Develop Bugs

TPU Case Review for I9100

I just got this case from eBay for around $5 USD and I am so impressed with it I had to write a quick review. I think the name brand is Fusion.
-The fit of the case is just perfect. Very snug.
-The thickness is just enough to protect the camera lens and screen without adding much bulk.
-The sides of the case have a nice texture to make it very easy to grip.
-The TPU material doesn't attract lint and is very easy to slide in and out of your pocket.
-All of the holes match up fine.
-The buttons on the sides of the phone are covered but in my opinion this makes the pressure required just right so you don't accidentally press them.
The only negative at all is that the hole for the headphone jack may be too small for some plugs. The Samsung headphones and my Bose headphones fit just fine though. (Update: My Bose speakers I had to trim a little plastic off of the audio cable but it fits fine now.)
Here is the eBay link if anybody wants one. This guy shipped one to me in 2 days in the US.
http://cgi.ebay.com/Clear-Fusion-Samsung-Galaxy-S2-i9100-TPU-COVER-CASE-/260780906673?pt=PDA_Accessories&hash=item3cb7c0d8b1

If you're willing to wait a few days more, you can get them for 2,5$ in Dealextreme.

I have exactly the same one, purchased for £2.95 off ebay in the UK, and I would agree with all the points outlined above.

bought two of them from Dealextreme, but in black color, best TPU

Do they make them in matte black?

I ordered a similar one from eBay on the 14th, and it arrived today. Fits pretty well and leaves a bit of a bumper around the display, adding a bit of protection.

bmstrong said:
Do they make them in matte black?
Click to expand...
Click to collapse
I believe I saw a matte black on Dealextreme. Most of the black ones I've seen are part matte, part glossy.
http://www.amazon.co.uk/SAMSUNG-GALAXY-SCREEN-PROTECTOR-ACCESSORIES/dp/B004WO6ISI/ref=sr_1_23?s=electronics&ie=UTF8&qid=1306245039&sr=1-23

The thickness is just enough to protect the camera lens and screen without adding much bulk.
Click to expand...
Click to collapse
Hard to tell from the image, but isnt that simply a hole in the case where they camera lense is, so offers no protection for the lens at all??
Its an impossible task trying to find a case that offers protection for the camera.. they are so hi spec and good quality these days, the last thing you want is muck or scratches on the optics.. surely a case designer can be innovative enough to design some sort of sliding cover....

I purchased the Black one as well. However, the glossy part scratches too easily. Handle with care.

Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.

Artius89 said:
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Click to expand...
Click to collapse
It's true, that was my experience with this TPU case as well. Dust would pile up on the edges of the screen and under the TPU lining. I'd have to constantly take off the TPU case and wipe the screen to keep my SGS2 nice and pretty. With the official Samsung vent case i can simply wipe the screen clean in one go without taking off the case. Sure, the official case offers less protection, but it also preserves the form and weight of the phone quite well, whereas the TPU case adds significant weight and thickness to the phone in comparison.

I just got a few of these delivered from buyaccess. Delivered in a week and they fit like a glove. Nice ridge around the screen so it won't scratch if you put it face down and extra grip on the sides.
€2 each and free shipping you cannot go wrong. Link to the sellar if anybody wants it.
http://myworld.ebay.ie/buyaccess/?_trksid=p4340.l2559

i am using nillkin tpu case ，absolutely good awesome。I was driving motorbike in raining day.made my hand wet and glutinous 。then using my phone，that is feeling good。not like some case make your hand oily
http://www.ebay.co.uk/itm/150635443...43813&_sacat=See-All-Categories&_fvi=1&_rdc=1

[REVIEW] - Nillkin Cases

Got my case in - Short review of TPU case here:
http://forum.xda-developers.com/showpost.php?p=25346439&postcount=33
Supaiku did a short review of the hard case and TPU here:
http://forum.xda-developers.com/showpost.php?p=25205840&postcount=21
---------------------
TPU:
http://www.ebay.com/itm/Nillkin-Sof...ccessories&hash=item1e6d42d288#ht_5625wt_1163
Hard Shell:
http://www.ebay.com/itm/Nillkin-Har...ccessories&hash=item4d0039a6ec#ht_8581wt_1139

these cases look really nice, i might have to buy one to try.

bought one thanks for the heads up !

