Develop Bugs

[Q] htc EVO 4g THIN case: protection for camera + lcd

i've been looking around for a thin case for my new evo.
i just ordered a barely there case b/c it was the thinnest with camera protection. all the cases i've read about or see online do one or the other. either protect the camera or add too much bulk in the front (or doesn't protect the camera lens).
has anyone found a case that has a slight "lip" to protect the lcd when laying it down lcd down AND also covers up the camera "ring" when laying it down camera down?
or is this just too much to ask?

The Incipio Edge is probably the thinnest that provides both protections. I had the Seidio Innocase for a while, it was rather thin and protected both. I just wish the Edge and the Barely There came in colors other than pink and black. I really don't want my phone to look like a Hot Topic fat chick circa 2002.

I don't know if the Ringke Rearth cases add bulk but they definitely have a lip to protect the lcd and also have your camera covered.
I used to use the barely there, but I stopped because I got an extended battery, and will not be going back to it because I don't like that it creates tiny scratches on the sides.

I have an Amzer tpu argyle case. Its very nice, good fit, rubbery bit not sticky, face and camera protection. Found it at amazon for about $10. It looked semi-scuffed when I opened it but I cleaned it with windex amd after a couple days the scuffs dissapeared

metalfan78 said:
I have an Amzer tpu argyle case. Its very nice, good fit, rubbery bit not sticky, face and camera protection. Found it at amazon for about $10. It looked semi-scuffed when I opened it but I cleaned it with windex amd after a couple days the scuffs dissapeared
Click to expand...
Click to collapse
You can also grab them on ebay too. I have a TPU case on my EVO, it is perfect.

Mindspin_311 said:
You can also grab them on ebay too. I have a TPU case on my EVO, it is perfect.
Click to expand...
Click to collapse
Can you please share with a url to ebay to what your case looks like? I'm interested, thanks!

ro_bro said:
Can you please share with a url to ebay to what your case looks like? I'm interested, thanks!
Click to expand...
Click to collapse
Anything on this page will suffice
http://shop.ebay.com/?_from=R40&_tr...kw=htc+evo+tpu+case&_sacat=See-All-Categories
I personally have this one, it fits great.
http://cgi.ebay.com/Smoke-TPU-Rubbe...957108?pt=PDA_Accessories&hash=item2eb4271a34

+1 Seidio Innocase II Suface

Double....

I used this case for a while before getting a hard one. I thought it protected the phone pretty well.

Mindspin_311 said:
Anything on this page will suffice
http://shop.ebay.com/?_from=R40&_tr...kw=htc+evo+tpu+case&_sacat=See-All-Categories
I personally have this one, it fits great.
http://cgi.ebay.com/Smoke-TPU-Rubbe...957108?pt=PDA_Accessories&hash=item2eb4271a34
Click to expand...
Click to collapse
Nice case. Thanks

has anyone found a case that has a slight "lip" to protect the lcd when laying it down lcd down AND also covers up the camera "ring" when laying it down camera down?
The Rearth Rinke case is what you're looking for. Protects both the camera and lcd. Only adds about 2mm to the width of the phone. Fit, finish and attention to detail are perfect. Even a cutout for the HTC logo on the back. Not flimsy on the sides like the Otterbox Impact.

has anyone found a case that has a slight "lip" to protect the lcd when laying it down lcd down AND also covers up the camera "ring" when laying it down camera down?
The Rearth Rinke case is what you're looking for. Protects both the camera and lcd. Only adds about 2mm to the width of the phone. Fit, finish and attention to detail are perfect. Even a cutout for the HTC logo on the back. Not flimsy on the sides like the Otterbox Impact.

natethedog said:
has anyone found a case that has a slight "lip" to protect the lcd when laying it down lcd down AND also covers up the camera "ring" when laying it down camera down?
The Rearth Rinke case is what you're looking for. Protects both the camera and lcd. Only adds about 2mm to the width of the phone. Fit, finish and attention to detail are perfect. Even a cutout for the HTC logo on the back. Not flimsy on the sides like the Otterbox Impact.
Click to expand...
Click to collapse
Check out the ebay cases I posted

TPU w/ Aluminum Bumper? What?

Has anyone purchased a case like this? I am assuming that it is a TPU case with an aluminum bezel thingy around the outside. I would like to see it on a phone to see how much thicker it makes the phone (it looks to be a very thin alternative to a full aluminum bezel). I also am curious as to if it is actually TPU or another material. Thoughts?
http://www.ebay.com/itm/Blue-Samsun...ccessories&hash=item231edaa84b#ht_1465wt_1071
P.S. It is also fairly cheap.

