I was installing cyanogenmod but something soft-briked it so I went back and did the unrooting process but this time installed 4.4.2 instead of the older rom. After trying to root I learned that the stock rom I was on patched rooting away. Now I'm stuck and even trying to downgrade I get the following error in odin. All my searching I haven't found anything on how to fix this. Can someone help, all the guides on the forum do not work.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Guess I didn't need to do that, still was able to flash custom rom, thought i lost that ability. Now I only have to worry about the whole flag for warranty
.
Try getting another stock file, what I mean by another I mean find it from xdas s4 thread and a new version of Odin, preferably a older version
Sent from my SGH-M919 using XDA Premium 4 mobile app
I updated my i317M (Telus) via OTA and the next day it rebooted and went into boot loop.
I've tried flashing the phone with 4 different stock roms (from 4.1.2 to 4.4.2) but they all fail.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317MVLBMA3_I317MOYABMA3_I317MVLBMA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried flashing Philz Touch recovery but that fails as well.
I've tried to boot it into recovery mode but it shows a dead Android with error logs like "E:failed to mount"
Help?
goyagoyago said:
I updated my i317M (Telus) via OTA and the next day it rebooted and went into boot loop.
I've tried flashing the phone with 4 different stock roms (from 4.1.2 to 4.4.2) but they all fail.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317MVLBMA3_I317MOYABMA3_I317MVLBMA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried flashing Philz Touch recovery but that fails as well.
I've tried to boot it into recovery mode but it shows a dead Android with error logs like "E:failed to mount"
Help?
Click to expand...
Click to collapse
Try flashing with odin again but before flashing open the tar and remove the bootloader out of it.
Hi, thanks for the reply cnote.
Would the bootloader be sboot.bin or boot.img or both?
thanks again
edit: or rather, how do you remove the bootloader and remake the tar file?
goyagoyago said:
Hi, thanks for the reply cnote.
Would the bootloader be sboot.bin or boot.img or both?
thanks again
edit: or rather, how do you remove the bootloader and remake the tar file?
Click to expand...
Click to collapse
I believe it;s both. Just retrieve the tar file only.
sboot is the bootloader boot.img is the kernel .Have you tried the latest NH2 for your phone also maybe try using a pit file
The nh2 you will have to get from sammobile and the pit file can be found here http://forum.xda-developers.com/showthread.php?t=2609871
Also after odin is finished go into factory recovery and do a factory reset or its just going to sit at the boot screen
flashing pit file also gives an error :S
[Q&A] [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/
Q&A for [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/13 MDL
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/13 MDL. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i did all this to my s4 but now when i boot it, says Kernel Is Not Seandroid Enforcing, Set Warranty Bit
also when i booted the phone the wifi does not work. could you help with this problem?
Samsung Galaxy S4
Is This ''UVUAMDL Official TAR'' for Samsung Galaxy S4?
Ayaz Gill said:
Is This ''UVUAMDL Official TAR'' for Samsung Galaxy S4?
Click to expand...
Click to collapse
Yes
UPDATE: I fixed the issue while posting this, the solution is included. I am hoping by posting this it may help someone having the same problem, because I spent hours and days trying to solve the issue. Sorry the post is so long.
This is my first post.. I am in desperate need of help!
I have searched everywhere, and cannot find any answers really.
I rooted my M919 at one point, and I could not receive OTA updates.
I do not know if it was rooted when I tried to update it with Odin though.
I was in a hurry (I know BIG mistake) and I never wiped my phone or anything before trying to flash the phone.
I think the phone may not be working because I may have not used triangle away before, but I am not sure if I ever used it. I did the root a long time ago.
I have tried changing USB cords, computers, drivers, md5 files, different Odin versions, flashing PIT file, you name it, I have probably tried it
When I boot the phone the currupt recovery screen shows up. Kies will not recognize the phone.
In the left corner it says:
ODIN MODE
...SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
I can still access "downloading" mode, and it says the same as above.
Odin gives me different errors depending on the file I am attempting to flash
The reason I tried flashing the PIT file is because it would sometimes say
I am not completely sure what update I was using before this all happened, but I think it may have been this one, unrooted?:
CF-Auto-Root-jfltetmo-jfltetmo-sghm919.tar.md5
Error codes are as follows:
While flashing 4.4.4 (Odin 3.10)
M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5
JFLTE_USA_TMO_16G.pit
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Recovery File I found (Odin 3.09)
JFLTE_USA_TMO_16G.pit
openrecovery-twrp-2.8.0.1-jfltetmo.tar
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Recovery File I found (Odin 3.09)
JFLTE_USA_TMO_16G.pit
openrecovery-twrp-2.8.0.1-jfltetmo.tar
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
One time I tried using this and it passed!!!
