Got my case in - Short review of TPU case here:
http://forum.xda-developers.com/showpost.php?p=25346439&postcount=33
Supaiku did a short review of the hard case and TPU here:
http://forum.xda-developers.com/showpost.php?p=25205840&postcount=21
---------------------
TPU:
http://www.ebay.com/itm/Nillkin-Sof...ccessories&hash=item1e6d42d288#ht_5625wt_1163
Hard Shell:
http://www.ebay.com/itm/Nillkin-Har...ccessories&hash=item4d0039a6ec#ht_8581wt_1139
these cases look really nice, i might have to buy one to try.
bought one thanks for the heads up !
Ordered one of each, thanks for the heads up.
THE PRIME GT-I9250
I ordered the TPU case. I read some reviews of Nillkin cases in the other phone forums and they were very good.
I ordered one but cancelled after they quoted 3-6 weeks delivery time! I don't know what's going on with China these days, the last few times I ordered things it took forever. They do look beautiful - the textured back looks grippy.
Had a couple of Nillkin cases for my SGS2 they were fine. These should be as good as those.
How come the TPU has no cutout for the volumerocker?
What advantages has the TPU over the hardcase?
gkhn said:
How come the TPU has no cutout for the volumerocker?
What advantages has the TPU over the hardcase?
Click to expand...
Click to collapse
TPU case is similar to a "gel" or silicone case. I like it because it covers the top and bottom of the phone where the hardcase doesn't
I just bought a One X and two cases:
Nillkin TPU and hard case.
I hope everything will arrive today! But maybe just this weekend
I would image the TPU cases don't have cutouts because you don't need a cutout with such soft rubber. But that's just a guess. (for now!)
gkhn said:
How come the TPU has no cutout for the volumerocker?
What advantages has the TPU over the hardcase?
Click to expand...
Click to collapse
Probably no cutout because you can press them through a case.
In order to protect your phone when you drop it, a case has to slow your phone down gradually and absorb the force of the impact when it hits the pavement which is what a soft case does. A hard case just transfers that force straight to the phone so they're almost useless if you drop it. Hard cases are for preventing scratches only... but then if you get a grain of sand inbetween the case and the phone, it will make more scratches than if you didnt have it.
Mischaseb said:
Probably no cutout because you can press them through a case.
In order to protect your phone when you drop it, a case has to slow your phone down gradually and absorb the force of the impact when it hits the pavement which is what a soft case does. A hard case just transfers that force straight to the phone so they're almost useless if you drop it. Hard cases are for preventing scratches only... but then if you get a grain of sand inbetween the case and the phone, it will make more scratches than if you didnt have it.
Click to expand...
Click to collapse
And a TPU case prevents the grain of sand getting there?
Also i'm guessing that if you press the rocker through the case you won't feel any 'click'?
some TPU cases have the click feel to it and some have a thicker TPU casing which doesn't have the click feel. I purchased a TPU case off of HandheldItems and the power/volume buttons all have a click feel to them.
gkhn said:
And a TPU case prevents the grain of sand getting there?
Click to expand...
Click to collapse
Probably a better chance than a hard case since the soft cases tend to wrap around the phone more completely, and end up flush against the phone body with no gap.
http://www.netimes.com/shop/nillkinâ¢-super-shield-shell-set-for-htc-one-x-p-3943.html?cPath=80_879
Nillkin case.
i got a nillkin hard case in white and i have to say its quite nice. It may look like an ordinary case but the back of it is textured with grip and the sides are glossy and shiny like the one X. It raise the back of the phone very slightly so the camera lens doesn't get scratched easily. for under 20bucks i must say im quite impressed with it. it comes with a screen protector which i haven't tried to put on since i suck at it and a tiny cleaning cloth.
Ordered hard case two days ago.
I just ordered the black TPU case. Will let y'all know when it arrives and if it is worth the purchase.
nanoo-eg said:
http://www.netimes.com/shop/nillkinâ¢-super-shield-shell-set-for-htc-one-x-p-3943.html?cPath=80_879
Nillkin case.