Ordered one of each, thanks for the heads up.
THE PRIME GT-I9250

I ordered the TPU case. I read some reviews of Nillkin cases in the other phone forums and they were very good.

I ordered one but cancelled after they quoted 3-6 weeks delivery time! I don't know what's going on with China these days, the last few times I ordered things it took forever. They do look beautiful - the textured back looks grippy.

Had a couple of Nillkin cases for my SGS2 they were fine. These should be as good as those.

How come the TPU has no cutout for the volumerocker?
What advantages has the TPU over the hardcase?

gkhn said:
How come the TPU has no cutout for the volumerocker?
What advantages has the TPU over the hardcase?
Click to expand...
Click to collapse
TPU case is similar to a "gel" or silicone case. I like it because it covers the top and bottom of the phone where the hardcase doesn't

I just bought a One X and two cases:
Nillkin TPU and hard case.
I hope everything will arrive today! But maybe just this weekend
I would image the TPU cases don't have cutouts because you don't need a cutout with such soft rubber. But that's just a guess. (for now!)

gkhn said:
How come the TPU has no cutout for the volumerocker?
What advantages has the TPU over the hardcase?
Click to expand...
Click to collapse
Probably no cutout because you can press them through a case.
In order to protect your phone when you drop it, a case has to slow your phone down gradually and absorb the force of the impact when it hits the pavement which is what a soft case does. A hard case just transfers that force straight to the phone so they're almost useless if you drop it. Hard cases are for preventing scratches only... but then if you get a grain of sand inbetween the case and the phone, it will make more scratches than if you didnt have it.

Mischaseb said:
Probably no cutout because you can press them through a case.
In order to protect your phone when you drop it, a case has to slow your phone down gradually and absorb the force of the impact when it hits the pavement which is what a soft case does. A hard case just transfers that force straight to the phone so they're almost useless if you drop it. Hard cases are for preventing scratches only... but then if you get a grain of sand inbetween the case and the phone, it will make more scratches than if you didnt have it.
Click to expand...
Click to collapse
And a TPU case prevents the grain of sand getting there?
Also i'm guessing that if you press the rocker through the case you won't feel any 'click'?

some TPU cases have the click feel to it and some have a thicker TPU casing which doesn't have the click feel. I purchased a TPU case off of HandheldItems and the power/volume buttons all have a click feel to them.

gkhn said:
And a TPU case prevents the grain of sand getting there?
Click to expand...
Click to collapse
Probably a better chance than a hard case since the soft cases tend to wrap around the phone more completely, and end up flush against the phone body with no gap.

http://www.netimes.com/shop/nillkin™-super-shield-shell-set-for-htc-one-x-p-3943.html?cPath=80_879
Nillkin case.

i got a nillkin hard case in white and i have to say its quite nice. It may look like an ordinary case but the back of it is textured with grip and the sides are glossy and shiny like the one X. It raise the back of the phone very slightly so the camera lens doesn't get scratched easily. for under 20bucks i must say im quite impressed with it. it comes with a screen protector which i haven't tried to put on since i suck at it and a tiny cleaning cloth.

Ordered hard case two days ago.

I just ordered the black TPU case. Will let y'all know when it arrives and if it is worth the purchase.

nanoo-eg said:
http://www.netimes.com/shop/nillkin™-super-shield-shell-set-for-htc-one-x-p-3943.html?cPath=80_879
Nillkin case.
Click to expand...
Click to collapse
I ordered this yesterday, but now I wonder: Is this a hard case or a silicon case?

EvertorN said:
I ordered this yesterday, but now I wonder: Is this a hard case or a silicon case?
Click to expand...
Click to collapse
Hard case. There is a cutout for the volumerocker.
Edit: typo, my baaadd! Hard case has a cutout .

Good Cases?

What are some good cases for the phone?