It doesnt mention that its TPU.
To me, it looks like a plastic back. I think that if it fell, the clips would break that hold the back to the aluminum.

ImARaptor said:
Has anyone purchased a case like this? I am assuming that it is a TPU case with an aluminum bezel thingy around the outside. I would like to see it on a phone to see how much thicker it makes the phone (it looks to be a very thin alternative to a full aluminum bezel). I also am curious as to if it is actually TPU or another material. Thoughts?
http://www.ebay.com/itm/Blue-Samsun...ccessories&hash=item231edaa84b#ht_1465wt_1071
P.S. It is also fairly cheap.
Click to expand...
Click to collapse
looks like aluminum and polycarbonate to me, I doubt it's TPU. TPU isn't brittle enough to clip like that, which is why you don't see many TPU cases for slider phones.

That would be sweet though if it were made with TPU along the back with that bezel. Looks nice.

Wond3r said:
I think that if it fell, the clips would break that hold the back to the aluminum.
Click to expand...
Click to collapse
That was my first thought as well!
Sent from my phone. Prepare for atrocious Swype typos.

Cases for the Bamboo OPO

I own a OnePlus One with the Bamboo back and as most people already know, it's actually quite thicker than the normal sandstone black and silk white backs and also a bit heavier. Because of this, most cases won't fit. I already tried putting on a naked clear case but my phone was too thick. Hopefully others with the Bamboo back could post here what cases would fit so we can put together a sort of list of confirmed cases that fit the Bamboo OPO.

kylethelife said:
I own a OnePlus One with the Bamboo back and as most people already know, it's actually quite thicker than the normal sandstone black and silk white backs and also a bit heavier. Because of this, most cases won't fit. I already tried putting on a naked clear case but my phone was too thick. Hopefully others with the Bamboo back could post here what cases would fit so we can put together a sort of list of confirmed cases that fit the Bamboo OPO.
Click to expand...
Click to collapse
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?

nicholaschum said:
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
Click to expand...
Click to collapse
Wow! That's solid helpful. The one I wanted to get but didn't fit when I tried it on was the Bepak Slim Transparent Case so stay away from that if you've got the bamboo. I really wanted a clear case coz I didn't want to cover the Bamboo but after trying the Bepak case I didn't think any slimfit clear case would fit. Glad to hear the Ringke Fusion Case fits! Do you have the clear one? I think I might just order one.

nicholaschum said:
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
Click to expand...
Click to collapse
Sorry, can I just confirm, is the Aluminium Case you mention first the one by kwmobile/KW-Commerce? And, if it is, you say you wouldn't choose it because of potential scratching, but do you think it's still a good case in that it protects the screen from being damaged?

TheMurphmeister said:
Sorry, can I just confirm, is the Aluminium Case you mention first the one by kwmobile/KW-Commerce? And, if it is, you say you wouldn't choose it because of potential scratching, but do you think it's still a good case in that it protects the screen from being damaged?
Click to expand...
Click to collapse
Yeah because that case is actually already very snug on the sandstone version of the OnePlus, with the added thickness at the back, it will scrape along the plastic and the bamboo (I had a lot of experience with aluminium bumpers with added thickness battery covers (Note 3 + Al bumper + Al battery cover) and the battery cover was scratches so much). It will protect your screen somehow (I did drop my sandstone OPO with a tempered glass on solid concrete and it was perfectly fine)

nicholaschum said:
Yeah because that case is actually already very snug on the sandstone version of the OnePlus, with the added thickness at the back, it will scrape along the plastic and the bamboo (I had a lot of experience with aluminium bumpers with added thickness battery covers (Note 3 + Al bumper + Al battery cover) and the battery cover was scratches so much). It will protect your screen somehow (I did drop my sandstone OPO with a tempered glass on solid concrete and it was perfectly fine)
Click to expand...
Click to collapse
Thanks for the information; think I'll give that one a miss then and go for the Tudia Ultra Slim instead

nicholaschum said:
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
Click to expand...
Click to collapse
strongly disagree. I'd recommend Orzly Fusion bumper case. The fit is perfect, not too tight. Fits perfectly round the edges and definitely not loose on the 'lay-on-the-table' part. I also own Ringke & Diztronic.
Im pretty sure u got a bad batch of the Orzly, or maybe an early batch...