Click to expand...
Click to collapse
I ordered this yesterday, but now I wonder: Is this a hard case or a silicon case?
EvertorN said:
I ordered this yesterday, but now I wonder: Is this a hard case or a silicon case?
Click to expand...
Click to collapse
Hard case. There is a cutout for the volumerocker.
Edit: typo, my baaadd! Hard case has a cutout .
Related
I just got this case from eBay for around $5 USD and I am so impressed with it I had to write a quick review. I think the name brand is Fusion.
-The fit of the case is just perfect. Very snug.
-The thickness is just enough to protect the camera lens and screen without adding much bulk.
-The sides of the case have a nice texture to make it very easy to grip.
-The TPU material doesn't attract lint and is very easy to slide in and out of your pocket.
-All of the holes match up fine.
-The buttons on the sides of the phone are covered but in my opinion this makes the pressure required just right so you don't accidentally press them.
The only negative at all is that the hole for the headphone jack may be too small for some plugs. The Samsung headphones and my Bose headphones fit just fine though. (Update: My Bose speakers I had to trim a little plastic off of the audio cable but it fits fine now.)
Here is the eBay link if anybody wants one. This guy shipped one to me in 2 days in the US.
http://cgi.ebay.com/Clear-Fusion-Samsung-Galaxy-S2-i9100-TPU-COVER-CASE-/260780906673?pt=PDA_Accessories&hash=item3cb7c0d8b1
If you're willing to wait a few days more, you can get them for 2,5$ in Dealextreme.
I have exactly the same one, purchased for £2.95 off ebay in the UK, and I would agree with all the points outlined above.
bought two of them from Dealextreme, but in black color, best TPU
Do they make them in matte black?
I ordered a similar one from eBay on the 14th, and it arrived today. Fits pretty well and leaves a bit of a bumper around the display, adding a bit of protection.
bmstrong said:
Do they make them in matte black?
Click to expand...
Click to collapse
I believe I saw a matte black on Dealextreme. Most of the black ones I've seen are part matte, part glossy.
http://www.amazon.co.uk/SAMSUNG-GALAXY-SCREEN-PROTECTOR-ACCESSORIES/dp/B004WO6ISI/ref=sr_1_23?s=electronics&ie=UTF8&qid=1306245039&sr=1-23
The thickness is just enough to protect the camera lens and screen without adding much bulk.
Click to expand...
Click to collapse
Hard to tell from the image, but isnt that simply a hole in the case where they camera lense is, so offers no protection for the lens at all??
Its an impossible task trying to find a case that offers protection for the camera.. they are so hi spec and good quality these days, the last thing you want is muck or scratches on the optics.. surely a case designer can be innovative enough to design some sort of sliding cover....
I purchased the Black one as well. However, the glossy part scratches too easily. Handle with care.
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Artius89 said:
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Click to expand...
Click to collapse
It's true, that was my experience with this TPU case as well. Dust would pile up on the edges of the screen and under the TPU lining. I'd have to constantly take off the TPU case and wipe the screen to keep my SGS2 nice and pretty. With the official Samsung vent case i can simply wipe the screen clean in one go without taking off the case. Sure, the official case offers less protection, but it also preserves the form and weight of the phone quite well, whereas the TPU case adds significant weight and thickness to the phone in comparison.
I just got a few of these delivered from buyaccess. Delivered in a week and they fit like a glove. Nice ridge around the screen so it won't scratch if you put it face down and extra grip on the sides.
€2 each and free shipping you cannot go wrong. Link to the sellar if anybody wants it.
http://myworld.ebay.ie/buyaccess/?_trksid=p4340.l2559
i am using nillkin tpu case ，absolutely good awesome。I was driving motorbike in raining day.made my hand wet and glutinous 。then using my phone，that is feeling good。not like some case make your hand oily
http://www.ebay.co.uk/itm/150635443...43813&_sacat=See-All-Categories&_fvi=1&_rdc=1
Anyone know if there is a decent Plastic type case for our T989? I'm looking for something that will emulate the back cover feel. I don't like silicone cases and really looking for something that will protect the phone but have basically the same feel that it does right now.
