I cant seem to successfully root Galaxy S7 SM-G930W8. NRD90M. G930W8VLU2BQK4. I am in Canada. Advice is much appreciated.
This method does NOT work for me:
• Extract (unzip) the firmware file
• Download Odin v3.12.7
• Extract Odin ZIP file
• Open Odin v3.12.7
• Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the firmware file to AP / PDA
• Make sure re-partition is NOT ticked
• Click the start button, sit back and wait few minutes
Rob
This is the S7 Active forum. If you have an S7 then you are in the wrong forum.
Related
Hi, guys i just thought that when we mess up our galaxy y then we have to search again and again, separately for root file, stock firmware and odin so i bring to you a complete file that contains the stock firmware, the root file, and odin also. it is a rar file and none of the components have been created by me.
Credits:
stock firmware: doky
odin: google
root file: i don't remember sorry
guide for new ones:
stock firmware recovery:
1)get ur mobile to download mode or odin mode by shutting down and then pressing vol down + power button + home button. then press vol up when the warning comes ( don't worry nothing will happen )
2)connect mobile to pc and open odin. make sure u have mobile drivers. get them by installing kies.
3) click on pda and choose the file pda_s5360_dxlc1. now on csc and choose the file csc_s5360_dxlc1. now on phone and choose modem_s5360_dxlc1.
4) check auto reboot and f.reset time but make sure to uncheck all others. click start. if pass comes written on one of the upper boxes then it's done.
root guide:
1)shut down mobile.
2)get to recovery by pressing vol up + power button + home button.
3) choose install from sd card and choose direct root file.
4) it is done
5)reboot
get it here: here
just to let you know its not a good idea for people from europe to flash that stock firmware - its Indonesia, Malaysia, Philippines, Singapore, Vietnam firmware
its also out dated
you also dont need kies to instal the drivers - there is a usb drivers file from samsung which is much smaller so unless you actually use kies there is no need for it
later firmware and firmware for other countries can be found
http://forum.xda-developers.com/showthread.php?p=48462297#post48462297
I ThinK
xday123 said:
Hi, guys i just thought that when we mess up our galaxy y then we have to search again and again, separately for root file, stock firmware and odin so i bring to you a complete file that contains the stock firmware, the root file, and odin also. it is a rar file and none of the components have been created by me.
Credits:
stock firmware: doky
odin: google
root file: i don't remember sorry
guide for new ones:
stock firmware recovery:
1)get ur mobile to download mode or odin mode by shutting down and then pressing vol down power button home button. then press vol up when the warning comes ( don't worry nothing will happen )
2)connect mobile to pc and open odin. make sure u have mobile drivers. get them by installing kies.
3) click on pda and choose the file pda_s5360_dxlc1. now on csc and choose the file csc_s5360_dxlc1. now on phone and choose modem_s5360_dxlc1.
4) check auto reboot and f.reset time but make sure to uncheck all others. click start. if pass comes written on one of the upper boxes then it's done.
root guide:
1)shut down mobile.
2)get to recovery by pressing vol up power button home button.
3) choose install from sd card and choose direct root file.
4) it is done
5)reboot
get it here: here
Click to expand...
Click to collapse
Well You Should GaVe The Original 2.3.6 For Every Country
It They Install ThiS Via odin in other countrt They Wont Be Able To Regain Back Warranty.
Well I also Think ThaT There Are Many Threat About This Topic Already.
Thanks
sent from terminal emulator
hi today i just finish help my friend to root his Samsung J1 Dous / J1 dual sim
the latest version of system is Kitkat 4.4.4,
the critical case here is unsecure kernel, in my case this kernel was working on my device.
here list of device where known is been tested and working with this kernel.
J100HXXU0AOA8
J100HXXU0AOAC
J100HOJV0AOB1
J100HXXU0AOC3
J100HXCU0AOE1
J100HXCU0AOG1
J100HXXU0AOK1
do it at your own Risk.
what you need :
unsecure kernel bring from gsmforce1
Odin : included in unsecure kernel rar file
CWM
and latest chainfire root
Step :
1. flash Kernel
- boot your phone into download mode by prassing VOL DOWN + POWER + HOME BUTTON then continue by pressing VOL UP.
- open odin make sure its found your phone look at the log found com ??
