Develop Bugs

Need Help For switching rom from china to global

hi devs
i flashed accidentially Chinese recovery rom on my whyred now i m unable to switch from Chinese to global version as i tried every method fastboot,recovery,qfil,mi flash and edl mode i mean every possible way but all in vain as every method ended with error and my fastboot command is locked.
so what can i do please suggest me
it's Chinese miui 11

guys please help me i m frustrated tried every available method on internet downloaded tons of file.

aliasgertaj said:
guys please help me i m frustrated tried every available method on internet downloaded tons of file.
Click to expand...
Click to collapse
What you are trying to do? Just switch from Chinese to Global? or your device is bricked now?
What did happen after that you flashed the Chinese recovery ROM?
What modes do you have available?
Did you unlock bootloader previously?

SubwayChamp said:
What you are trying to do? Just switch from Chinese to Global? or your device is bricked now?
What did happen after that you flashed the Chinese recovery ROM?
What modes do you have available?
Did you unlock bootloader previously?
Click to expand...
Click to collapse
i m not bricked as my device is working fine
but now no fastboot command working i m not able to flash custom recovery
i tried fastboot method , used miflash method every miflash from old to newest , qfil edl mode method with miflash and qualcomm flash tool
i m just able to switch between china stable n developer rom
if i m able to unlock ma fastboot command then i can flash atleast custom recovery .
kindly help me as all method ended up every time with diffrent error.

aliasgertaj said:
i m not bricked as my device is working fine
but now no fastboot command working i m not able to flash custom recovery
i tried fastboot method , used miflash method every miflash from old to newest , qfil edl mode method with miflash and qualcomm flash tool
i m just able to switch between china stable n developer rom
if i m able to unlock ma fastboot command then i can flash atleast custom recovery .
kindly help me as all method ended up every time with diffrent error.
Click to expand...
Click to collapse
Fastboot flashing commands won't work if you have bootloader locked.
Did you unlock bootloader previously and probably get locked again?
Did you enable all the proper options on Developer section, i.e. USB debugging and check if device is recogniced on adb commands?
What do you get with "fastboot getvar all"?

subwaychamp said:
fastboot flashing commands won't work if you have bootloader locked.
Did you unlock bootloader previously and probably get locked again?
Did you enable all the proper options on developer section, i.e. Usb debugging and check if device is recogniced on adb commands?
What do you get with "fastboot getvar all"?
Click to expand...
Click to collapse
thanks a lot dude i m on unlock boot loader .
But bootloader some time works means sometimes it shows my device name after available device command it shows only ???????? Fastboot devices
i tried all way possible but none of them worked.
And i m unable to switch from china to global.
Only i can do is switch between china stable to developer.

i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>

aliasgertaj said:
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
Click to expand...
Click to collapse
And you said you enabled USB debuging?!? you didn't. First enable it under development tools.
MAKE SURE YOUR USING RIGHT ADB/FASTBOOT TOOLS AND DRIVERS.
After 'adb reboot bootloader' use 'fastboot devices'. You can change usb cable and if you still get errors try using usb hub.
If all above fails than try it on WIN7 PC.

aliasgertaj said:
thanks a lot dude i m on unlock boot loader .
But bootloader some time works means sometimes it shows my device name after available device command it shows only ???????? Fastboot devices
i tried all way possible but none of them worked.
And i m unable to switch from china to global.
Only i can do is switch between china stable to developer.
Click to expand...
Click to collapse
aliasgertaj said:
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
Click to expand...
Click to collapse
I think you are not properly booted to the proper state while you're trying certain commands. Just to be clear; adb works while your device is power on and fastboot commands will work only while your device is in fastboot mode not while on adb mode. A way to be sure that you are doing properly is enabling USB debugging first but while connected device with PC, a prompt will appear from device screen and then tap on "always allow", then you have to type "adb devices" and follow step by step, if device is recognized you can go to the next step with "adb reboot bootloader" then in fastboot you have to see the bunny otherwise is not properly in fastboot mode, then you can follow with "fastboot devices" and so on, keep in mind that any command will work until device is properly recognized.

