My phone is currently in Boot Loop and I heard that you have to flash the recovery image on the AP file to the phone.
Unfortunately, whenever I try to flash it with Odin, this message appears:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1205)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on my phone a new line appears saying SW REV CHECK FAIL : [system]Fused 2 > Binary 1
Any ideas as to what's happening?
Yep. After update BK5, Samsung upgraded the bootloader. The bootloader is locked so that you can't downgrade it to a lower software version. Flash the BK5 firmware through odin and you'll be good to go.
Let me know if you need more help or drop a thanks if you're set to go.
We're do u get bk5 firmware
Sent from my SM-G955U using XDA-Developers Legacy app
---------- Post added at 10:48 AM ---------- Previous post was at 10:48 AM ----------
Bk5,firmware
Sent from my SM-G955U using XDA-Developers Legacy app
paris10 said:
We're do u get bk5 firmware
Sent from my SM-G955U using XDA-Developers Legacy app
---------- Post added at 10:48 AM ---------- Previous post was at 10:48 AM ----------
Bk5,firmware
Sent from my SM-G955U using XDA-Developers Legacy app
Click to expand...
Click to collapse
Should be able to get it from Updato.com
Related
hi i tried to flash galaxy grand i9802 but in said failed
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
plz help me i cant use my phone
Are you using odin 3.04 ?
Sent from my GT-I9082 using xda premium
akiratoriyama said:
Are you using odin 3.04 ?
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
yes i using odid 3.04 and try 3.07 but no resault
hassanshaikhi said:
yes i using odid 3.04 and try 3.07 but no resault
Click to expand...
Click to collapse
Check any kies software is running background
Sent from Gt-I9082
rejocie001 said:
Check any kies software is running background
Sent from Gt-I9082
Click to expand...
Click to collapse
yes kies is running in background
kies.exe
kies.pdlr.exe
kiestryagent.exe
Does the software Kiess make the Odin not be able to flash my mobile phone?
(My mobile phone isn't available right now to try)
hassanshaikhi said:
yes kies is running in background
kies.exe
kies.pdlr.exe
kiestryagent.exe
Does the software Kiess make the Odin not be able to flash my mobile phone?
(My mobile phone isn't available right now to try)
Click to expand...
Click to collapse
Kies are used for drivers only its shold not be running ... this same thing hapen with me (i dnt knw perfect resn)... den i stop kies and tried succesful in flashing ... use odin3.04 only ... and while flashing odin may say notresponding just wait for while it will work ... flash amcd6 ron for gud batry and perfrmnce ...
Sent from my GT-I9082 using xda premium
Why do you say to use odin 3.o4 only 3.07 is better and faster.
Suriya357 said:
Why do you say to use odin 3.o4 only 3.07 is better and faster.
Click to expand...
Click to collapse
Hey im not dev ... but every dev recomend odin3.04 for grand ... i dnt know why ? U can see tutorials in grand section u will only find odin3.04 ...
Sent from my GT-I9082 using xda premium
yeah using odin 3.04 will help and stop kies before flashing always..!!
---------- Post added at 12:19 PM ---------- Previous post was at 12:13 PM ----------
remember place md5 in pda...
adheeshkurekar said:
Hey im not dev ... but every dev recomend odin3.04 for grand ... i dnt know why ? U can see tutorials in grand section u will only find odin3.04 ...
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
this is becoz i used odin3.07 and it does not work properly for me so i personally use odin 3.04
i close kies from taskmanager but noting change
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
help me (
thanks for all its flashed successfully
tanQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008> dt-blob
<ID:0/008> cache.img
<ID:0/008> system.img
<ID:0/008> hidden.img
<ID:0/008> param.lfs
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Added!!
hassanshaikhi said:
thanks for all its flashed successfully
tanQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008> dt-blob
<ID:0/008> cache.img
<ID:0/008> system.img
<ID:0/008> hidden.img
<ID:0/008> param.lfs
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Added!!
Click to expand...
Click to collapse
gr8 then
That's a great news :good:
May be you could share how you succeeded and also edit title and add [SOLVED].
Good luck !!!
Please help.....problem of booting galaxy grand GT-I9082
i wanted to root my phone, unfortunately in odin 3.07, i checked NAND ERASE ALL option. now i cannot start my phone. i recovered rom using samsung kies. bt it doesn't start......plz plz plz help.........
i kinda have the same problem . i know this is an old thread but i cant find solution nowhere.
i am getting the exact fail at the same spot as OP . i would really like to know what you did to succesfully install the software .
also when in download mode i get this?
ODIN MODE
PRODUCT NAME: GT-I9080L
CUSTOM BIN DOWN: Yes ( 10 counts)
CURRENT BIN: Custom
SYSTEM STATUS: Custom
that install bar only gets to 3 millimeter or so than fails.
can anyone pls hel me out
Hi make sure samsung kies not running and connect usb cable in back of youre case not front
just want to comment because i've fixed it:victory::victory::victory::victory::victory:
I tried rooting my Galaxy sIII and it failed, and wont boot.
