I own a OnePlus One with the Bamboo back and as most people already know, it's actually quite thicker than the normal sandstone black and silk white backs and also a bit heavier. Because of this, most cases won't fit. I already tried putting on a naked clear case but my phone was too thick. Hopefully others with the Bamboo back could post here what cases would fit so we can put together a sort of list of confirmed cases that fit the Bamboo OPO.
kylethelife said:
I own a OnePlus One with the Bamboo back and as most people already know, it's actually quite thicker than the normal sandstone black and silk white backs and also a bit heavier. Because of this, most cases won't fit. I already tried putting on a naked clear case but my phone was too thick. Hopefully others with the Bamboo back could post here what cases would fit so we can put together a sort of list of confirmed cases that fit the Bamboo OPO.
Click to expand...
Click to collapse
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
nicholaschum said:
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
Click to expand...
Click to collapse
Wow! That's solid helpful. The one I wanted to get but didn't fit when I tried it on was the Bepak Slim Transparent Case so stay away from that if you've got the bamboo. I really wanted a clear case coz I didn't want to cover the Bamboo but after trying the Bepak case I didn't think any slimfit clear case would fit. Glad to hear the Ringke Fusion Case fits! Do you have the clear one? I think I might just order one.
nicholaschum said:
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
Click to expand...
Click to collapse
Sorry, can I just confirm, is the Aluminium Case you mention first the one by kwmobile/KW-Commerce? And, if it is, you say you wouldn't choose it because of potential scratching, but do you think it's still a good case in that it protects the screen from being damaged?
TheMurphmeister said:
Sorry, can I just confirm, is the Aluminium Case you mention first the one by kwmobile/KW-Commerce? And, if it is, you say you wouldn't choose it because of potential scratching, but do you think it's still a good case in that it protects the screen from being damaged?
Click to expand...
Click to collapse
Yeah because that case is actually already very snug on the sandstone version of the OnePlus, with the added thickness at the back, it will scrape along the plastic and the bamboo (I had a lot of experience with aluminium bumpers with added thickness battery covers (Note 3 + Al bumper + Al battery cover) and the battery cover was scratches so much). It will protect your screen somehow (I did drop my sandstone OPO with a tempered glass on solid concrete and it was perfectly fine)
nicholaschum said:
Yeah because that case is actually already very snug on the sandstone version of the OnePlus, with the added thickness at the back, it will scrape along the plastic and the bamboo (I had a lot of experience with aluminium bumpers with added thickness battery covers (Note 3 + Al bumper + Al battery cover) and the battery cover was scratches so much). It will protect your screen somehow (I did drop my sandstone OPO with a tempered glass on solid concrete and it was perfectly fine)
Click to expand...
Click to collapse
Thanks for the information; think I'll give that one a miss then and go for the Tudia Ultra Slim instead
nicholaschum said:
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
Click to expand...
Click to collapse
strongly disagree. I'd recommend Orzly Fusion bumper case. The fit is perfect, not too tight. Fits perfectly round the edges and definitely not loose on the 'lay-on-the-table' part. I also own Ringke & Diztronic.
Im pretty sure u got a bad batch of the Orzly, or maybe an early batch...
Sagar4995 said:
strongly disagree. I'd recommend Orzly Fusion bumper case. The fit is perfect, not too tight. Fits perfectly round the edges and definitely not loose on the 'lay-on-the-table' part. I also own Ringke & Diztronic.
Im pretty sure u got a bad batch of the Orzly, or maybe an early batch...
Click to expand...
Click to collapse
I would not, my two cases I ordered one month apart are exactly what KP Smith said in a comment here:
https://plus.google.com/u/0/app/basic/stream/z13awxcpole1eh1tf22uihs51zrfd3ssp
Sent from my Nexus 6 using Tapatalk VIP
Vassy's One+
Thank you for doing this review. Your post makes me want to try the TUDIA Ultra Slim LITE TPU Bumper.