Basically I want it to take some punishment but be able to take it out of my pocket easilly like it does now.
The diztronic TPU cases seem to fit your criteria. I have one and like it. It's not silicon and stays on quite firmly. I've dropped my phone many times with no dings or scratches. Without a case, the t989 actually is too thin sometimes.
i got a smoke color TPU from ebay and its smooth and glossy like the back cover - doesnt feel too rubbery or too much like plastic
Try this case i bought on amazon. its not very expensive and it has a hard plastic back but the sides are TPU material. the case feels great on my phone and its very snug. it can surely take a beating and it doesnt add much bulk to the phone. i recommend it.
only downside is that the power and volume buttons are not cut out but everything else is.
i still highly recommend it. if you look under the sellers page and type t989 in the search bar it will give you more of the same case in different colors.
http://www.amazon.com/gp/product/B006LPARZG/ref=oh_details_o03_s00_i00
musicguy99 said:
The diztronic TPU cases seem to fit your criteria. I have one and like it. It's not silicon and stays on quite firmly. I've dropped my phone many times with no dings or scratches. Without a case, the t989 actually is too thin sometimes.
Click to expand...
Click to collapse
I agree, I've been using the Diztronic case on my Galaxy S2 and I am very happy with it.
Sent from my Transformer TF101 using Tapatalk 2
Has anyone purchased a case like this? I am assuming that it is a TPU case with an aluminum bezel thingy around the outside. I would like to see it on a phone to see how much thicker it makes the phone (it looks to be a very thin alternative to a full aluminum bezel). I also am curious as to if it is actually TPU or another material. Thoughts?
http://www.ebay.com/itm/Blue-Samsun...ccessories&hash=item231edaa84b#ht_1465wt_1071
P.S. It is also fairly cheap.
It doesnt mention that its TPU.
To me, it looks like a plastic back. I think that if it fell, the clips would break that hold the back to the aluminum.
ImARaptor said:
Has anyone purchased a case like this? I am assuming that it is a TPU case with an aluminum bezel thingy around the outside. I would like to see it on a phone to see how much thicker it makes the phone (it looks to be a very thin alternative to a full aluminum bezel). I also am curious as to if it is actually TPU or another material. Thoughts?
http://www.ebay.com/itm/Blue-Samsun...ccessories&hash=item231edaa84b#ht_1465wt_1071
P.S. It is also fairly cheap.
Click to expand...
Click to collapse
looks like aluminum and polycarbonate to me, I doubt it's TPU. TPU isn't brittle enough to clip like that, which is why you don't see many TPU cases for slider phones.
That would be sweet though if it were made with TPU along the back with that bezel. Looks nice.
Wond3r said:
I think that if it fell, the clips would break that hold the back to the aluminum.
Click to expand...
Click to collapse
That was my first thought as well!
Sent from my phone. Prepare for atrocious Swype typos.
Seen some murmurs of this case here and there but no posts, so I figured I'd leave my impressions. Got it here
http://www.mobimega.com/capdase-soft-jacket-lamina-ultra-thin-case-for-galaxy-s3-i9300.html
I've been looking for a thinner case that covers the top and the bottom of the phone, so the SGP, case mate, Rearth, etc were out.
Got the capdase lamina case today to replace my Diztronic TPU case. My beef with the diztronic is that it just added too much bulk to the phone
The capdase lamina is the same soft material as the Diztronic but its much thinner(supposed to be 0.75mm according to the box). Its completely clear except for the capdase logo embossed on the back. In the end it does exactly what I want it to: thinner and lighter than the Diztronic, but the same protection. The only downside is it does cover the power and volume buttons in TPU and takes away all the clickiness, but its still usable
This case does have a lip on the front so you can set your phone down without messing up the screen(I still use a screen protector though)
Sorry only camera I got right now is the phone so pics of the case on the phone will come later tonight
I am currently using the capdase Xpose. It isn't 0.75 mm thin but it is still a lot thinner than the Distronic. Great case because it is TPU but feels just as soft as the silicon part or the SGP Neohybrid.