So per recomendations I found here, I downloaded a stock image for the phone, and every one I try to flash, ends in an error in odin.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALEM_I747ATTALEM_I747UCALEM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
And on the phone it reads:
SW REV CHECK FAIL : FUSED 2 > BINARY 0
HELP!
Bump!
Can anyone help?
BlakDrgn said:
Bump!
Can anyone help?
Click to expand...
Click to collapse
What is your firmware on phone? Did you take last OTA to 4.3?
norbarb said:
What is your firmware on phone? Did you take last OTA to 4.3?
Click to expand...
Click to collapse
Yeah it ota'ed to 4.3 I believe.
BlakDrgn said:
Yeah it ota'ed to 4.3 I believe.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2537910 Read this and some more about 4.3 OTA
http://forum.xda-developers.com/showthread.php?t=2526698
norbarb said:
http://forum.xda-developers.com/showthread.php?t=2537910 Read this and some more about 4.3 OTA
http://forum.xda-developers.com/showthread.php?t=2526698
Click to expand...
Click to collapse
Thanks! reflashed Clockwork mod and the phone booted right up!
Bricked when rolling back from 4.3 to 4.1.2
I got the OTA update 4.3 and it has been draining the battern significantly. So i resorted to revert to 4.1.2 and i think bricked the phone.
This is the error i get from odin when trying to flash 4.1.2
<OSM> I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
I see this error in the phone
s3 sw rev check fail: Fused 2 > Binary 0
Now phone does not boot up either. I'm not a android geek - was just trying to get to a older stable version where battery easily lasted for a day...
Saw this thread after i tried to flash 4.1.2 I still don't see a solution posted on how to get the phone to work again...
Please help!!!!!!!!!!!!!!!!!
---------- Post added at 06:41 AM ---------- Previous post was at 06:35 AM ----------
BlakDrgn said:
Thanks! reflashed Clockwork mod and the phone booted right up!
Click to expand...
Click to collapse
Can you please help on how to get this clockwork mod reflashed?
Is it possible to do a factory reset with Odin? I flashed this rom http://forum.xda-developers.com/showthread.php?t=2268880 on to my phone but it's on M919UVUEMK2. Currently, my phone is soft bricked and I can only go into download mode and I can't install the clockwork recovery mod. My phone will boot to the Galaxy S4 logo and turnoff.
re: odin flash
Trong357 said:
Is it possible to do a factory reset with Odin? I flashed this rom http://forum.xda-developers.com/showthread.php?t=2268880 on to my phone but it's on M919UVUEMK2. Currently, my phone is soft bricked and I can only go into download mode and I can't install the clockwork recovery mod. My phone will boot to the Galaxy S4 logo and turnoff.
Click to expand...
Click to collapse
About the only thing you can do is start all over again and put your phone into download
mode and flash the official stock samsung 4.2.2 MDL odin flash firmware.
After that you can root and odin flash twrp or cwm custom recovery.
Here is a link for the official samsung m919 4.2.2 stock mdl firmware:
http://k0nane.info/rom/M919UVUAMDL_M919TMBAMDL_TMB.zip
After downloading unzip and you will find the .TAR file which you
need to use with Odin in it's PDA slot.
Good luck!
How can I see my modem on my phone. I just want to be sure what the modem I have now.
Sent from my SGH-M919 using xda premium
xperia_88 said:
How can I see my modem on my phone. I just want to be sure what the modem I have now.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
In Settings/More/About device/Baseband
☞ Sent from here☜???
Thanks but it didn't work. Odin keeps say it failed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Trong357 said:
Thanks but it didn't work. Odin keeps say it failed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You're using a stock FW to go from 4.3 to 4.2.2 which is not possible. You have to use a 4.3 stock FW to go back to stock. Once you're on the 4.3 boot loader, you're stuck with 4.3. You can NOT downgrade to a different bootloader.
---------- Post added at 01:09 AM ---------- Previous post was at 01:05 AM ----------
Download the 4.3 FW from here, should be the first link.
Thanks but:"Hotfile has been shudown. A download link to Terafile will be presented as soon as the firmware is uploaded. We are busy uploading all files to the new host. We apologize for the inconvenience."
re: official stock m919 firmware
Trong357 said:
Thanks but:"Hotfile has been shudown. A download link to Terafile will be presented as soon as the firmware is uploaded. We are busy uploading all files to the new host. We apologize for the inconvenience."
Click to expand...
Click to collapse
Here is the identical firmware as found on SamMobile.com
This is the M919UVUEMK2_M919TMBEMK2_TMB.zip
This contains the TAR file for the official Samsung M919 MK2 4.3 stock firmware.
Here is the direct download link: https://copy.com/hzfaqBpWhinn/M919UVUEMK2_M919TMBEMK2_TMB.zip?download=1
This is a much faster mirror than the Hotfile host which SamMobile uses.