I really like my Nillkin Natural TPU case. there are a couple of other threads with cases and pics.

that clear right? doesn't that interfere with flash when taking pictures?

Nilkin Frosted Shield case recommended.
http://www.ebay.com/itm/20134158223...49&var=500540193931&ssPageName=STRK:MEBIDX:IT

I have both of these cases as well, and they are both excellent choices. I wish the clear case was a tad thicker, but I like that my phone's back cover is viewable through the clear case (so pretty!) and it doesn't add extra bulk.
Unlike some silicon cases, it has a smooth finish that won't stick to your pocket (it also might slide out of your hand easily enough, if your hand is damp).
There is a cutout for the flash, so I've not noticed any issues with it. The covers for the headphone jack and usb connector are a nice touch as well, but the usb cover on mine seems to not want to sit completely flush. Not a huge deal to me, even with OCD.
I like that the clear case covers the bottom edge of the phone, whereas the matte case leaves it exposed. The bottom edge of my phone already seems to have some wear because of the exposure.
That said, I really do like the feel and color of the matte case (I have red), and it fits a little more snugly that the clear case, IMHO.
I'd like to see a heavier duty case, something like a Griffin Survivor style case with 2-part rubber and hard plastic component. Unfortunately for now, the Nillikin cases aren't going to afford your phone much more than scratch protection but they are nice to hold and are better than nothing! Definitely pair with a nice tempered glass screen protector, if you can find one that fits well, that is...

bgibson72 said:
I have both of these cases as well, and they are both excellent choices. I wish the clear case was a tad thicker, but I like that my phone's back cover is viewable through the clear case (so pretty!) and it doesn't add extra bulk.
Unlike some silicon cases, it has a smooth finish that won't stick to your pocket (it also might slide out of your hand easily enough, if your hand is damp).
There is a cutout for the flash, so I've not noticed any issues with it. The covers for the headphone jack and usb connector are a nice touch as well, but the usb cover on mine seems to not want to sit completely flush. Not a huge deal to me, even with OCD.
I like that the clear case covers the bottom edge of the phone, whereas the matte case leaves it exposed. The bottom edge of my phone already seems to have some wear because of the exposure.
That said, I really do like the feel and color of the matte case (I have red), and it fits a little more snugly that the clear case, IMHO.
I'd like to see a heavier duty case, something like a Griffin Survivor style case with 2-part rubber and hard plastic component. Unfortunately for now, the Nillikin cases aren't going to afford your phone much more than scratch protection but they are nice to hold and are better than nothing! Definitely pair with a nice tempered glass screen protector, if you can find one that fits well, that is...
Click to expand...
Click to collapse
Yeah, I'm waiting for a decent rubber-hard plastic case to come out for me to use. A cheaper one should hold till then.

nekrosoft13 said:
What are some good cases for the phone?
Click to expand...
Click to collapse
Window case relly a good choice!

The Rearth Ringke Fusion case is very good, fits well, I find it comfortable and of a durable material. Helps with the power button as the case plastic makes it pop out a bit and it can be pressed with a lot of ease.
Here is the link if you want to see it.
http://www.amazon.com/ASUS-ZenFone-5-5-Inch-Case/dp/B00XNSIYTU
Sent from my ASUS_Z00AD using XDA Free mobile app

zixen15 said:
The Rearth Ringke Fusion case is very good, fits well, I find it comfortable and of a durable material. Helps with the power button as the case plastic makes it pop out a bit and it can be pressed with a lot of ease.
Here is the link if you want to see it.
http://www.amazon.com/ASUS-ZenFone-5-5-Inch-Case/dp/B00XNSIYTU
Sent from my ASUS_Z00AD using XDA Free mobile app
Click to expand...
Click to collapse
I've read there are issues with the Rearth Ringke Fusion case and the camera's flash. Have you experienced problems in that area?