Sagar4995 said:
strongly disagree. I'd recommend Orzly Fusion bumper case. The fit is perfect, not too tight. Fits perfectly round the edges and definitely not loose on the 'lay-on-the-table' part. I also own Ringke & Diztronic.
Im pretty sure u got a bad batch of the Orzly, or maybe an early batch...
Click to expand...
Click to collapse
I would not, my two cases I ordered one month apart are exactly what KP Smith said in a comment here:
https://plus.google.com/u/0/app/basic/stream/z13awxcpole1eh1tf22uihs51zrfd3ssp
Sent from my Nexus 6 using Tapatalk VIP

Vassy's One+

Thank you for doing this review. Your post makes me want to try the TUDIA Ultra Slim LITE TPU Bumper.
Saw this review on it.
youtu.be/cd1O8LdeGUo

my diztronic tpu slim cases fit pretty good as well. you put them on like you would with the regular back then just run your fingers around the edges and it falls right into place. I have 4 different colors from different batches and all fit fine. I also have the ringke fusion.. its actually on my phone right now. Its got the clear back and tinted sides. Fits 99.9% perfectly! Its my go to case for sure.

anyone tried the AMZER BLACK PUDDING TPU case ?

looks like a case with good drop protection
http://www.ebay.com/itm/AMZER-BLACK...L-/121649568822?ssPageName=ADME:B:BOC:US:1123

This one is great!!! http://m.ebay.com/itm/281684193800?varId=580689263837&txnId=1374093401018

bloodomen2 said:
looks like a case with good drop protection
http://www.ebay.com/itm/AMZER-BLACK...L-/121649568822?ssPageName=ADME:B:BOC:US:1123
Click to expand...
Click to collapse
I just got this case yesterday, I ordered on May 5th and I received it on May 13th. Very fast shipping from US to Canada. Case looks and fits nicely, the edges are glossy but the back of the case has a nice matte finish with that "Amzer" logo. As for drop protection, It would probably survive, but keep in mind that the case is very thin (about 1 mm thick on all sides). It's not like an Otterbox case, but I prefer these types of thinner cases.
These are one of the nicest ones available right now besides the generic unbranded tpu cases, and I'm also waiting for this one to come in the mail: http://www.ebay.ca/itm/C1-NILLKIN-N...t=LH_DefaultDomain_0&var=&hash=item35e86b1904

I ordered this case a couple of days ago and will be making a quick review on it as soon as I get it via YouTube. I feel like there's a lack of cases or information on this phone and I want to contribute.
Sent from my ASUS_Z00AD using XDA Free mobile app

lordpipa said:
This one is great!!! http://m.ebay.com/itm/281684193800?varId=580689263837&txnId=1374093401018
Click to expand...
Click to collapse
i dont like the generic rugged cases their materials feels too cheap and flimsy
i usually buy UAG cases for my devices

KevOne said:
I just got this case yesterday, I ordered on May 5th and I received it on May 13th. Very fast shipping from US to Canada. Case looks and fits nicely, the edges are glossy but the back of the case has a nice matte finish with that "Amzer" logo. As for drop protection, It would probably survive, but keep in mind that the case is very thin (about 1 mm thick on all sides). It's not like an Otterbox case, but I prefer these types of thinner cases.
These are one of the nicest ones available right now besides the generic unbranded tpu cases, and I'm also waiting for this one to come in the mail: http://www.ebay.ca/itm/C1-NILLKIN-N...t=LH_DefaultDomain_0&var=&hash=item35e86b1904
Click to expand...
Click to collapse
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition

bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
Yes, it does have a lip that covers that entire phone, it keeps the screen at least 1 mm off the ground when you put it face it down. And yeah, I can't wait for that Nillkin case, it covers everything on the phone from the headphone jack, volume buttons and charging port. Everything except the camera

bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
I have this case, which I feel matches the nillkin tempered glass screen protector very well. (looks like they may be OOS for the ZF2)

I received the Amzer case two days back. I'm not too happy with the case and wouldn't recommend it to anyone.
The pros are...
1. It covers all the sides and has a lip the protects the screen.
2. The buttons have neat cutouts.
3. The back is a nice Matt finish.
The cons are...
1. The case is slightly loose on the lower side near the USB port.
2. The sides have an unfinished sharp edge running across all 4 sides. This spoils the feel of the case when you hold it in your fingers.
3. Glossy sides spoil the look and make it look cheap.
4. On two sides there's a small extrusion that looks like an unfinished factory flaw from the moulding process.
In the past I have used TPU cases from vendors like Diztronic and I have to say the quality of those cases was way better. For the price Amzer is charging for this case they should have delivered a quality product.

