader-flash-twrp-root-t3995919
Please share this solution everywhere because that really solve my issue:
(1) Flash recovery using adb YESSSSS
Source: https://blog.matt.wf/flash-your-recovery-image-via-adb-shell-on-android/
Enable your USB debugging bridge in switch via adb to the terminal:
./adb shell
Then you should be able to find your recovery partion with:
DEV=$(ls /dev/block/platform/*/by-name/recovery); echo $DEV
that should output something like this:
/dev/block/platform/7824900.sdhci/by-name/recovery
If this is the case you only have to put the recovery.img on your sd-card or the internal storage and you are one command from flashing:
dd of=$DEV if=/external_sd/recovery.img
Thats it! No binaries you have to install. No ****ty fastboot udev rules :S
You can enter into your new recovery system with:
./adb reboot recovery
2) Good now I was able to be back in the LR Team TWRP. From there I removed root and thus magisk, completely disabled DM Verify (because this custom TWRP install everything it can also remove it) and wonder happen, I was able to boot my phone and fastboot is back !
Click to expand...
Click to collapse
you should share this information in the other posts, to see if it works for others
djzero86 said:
you should share this information in the other posts, to see if it works for others
Click to expand...
Click to collapse
Yes I did share it to the other post which I followed the tutorial But I think my method will allow anyone having access to adb and not Fastboot to flash and boot a new TWRP image which could allow them to flash once again a ROM from the Recovery or modify the source code an fix their issue.
Redmi note 8 pro no recovery and fastboot
I have exactly the same problem with my redmi note 8 pro after trying to flash another twrp on my rooted unlocked phone it juat shows redmi and then goes off,no recovery and no fastboot available!
I don't know about adb shell commands would you Please explain the instructions and procedure in more details
Tnx
My phone keeps restart
I have the same issiue and my phone keeps restart i can't give any command to solve this proplem please help me
Similar issue,
I get the Redmi splash screen, and then it reboot after about 3 seconds. During the reboot cycle, which takes another few seconds - thats the only time my PC can detect the phone.
So Smart Phone Flash Tool can detect it for those few seconds, starts download but then timeouts after 2 minutes (status protocol err). I guess it loses connection.
Phone can't boot into recovery or fastboot. Is it hardbricked/beyond repair ?
More details:
https://forum.xda-developers.com/showpost.php?p=82467553&postcount=16
poster74 said:
Similar issue,
I get the Redmi splash screen, and then it reboot after about 3 seconds. During the reboot cycle, which takes another few seconds - thats the only time my PC can detect the phone.
So Smart Phone Flash Tool can detect it for those few seconds, starts download but then timeouts after 2 minutes (status protocol err). I guess it loses connection.
Phone can't boot into recovery or fastboot. Is it hardbricked/beyond repair ?
More details:
https://forum.xda-developers.com/showpost.php?p=82467553&postcount=16
Click to expand...
Click to collapse
How you brick your phone?
Flash without autorized account
Does any of you guys use the method that mentined in this site bellow
Just type how to flash redmi note 8 pro without authorized accound in google and clike on link proveded by romprovider..(link was deleted by xda so i coulden't share it)
Use it and let me know if it works for you...
Nasser Nody said:
I have the same issiue and my phone keeps restart i can't give any command to solve this proplem please help me
Click to expand...
Click to collapse
use the method that mentined in this site bellow
and let me know if it works for you...
just type how to flash redmi note 8 pro without authorized accound in google and clike on link proveded by romprovider..(link was deleted by xda so i coulden't share it)
majidmjmn said:
I have exactly the same problem with my redmi note 8 pro after trying to flash another twrp on my rooted unlocked phone it juat shows redmi and then goes off,no recovery and no fastboot available!
I don't know about adb shell commands would you Please explain the instructions and procedure in more details
Tnx
Click to expand...
Click to collapse
Now you all already solved this problem? plz mention me plz plz
yeswe61155 said:
Now you all already solved this problem? plz mention me plz plz
Click to expand...