The Ringke clear case creates a nasty halo on photos whenever you use the flash --- much worse than the Nilkin (halo is barely visible). I still prefer it over the Nilkin case because it feels much sturdier: like it'll actually protect my phone *if* I drop it. It doesn't have a USB port cover on it unlike the Nilkin, though.
The Nilkin case just feels too flimsy for my tastes. I also don't use the flash on mobile phones anyway... most of them are too harsh.
If you really want a subtle highlight when taking photos, have someone else use their mobile's torch app to shine on your subjects

I have this case and it's good. I did a review of it too. Very sturdy and not glossy so firm in hand. Comes with a screen protector $10 buck is a great deal!
http://www.amazon.com/gp/product/B00S0BBFTQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
If you want a wallet case try this. $3.99 with promo code ASUSZEN2. I purchase one myself too.
http://www.amazon.com/gp/product/B00Y14WRCU?psc=1&redirect=true&ref_=od_aui_detailpages00
Good luck.

---------- Post added at 10:04 AM ---------- Previous post was at 10:03 AM ----------
allstar21369 said:
I've read there are issues with the Rearth Ringke Fusion case and the camera's flash. Have you experienced problems in that area?
Click to expand...
Click to collapse
I am not a heavy camera user, so I have not tried to see if there is any difference. I have used the camera with no problem. I am very confortable with it, it does its job how it should, protects the phone.
Sent from my ASUS_Z00AD using XDA Free mobile app

I am happy with the nilkin, actually dropped two times and it did its job (thankfully Murphy played nice on me and it always fell on a corner, if it would drop dead flat, screen first, I am sure it would be dead). The back texture helps holding it in my hand, plastic rear cover of 550 is very very slippery also not much bulkier than stock (already bulky and heavy phone).

Litoven said:
I am happy with the nilkin, actually dropped two times and it did its job (thankfully Murphy played nice on me and it always fell on a corner, if it would drop dead flat, screen first, I am sure it would be dead). The back texture helps holding it in my hand, plastic rear cover of 550 is very very slippery also not much bulkier than stock (already bulky and heavy phone).
Click to expand...
Click to collapse
The nillkin tpu transparent case is amazing so if anyone is looking to buy a good case for Zenfone then its worth a try.
Sent from my ASUS_Z00AD

As someone who requires a lanyard to keep the phone from flying away while in the pocket ...
http://www.ebay.ca/itm/400900339275
... I can always find a solution.
Sure, it doesn't protect the device while it's in my hands,but I have more problems with phones when I am not holding them.

I have the Rearth Ringke Fusion and it does add a glare to pics if the flash is on but good thing I rarely use my flash. Looks like a simple fix just cut the piece of plastic that separates the flash and camera but other than that great protection for the phone for now.

Another happy user of the Nillkin Natural TPU, it's an excellent fit and adds very little bulk to the phone. The edges make it much easier to grip the phone as well. Best case I've tried so far.

Nillkin tpu, with a tempered glass screen protector

Yesterday I dropped the phone from the sofa, about 1 meter, it suffered no damage. I'm using the original Asus bumper case. It's a bit expensive, but has a very nice finish.
Sent from my ASUS_Z00AD using Tapatalk

zixen15 said:
The Rearth Ringke Fusion case is very good, fits well, I find it comfortable and of a durable material. Helps with the power button as the case plastic makes it pop out a bit and it can be pressed with a lot of ease.
Here is the link if you want to see it.
http://www.amazon.com/ASUS-ZenFone-5-5-Inch-Case/dp/B00XNSIYTU
Sent from my ASUS_Z00AD using XDA Free mobile app
Click to expand...
Click to collapse
Thats the case I have and its great! It also includes a screen protector and a template to cut out a texture or image that can be swapped when ever which I kinda like.

Slimmest case that has camera protection?