I got this case from eBay UK:
http://www.ebay.co.uk/itm/301580146391?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
And I can recommend it. Cutouts are good, it's slim but still just overhangs the screen to protect it. In fact, you hardly notice it when it's on.

bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.

alose said:
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
Click to expand...
Click to collapse
I received mine today. It has already become my favorite of four cases I have received thus far (Nilkin, Amzer, Sparin, Einzige).

alose said:
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
Click to expand...
Click to collapse
So this case covers the buttons on the phone? All the other cases just leave a cutout, which i imagine would make them hard to press.

cmendonc2 said:
So this case covers the buttons on the phone? All the other cases just leave a cutout, which i imagine would make them hard to press.
Click to expand...
Click to collapse
Yes the case covers the buttons, and are easy to press. The power button is actually easier then without a case.
I have another TPU case and has cutouts. The volume buttons are still accessible with that one, but the power button is a real pain to press.

just received the nillkin tpu case
very nice case for the price its well built barely adds any bulk and provide decent protection

The original Asus case seems good, with textured finish that should give good grip:
http://www.bhphotovideo.com/c/product/1147172-REG/asus_90xb00ra_bsl2n0_bumper_case_for_zenfone.html
I haven't ordered it yet, but so far is my first consideration. It seems better than other cheap TPU cases I've looked at. as most of them seem to have a smooth finish and seem slippery. I also don't like the "shiny" look most of these TPU cases have.

I ordered this one grey
For ASUS ZenFone 2 ZE551ML ZE550ML Dual Layer Plastic And Silicone Case For ZenFone2 5.5INCH Armor Hybrid Combo Phone Case
http://www.aliexpress.com/item/For-...ne-Case-For-ZenFone2-5-5INCH/32362634172.html
(from AliExpress Android)

onesky said:
I ordered this one grey
For ASUS ZenFone 2 ZE551ML ZE550ML Dual Layer Plastic And Silicone Case For ZenFone2 5.5INCH Armor Hybrid Combo Phone Case
http://www.aliexpress.com/item/For-...ne-Case-For-ZenFone2-5-5INCH/32362634172.html
(from AliExpress Android)
Click to expand...
Click to collapse
Sweet....looks like a non-spigen made slim armor....just might be what i need!

Slimmest case that has camera protection?

Basically just what the title asks. Can anyone point me to the slimmest case available that offers some protection for the camera? Thanks in advance.

pieces of cake said:
Basically just what the title asks. Can anyone point me to the slimmest case available that offers some protection for the camera? Thanks in advance.
Click to expand...
Click to collapse
I am using the Spigen one. I think it is the slimmest that still protects for the camera bump.
Sent from my LG-LS997 using Tapatalk

I went through quite a few cases and ended up purchasing the Nillikin case and absolutely love it. I needed a case with added grip and some camera protection.
https://www.amazon.com/dp/B01MAZLX5R/ref=cm_sw_r_cp_apa_B-poybKTP18S5
It does not protect the top and bottom like many snap on cases but is thin and has a raised area around the camera. I'd be comfortable laying the phone on a flat surface now. I have the spigen rugged armor which is thicker and protects the entire phone.

utbiglall said:
I went through quite a few cases and ended up purchasing the Nillikin case and absolutely love it. I needed a case with added grip and some camera protection.
https://www.amazon.com/dp/B01MAZLX5R/ref=cm_sw_r_cp_apa_B-poybKTP18S5
It does not protect the top and bottom like many snap on cases but is thin and has a raised area around the camera. I'd be comfortable laying the phone on a flat surface now. I have the spigen rugged armor which is thicker and protects the entire phone.
Click to expand...
Click to collapse
Looks sweet. Thanks.

Can't comment on Nillkin or Spigen cases, never had them. I went Ringke Fusion on the LG G4 and have never looked back. Received my v20 case today (clear/smoke) and put it on. It's VERY marginally recessed compared to where the camera bump is. Is perfectly flat/balanced on an even surface, so you can operate the phone one-handed on the desk if you need to.
My recommendation is to leave the plastic film on the back of the phone where the camera is, any protection you can give it without affecting photo quality will help. I just need a good screen protector now...
Hope that helps.
RoOSTA

pieces of cake said:
Basically just what the title asks. Can anyone point me to the slimmest case available that offers some protection for the camera? Thanks in advance.
Click to expand...
Click to collapse
I'm using the Encased Slim Shield... I like it. Thin, covers everything (camera protrusion as well), fits perfectly, & feels nice in the hands.