SubwayChamp said:
I think you are not properly booted to the proper state while you're trying certain commands. Just to be clear; adb works while your device is power on and fastboot commands will work only while your device is in fastboot mode not while on adb mode. A way to be sure that you are doing properly is enabling USB debugging first but while connected device with PC, a prompt will appear from device screen and then tap on "always allow", then you have to type "adb devices" and follow step by step, if device is recognized you can go to the next step with "adb reboot bootloader" then in fastboot you have to see the bunny otherwise is not properly in fastboot mode, then you can follow with "fastboot devices" and so on, keep in mind that any command will work until device is properly recognized.
Click to expand...
Click to collapse
thanks bro
yesterday i used xiaomitool v2 as it reboot automatically device in fastboot mode but as i said after in fastboot mode it doesn't boot in adb mode.
and what is proper method to open fastboot mode i m doing it by holding power and volume down button.

drnightshadow said:
And you said you enabled USB debuging?!? you didn't. First enable it under development tools.
MAKE SURE YOUR USING RIGHT ADB/FASTBOOT TOOLS AND DRIVERS.
After 'adb reboot bootloader' use 'fastboot devices'. You can change usb cable and if you still get errors try using usb hub.
If all above fails than try it on WIN7 PC.
Click to expand...
Click to collapse
thanks for response bro
i did it under developer option and trusted my computer connection also and install adb fastboot devices many time changed cable and port but nothing happen. i tried fastboot files of china stable rom but it also doesn't worked

aliasgertaj said:
thanks bro
yesterday i used xiaomitool v2 as it reboot automatically device in fastboot mode but as i said after in fastboot mode it doesn't boot in adb mode.
and what is proper method to open fastboot mode i m doing it by holding power and volume down button.
Click to expand...
Click to collapse
Just trying to determine what your words exactly mean when you say "after in fastboot mode it doesn't boot in adb mode." ... without entering in more technical insights adb works when device is on, no sense to boot to fastboot to try to boot to adb after that (?)
If you can boot to fastboot what you have to try firstly is unlock bootloader or be sure that is already unlocked using
Code:
fastboot oem device-info
if your device is or get unlocked then you can try to flash or just boot to a custom recovery but if you can't determine until now if your device is really unlocked then you couldn't go further.
The hardware method to enter to fastboot is from a device off; pressing both pwr and vol down buttons but if the bunny is not displayed probably you didn't really get fastboot mode.

SubwayChamp said:
Just trying to determine what your words exactly mean when you say "after in fastboot mode it doesn't boot in adb mode." ... without entering in more technical insights adb works when device is on, no sense to boot to fastboot to try to boot to adb after that (?)
If you can boot to fastboot what you have to try firstly is unlock bootloader or be sure that is already unlocked using
Code:
fastboot oem device-info
if your device is or get unlocked then you can try to flash or just boot to a custom recovery but if you can't determine until now if your device is really unlocked then you couldn't go further.
The hardware method to enter to fastboot is from a device off; pressing both pwr and vol down buttons but if the bunny is not displayed probably you didn't really get fastboot mode.
Click to expand...
Click to collapse
i m frustrated now tried all the thing tried official flash tool official build but even official build by miflash official latest tool unable to flash image

i bought my device to official xiaomi service center they told it will be done in an hour but after couple of hour they returned my phone that it cant be updated.??????
shame on xiaomi that they implemented a method that they themselves also don't know how to revert it.

aliasgertaj said:
i bought my device to official xiaomi service center they told it will be done in an hour but after couple of hour they returned my phone that it cant be updated.??????
shame on xiaomi that they implemented a method that they themselves also don't know how to revert it.
Click to expand...
Click to collapse
Do yo use WIN10? Find PC with Win7... and install adb/fastboot app and drivers. Than try..
Is your system working now?
Just unlock your bootloader and install OrangeFox recovery than you can flash whatever you need.
Problem solved.

drnightshadow said:
Do yo use WIN10? Find PC with Win7... and install adb/fastboot app and drivers. Than try..
Is your system working now?
Just unlock your bootloader and install OrangeFox recovery than you can flash whatever you need.
Problem solved.
Click to expand...
Click to collapse
ok bro i will try today with another pc and update you

aliasgertaj said:
ok bro i will try today with another pc and update you
Click to expand...
Click to collapse
thanks installed twrp on other pc running on windows 7 but now internal storage goes 0mb unable to mount system

aliasgertaj said:
thanks installed twrp on other pc running on windows 7 but now internal storage goes 0mb unable to mount system
Click to expand...
Click to collapse
Wtf .. what's wrong with you.. you did everything we said wrong... Where and when did I told you to install TWRP????
I'm done with you...
Good luck with china ROM.
Ignorance is a bliss.