Basically just what the title asks. Can anyone point me to the slimmest case available that offers some protection for the camera? Thanks in advance.

pieces of cake said:
Basically just what the title asks. Can anyone point me to the slimmest case available that offers some protection for the camera? Thanks in advance.
Click to expand...
Click to collapse
I am using the Spigen one. I think it is the slimmest that still protects for the camera bump.
Sent from my LG-LS997 using Tapatalk

I went through quite a few cases and ended up purchasing the Nillikin case and absolutely love it. I needed a case with added grip and some camera protection.
https://www.amazon.com/dp/B01MAZLX5R/ref=cm_sw_r_cp_apa_B-poybKTP18S5
It does not protect the top and bottom like many snap on cases but is thin and has a raised area around the camera. I'd be comfortable laying the phone on a flat surface now. I have the spigen rugged armor which is thicker and protects the entire phone.

utbiglall said:
I went through quite a few cases and ended up purchasing the Nillikin case and absolutely love it. I needed a case with added grip and some camera protection.
https://www.amazon.com/dp/B01MAZLX5R/ref=cm_sw_r_cp_apa_B-poybKTP18S5
It does not protect the top and bottom like many snap on cases but is thin and has a raised area around the camera. I'd be comfortable laying the phone on a flat surface now. I have the spigen rugged armor which is thicker and protects the entire phone.
Click to expand...
Click to collapse
Looks sweet. Thanks.

Can't comment on Nillkin or Spigen cases, never had them. I went Ringke Fusion on the LG G4 and have never looked back. Received my v20 case today (clear/smoke) and put it on. It's VERY marginally recessed compared to where the camera bump is. Is perfectly flat/balanced on an even surface, so you can operate the phone one-handed on the desk if you need to.
My recommendation is to leave the plastic film on the back of the phone where the camera is, any protection you can give it without affecting photo quality will help. I just need a good screen protector now...
Hope that helps.
RoOSTA

pieces of cake said:
Basically just what the title asks. Can anyone point me to the slimmest case available that offers some protection for the camera? Thanks in advance.
Click to expand...
Click to collapse
I'm using the Encased Slim Shield... I like it. Thin, covers everything (camera protrusion as well), fits perfectly, & feels nice in the hands.

Kief_haring said:
I'm using the Encased Slim Shield... I like it. Thin, covers everything (camera protrusion as well), fits perfectly, & feels nice in the hands.
Click to expand...
Click to collapse
Looks really nice. Thanks for your input.

pieces of cake said:
Looks really nice. Thanks for your input.
Click to expand...
Click to collapse
Nillkin also makes one that is a TPU case. I had it on my N6P & it was really nice. I opted for the Encased this time because I wanted a hard case, TPU never keeps it's full shape after a while..

Spigen... very nice case

Spigen rugged armor.. it's thin, nice looking and protects all that is needed
http://www.spigen.com/collections/lg/products/rugged-armor-lg-v20-case

I tried the Spigen Liquid Crystal Case and it is the most minimalist but doesn't have enough protection in my opinion.
I ended up returning it not for that reason, but due to the "yellow" tone of the case itself...I contacted Spigen and they are looking into replacements.
I purchased the Ringke [Fusion] Clear PC Back TPU Bumper in Smoked Black...perfect fit and better protection that looks great with the Titan V20.
https://www.amazon.com/gp/product/B01K5I9IKE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
View attachment 3953115

If you want something with protection while being slim, I'd suggest the UAG LG V20 Plasma Feather-Light Rugged. Been using it since I got my V20 and it's slim and light with plenty of grip, originally I thought that it'll be big and bulky like the OtterBox cases but it's slim enough and knowing it's UAG you don't really have to worry about protection. Even tho it's pricy it's worth it.

You can consider using the Verus crystal bumber case, this and others like spigen to name a few are your only option, just keep the protection film on for added protection, for me I also added a tempered glass protector for both camera lens without any affect what so ever.

utbiglall said:
I went through quite a few cases and ended up purchasing the Nillikin case and absolutely love it. I needed a case with added grip and some camera protection.
https://www.amazon.com/dp/B01MAZLX5R/ref=cm_sw_r_cp_apa_B-poybKTP18S5
It does not protect the top and bottom like many snap on cases but is thin and has a raised area around the camera. I'd be comfortable laying the phone on a flat surface now. I have the spigen rugged armor which is thicker and protects the entire phone.
Click to expand...
Click to collapse
I ended up buying this case. It arrived today and my search is now over. There's simply no way a V20 case could be slimmer than the Nillikin while still offering camera protection. It's awesome. EXACTLY what I was looking for, so thank you!
The top and bottom are protected well enough with the lip extensions on each end.