I am waiting until my SGP Modello gets here for the final showdown for my daily driver case. Or at least until I see something else that catches my eye.
tonysunshine said:
Seen some murmurs of this case here and there but no posts, so I figured I'd leave my impressions. Got it here
http://www.mobimega.com/capdase-soft-jacket-lamina-ultra-thin-case-for-galaxy-s3-i9300.html
I've been looking for a thinner case that covers the top and the bottom of the phone, so the SGP, case mate, Rearth, etc were out.
Got the capdase lamina case today to replace my Diztronic TPU case. My beef with the diztronic is that it just added too much bulk to the phone
The capdase lamina is the same soft material as the Diztronic but its much thinner(supposed to be 0.75mm according to the box). Its completely clear except for the capdase logo embossed on the back. In the end it does exactly what I want it to: thinner and lighter than the Diztronic, but the same protection. The only downside is it does cover the power and volume buttons in TPU and takes away all the clickiness, but its still usable
This case does have a lip on the front so you can set your phone down without messing up the screen(I still use a screen protector though)
Sorry only camera I got right now is the phone so pics of the case on the phone will come later tonight
Click to expand...
Click to collapse
Tomatoes8 said:
I am currently using the capdase Xpose. It isn't 0.75 mm thin but it is still a lot thinner than the Distronic. Great case because it is TPU but feels just as soft as the silicon part or the SGP Neohybrid.
I am waiting until my SGP Modello gets here for the final showdown for my daily driver case. Or at least until I see something else that catches my eye.
Click to expand...
Click to collapse
Hey guys! Is there any way I could get some pics (and opinions) on this case? I would love to see what it actually looks like on the phone. I have the pebble blue GS3 and would like to see that, but any pictures would be awesome. Also, what are your impressions after having the case for a while?
Thanks in advance!
looks like a case with good drop protection
http://www.ebay.com/itm/AMZER-BLACK...L-/121649568822?ssPageName=ADME:B:BOC:US:1123
This one is great!!! http://m.ebay.com/itm/281684193800?varId=580689263837&txnId=1374093401018
bloodomen2 said:
looks like a case with good drop protection
http://www.ebay.com/itm/AMZER-BLACK...L-/121649568822?ssPageName=ADME:B:BOC:US:1123
Click to expand...
Click to collapse
I just got this case yesterday, I ordered on May 5th and I received it on May 13th. Very fast shipping from US to Canada. Case looks and fits nicely, the edges are glossy but the back of the case has a nice matte finish with that "Amzer" logo. As for drop protection, It would probably survive, but keep in mind that the case is very thin (about 1 mm thick on all sides). It's not like an Otterbox case, but I prefer these types of thinner cases.
These are one of the nicest ones available right now besides the generic unbranded tpu cases, and I'm also waiting for this one to come in the mail: http://www.ebay.ca/itm/C1-NILLKIN-N...t=LH_DefaultDomain_0&var=&hash=item35e86b1904
I ordered this case a couple of days ago and will be making a quick review on it as soon as I get it via YouTube. I feel like there's a lack of cases or information on this phone and I want to contribute.
Sent from my ASUS_Z00AD using XDA Free mobile app
lordpipa said:
This one is great!!! http://m.ebay.com/itm/281684193800?varId=580689263837&txnId=1374093401018
Click to expand...