drnightshadow said:
Wtf .. what's wrong with you.. you did everything we said wrong... Where and when did I told you to install TWRP????
I'm done with you...
Good luck with china ROM.
Ignorance is a bliss.
Click to expand...
Click to collapse
thanks dude i installed twrp wipe my internal storage there is some error then some tricks goes perfect as i supposed and woohaa i installed masik port edition and now my phone works fine.

aliasgertaj said:
thanks dude i installed twrp wipe my internal storage there is some error then some tricks goes perfect as i supposed and woohaa i installed masik port edition and now my phone works fine.
Click to expand...
Click to collapse
TWRP can't bypass encryption, when you have no access to read data (0mb) then you have to format it, to avoid that is always recommended use OrangeFox, just for future reference, if you understand that you can flash OrangeFox through TWRP for better experience.
Also you can use this tool to help you to automate some stuff https://github.com/Szaki/XiaomiADBFastbootTools

"This MIUI version can't be installed on this device"

Bricked with a locked bootloader - "This MIUI version can't be installed on this device"
I can get to "adb sideload" and fastboot, but the bootloader is locked
Can I unlock the bootloader with EDL? Can I access EDL with an EDL-cable? Or do I need to open the phone and short the EDL pins?
Can I recover the phone from a Linux computer? Or do I need Windoze?
Is it even possible to un-screw this phone?
Any help appreciated.

go vegan said:
Bricked with a locked bootloader - "This MIUI version can't be installed on this device"
I can get to "adb sideload" and fastboot, but the bootloader is locked
Can I unlock the bootloader with EDL? Can I access EDL with an EDL-cable? Or do I need to open the phone and short the EDL pins?
Can I recover the phone from a Linux computer? Or do I need Windoze?
Is it even possible to un-screw this phone?
Any help appreciated.
Click to expand...
Click to collapse
how did you do this?

Redmi 4A abdal said:
how did you do this?
Click to expand...
Click to collapse
1- Checking if this problem is still a problem with custom ROMs; it is, and thus I believe it to be a hardware fault.
2- Done testing, re-install stock stock ROM, lock bootloader via adb; bricked phone.

go vegan said:
1- Checking if this problem is still a problem with custom ROMs; it is, and thus I believe it to be a hardware fault.
2- Done testing, re-install stock stock ROM, lock bootloader via adb; bricked phone.
Click to expand...
Click to collapse
ok, you can run edl mode but its no good for you, its already locked by xiaomi, ( go ing to fastboot mode and give commands something like this " fastboot boot edl")
* do you see padlock lock sign when you go to fastboot mode
* try to flash vbmeta in fastboot mode
* try again to flash correct version miui fastboot rom with mi flashing tool with out selecting lock bootloader

I can get to fastboot by holding power+vol-down. There's no lock icon.
On Ubuntu, I don't think fastboot is compiled to support rebooting into edl. I tried editing the source, and I'm not sure if I did it right, but the binary I built did not boot the phone into edl.
Using these commands:
Code:
fastboot flash vbmeta /tmp/platform-tools/vbmeta.img
Code:
fastboot --disable-verity flash vbmeta /tmp/platform-tools/vbmeta.img
Code:
fastboot --disable-verity --disable-verification flash vbmeta /tmp/platform-tools/vbmeta.img
They all give the same result:
Code:
target reported max download size of 804274176 bytes
sending 'vbmeta' (4 KB)...
OKAY [ 0.006s]
writing 'vbmeta'...
FAILED (remote: Flashing is not allowed in Lock State)
finished. total time: 0.007s

go vegan said:
I can get to fastboot by holding power+vol-down. There's no lock icon.
On Ubuntu, I don't think fastboot is compiled to support rebooting into edl. I tried editing the source, and I'm not sure if I did it right, but the binary I built did not boot the phone into edl.
Using these commands:
Code:
fastboot flash vbmeta /tmp/platform-tools/vbmeta.img
Code:
fastboot --disable-verity flash vbmeta /tmp/platform-tools/vbmeta.img
Code:
fastboot --disable-verity --disable-verification flash vbmeta /tmp/platform-tools/vbmeta.img
They all give the same result:
Code:
target reported max download size of 804274176 bytes
sending 'vbmeta' (4 KB)...
OKAY [ 0.006s]
writing 'vbmeta'...
FAILED (remote: Flashing is not allowed in Lock State)
finished. total time: 0.007s
Click to expand...
Click to collapse
Try to unlock bootloader using cmd and then vbmeta