Good luck!
Thanks and thank you and to everyone else who helped. The rom installed successfully but when I tried to turn the phone on, it gets to the T-Mobile splash screen and doesn't go on from there. I left it there for nearly 30 min but it didn't load and the phone was very hot. I re-Odin the rom and tried wiping cache partition and dalvik in recovery but the phone never goes past the T-Mobile screen.
Misterjunky, sir. Thank you!. Your link helped me to unbrick. I've a working ROM now. My root is gone, wifi slightly flaky - but hey can make calls etc.!
I am on 4.3 + MK2 now. My warranty is void etc..but really thank u very much!.
HELP my Sprint GS3 is stuck in odin mode
ODIN MODE
PRODUCT NAME; SPH-L710
CURRENT BINARY; CUSTOM
SYSTEM STATUS; CUSTOM
QUALCOMM SECUREBOOT; ENABLE
WARRANTY BIT; 1
BOOTLOADER AP SWREV; 2
I can get to download mode with the three button combo, but i cant flash to stock, when i do it reads
ODIN MODE
PRODUCT NAME; SPH-L710
CURRENT BINARY; CUSTOM
SYSTEM STATUS; CUSTOM
QUALCOMM SECUREBOOT; ENABLE
WARRANTY BIT; 1
BOOTLOADER AP SWREV; 2
SW REV CHECK FAIL ; FUSED 2 > BINARY 1
and in odin it says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_L710VPUCMK3_L710SPRCMK3_2034598_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anyway to fix my phone, ive been trying now for about 3 months to get it, and nothing works
guy with phone said:
HELP my Sprint GS3 is stuck in odin mode
ODIN MODE
PRODUCT NAME; SPH-L710
CURRENT BINARY; CUSTOM
SYSTEM STATUS; CUSTOM
QUALCOMM SECUREBOOT; ENABLE
WARRANTY BIT; 1
BOOTLOADER AP SWREV; 2
I can get to download mode with the three button combo, but i cant flash to stock, when i do it reads
ODIN MODE
PRODUCT NAME; SPH-L710
CURRENT BINARY; CUSTOM
SYSTEM STATUS; CUSTOM
QUALCOMM SECUREBOOT; ENABLE
WARRANTY BIT; 1
BOOTLOADER AP SWREV; 2
SW REV CHECK FAIL ; FUSED 2 > BINARY 1
and in odin it says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_L710VPUCMK3_L710SPRCMK3_2034598_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anyway to fix my phone, ive been trying now for about 3 months to get it, and nothing works
Click to expand...
Click to collapse
what Odin version are you on?? i saw it say Odin 3.....but are you on the latest one?
Like he said what version is your odin? Also i see you are trying to flash MK3. Are you sure the phone does have NDC or ND8?
Sent from my SPH-L710 using XDA Free mobile app
jbnorton0524 said:
Like he said what version is your odin? Also i see you are trying to flash MK3. Are you sure the phone does have NDC or ND8?
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
im using odin 3.07 i have no idea what it is, this is the only restore file i could find, anywhere, im a newbie in this feild
Please halp me!
Look here
Go there for latest software (tar file to flash in odin) and good instructions.
Sent from my SPH-L710 using XDA Free mobile app
jbnorton0524 said:
look here
go there for latest software (tar file to flash in odin) and good instructions.
Sent from my sph-l710 using xda free mobile app
Click to expand...
Click to collapse
it ****ing worked, im so happy, thank you so much
Good deal. Glad i could help.
Sent from my SPH-L710 using XDA Free mobile app
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> J710MNUBU4BRI1_J710MNJDI4BRH1_J710MNUBU4BRI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/025> Odin v.3 engine (ID:25)..
<ID:1/028> Odin v.3 engine (ID:28)..
<ID:0/025> File analysis..
<ID:1/028> File analysis..
<ID:0/025> SetupConnection..
<ID:1/028> SetupConnection..
<ID:1/028> Initialzation..
<ID:1/028> Get PIT for mapping..
<ID:1/028> Firmware update start..
<ID:1/028> sboot.bin
<ID:1/028> cm.bin
<ID:1/028> boot.img
<ID:1/028> recovery.img
<ID:1/028> system.img
<ID:0/025> Can't open the serial(COM) port.
<ID:1/028> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 2)
I am trying to put back the stock firmware on my phone because it has an FRP lock, however odin stopped at the last part. Can someone tell me where I went wrong or what should I do to prevent that error please.
You simply put in your gmail acct, THEN you can flash it.
Sent from my SM-S727VL using Tapatalk
---------- Post added at 08:13 AM ---------- Previous post was at 07:54 AM ----------
calbertrick said:
You simply put in your gmail acct, THEN you can flash it.
Click to expand...
Click to collapse
With frp-lock active, adb obviously hasn't been allowed, so even if the phone is detected, any meaningful data transfer just ain't allowed. RO due to a kind of secure boot.
Sent from my SM-S727VL using XDA Labs