Click to collapse
i dont like the generic rugged cases their materials feels too cheap and flimsy
i usually buy UAG cases for my devices
KevOne said:
I just got this case yesterday, I ordered on May 5th and I received it on May 13th. Very fast shipping from US to Canada. Case looks and fits nicely, the edges are glossy but the back of the case has a nice matte finish with that "Amzer" logo. As for drop protection, It would probably survive, but keep in mind that the case is very thin (about 1 mm thick on all sides). It's not like an Otterbox case, but I prefer these types of thinner cases.
These are one of the nicest ones available right now besides the generic unbranded tpu cases, and I'm also waiting for this one to come in the mail: http://www.ebay.ca/itm/C1-NILLKIN-N...t=LH_DefaultDomain_0&var=&hash=item35e86b1904
Click to expand...
Click to collapse
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
Yes, it does have a lip that covers that entire phone, it keeps the screen at least 1 mm off the ground when you put it face it down. And yeah, I can't wait for that Nillkin case, it covers everything on the phone from the headphone jack, volume buttons and charging port. Everything except the camera
bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
I have this case, which I feel matches the nillkin tempered glass screen protector very well. (looks like they may be OOS for the ZF2)
I received the Amzer case two days back. I'm not too happy with the case and wouldn't recommend it to anyone.
The pros are...
1. It covers all the sides and has a lip the protects the screen.
2. The buttons have neat cutouts.
3. The back is a nice Matt finish.
The cons are...
1. The case is slightly loose on the lower side near the USB port.
2. The sides have an unfinished sharp edge running across all 4 sides. This spoils the feel of the case when you hold it in your fingers.
3. Glossy sides spoil the look and make it look cheap.
4. On two sides there's a small extrusion that looks like an unfinished factory flaw from the moulding process.
In the past I have used TPU cases from vendors like Diztronic and I have to say the quality of those cases was way better. For the price Amzer is charging for this case they should have delivered a quality product.
I got this case from eBay UK:
http://www.ebay.co.uk/itm/301580146391?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
And I can recommend it. Cutouts are good, it's slim but still just overhangs the screen to protect it. In fact, you hardly notice it when it's on.
bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
alose said:
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
Click to expand...
Click to collapse
I received mine today. It has already become my favorite of four cases I have received thus far (Nilkin, Amzer, Sparin, Einzige).
alose said:
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
Click to expand...
Click to collapse
So this case covers the buttons on the phone? All the other cases just leave a cutout, which i imagine would make them hard to press.
cmendonc2 said:
So this case covers the buttons on the phone? All the other cases just leave a cutout, which i imagine would make them hard to press.
Click to expand...
Click to collapse
Yes the case covers the buttons, and are easy to press. The power button is actually easier then without a case.
I have another TPU case and has cutouts. The volume buttons are still accessible with that one, but the power button is a real pain to press.
just received the nillkin tpu case
very nice case for the price its well built barely adds any bulk and provide decent protection
The original Asus case seems good, with textured finish that should give good grip:
http://www.bhphotovideo.com/c/product/1147172-REG/asus_90xb00ra_bsl2n0_bumper_case_for_zenfone.html
I haven't ordered it yet, but so far is my first consideration. It seems better than other cheap TPU cases I've looked at. as most of them seem to have a smooth finish and seem slippery. I also don't like the "shiny" look most of these TPU cases have.
I ordered this one grey
For ASUS ZenFone 2 ZE551ML ZE550ML Dual Layer Plastic And Silicone Case For ZenFone2 5.5INCH Armor Hybrid Combo Phone Case
http://www.aliexpress.com/item/For-...ne-Case-For-ZenFone2-5-5INCH/32362634172.html
(from AliExpress Android)
onesky said:
I ordered this one grey
For ASUS ZenFone 2 ZE551ML ZE550ML Dual Layer Plastic And Silicone Case For ZenFone2 5.5INCH Armor Hybrid Combo Phone Case
http://www.aliexpress.com/item/For-...ne-Case-For-ZenFone2-5-5INCH/32362634172.html
(from AliExpress Android)
Click to expand...
Click to collapse
Sweet....looks like a non-spigen made slim armor....just might be what i need!