I need help please, i have just upgrade my Note 2 to omega V19 now i have the following issues:
- My wifi is not working i dont know how to use odin to flash the fix.
- I reboot into recovery and i select the option to disable the stock recovery, now i dont have root access-
Please help me!! i need wifi and root!!
Read around the forum how to flash, then flash philz recovery using odin, and then flash Wi-Fi patch by Dr. Ketan from recovery.
Sent from my GT-N7100 using Tapatalk
Don't panic friend
Here what you should do:
1. Download ODIN 3.09
2. Download Dr.Ketan WiFi patch
3. Download PhilZ recovery in tar.md5 format (its available in developer post)
4. Download your favorite ROM (Dr.Ketan's v5 or DN3 v3 are my recommendations)
Now
5. Power off your phone
6. Enter in Download mode (Vol down+Home+Power)
7. Connect your phone with PC through USB cable
8. Put PhilZ recovery tar file in PDA column of ODIN 3.09 and hit START (make sure it is showing your device as added)
9. Don't remove your phone from cable till ODIN shows PASS
Do the same for WiFi patch after step 10 (flashing your ROM)
10. Enter in to Recovery (Volume UP + Home + Power) and flash your favourite ROM
Enjoy !!!
Good Luck !!!
WARNING!!! This solution provided as is (with no warranty of any kind). Be careful because the described operations rather dangerous and possibly can brick your device. Author is not responsible for your device damage.
IMPORTANT: Usage of this method will affect the state of the "Custom BIN down" counter in your device. This means that you may have problems with official warranty.
Step 1. Getting software. change * with .
1. Install Samsung drivers
http://www*mediafire*com/download/l174yb0369b5ecv/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
2. Download Odin 3.0.7
http://www*mediafire*com/download/1ya3rsdqmd2f9j7/Odin307.zip
3. Download CWM Touch
http://www*mediafire*com/download/ohuwh4lq65atvqv/recovery.tar.md5
4. Download UPDATE-SuperSU-v1.65 package for rooting
http://www*mediafire*com/download/v4q6691tei4l56p/UPDATE-SuperSU-v1.65.zip
5. Download Stock recovery
http://www*mediafire*com/download/mmxdxe5ixbtwkj0/Stock-Recovery_SCH-I759.zip
Step 2. Flash the updates 1. Switch off the device. Hold "volume down"+"home" buttons and press power button. When device switch on release the power button but continue to hold volume down and home until Download mode warning appear. Plug in the USB cable and press volume up button to continue. The device will load in ODIN download mode.
2. Extract ODIN 3.0.7.zip, Run ODIN 3.0.7. Don't change any setting (checkboxes ) - leave them in default state. Your device should appear in "ID:COM" part of the screen as serial device (i.e. "COM38") - if not check if your USB port is functional and Samsung drivers installed correctly.
3. Click on PDA button and chose recovery.tar.md5 file saved during step 1.2. Don't rename or decompress the file - otherwise it will not work. Wait until ODIN decompress the package and check the checksums. After it just press START button and wait until the process is over.
4. Copy UPDATE-SuperSU-v1.65 and Stock Recovery (CWM_ORI_SCH-I759) package for rooting on SD card External and put the card in device's slot.
5. Switch off your device again. Hold "volume up"+"home" buttons and press power button to switch on. Don't release volume up and home until the recovery loaded. Using volume up and volume down buttons navigate to menu item "apply zip from SdCard" and press power button to commit operation. Then navigate to UPDATE-SuperSU-v1.65.zip file and press power button again.
6. Done. Your device should be rooted now.
7. If you can't reboot on cwm, Flash "apply zip from SdCard" Stock Recovery (Stock-Recovery_SCH-I759.zip).
Bugs: sometimes ca't reboot in cwm, solution: flash stock recovery (Stock-Recovery_SCH-I759.zip). Please help me to fix it
Thanks Master.
Thanks Master.
On progress ROOT.
need help
i can flash CWM recovery ?
CWM v6.0.5.1 recovery for S3 Neo
---------------------------------------------------------------------------------------------------------------------------------------------------------
Installation:
1st Method ( Flashable ZIP )
1. Download CWM flashable zip for S3 Neo and transfer it to your phone
2. Boot your device into recovery ( Vol Up + Home+ Power )
3. Install TWRP flashable zip
4. Now you have TWRP recovery on your device ( Boot with vol up + home + power )
2nd Method ( Odin method )
1. Download recovery.tar.md5
2. Download ODIN and Samsung USB drivers
3. Boot device in download mode ( Vol down + home + power )
4. Press volume up ( continue ) and connect phone with PC
5. Make sure Odin recognizes your phone ( There should write somethiing like "0:[COM11]" in first box and it will be yellow )
6. Press PDA and navigate to recovery.tar.md5
7. Make sure Re-partition is unchecked
8. Press "Start" and wait few seconds
9. Device will reboot and you will have CWM recovery on your device ( Boot with vol up + home + power )
3rd method ( Terminal emulator - requires rooted device )
1. Download cwm.img and transfer it to your phone ( i will use /sdcard but it is optional)
2. Download Terminal Emulator from playstore
3. Open Teminal emulator and type
NOTE: It is VERY IMPORTANT to write this correctly because you are risking to hard brick your device if you mistype number, double check before pressing enter
Code:
su
dd if=/sdcard/cwm.img of=/dev/block/mmcblk0p15
or to be 100% sure you can write this, effect is same
Code:
su
dd if=/sdcard/cwm.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Note: You can change path to recovery.img to your optional
4. Now you have TWRP recovery on your device ( Boot with vol up + home + power )
Enjoy!
---------------------------------------------------------------------------------------------------------------------------------------------------------
If you want to support my work you can donate me coffe. Use "Send payment" option on paypal ( [email protected] ) because "Donate" option is not available in my contry. Thanks.