T.Y.M.SAI said:
Try to unlock bootloader using cmd and then vbmeta
Click to expand...
Click to collapse
I'm not sure what that means.

go vegan said:
I'm not sure what that means.
Click to expand...
Click to collapse
There are 2 ways to unlock bootloader
1. Official way using Mi flash tool
2. Unofficial way using cmd
There are lots of videos on how to unlock bootloader using cmd go and try them
Most important is to keep your phone charged

T.Y.M.SAI said:
1. Official way using Mi flash tool
2. Unofficial way using cmd
Click to expand...
Click to collapse
1- That requires access to a working phone.
2- All I'm finding is instructions for how to type "fastboot oem unlock" on a Windoze computer.

go vegan said:
1- That requires access to a working phone.
2- All I'm finding is instructions for how to type "fastboot oem unlock" on a Windoze computer.
Click to expand...
Click to collapse
Did you found a way to fix the phone or unlock bootloader?

You have 2 ways to get out of this situation.
1. Try to unlock the bootloader with the Mi account you used last time.
2. If couldn't unlock, then switch to EDL mode. Use a no auth programmer to flash the correct variant fastboot ROM and the device should boots up. Then add account again and wait for 168 hours for unlocking.
Since we've got no auth programmer for Sm6125 we could use EDL mode freely.

Hi there @go vegan , have you already fix your phone again? because i also got the same situation on my redmi 6. or is there anybody who can help? thanks

Hi all add me to the list with a k20pro.
The device was unlocked at the start, i got MIUI 12.5 global and flashed with miflashtool.
but wipe and lock was active.
now the phone comes up to the recovery menu and says the miui version is not for this device.
When I try to flash to another version, miflashtool says the device is locked,
when I try to unlock while using the account the device is registered in, miunlock says go to settings >developer options> mi unlock status.
Gave it to a repair shop for 1.5 months and nothing. I live in Iran so no authorized service centers here.
I have access to fast boot mode and recovery.
I tried xiaomitoll V2 which had a specific question asking if my device would show This MIUI version can't be installed on this device in phone is bricked option. It goes to get china official Rom but then errors.
I'm a noob here so any help would be great, tnx.

I have encountered the same problem a few hours ago with my beloved Redmi K20 Pro. My heart became gloomy thinking that I have no way left other than having to take to an authorized service centre where they will rip off the back cover. But then I stumbled upon this simple solution that took me a minute or two. This is how I solved it:
Entered the fastboot mode
Connected the phone to my laptop using the USB cable
Opened the official Mi Unlock Tool and logged in with my Mi account, and
Clicked on the beautiful UNLOCK button!
Boom! The phone is back to its vibrant life! I'm just happy again!

when I try to unlock while using the account the device is registered in, miunlock says go to settings >developer options> mi unlock status.

TECHtacian said:
I have encountered the same problem a few hours ago with my beloved Redmi K20 Pro. My heart became gloomy thinking that I have no way left other than having to take to an authorized service centre where they will rip off the back cover. But then I stumbled upon this simple solution that took me a minute or two. This is how I solved it:
Entered the fastboot mode
Connected the phone to my laptop using the USB cable
Opened the official Mi Unlock Tool and logged in with my Mi account, and
Clicked on the beautiful UNLOCK button!
Boom! The phone is back to its vibrant life! I'm just happy again!
Click to expand...
Click to collapse
Hi! Where can I download Mi Unlock Tool?

UnDevelopedDeveloper21 said:
Hi! Where can I download Mi Unlock Tool?
Click to expand...
Click to collapse
Apply for permissions to unlock Mi devices
en.miui.com

The solution to the problem is simple.
into fast boot mode,
Run unlock again!! Obviously it's locked. When unlocking is executed,
the same screen may appear again. Please do a reboot. You will definitely see the MIUI installation screen.