- Add kernel file to AP / PDA section
- then start flash
2. flash CWM
- boot your phone into download mode by prassing VOL DOWN + POWER + HOME BUTTON then continue by pressing VOL UP
- open odin make sure its found your phone look at the log found com ??
- Add the tar file to AP / PDA section
- then start flash
3. root
- copy chainfire-root zip file to sdcard
- boot your phone into CWM mode by prassing VOL UP + POWER + HOME BUTTON .
- do install and locate the chainfire zip file
4. done. congratzzz your phone are rooted+cwm+fully unlock for custom rom
Thanks to :
gsmforce1 at gsmhosting
gsm rabby
CTXz
Chainfire
bullghost said:
hi today i just finish help my friend to root his Samsung J1 Dous / J1 dual sim
the latest version of system is Kitkat 4.4.4,
the critical case here is unsecure kernel, in my case this kernel was working on my device.
here list of device where known is been tested and working with this kernel.
J100HXXU0AOA8
J100HXXU0AOAC
J100HOJV0AOB1
J100HXXU0AOC3
J100HXCU0AOE1
J100HXCU0AOG1
J100HXXU0AOK1
do it at your own Risk.
what you need :
unsecure kernel bring from gsmforce1
Odin : included in unsecure kernel rar file
CWM
and latest chainfire root
Step :
1. flash Kernel
- boot your phone into download mode by prassing VOL DOWN + POWER + HOME BUTTON then continue by pressing VOL UP.
- open odin make sure its found your phone look at the log found com ??
- Add kernel file to AP / PDA section
- then start flash
2. flash CWM
- boot your phone into download mode by prassing VOL DOWN + POWER + HOME BUTTON then continue by pressing VOL UP
- open odin make sure its found your phone look at the log found com ??
- Add the tar file to AP / PDA section
- then start flash
3. root
- copy chainfire-root zip file to sdcard
- boot your phone into CWM mode by prassing VOL UP + POWER + HOME BUTTON .
- do install and locate the chainfire zip file
4. done. congratzzz your phone are rooted+cwm+fully unlock for custom rom
Thanks to :
gsmforce1 at gsmhosting
gsm rabby
CTXz
Chainfire
Click to expand...
Click to collapse
I will try it when I've done with multiple tasks on my j100h device.
[SERVED]
How to root sm-j100ml?
bullghost said:
hi today i just finish help my friend to root his Samsung J1 Dous / J1 dual sim
the latest version of system is Kitkat 4.4.4,
the critical case here is unsecure kernel, in my case this kernel was working on my device.
here list of device where known is been tested and working with this kernel.
J100HXXU0AOA8
J100HXXU0AOAC
J100HOJV0AOB1
J100HXXU0AOC3
J100HXCU0AOE1
J100HXCU0AOG1
J100HXXU0AOK1
do it at your own Risk.
what you need :
unsecure kernel bring from gsmforce1
Odin : included in unsecure kernel rar file
CWM
and latest chainfire root
Step :
1. flash Kernel
- boot your phone into download mode by prassing VOL DOWN + POWER + HOME BUTTON then continue by pressing VOL UP.
- open odin make sure its found your phone look at the log found com ??
- Add kernel file to AP / PDA section
- then start flash
2. flash CWM
- boot your phone into download mode by prassing VOL DOWN + POWER + HOME BUTTON then continue by pressing VOL UP
- open odin make sure its found your phone look at the log found com ??
- Add the tar file to AP / PDA section
- then start flash
3. root
- copy chainfire-root zip file to sdcard
- boot your phone into CWM mode by prassing VOL UP + POWER + HOME BUTTON .
- do install and locate the chainfire zip file
4. done. congratzzz your phone are rooted+cwm+fully unlock for custom rom
Thanks to :
gsmforce1 at gsmhosting
gsm rabby
CTXz
Chainfire
Click to expand...
Click to collapse
The link is for twrp.
ClockWorkMod here: https://forum.xda-developers.com/t/cwm-clockworkmod-galaxy-j1-sm-j100h.4332687/
Background
I have a Note 7 (SM-930FD Exynos processor which is the version sold mainly in Singapore and Philippines) installed Note FE rom and running fine for month. For what ever reason last night I rebooted the phone and encounter the deadly 'Custom binary blocked by fro lock' (in red) message. After many hours in panic mode, this is how I manage to 'rescue' it. Credits to those folks who posted the solution. I am just posting this for the ease of those searching. Credits goes to those who posted the various file and methods.