I bought this off aliexpress, and it's pretty great. perfect fit and some improvement in grip.
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=6497&page=1
downside is, it's glossy and quite the fingerprint magnet especially in a humid country like SG, and the alignment is slightly off for the fingerprint/home button.
otherwise, the port covers are awesome and it'll definitely prevent the lint buildup.
looking to get a tempered glass next.
also, for SG sets, it comes with a promotional pack of 3 back protectors and 2 iRing and a screen protector. will upload pictures soon!

pieces of cake said:
I ended up buying this case. It arrived today and my search is now over. There's simply no way a V20 case could be slimmer than the Nillikin while still offering camera protection. It's awesome. EXACTLY what I was looking for, so thank you!
The top and bottom are protected well enough with the lip extensions on each end.
Click to expand...
Click to collapse
I agree, one of the thinniest case around with the best protection, the case has a built in dust cap for both the charging port and headphone socket.

kms108 said:
I agree, one of the thinniest case around with the best protection, the case has a built in dust cap for both the charging port and headphone socket.
Click to expand...
Click to collapse
I'm guessing you have no idea who you were quoting there, eh?

pieces of cake said:
I'm guessing you have no idea who you were quoting there, eh?
Click to expand...
Click to collapse
Actually it was you who I quoted, but I though you went for the tpu one by nillkin, not the hard case, so yes, it was a mistake on my part.

The Spigen Rugged Armor. 12 bucks on Amazon.

Evocell $10 or less. 3 layered case with holster. Thin and protective. Found on Amazon. Search Evocell LGV20.
Sent from my LG-H918 using Tapatalk

Recommendations for a Slim, Soft-Touch TPU Case?

I'm a new Axon 7 owner and am currently searching for a case to use on this phone. The stock transparent case that comes with the phone is great but due to the fact it's a glossy plastic, it attracts a lot of grease from my fingers and feels dirty after a while. I also dislike it because the sweat from my hands will form into condensation on the back of the case. I also have a problem where the jack on my headphones (Audio Technica ATH-M50) is too large to fit in the hole provided.
I decided to purchase the Spigen 'Rugged Armor' case from Amazon after reading a lot of positive comments about it, but I have been left disappointed and debating whether to return it due to the sheer size and thickness that makes handling the phone (Which is already large enough!) incredibly difficult with small hands. The case does not add much friction despite the material used having a rubber-like appearance, and I actually feel more likely to drop the phone as a result of trying to fumble with the added size. As well as this, the cut-out for the headphone jack is still too small even though it's larger than the wider than the one seen on the stock case. I also find it a lot more difficult to access the fingerprint scanner due to the thickness of the case surrounding it. Another problem is that the case is quite difficult to put onto the phone and a lot harder to remove, to the point where it feels like i'm actually going to damage the phone by attempting to do this!
For my previous phone, a Lenovo ZUK Z2, I had a fantastic Nillkin 'Frosted Shield' shell case that was made from a soft-touch rubber-like plastic. It was very slim at about 2mm in thickness at most, and although it didn't offer much in the way of drop-protection, it did have a nice textured back and that increased the grip tremendously. So, despite the case not being able to protect the phone quite as much from being dropped, it didn't matter because the chances of dropping the phone in the first place were a lot less likely. I wondered whether there was something similar for the Axon 7, but instead in a TPU-style with the sealed corners, and the same thickness as the stock case that's included with the phone? Any recommendations would be most appreciated.

This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.

Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
That looks nice, it's kinda like the old Sandstone Black finish on the OnePlus One. There was one similar to this on Amazon UK but I don't think it had the same texture to it. My only compliant with that one is that it isn't a TPU case which completely covers the corners, but on the other hand the sand texture probably adds a lot of grip to reduce the risk of it being dropped.
I'm currently looking into getting the J&D case from their official website. It's in TPU-form which covers the entire phone (Except from the power/volume buttons!) and has the textured soft-touch back I wanted. The only problem with this one is that the glossy plastic edges look a bit tacky in the pictures, but hopefully it's not as bad in person as it looks on the website. I have a discount code which knocks a subtle 15% off the price listed, so it might be worth a shot.

