Related
I was trying to put the hum/hiss sound fix on my sd card and I cannot get my pc to connect via USB...
My wife has a TP2 and it connects fine...
I have tried with/without the sd card in, rebooted the pc and phone, rebooted the phone while connected to the pc.... nothing...
wtf...
anyone else with this problem?
PS... NRGZ28 had posted a very basic rom for booting to android back in Feb and it is now gone from hotfile. Anyone know of a quick boot into android?
- Try a different computer
- Try a hard reset
That are the first thing you should do.
Tried hard reset...
Dif PC is not an option at the moment... I have rebooted...
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
FarBeyond said:
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
Click to expand...
Click to collapse
Reboot your PC? lol bet your tried that already...
Try this:
settings > connections > usb to pc > and disable Faster Data Sync then try. This way uses the generic usb drivers and maybe it will connect.
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
FarBeyond said:
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
Click to expand...
Click to collapse
dont think thats working yet
Ya I don't think that works yet, it's tied to Android software drivers and the use of the USB port, since there is no drivers to control the port only to charge battery. Windows thinks there is something there, but the phones USB can't communicate back....I think this is the issue or at lease after playing around with it on my phone anyway
Not that it's a huge amount of help but might troubleshoot down to the hardware level...if you go into bootloader mode on the phone and connect to USB does it connect?
I don't think you should go that deep and dirty. My touch pro 2 works only with only 1 (non-HTC) cable of the 10 i have at home, all are the "standard" mini-USB but only one works flawlessly for communicating/flashing/syncing, the other cables either do the same error - device not recognized - or windows says that the device could communicate faster - and only copies files slowly.
All in all: you should simply check with another USB cable or if you have the factory HTC cable try it with that. I noticed that the cable i am using other than the HTC one is a very good quality thick (low-resistance and double-shielded) USB cable and it never failed on me.
One other thing you should definitely watch for: plug the USB cable into the motherboard USB port directly (on the back of the PC where you plug the keyboard, mouse etc.), sometimes PC cases with front panel USB outputs simply die, or are wrongly attached to the motherboard USB header and it can cause the aforementioned problems too, not to mention if it is wrongly attached it could harm your phone too.
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Bladeinger said:
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Click to expand...
Click to collapse
Your device manager shows anything when you connect it to your pc?Debugging mode is enabled?
Device Manager shows nothing. Debugging Mode is enabled.
I went through a similar problem a while back - took ages to resolve it - in my case the problem was the usb cables I was using - I had tried a few - but its possible to get cables that only charge and dont communicate - eventually i got it fixed by using a new original cable.
Might not be this for you but it certainly helped me
No fix that I know of...
I had this problem...
I tried different computers, different SD cards, I could take the sd card out and put it in a usb holder and that would work fine, so it really wasn't the sd card. I tried different usb cables too.... nothing would work.
I spoke to my carrier (Orange) to see if they could sort out the problem, and they went through their 'script' of diagnostics and came to the conclusion that it was my computer drivers and there was nothing wrong with the phone!!!
I then rang HTC and after several phones calls later, they said that they would repair it, unfortunately that would have left me without a phone for 2 weeks, so I rang Orange again to demand that they replaced the phone! I told them that HTC had said it was a fault and they sent out a replacement Luckily I had not rooted it at this point, so it was easy for me to swap it.
The replacement phone came the next day, and like magic, worked fine when I connected it to my computer (the same one that apparently had faulty drivers!!)
So, I never found a fix for this, but managed to get a replacement! hopefully you will be able to sort something out...
Good luck
I had this problem once and it turned out to be kernel related, but I'm not sure if this would apply in your case since you've flashed a few ROMs and still have the issue. Still, might be worth trying one of Apache's Buzz kernels or LeeDrOiD's latest... if only to rule out another possibility.
does your PC recognize it if you mount the SD in recovery?
if not, it should be the cable
I had the same thing, I went crazy, and somebody told me to use another cable
and worked
Same happened to me.
Seems the phone crashed the USB controller or something on the PC.
A reboot of the PC fixed it for me (I dont see you mention that anywhere).
First of all, thanks a lot for all your replies!
As I said before, I tried 2 different cables, that both worked fine before. But after your replies I tried a third, new one - same result.
The card is recognized fine by windows when I put it in a USB-Card Adapter.
What I forgot to mention in my initial post, is, that I also formatted the card in my pc, put it back in the phone and started the phone new - same result.
I will try some other kernels now. B.t.w., has anyone a solution for flashing the radio without pc? Via terminal, or recovery? As this is one of the few things, that I couldn't try yet.
I'm 99% sure radio wont be a factor in this mate as they only deal with mobile connections, eg GSM/3G, Bluetooth, WiFi and GPS. If the problem is software and not hardware then I think it will be with the Android USB gadget driver, which is in the kernel. Someone please correct me if I am wrong.
Can you mount as usb in CWM?
No, that doesn't work either.