Click to collapse
When it very first shuts down (the redmi logo first disappears and it goes black), before it starts to boot up again, press and hold Volume Down and Power until it takes you to fastboot.
Hi everyone,
I got Chinese version Note 8 Pro from Mi official store and unlocked bootloader after 7 days.
I downloaded Global MIUI 11 ROM via official miui download link, "ifelixit+FLASHER+TOOLKIT+Begonia" and installed ADB drivers etc.
After run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1, it installed recovery, then I'm able to boot into TWRP, and then I installed global rom from there, meanwhile wiped everything in it as I don't need China version rom. Phone reboot well and new global rom works great.
Then I try to install Magisk, I noticed recovery seems be restored to original, no worries, I re-run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1 to install TWRP again. Whatever I did, I cannot get TWRP back, when I hold power/+, it keep blank and will restart, but if I don't hold them, it can get into the system.
My first question is: 1. At this stage, is recovery crash already?
I didn't think too much and I get into system, install Magisk manager, let it to patch boot.img, I then use following command in fastboot mode
fastboot flash boot boot_patch.img
After I finished, I noticed maybe I can do TWRP here as well, then I also input
fastboot flash boot TWRP.img
After reboot, the phone is dead....No fastboot, NO recovery, no vibration. exactly described as here
[UNBRICK - stuck on DA mode / Authorised Service Account required]
https://forum.xda-developers.com/re...ide-unbrick-stuck-da-mode-authorised-t4000433
I re-think what I did, my question is
2. Will boot_patch.img Magisk patched not suitable for China phone with global rom?
3. Is fastboot dead because I installed recovery into boot via fastboot flash boot TWRP.img?
Thanks for your time and appreciated for any knowledgeable reply.
Flash your original boot.img for your original firmware or just download the xiaomitoolV2 and flash it that way. I see a lot of people flashing stock firmware using TWRP. Hence the v2 tool only works if your phone still fully boots. NOTE do not flash stock FW or UPDATE using TWRP you will brick the device. Chances are your FW didn't flash and just ADB CMD fatsboot flash boot ( then set BOOT.IMG ) in the CMD and get the devices booting again. Then use the V2 tool to flash the global firmware get that to stick then use the ifelixit tool to flash recovery once in recovery go advanced file mgr system-root at the bottom delete boot P then close AVB 2.0 then hit the install root button SU - magisk 19.4 will be installed. no need to wipe or format the phone ( DON'T FORGET TO WIPE CACHE & DALVIC.
---------- Post added at 09:00 AM ---------- Previous post was at 08:52 AM ----------
fastjohnson said:
Flash your original boot.img for your original firmware or just download the xiaomitoolV2 and flash it that way. I see a lot of people flashing stock firmware using TWRP. Hence the v2 tool only works if your phone still fully boots. NOTE do not flash stock FW or UPDATE using TWRP you will brick the device. Chances are your FW didn't flash and just ADB CMD fatsboot flash boot ( then set BOOT.IMG ) in the CMD and get the devices booting again. Then use the V2 tool to flash the global firmware get that to stick then use the ifelixit tool to flash recovery once in recovery go advanced file mgr system-root at the bottom delete boot P then close AVB 2.0 then hit the install root button SU - magisk 19.4 will be installed. no need to wipe or format the phone ( DON'T FORGET TO WIPE CACHE & DALVIC.
Click to expand...