This ONLY works on 3.07 to my knowledge though. It fails on every other Odin
Recovery File I found (Odin 3.07)
JFLTE_USA_TMO_16G.pit
openrecovery-twrp-2.8.0.1-jfltetmo.tar
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The screen is now frozen on the "Samsung Galaxy S4" screen and just shuts off if trying to boot into recovery mode.
If plugged into USB while trying to boot into recovery it launches the recovery file I just flashed!
I went back into download mode, and plugged the phone back in.
I opened Odin 3.07 again, since I had success with the recovery file.
I tried flashing 4.4.4 again M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5
and it failed while only having Auto Reboot checked. I tried launching it with Auto Reboot AND F Reset Time, and it worked!! Hope this helps someone!!
Hi DarkMenace - would it be possible for you to send me signed M919 PIT file as well? Thanks
shaqto said:
Hi DarkMenace - would it be possible for you to send me signed M919 PIT file as well? Thanks
Click to expand...
Click to collapse
Replied to your email. Not sure if I still have it but I may be able to find it if you say it's not there.
alright i did a no no... I tried flashing back to stock odin when my phone was encrypted .. now its softbricked.
everytime i try to flash the stock odin, it always fails at system.img ext4. Need some help guys, its been softbricked for a week. I flashed philz touch twrp on it so I do recovery on it. any ideas?
doesnt work
Bricked my s4/but i had twrp installed to fix it
I'm getting a Fail message in Odin over and over. I've downloaded the .zip twice so I don't think it's an issue with a corrupt file... The .dll is in my Odin folder and everything. Pretty confused and today is my last day to send my phone back into T-Mobile before they charge me.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
asmth00 said:
I'm getting a Fail message in Odin over and over. I've downloaded the .zip twice so I don't think it's an issue with a corrupt file... The .dll is in my Odin folder and everything. Pretty confused and today is my last day to send my phone back into T-Mobile before they charge me.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What version Bootloader/Modems do you have now on the phone? If the version you have now has Knox, then you can't downgrade to MDL.
If you are not sure, you can use this free app: https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
If the version is MK2 or newer, you can't downgrade to MDL.
You can find newer firmwares either on the SamMobile.com site, or on this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Rob
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
In odin, it says 0:[COM4] on the top left
You have 0:[COM3] in your screenshot
Is there a problem or something?Or is it fine?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SGH-M919-UVUAMDB-k0nane.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I get this when i click start
i have a gt-1905 softbricked
please help me
AziNoapte said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SGH-M919-UVUAMDB-k0nane.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I get this when i click start
i have a gt-1905 softbricked
please help me
Click to expand...
Click to collapse
If you have a GT-1905 (which I can't find), you shouldn't be trying to flash FIRMWARE for a T-Mobile phone (SGH-M919). That will brick your phone.
If it is an S4, you should be able to take off the back and look under the battery for the model number.
You can flash ROMs, but not firmware between different S4 models. Try finding the FIRMWARE for your phone, and flash that. Also, verify your model, because GT-1905 isn't a Samsung model number.
You can find firmwares here: http://www.sammobile.com/firmwares/
Rob
rlichtefeld said:
If you have a GT-1905 (which I can't find), you shouldn't be trying to flash FIRMWARE for a T-Mobile phone (SGH-M919). That will brick your phone.
If it is an S4, you should be able to take off the back and look under the battery for the model number.
You can flash ROMs, but not firmware between different S4 models. Try finding the FIRMWARE for your phone, and flash that. Also, verify your model, because GT-1905 isn't a Samsung model number.
You can find firmwares here: ------------To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links--------------
Rob
Click to expand...
Click to collapse
i messed up the writing cuz i was scared
I have 19505
I managed to get to 4.2.2 with konane`s guide,got the stock tar but wifi doesnt work on my S4
Can you help me fix it?
Or if it is impossible, can i upgrade to KitKat?
AziNoapte said:
i messed up the writing cuz i was scared
I have 19505
I managed to get to 4.2.2 with konane`s guide,got the stock tar but wifi doesnt work on my S4
Can you help me fix it?
Or if it is impossible, can i upgrade to KitKat?
Click to expand...