---------------------------------------------------------------------------------------------------------------------------------------------------------
thanks work fine for me good job :good::good::good:
good job Rox and thank you
download link is broken
uzzo85 said:
download link is broken
Click to expand...
Click to collapse
tested just now link are work
spawk said:
tested just now link are work
Click to expand...
Click to collapse
thanks man, right now it work!!
I'm sorry but...although I have 11 posts, I still can't see the flashable zip link...
nicese said:
I'm sorry but...although I have 11 posts, I still can't see the flashable zip link...
Click to expand...
Click to collapse
+1
Sent from my GT-I9301I
There is no flashable zip file, only image file (3rd method) via adb/terminal emulator or via flashify & co.
Thanks, the 3rd method didn't work but I solved with Flashify :good:
Updated link in 3rd method, now cwm recovery is flashing and wiping faster ! And it can be installed on both variants ( GT-I9300I AND GT-I9301I )
thanks it worked perfectly and easily installed .
edit : damn it , flashing is realy fast
Now you can flash CWM using odin
Rox said:
CWM v6.0.5.1 recovery for S3 Neo
---------------------------------------------------------------------------------------------------------------------------------------------------------
Installation:
2nd Method ( Odin method )
1. Download recovery.tar
2. Download ODIN and Samsung USB drivers
3. Boot device in download mode...
---------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
The recovery.tar link is dead. Can you reapload, please?
Edit: I think this is the new link
does it work for I9301I
Odin fails.
If I try to flash with odin the recovery.tar, it fails. I'm using GT-I9301I. Please help! Thanks!
I will check it...
Odin Stuck in Recovery.img using the recovery.tar given in the method 2.
Sorry for bother again Rox, but I can't install this CWM on my device. Odin fails
Odin file updated now, there shouldnt be troubles with odin flashing anymore
Background
I have a Note 7 (SM-930FD Exynos processor which is the version sold mainly in Singapore and Philippines) installed Note FE rom and running fine for month. For what ever reason last night I rebooted the phone and encounter the deadly 'Custom binary blocked by fro lock' (in red) message. After many hours in panic mode, this is how I manage to 'rescue' it. Credits to those folks who posted the solution. I am just posting this for the ease of those searching. Credits goes to those who posted the various file and methods.
Steps :
1. Download the stock rom from here : https://firmwarex.net/samsung-note-7-sm-n930f-stock-rom-flash-file/
- I use the file : FirmwareX.Net_SM-N930FD_N930FXXU2BPI7_N930FOLB2BPI5_XXV_6.0.1_Full.rar (2.3gb), download through google drive (fast)
- password is 'FirmwareX.Net'
- Getting the original firmware for your device is the most difficult step. Note 7 original firmware is not hosted on sammobile
2. Download Odin from : https://odindownload.com/download/
- I use SamsungOdin 3.12.3
- unzip all the file from the firmware .rar file
- there should be 5 .md5 files extracted from the firmware rar file.
- load the files into the correct box, file name starting with AP goes to AP, etc
- for your ease, see the Odin screenshot attached below
3. Boot your Note 7 into download mode
- hold [Power] + [Volume Down] + [Home Button]
- when presented with an option to go into recovery mode, press volume up
- Here is some instruction with pictures : https://www.fonepaw.com/solution/enter-samsung-recovery-download-mode.html
4. Plug the phone in. Click on the start button.
5. Once completed successfully it will auto reboot and you Note 7 will reboot into the original Samsung Rom.
- Note : all previous data will be gone! (there is no known way to save it - as far as I know. I am glad I am able to recover it the use of the phone).
- Highly recommended : enable developer mode and select OEM unlock to prevent future 'Custom Binary blocked by frp issue'
- See here for instruction : https://www.the***********.com/enable-oem-unlocking-on-android/
6. Rejoice and give thanks!
What's Next?
1. I installed TWRP boot for the ability to install custom rom : https://forum.xda-developers.com/note-7/development/recovery-official-twrp-galaxy-note-7-t3446047
2. I installed this Aurora ROM (Andriod 8) and it works perfectly on my SM-930FD (need to follow the instructions to the letter!).
3. Don't worry, now that you have the Original Samsung ROM for your SM-930FD device, any screw up you can use Odin to flash the original rom again! Never ever get bricked again! Hoorah!!
hi i wanted to flash magisk using twrp so i had to install twrp first using odin i followed all instructions in there androidweblog.com/samsung-galaxy-a50-sm-a505f-root-install-twrp-recovery
and flashed that twrp zip file
mega.nz/#!SWYwAQAb!bbLnex8yhT7tyBTdTMr2wIS-tzITjg5VMJ_p1msXenQ
but after flashing
the phone is stuck in samsung a50 logo and i can do nothing except opening download mode
and i get error this phone's bootloader is unlocked and its software integrity can't be verified any data on this phone maybe un vulnerable to attackers don't software any important or sensitive information on this phone
what should i do to bring it back and uninstall flashed twrp
thanks in advance
1) Find you firmware [https://www.sammobile.com/firmwares/search/a505/]
-Clicking on your model will present you with firmware downloads
-Find yours and download it [country and network or just the country should work]
-Extract it somewhere.
2) Get Odin [https://dl2018.sammobile.com/Odin3-v3.14.4.zip]
-Extract it somewhere
-Load it
-Add the files from the firmware folder into the correct sections (i.e/ ap, bl, csc - I cant remeber them all of the top of my head)
3) Get into download mode
-Power off device or if its boot looping Press and hold power + vol down to force a restart
-Press and hold both vol buttons and connect it to your computer with usb
-Odin should now say added in the log
4) press start and wait