Click to collapse
Remove the back off the phone and disconnect the battery for 5 min just to be sure hold the power button to clear all power left in the phone. Main objective is to get useage again fastboot or recovery. If you get recovery sideload your boot img and flash it on the next reboot twrp will be overridden.
fastjohnson said:
Flash your original boot.img for your original firmware or just download the xiaomitoolV2 and flash it that way. I see a lot of people flashing stock firmware using TWRP. Hence the v2 tool only works if your phone still fully boots. NOTE do not flash stock FW or UPDATE using TWRP you will brick the device. Chances are your FW didn't flash and just ADB CMD fatsboot flash boot ( then set BOOT.IMG ) in the CMD and get the devices booting again. Then use the V2 tool to flash the global firmware get that to stick then use the ifelixit tool to flash recovery once in recovery go advanced file mgr system-root at the bottom delete boot P then close AVB 2.0 then hit the install root button SU - magisk 19.4 will be installed. no need to wipe or format the phone ( DON'T FORGET TO WIPE CACHE & DALVIC.
---------- Post added at 09:00 AM ---------- Previous post was at 08:52 AM ----------
Remove the back off the phone and disconnect the battery for 5 min just to be sure hold the power button to clear all power left in the phone. Main objective is to get useage again fastboot or recovery. If you get recovery sideload your boot img and flash it on the next reboot twrp will be overridden.
Click to expand...
Click to collapse
Thanks. Currently my phone doesn't have reboot, no recovery, purely blank on screen, only power led shows when connecting via USB. In this situation, must open back case to disconnect the battery? I heard about it's free to go back to mi store and re flash it back. To open back case it won't have warranty anymore. Struggling....
idog8818 said:
Thanks. Currently my phone doesn't have reboot, no recovery, purely blank on screen, only power led shows when connecting via USB. In this situation, must open back case to disconnect the battery? I heard about it's free to go back to mi store and re flash it back. To open back case it won't have warranty anymore. Struggling....
Click to expand...
Click to collapse
I also have two bricked phones note 8 pro with no recovery, only white led shows when connecting via USB.
First bricked with TWRP and then flashed with false boot.img, second is bricked with OrangeFox-Unofficial-begonia.img.
I was open back case and disconnect the battery, stay 3 days but nothing working to reboot to fastboot or recovery.
Also I have already tried with short circuit test point to EDL mode but phone is still dead. I have downloaded many xiaomi and other tools and firmwares, installed all available usb drivers and reading all internet forums.
Please help!
Same
Hello,
I think I did the same error, flashing a wrong boot.img...
I tell you if I manage to do something.
hello, the solution to the problem is the battery is completely discharged until the device stops responding to any attempts to start using the key combination. unless you tried to flash a fastboot partition. the solution works after hard bricking after trying to upload incompatible twrp or other rom (I uploaded Chinese twrp on eu rom). ok, we start:
1. holding vol - and power plug in the usb cable (the buttons are released when the notification LED changes from very bright for a moment to slightly dimmed)
2. you will see the long unseen battery symbol with a lightning inside (i.e. a completely discharged battery, the charge status will begin to show the percentage)
3. Turn off the USB cable at 3 percent.
4. now an important thing - you need to start the phone only trying to enter the fastboot mode otherwise the phone will start to boot the system and get stuck again and you will have to unload it again
5. you will finally enter the fastboot , using only the software from xiaomi or xiaomi flash and fastboot rom
I succeeded after 2 weeks of waiting for it to discharge ...
I copied this tutorial from this partner klocek80 , and it worked perfectly
https://forum.xda-developers.com/showpost.php?p=81191977&postcount=72
danyv77 said:
hello, the solution to the problem is the battery is completely discharged until the device stops responding to any attempts to start using the key combination. unless you tried to flash a fastboot partition. the solution works after hard bricking after trying to upload incompatible twrp or other rom (I uploaded Chinese twrp on eu rom). ok, we start:
1. holding vol - and power plug in the usb cable (the buttons are released when the notification LED changes from very bright for a moment to slightly dimmed)
2. you will see the long unseen battery symbol with a lightning inside (i.e. a completely discharged battery, the charge status will begin to show the percentage)
3. Turn off the USB cable at 3 percent.
4. now an important thing - you need to start the phone only trying to enter the fastboot mode otherwise the phone will start to boot the system and get stuck again and you will have to unload it again
5. you will finally enter the fastboot , using only the software from xiaomi or xiaomi flash and fastboot rom
I succeeded after 2 weeks of waiting for it to discharge ...