Saw this review on it.
youtu.be/cd1O8LdeGUo
my diztronic tpu slim cases fit pretty good as well. you put them on like you would with the regular back then just run your fingers around the edges and it falls right into place. I have 4 different colors from different batches and all fit fine. I also have the ringke fusion.. its actually on my phone right now. Its got the clear back and tinted sides. Fits 99.9% perfectly! Its my go to case for sure.
Related
So Cruzerlite sent me one of their TPU cases to test and review and I just got it today.
http://www.cruzerlite.com/cases/mot...e-bugdroid-circuit-tpu-case-for-google-moto-x
First impression is that it's a nice case. Very slim and a tight fit with all the cutouts aligned perfectly. I got the smoke-translucent colored one and I'm digging the Andy the Android circuit design on the back. The back is made out of a matte TPU material while the edges are glossy and it feels really good in the hand.
I also have two other TPU cases for the Moto X - one by Hyperion and the other a generic s-line case off Ebay. The one big advantage the Cruzerlite has over the other two, besides the design art, is that there are cutouts for the power button and volume rocker which I very much prefer.
My one gripe, and it's either a minor or major one depending on the user, is that there's no cutout for the dimple. This is a major drawback for me since I've found that the dimple has become a natural place for me to put my finger especially when I'm talking on the phone. I love my dimple and I would miss it if was covered up.
So I'm probably going back to the Hyperion TPU case for now. I'd say overall, the Cruzerlite is a nicer case but the covered dimple is just a deal breaker for me. If that doesn't matter to you, I'd highly recommend the Cruzerlite if you're looking for a good TPU case.
clankfu said:
So Cruzerlite sent me one of their TPU cases to test and review and I just got it today.
http://www.cruzerlite.com/cases/mot...e-bugdroid-circuit-tpu-case-for-google-moto-x
First impression is that it's a nice case. Very slim and a tight fit with all the cutouts aligned perfectly. I got the smoke-translucent colored one and I'm digging the Andy the Android circuit design on the back. The back is made out of a matte TPU material while the edges are glossy and it feels really good in the hand.
I also have two other TPU cases for the Moto X - one by Hyperion and the other a generic s-line case off Ebay. The one big advantage the Cruzerlite has over the other two, besides the design art, is that there are cutouts for the power button and volume rocker which I very much prefer.
My one gripe, and it's either a minor or major one depending on the user, is that there's no cutout for the dimple. This is a major drawback for me since I've found that the dimple has become a natural place for me to put my finger especially when I'm talking on the phone. I love my dimple and I would miss it if was covered up.
So I'm probably going back to the Hyperion TPU case for now. I'd say overall, the Cruzerlite is a nicer case but the covered dimple is just a deal breaker for me. If that doesn't matter to you, I'd highly recommend the Cruzerlite if you're looking for a good TPU case.
Click to expand...
Click to collapse
Can you post a pciture of the dimple cutout?
Droidguy987 said:
Can you post a pciture of the dimple cutout?
Click to expand...
Click to collapse
You mean on the Hyperion case right? Here you go:
clankfu said:
So Cruzerlite sent me one of their TPU cases to test and review and I just got it today.
http://www.cruzerlite.com/cases/mot...e-bugdroid-circuit-tpu-case-for-google-moto-x
First impression is that it's a nice case. Very slim and a tight fit with all the cutouts aligned perfectly. I got the smoke-translucent colored one and I'm digging the Andy the Android circuit design on the back. The back is made out of a matte TPU material while the edges are glossy and it feels really good in the hand.
I also have two other TPU cases for the Moto X - one by Hyperion and the other a generic s-line case off Ebay. The one big advantage the Cruzerlite has over the other two, besides the design art, is that there are cutouts for the power button and volume rocker which I very much prefer.
My one gripe, and it's either a minor or major one depending on the user, is that there's no cutout for the dimple. This is a major drawback for me since I've found that the dimple has become a natural place for me to put my finger especially when I'm talking on the phone. I love my dimple and I would miss it if was covered up.
So I'm probably going back to the Hyperion TPU case for now. I'd say overall, the Cruzerlite is a nicer case but the covered dimple is just a deal breaker for me. If that doesn't matter to you, I'd highly recommend the Cruzerlite if you're looking for a good TPU case.