Sent from my Desire HD using XDA Premium App
1) Try reinstall HTC driver on your windows and try again.
2) If it failed, backup all your files on sd card via USB-Card Adapter. Then use SD Formatter 3.0 (google it) to format the sd card. Copy the backup files back to SD card and try mount the usb again.
HELP i got the same problem
I use the phone in the last 6 months; I have S-OFF, clockworks custom recovery and rooted stock HTC 2.2 Froyo. The only change I made last week is purchasing a desktop cradle "stand". I tested the stand several times the last week and I was able to access the SD card & the HTC sync modes successfully.
Now when I connect the phone using stand or any other USB cable including the original HTC; nothing happened on the computer! The USB manager activates and brings up the USB connection type menu. However, nothing recognized by PC.
I tried all things that you can expect (another PC, another cable, factory reset, new room, with/without cradle) nothing happened, even I connected the phone on a new PC it didn’t detect the new driver!
What to do now??
Hi,
Not sure if you have already, but you can try the new HTC sync version 3.0.5557 - It's actually for the HTC flyer tablet, but i installed it and it works perfectly for the DHD.
You might have a driver issue, but the new 3.0 sync comes with new windows drivers so maybe it's worth a shot.
I've checked the HTC Flyer support page but there's no link there for the 3.0 Synch ... I could only find a direct link, here below
http://www.htc.com/www/SupportViewNews.aspx?dl_id=1097&news_id=923
Be sure to un-install the previous HTC sync first
Its not a driver issue, I tried the new sync. Not working. Nothing is working with USB only the charger.
I have a feeling that electrostatic damaged my USB. I remembered last week I touch the phone while charging and a one electrostatic click was strong.
help!!
Bladeinger said:
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Click to expand...
Click to collapse
hey I have same problem... :-/
what's the solution ?? plz tell me
same problem
please help
EDIT:
Most part of that problem solved, I bought new USB socket with ribbon, and replaced it. It worked. it seems there was a cold solder near the socket. USB works now with other devices like Flash drive, mouse, etc..
Still there's a little problem - while connected to a PC, neither phone nor PC show any signs of connection.
Anyone met the same problem? I checked on to computers Win8.1 and Win7 - no response.
I tried to install some additional drivers but with no luck...
------------------------------------------------------------------------------------------------------------------
< Old >
I've got Huawei P6 and used it with a few ROMs, after flashing one I noticed android doesn't detect USB connection anymore.
It sees it as regular charger - no popup on notofication bar, no way to exchange data with PC.
Changing ROM doesn't solve the problem. I tried stock ones with no effect (installed from zip file in TWRP).
I searched over the web and found no similar case. I think rolling back to full stock could possibly help, but I'm not sure how to do it - will creating dload folder with install data be enough? does it contain all the kernels, recovery and so on - to have the software version exacly as from factory?
USB OTG doesn't seen to work now either, It all worked before. Is there a way to force-detect the connection?
Please, don't write me to check the cable or drivers or to clean the USB plug. Each double... tripple checked. Tried different cables, computers. I've no problem connecting other phones.
I'll be very greatful for help in solving this issue. Even copying a photo to a pc is a problem now...
thanks in advance
Hi, my phone stopped being able to get a USB data connection. The port is physically intact and does not wiggle. I've tried two different Macs and one PC, different USB-A to -C cables (all verified by Benson Leung). Also toggled USB debug, MTP and PTP modes from Developer Options, rebooted phone and computer. When I plug the phone in, it only goes to Charging mode. Android File Transfer doesn't see it and 'adb devices' comes back empty. There is no notification offering me to select connection type. Did I miss anything or is it time to send it in? Thanks, Tony
What OS are you running on your Windows - checking your Device Manager under Control Panels - are all the Google / N5X drivers installed and working correctly before this ? Try uninstalling, reboot PC and re-install them - and, use different USB port to connect the cable (what kind of connections are you using ??)
Can you run ADB ?
Thanks I'm primarily using a Mac (10.10.5) but the PC was running Vista. It was a borrowed PC so I didn't install the drivers. I don't think it's a driver issue though since nothing shows up in device manager and the phone doesn't offer to switch out of charge-only mode. Also the same Mac worked previously.
Hello,
All of a sudden my LG G4, Model 815 can't be recognised by computers anymore. Tried different PC's, with different OS, also have tried different cables. I have been using official cable that I found in original package and everything was working good, but now the phone only shows charging and PC's are showing popups that usb device is not recognised.
I was doing a little reasearch and already tried some simpliest things - reinstalling drivers, tried different cables, different PC's. For example my cable works fine with HTC M9, but doesn't do the thing for me anymore. And vice versa HTC cable works for HTC and does not for my LG. Also I found that you must simply select "charging" in top of your left corner and just select MTP. The problems is, that is not shown in my phone anymore. I'm thinking of trying to do factory reset, but before that maybe some of you have some thoughts? Could it be my phone hardware problem? Before a couple of days ago when everyting was working fine, I did not do anyting unusual, also that phone was never rooted, so I can't believe that it is somehow broken. I have it for nearly three months I think.