I copied this tutorial from this partner klocek80 , and it worked perfectly
https://forum.xda-developers.com/showpost.php?p=81191977&postcount=72
Click to expand...
Click to collapse
This only helps when boot image is not damaged.
Duchan_xda said:
I also have two bricked phones note 8 pro with no recovery, only white led shows when connecting via USB.
First bricked with TWRP and then flashed with false boot.img, second is bricked with OrangeFox-Unofficial-begonia.img.
I was open back case and disconnect the battery, stay 3 days but nothing working to reboot to fastboot or recovery.
Also I have already tried with short circuit test point to EDL mode but phone is still dead. I have downloaded many xiaomi and other tools and firmwares, installed all available usb drivers and reading all internet forums.
Please help!
Click to expand...
Click to collapse
I'm with you. The boot image has error and when MTK realize it has something wrong it will NOT enter into fastboot. The only way to fix this is too use SP Flash Tool for deep flash. Mi store uses this way as well to fix the issue.
Try this:
https://c.mi.com/thread-2173190-1-0.html
ppthom said:
Try this:
https://c.mi.com/thread-2173190-1-0.html
Click to expand...
Click to collapse
This does NOT work. Please don't waste time on it.
:good:Thanks for clarifying this. Back to square one ...
idog8818 said:
Hi everyone,
I got Chinese version Note 8 Pro from Mi official store and unlocked bootloader after 7 days.
I downloaded Global MIUI 11 ROM via official miui download link, "ifelixit+FLASHER+TOOLKIT+Begonia" and installed ADB drivers etc.
After run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1, it installed recovery, then I'm able to boot into TWRP, and then I installed global rom from there, meanwhile wiped everything in it as I don't need China version rom. Phone reboot well and new global rom works great.
Then I try to install Magisk, I noticed recovery seems be restored to original, no worries, I re-run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1 to install TWRP again. Whatever I did, I cannot get TWRP back, when I hold power/+, it keep blank and will restart, but if I don't hold them, it can get into the system.
My first question is: 1. At this stage, is recovery crash already?
I didn't think too much and I get into system, install Magisk manager, let it to patch boot.img, I then use following command in fastboot mode
fastboot flash boot boot_patch.img
After I finished, I noticed maybe I can do TWRP here as well, then I also input
fastboot flash boot TWRP.img
After reboot, the phone is dead....No fastboot, NO recovery, no vibration. exactly described as here
[UNBRICK - stuck on DA mode / Authorised Service Account required]
https://forum.xda-developers.com/re...ide-unbrick-stuck-da-mode-authorised-t4000433
I re-think what I did, my question is
2. Will boot_patch.img Magisk patched not suitable for China phone with global rom?
3. Is fastboot dead because I installed recovery into boot via fastboot flash boot TWRP.img?
Thanks for your time and appreciated for any knowledgeable reply.
Click to expand...
Click to collapse
Are you recover your phone? I'm still waiting one year...
Duchan_xda said:
Are you recover your phone? I'm still waiting one year...
Click to expand...
Click to collapse
I didn`t find any background on your issue, just something like you actually have a device with white led light blinking.
I read this thread before (yes, some weeks ago) this happened to me yesterday https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-unlock-note-8-pro-authorised-t4168805 the short story is that I were trying to return to Miui 12 after of using some custom ROMs and something in the flashing process failed I mean it was an incomplete flashing and I assumed that most probably just the bootloader partition was damaged. The whole important fact in this situation is that you have yet available fastboot mode but like the splash partition with its image was gone I couldn `t see it and I were anyway in fastboot mode so I could flash the proper files to "unbrik" it. (my device is unlocked)
What you should try is connect it with PC while you`re pressing the volume down, enter to adb/fastboot environment and type fastboot commands to see if device is recogniced, you don`t have to hear constant reboot sounds or in this case press the power button simulating that you are powering off device.