Device: Redmi note 7S
I found a solution and it worked for me:
1.Download the bat file and execute in your windows pc : https://drive.google.com/file/d/1NqPotx06yRuhPsOdEAdS4JNsk7qWWchF/view
2. After that use the MI unlocker tool to unlock the device.
3, Use mi flasher to flash the Rom.
After the hours of research in the internet i found the solution.
Thanks

Shiva5558 said:
Device: Redmi note 7S
I found a solution and it worked for me:
1.Download the bat file and execute in your windows pc : https://drive.google.com/file/d/1NqPotx06yRuhPsOdEAdS4JNsk7qWWchF/view
2. After that use the MI unlocker tool to unlock the device.
3, Use mi flasher to flash the Rom.
After the hours of research in the internet i found the solution.
Thanks
Click to expand...
Click to collapse
What do you mean by "execute in your windows pc"? Sorry for asking

Question fastboot flashing unlock fails: unknown command

I am trying to unlock the bootloader of the Poco F3 in order to root it.
I installed the platform tools present in the apt repositories (OS: Pop!_OS 20.10), this is the version I installed:
Bash:
$ fastboot --version
fastboot version 1:8.1.0+r23-8
Installed as /usr/lib/android-sdk/platform-tools/fastboot
Then I did this:
enabled developer options, USB debugging and OEM unlock in the device's settings
turned it off and then on again in fastboot mode (holding power and volume down buttons)
connected it to my PC through USB and then ran the following commands but when I run fastboot flashing unlock I get an unknown command error
Bash:
$ fastboot devices
████████ fastboot
$ fastboot flashing unlock
...
FAILED (remote: unknown command)
finished. total time: 0.000s
Am I missing something here?
I read somewhere that I should install device specific drivers but I couldn't find any for Linux, what do I have to do?

You need to use mitools to unlock the bootloader. Search some videos of how to do it. You will need to wait 168 hours after finish the steps.

Is that actually the only way? According to this guide mi tools isn't required. I read that it only acts as a wrapper of fastboot so if I can I'd rather use fastboot directly and avoid setting up an account just for that.

QuazarOmega said:
Is that actually the only way? According to this guide mi tools isn't required. I read that it only acts as a wrapper of fastboot so if I can I'd rather use fastboot directly and avoid setting up an account just for that.
Click to expand...
Click to collapse
One Way : Mi Unlock Tool

No other way than Mi unlock tool......yet

Oh alright, Mi unlock tool it is then, thanks for the quick help!

It's purely so Xiaomi can limit people to unlock bootloader so that you don't get companies bulk buying devices falshing custom firmware and selling them as other phones for more

QuazarOmega said:
Is that actually the only way? According to this guide mi tools isn't required. I read that it only acts as a wrapper of fastboot so if I can I'd rather use fastboot directly and avoid setting up an account just for that.
Click to expand...
Click to collapse
that guide is wrong flashing unlock would work if the bootloader didnt need a special img file as part of the unlocking process.
the miunlock tool simply does the downloading of the img file in the background once you have waited the mandatory 168 hour wait period.

Unable to flash TWRP

I am trying to flash the LineageOS on my Redmi Note 5 Pro (whyred). Initially, I used Windows 10 for the Xiaomi Unlock Tool. However, the Xiaomi Unlock Tool did not detect my device. So, I used this tool https://www.xiaomitool.com/V2/ to unlock my bootloader and it unlocked instantly. Now, I am using Ubuntu 21.04 (I am more comfortable using the command line here) (with android-tools-adb and android-tools-fastboot packages installed) to try to flash TWRP first.
When I connect my device, adb devices can recognise it. Then I use adb reboot bootloader to enter into fastboot. Now, fastboot devices can recognise it too. The screen of the phone shows the fastboot icon.
But, the problem comes here. I use fastboot flash recovery twrp.img and I get this error
FAILED (Write to device failed (No such device))
Click to expand...
Click to collapse
Now, when I use fastboot devices again. I don't see my device. Another change I see is press any key to shutdown written on the top left corner of the screen of my phone.
USB debugging, USB debugging security, OEM debugging are all enabled. Bootloader is unlocked (as I see in the settings). The phone is updated to latest MIUI version supported officially. And I used the same laptop and method to flash TWRP in a Redmi 3S (land) some time back.
(Posted the same question on android.stackexchange.com also) (https://android.stackexchange.com/questions/238996/redmi-note-5-pro-unable-to-flash-twrp)

Something else I experienced is that after randomly trying to get this right again and again, the command fastboot flash recovery twrp.img did not terminate or fail and got stuck.