And yes, I understand that I can simply transfer my files through, for example AirAndroid of similar apps, but I cannot stand that error sounds playing on my laptop when I connect my phone through the cable to charge it.
Now it is running Android OS 6.0 (marshmallow)
LG G4 MTP Transfer Broken
Hello XDA,
I am having the exact same issue. MTP worked fine and then one day stopped. I believe it happened when I tried to transfer photos from phone to computer via USB and File Explorer. The transfer started, then after about 3 images transferred I received an error, "file transfer the system cannot find the file specified", after that the USB logo disappears, it will disappear from Device Manager, it will not even charge via USB. A phone reboot will fix the USB charging, but the option to switch to MTP is gone. I can't which it in in Developer Options either.
I've also tried all the same things LocaSnai suggested. Such as, different cords (3 of them), windows drivers, LG Air Drive, LG PC Suite, and LG Mobile Support Tool, Verizon Wireless Software Upgrade Assistant, of which none will update or repair the phone. I've also restarted Media Storage service (force stop and reboot). My Nexus 7 tablet connects perfect every time using the same 3 cables. The wife's i phone 6 also connects without issue.
I have performed a factory reset and MTP worked UNTIL I restored the LG backup. Then it went back to the same issue. Factory reset was a LG Support idea. They said that if it happened after the factory reset and back up restore, it could be a virus or issue with an app. How would we go about detecting what is wrong?
While working on this message I tired a few new things. I am able to get MTP to show up (not work as it used to) by plugging the phone into power, and then unplugging and plugging into USB. Each time, MTP will recognize (I tried all the software above when MTP shows up, none recognize the phone.) If I unplug USB and plug back into USB, MTP will not show up, only charge will. Have to plug into power then back to USB (I am using two cables, one in the brick and one in USB. Nexus 7 will work as expected with the same two cables). Some times I see the Yellow Triangle over the LG UBS entry, but following this tutorial doesn't work: www.verizonwireless.com/support/knowledge-base-161810/ Uninstalling the driver and letting it reinstall.
My phone is as original as the day I bought it. ie not rooted or tampered with. Android is up-to-date.
Thank you in advance to the kind folks who offer assistance!
nickzee said:
Hello XDA,
I am having the exact same issue. MTP worked fine and then one day stopped. I believe it happened when I tried to transfer photos from phone to computer via USB and File Explorer. The transfer started, then after about 3 images transferred I received an error, "file transfer the system cannot find the file specified", after that the USB logo disappears, it will disappear from Device Manager, it will not even charge via USB. A phone reboot will fix the USB charging, but the option to switch to MTP is gone. I can't which it in in Developer Options either.
I've also tried all the same things LocaSnai suggested. Such as, different cords (3 of them), windows drivers, LG Air Drive, LG PC Suite, and LG Mobile Support Tool, Verizon Wireless Software Upgrade Assistant, of which none will update or repair the phone. I've also restarted Media Storage service (force stop and reboot). My Nexus 7 tablet connects perfect every time using the same 3 cables. The wife's i phone 6 also connects without issue.
I have performed a factory reset and MTP worked UNTIL I restored the LG backup. Then it went back to the same issue. Factory reset was a LG Support idea. They said that if it happened after the factory reset and back up restore, it could be a virus or issue with an app. How would we go about detecting what is wrong?
While working on this message I tired a few new things. I am able to get MTP to show up (not work as it used to) by plugging the phone into power, and then unplugging and plugging into USB. Each time, MTP will recognize (I tried all the software above when MTP shows up, none recognize the phone.) If I unplug USB and plug back into USB, MTP will not show up, only charge will. Have to plug into power then back to USB (I am using two cables, one in the brick and one in USB. Nexus 7 will work as expected with the same two cables). Some times I see the Yellow Triangle over the LG UBS entry, but following this tutorial doesn't work: www.verizonwireless.com/support/knowledge-base-161810/ Uninstalling the driver and letting it reinstall.
My phone is as original as the day I bought it. ie not rooted or tampered with. Android is up-to-date.
Thank you in advance to the kind folks who offer assistance!
Click to expand...
Click to collapse
I had the same problem (at the same time I had problems with my sim and my message light was showing a dim green..), tried everything, drivers, cables, at the end a different pc and then I rebooted my phone while It was connected to the 2nd pc, after this, every problem was gone and I good see my phone again in windows. Now after a few reboots with and without the connection to a pc, the phone seems to be working as usual again...
(and My phone is also as original as the day I bought it. ie not rooted or tampered with. Android is up-to-date.)
Doorwerth, thank you for the suggestion. Tried that a few minutes ago and still have an issue.
I'm considering this next: LG G4: How to Boot into Download Mode. I think it's a bit extreme.