Looking into this now myself. The stock clear case will go yellow as they all do. Getting cheap see through black case as a temporary till I find a good one. I find the clear one a tad loose at the side.

Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
Hi there,
Does this case provide good grip?
Thanks for confirming!

joaste said:
Hi there,
Does this case provide good grip?
Thanks for confirming!
Click to expand...
Click to collapse
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent

Sui77 said:
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Click to expand...
Click to collapse
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.

joaste said:
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
Click to expand...
Click to collapse
This one is a different story.
It's the best pick you can get

Sui77 said:
This one is a different story.
It's the best pick you can get
Click to expand...
Click to collapse
Thanks. Just ordered it.

joaste said:
Thanks. Just ordered it.
Click to expand...
Click to collapse
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.

P650SE said:
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
Click to expand...
Click to collapse
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.

joaste said:
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
Click to expand...
Click to collapse
Thanks for posting those pictures! That's a shame to hear the grip wasn't as good as expected. I wanted something which provided more grip than the stock case, so maybe this isn't the right one for me. I also live in the United Kingdom and having the case shipped from Germany would make it more expensive in postage costs. It does look like a nice case but I am worried it might not offer much protection if the phone is dropped. I think the J&D case would perhaps be better because it has a soft-touch back and conceals all the corners properly.

I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.

christoophat said:
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
Click to expand...
Click to collapse
Thanks for sharing your thoughts and opinions regarding the cases available for the Axon 7. It's interesting to hear how you found the Spigen case not to be bulky, because I found the opposite and returned it for that exact reason. I eventually purchased one of the cheap, plastic shell cases from AliExpress similar to the that in the pictures Joaste posted above.
My overall opinion on this case has been positive but it has worn on the edges and there are cracks down all four corners. As you mentioned, a shell case does not offer much drop protection but it's definitely better than not having a case at all and it does improve the grip quite notably. However, I wish it had a textured or 'Sandstone' back to help avoid grease buildup.
I am now looking for another case, but options in the UK are limited since the Axon 7 is not officially sold here.

I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.

I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.

emepher said:
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
Click to expand...
Click to collapse
I decided to order one of these in black to try out. Have been quite happy with my Spigen, but after installing this Proworx case yesterday, I think I am falling in love. Seems to offer enough protection, fits & looks nice, AND I kind of like how the buttons are a bit harder to push in, which actually prevents me from squeezing open the screen every time I try to pick it up. :good:

RobboW said:
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
Click to expand...
Click to collapse
Quoting myself here.
Today I fitted the full coverage protector to my Axon 7 and it fits into the Poetic Revolution case nicely! Glad I stripped out the dry protectors in the Poetic cases. I've also now fitted a plastic protector over the glass one as a quick and easy tear off to sacrifice for wear and tear but the glass one makes the front of the phone flat. Even with two stacked protectors, touch works perfectly.
The picture is slightly misleading as the black section also covers the capacitive buttons so there's no indicator of position, but not being backlit anyway, it makes little difference.
Here's a quicky bunch of pics. I have a soft TPU smoky case, black Poetic Revolution and a blue/grey Poetic Revolution which can be mix and matched. Got a couple of little bubbles under the plastic protector and will fix that later, or just remove it. Looks good with just the full coverage glass one.

If anyone is looking for a slim case I just picked up a Bear Motion Sand from eBay. Best case I've had so far for my A7 and I've tried quite a few. Feels like my OPO did.

https://www.amazon.com/dp/B01J9Y5CQ...d_r=3683683e-ab8d-11e8-96dd-777fa7fb2507&th=1
Been using this one for over 6 months now with out any issues , not as bulky as it looks and the stand is useful . I also have a full body clear skin from clear-coat that fits superbly, clear-coat has various outlets through the UK and installs as you wait , is a bit pricey at £30 for the full skin .
I work in the building trade so need it well protected .