So, this was a duplicate. I used the 5th method here and it worked for me. https://forum.xda-developers.com/t/everything-about-anti-roll-back-whyred.3816219/

Bootloop issue with boot reason

hello there, I'm currently using one plus 7 T, I don't know why , but after updating the last software update my device stuck in Boot loop, i can't able to turn it on, The boot reason says that : Init_user0_Failed . Unable to parse kernel log.Could you please help me to get out from this issue. As i'm outstation from the city, so i can't able to reach the service center. I need my data so i'm trusting you that you guys will sort out the issue, Thank you so much for reading this.

"fastboot set_active other" to switch slot

I'm facing the same problem. Please find a workable solution asap. I'll thank endlessly.

HueyT said:
"fastboot set_active other" to switch slot
Click to expand...
Click to collapse
How and where do I do this?

kiranlalge said:
How and where do I do this?
Click to expand...
Click to collapse
In bootloader mode (check YouTube for how to boot into bootloader or fastboot mode for OnePlus 7t)

HueyT said:
In bootloader mode (check YouTube for how to boot into bootloader or fastboot mode for OnePlus 7t)
Click to expand...
Click to collapse
"fastboot set_active other" to switch slot
It looks like the above needs to be typed in somewhere. Because I do not see any typing option on any of the screens the device shows in this situation.
Please help further. I'm not sure if the developer of the given ROM is reading my posts. I'm very hopeful on him to resolve my issue. Fingers crossed.

kiranlalge said:
"fastboot set_active other" to switch slot
It looks like the above needs to be typed in somewhere. Because I do not see any typing option on any of the screens the device shows in this situation.
Please help further. I'm not sure if the developer of the given ROM is reading my posts. I'm very hopeful on him to resolve my issue. Fingers crossed.
Click to expand...
Click to collapse
Plug phone into windows laptop with adb installed on laptop:
[Download] ADB Installer v1.4.3 - Drivers, ADB and Fastboot Tools
Install drivers, ADB and fastboot tools with one single installer.Advertisement What’s ADB Installer v1.4.3 This package includes all required drivers for Android: ADB drivers (Android Debug Bridge), Fastboot and Google USB-drivers. Very easy to install. Features: Small size. Fast installation...
xiaomifirmware.com

I installed the ADB driver , now what ?? Will this erase my phone's data ?

Hi:
I'm with the same problem here, and i'm trying the "fastboot set_active other" command, but it returns me: "waiting for any device".
How can I proceed to make the phone recognized by the PC?

Zesotar said:
Hi:
I'm with the same problem here, and i'm trying the "fastboot set_active other" command, but it returns me: "waiting for any device".
How can I proceed to make the phone recognized by the PC?
Click to expand...
Click to collapse
15 min adb fastboot drivers, OnePlus USB drivers, Qualcomm USB 9008 drivers (msmtool)

ashuetrx said:
I installed the ADB driver , now what ?? Will this erase my phone's data ?
Click to expand...
Click to collapse
Enable "USB debugging" in Dev.Options, Boot into fastboot mode on phone, type "fastboot devices" and it should give you a code--then your phone is ready for fastboot flashing files

Tried in another computer with Windows 10. It returns: "Slot change is not allowed in Lock State"
I get the a code with the fastboot devices, so it seems the phone is ready.

Finally used MSM tool. I lost all my photoss but I recovered the phone.
Thanks for all the help!

Zesotar said:
Finally used MSM tool. I lost all my photoss but I recovered the phone.
Thanks for all the help!
Click to expand...
Click to collapse
how exactly did you do it with MSM tool?

cromedo7 said:
how exactly did you do it with MSM tool?
Click to expand...
Click to collapse
5 seconds with Google.
Fastboot method is much easier and without data loss.
Download
https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790/
Reboot to fastboot mode
Start minimal ADB and fastboot
Type: fastboot devices
If you see device and something like that:1S67gz everything's ok.
Now type: fastboot set_active other
Type reboot.
Done