Steps :
1. Download the stock rom from here : https://firmwarex.net/samsung-note-7-sm-n930f-stock-rom-flash-file/
- I use the file : FirmwareX.Net_SM-N930FD_N930FXXU2BPI7_N930FOLB2BPI5_XXV_6.0.1_Full.rar (2.3gb), download through google drive (fast)
- password is 'FirmwareX.Net'
- Getting the original firmware for your device is the most difficult step. Note 7 original firmware is not hosted on sammobile
2. Download Odin from : https://odindownload.com/download/
- I use SamsungOdin 3.12.3
- unzip all the file from the firmware .rar file
- there should be 5 .md5 files extracted from the firmware rar file.
- load the files into the correct box, file name starting with AP goes to AP, etc
- for your ease, see the Odin screenshot attached below
3. Boot your Note 7 into download mode
- hold [Power] + [Volume Down] + [Home Button]
- when presented with an option to go into recovery mode, press volume up
- Here is some instruction with pictures : https://www.fonepaw.com/solution/enter-samsung-recovery-download-mode.html
4. Plug the phone in. Click on the start button.
5. Once completed successfully it will auto reboot and you Note 7 will reboot into the original Samsung Rom.
- Note : all previous data will be gone! (there is no known way to save it - as far as I know. I am glad I am able to recover it the use of the phone).
- Highly recommended : enable developer mode and select OEM unlock to prevent future 'Custom Binary blocked by frp issue'
- See here for instruction : https://www.the***********.com/enable-oem-unlocking-on-android/
6. Rejoice and give thanks!
What's Next?
1. I installed TWRP boot for the ability to install custom rom : https://forum.xda-developers.com/note-7/development/recovery-official-twrp-galaxy-note-7-t3446047
2. I installed this Aurora ROM (Andriod 8) and it works perfectly on my SM-930FD (need to follow the instructions to the letter!).
3. Don't worry, now that you have the Original Samsung ROM for your SM-930FD device, any screw up you can use Odin to flash the original rom again! Never ever get bricked again! Hoorah!!
hi i wanted to flash magisk using twrp so i had to install twrp first using odin i followed all instructions in there androidweblog.com/samsung-galaxy-a50-sm-a505f-root-install-twrp-recovery
and flashed that twrp zip file
mega.nz/#!SWYwAQAb!bbLnex8yhT7tyBTdTMr2wIS-tzITjg5VMJ_p1msXenQ
but after flashing
the phone is stuck in samsung a50 logo and i can do nothing except opening download mode
and i get error this phone's bootloader is unlocked and its software integrity can't be verified any data on this phone maybe un vulnerable to attackers don't software any important or sensitive information on this phone
what should i do to bring it back and uninstall flashed twrp
thanks in advance
1) Find you firmware [https://www.sammobile.com/firmwares/search/a505/]
-Clicking on your model will present you with firmware downloads
-Find yours and download it [country and network or just the country should work]
-Extract it somewhere.
2) Get Odin [https://dl2018.sammobile.com/Odin3-v3.14.4.zip]
-Extract it somewhere
-Load it
-Add the files from the firmware folder into the correct sections (i.e/ ap, bl, csc - I cant remeber them all of the top of my head)
3) Get into download mode
-Power off device or if its boot looping Press and hold power + vol down to force a restart
-Press and hold both vol buttons and connect it to your computer with usb
-Odin should now say added in the log
4) press start and wait
Tutorial update manually via ODIN
About Update: Android 11 official ROM One UI 3.1 Build number: CUBC, Baseband A505FXXU7CUB8, Android Security Patch Level 1 March 2021.
Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Google Drive download link available only for one week since this post published, get the download link below.
Short Review
It looks smooth, new Portrait feature on Camera, New Edge panel
Flashing instructions Android 11 on Samsung Galaxy A50 SM-A505F
Download and Extract (unzip) the firmware file ( AP, BL, CP, CSC )
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Download Odin http://odindownload.com/SamsungOdin/ ( ignore this if you have downloaded it )
Open Odin: Add the firmware files AP, BL, CP and CSC.
In Option make sure to ticked F.Reset Time and Auto-Reboot only
Click the start button, sit back and wait few minutes
Setup the Phone
Done!
Download link in Video Tutorial
I hope they'll make a custom ROM ASAP