Click to collapse
Since this forum is for the T-Mobile variant of the S4, and I'm not familiar with the GT-I9505, I would suggest you try the forum for that model:
http://forum.xda-developers.com/galaxy-s4
If you flashed a T-Mobile tar to your I9505, it is probably because of the radio/modem which was designed for the T-Mo model. There should be links in that forum about no WiFi, etc.
Rob
Hello gang. Got a new circuit board installed two weeks ago. Got the phone back, started setting it up, and after about an hour the touchscreen quit working. >8\
I emailed the shop and they said "could be because you're rooted."
Smelled like bull**** to me, but giving them the benefit of the doubt I figured I'd try to flash back to stock. (Which I WAS actually stock, I had the 4.4.4 OTA update, and then rooted and de-bloated.)
Anyway, I downloaded the "Stock firmware" (SGH-M919-UVUAMDB-k0nane.tar.md5) from post 1 in the title thread and flashed it with Odin.
SEEMS to be working, but oddly enough I have a M919UVUFNH7 baseband and bootloader, but Android 4.4.2, which based on my reading, should be impossible?
Also, like several other posters, I have no wifi.
In any event, I am currently downloading the NH7 firmware from sammobile. Says 2 hours to go.
Will try to flash that with Odin and we'll see what happens. Anyone have suggestions in the meantime?
OK - follow-up. I downloaded M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar and flashed it with Odin. Even though Odin said "Boot" and "Modem" in the flashing process, I still seem to have NH7 bootloaders and baseband.
Help?
Well, never mind. I don't care anymore. Tried to replace my glass and cracked the digitizer. Dunno if I'm down to drop another $120 on this thing now.
$300 purchase price
$100 circuit board replacement
$12 glass
Now $120 for a display? I might just call knock it off with this thing.
This was originally posted in the wrong forum. My apologies.
So after following this link: http://www.cnet.com/how-to/how-to-ro...ung-galaxy-s3/ I have a bricked device.
No matter what I do, Odin seems to fail. This is what I think caused the problem in the first place. Also there is the possibility that the guide is way out of date.
So I was wondering if anyone had any advice on how to proceed? The device isnt mine and this isnt my first time rooting a device. I just have never bricked anything before.
Here is the log from ODIN from recreating the process in the link above
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Here is the Log from ODIN from my latest attempt to flash something at it.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_ATT_I747UCDLK3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried flashing a full image, but it gives this error
Code:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried flashing the "stock" image.
Going to try a different PC tomorrow and hope that I get a different result.
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have an i747 or u747m? Do not flash any more ROMs without knowing the bootloader version installed on your phone. If you phone has a 4.3 or newer bootloader and you try to downgrade it, it will brick your phone.
I recommend that you install the latest version of Philz and flash cm10.2 for the d2att to at least get your phone running so you can determine the bootloader.
audit13 said:
Do you have an i747 or u747m? Do not flash any more ROMs without knowing the bootloader version installed on your phone. If you phone has a 4.3 or newer bootloader and you try to downgrade it, it will brick your phone.
I recommend that you install the latest version of Philz and flash cm10.2 for the d2att to at least get your phone running so you can determine the bootloader.
Click to expand...
Click to collapse
SGH-i747
And the issue I am encountering is a bit bigger than that, I cant install anything. I cant even flash the stock .tar file I found. I cant get ODIN to do anything except fail? I never even got CWM installed.
Can you get into download mode and stay in download mode?
There is not stock tar.md5 ROM you can flash from sammobile because AT&T never made a stock ROM available after 4.1.1.
Did you try to flash Philz Touch for the d2lte in Odin 3.07 using his tar.md5 recovery file? What about TWRP?
No TWRP either?
Can you provide me a link to that MD5
After digging up the MD5 I have got the phone booting again.
Thank you so much for all your help!
I just got this AT&T version of the Note 8 from a buddy, and am having a hard time flashing to CM13 6.0.1 with Odin 3.10.7. I have it rooted, but every time I try to flash the I467M_BNF5_BNF5.tar.md5 file, it fails. This is what I am getting:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> tz.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I feel like I am forgetting to do something trivial, so any help would be much appreciated
That has a locked bootloader. There is no custom recovery for that model. So roms are a no go on the ATT version.
Ah damn. I don't even want the phone part of it. I was trying to speed it up a little bit and get some customization options. I guess I can't be too angry because I only paid $75 for it and he had some pictures of his ex leftover on there. Thanks man