Kief_haring said:
I'm using the Encased Slim Shield... I like it. Thin, covers everything (camera protrusion as well), fits perfectly, & feels nice in the hands.
Click to expand...
Click to collapse
Looks really nice. Thanks for your input.

pieces of cake said:
Looks really nice. Thanks for your input.
Click to expand...
Click to collapse
Nillkin also makes one that is a TPU case. I had it on my N6P & it was really nice. I opted for the Encased this time because I wanted a hard case, TPU never keeps it's full shape after a while..

Spigen... very nice case

Spigen rugged armor.. it's thin, nice looking and protects all that is needed
http://www.spigen.com/collections/lg/products/rugged-armor-lg-v20-case

I tried the Spigen Liquid Crystal Case and it is the most minimalist but doesn't have enough protection in my opinion.
I ended up returning it not for that reason, but due to the "yellow" tone of the case itself...I contacted Spigen and they are looking into replacements.
I purchased the Ringke [Fusion] Clear PC Back TPU Bumper in Smoked Black...perfect fit and better protection that looks great with the Titan V20.
https://www.amazon.com/gp/product/B01K5I9IKE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
View attachment 3953115

If you want something with protection while being slim, I'd suggest the UAG LG V20 Plasma Feather-Light Rugged. Been using it since I got my V20 and it's slim and light with plenty of grip, originally I thought that it'll be big and bulky like the OtterBox cases but it's slim enough and knowing it's UAG you don't really have to worry about protection. Even tho it's pricy it's worth it.

You can consider using the Verus crystal bumber case, this and others like spigen to name a few are your only option, just keep the protection film on for added protection, for me I also added a tempered glass protector for both camera lens without any affect what so ever.

utbiglall said:
I went through quite a few cases and ended up purchasing the Nillikin case and absolutely love it. I needed a case with added grip and some camera protection.
https://www.amazon.com/dp/B01MAZLX5R/ref=cm_sw_r_cp_apa_B-poybKTP18S5
It does not protect the top and bottom like many snap on cases but is thin and has a raised area around the camera. I'd be comfortable laying the phone on a flat surface now. I have the spigen rugged armor which is thicker and protects the entire phone.
Click to expand...
Click to collapse
I ended up buying this case. It arrived today and my search is now over. There's simply no way a V20 case could be slimmer than the Nillikin while still offering camera protection. It's awesome. EXACTLY what I was looking for, so thank you!
The top and bottom are protected well enough with the lip extensions on each end.

I bought this off aliexpress, and it's pretty great. perfect fit and some improvement in grip.
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=6497&page=1
downside is, it's glossy and quite the fingerprint magnet especially in a humid country like SG, and the alignment is slightly off for the fingerprint/home button.
otherwise, the port covers are awesome and it'll definitely prevent the lint buildup.
looking to get a tempered glass next.
also, for SG sets, it comes with a promotional pack of 3 back protectors and 2 iRing and a screen protector. will upload pictures soon!

pieces of cake said:
I ended up buying this case. It arrived today and my search is now over. There's simply no way a V20 case could be slimmer than the Nillikin while still offering camera protection. It's awesome. EXACTLY what I was looking for, so thank you!
The top and bottom are protected well enough with the lip extensions on each end.
Click to expand...
Click to collapse
I agree, one of the thinniest case around with the best protection, the case has a built in dust cap for both the charging port and headphone socket.

kms108 said:
I agree, one of the thinniest case around with the best protection, the case has a built in dust cap for both the charging port and headphone socket.
Click to expand...
Click to collapse
I'm guessing you have no idea who you were quoting there, eh?

pieces of cake said:
I'm guessing you have no idea who you were quoting there, eh?
Click to expand...
Click to collapse
Actually it was you who I quoted, but I though you went for the tpu one by nillkin, not the hard case, so yes, it was a mistake on my part.

The Spigen Rugged Armor. 12 bucks on Amazon.

Evocell $10 or less. 3 layered case with holster. Thin and protective. Found on Amazon. Search Evocell LGV20.
Sent from my LG-H918 using Tapatalk