Click to expand...
Click to collapse
What if you cut the hole yourself, to make the "dimple"?
fabyloso said:
What if you cut the hole yourself, to make the "dimple"?
Click to expand...
Click to collapse
I guess you could do that. I'm fine with just sticking with my Hyperion case for now though.
I'm wondering if you can simply cut out the dimple by yourself. I'm going to use a large wood drill bit or with something like this
http://www.horseshopinternational.n...e95/g/e/gecombineerde_gaatjestang_700_419.jpg
once i get my Cruzerlite case, i plan on cutting a hole in it for the dimple. i plan on using a Dremel and a few different tips to smooth out the edges and make it look a bit more professional. ill post pictures within the week to show how it goes!
used one of my dremel tips and put a shallow dip in my case. came out pretty good, a little of center, but i think i can deal with it...
I shaded it in with a pencil for a picture so you can see it better
Do you think it would work with a tempered glass screen protector? I have a Mime and the Hyperion case pushes up the edges.
For me the cruzerlite case is great except for the fact that it collects dust and pocket lint and can scratch the plastic edging around the edge of the phone. Other than that it's great, just warning the potential buyers.
looks like a case with good drop protection
http://www.ebay.com/itm/AMZER-BLACK...L-/121649568822?ssPageName=ADME:B:BOC:US:1123
This one is great!!! http://m.ebay.com/itm/281684193800?varId=580689263837&txnId=1374093401018
bloodomen2 said:
looks like a case with good drop protection
http://www.ebay.com/itm/AMZER-BLACK...L-/121649568822?ssPageName=ADME:B:BOC:US:1123
Click to expand...
Click to collapse
I just got this case yesterday, I ordered on May 5th and I received it on May 13th. Very fast shipping from US to Canada. Case looks and fits nicely, the edges are glossy but the back of the case has a nice matte finish with that "Amzer" logo. As for drop protection, It would probably survive, but keep in mind that the case is very thin (about 1 mm thick on all sides). It's not like an Otterbox case, but I prefer these types of thinner cases.
These are one of the nicest ones available right now besides the generic unbranded tpu cases, and I'm also waiting for this one to come in the mail: http://www.ebay.ca/itm/C1-NILLKIN-N...t=LH_DefaultDomain_0&var=&hash=item35e86b1904
I ordered this case a couple of days ago and will be making a quick review on it as soon as I get it via YouTube. I feel like there's a lack of cases or information on this phone and I want to contribute.
Sent from my ASUS_Z00AD using XDA Free mobile app
lordpipa said:
This one is great!!! http://m.ebay.com/itm/281684193800?varId=580689263837&txnId=1374093401018
Click to expand...
Click to collapse
i dont like the generic rugged cases their materials feels too cheap and flimsy
i usually buy UAG cases for my devices
KevOne said:
I just got this case yesterday, I ordered on May 5th and I received it on May 13th. Very fast shipping from US to Canada. Case looks and fits nicely, the edges are glossy but the back of the case has a nice matte finish with that "Amzer" logo. As for drop protection, It would probably survive, but keep in mind that the case is very thin (about 1 mm thick on all sides). It's not like an Otterbox case, but I prefer these types of thinner cases.
These are one of the nicest ones available right now besides the generic unbranded tpu cases, and I'm also waiting for this one to come in the mail: http://www.ebay.ca/itm/C1-NILLKIN-N...t=LH_DefaultDomain_0&var=&hash=item35e86b1904
Click to expand...
Click to collapse
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
Yes, it does have a lip that covers that entire phone, it keeps the screen at least 1 mm off the ground when you put it face it down. And yeah, I can't wait for that Nillkin case, it covers everything on the phone from the headphone jack, volume buttons and charging port. Everything except the camera
bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
I have this case, which I feel matches the nillkin tempered glass screen protector very well. (looks like they may be OOS for the ZF2)
I received the Amzer case two days back. I'm not too happy with the case and wouldn't recommend it to anyone.
The pros are...
1. It covers all the sides and has a lip the protects the screen.
2. The buttons have neat cutouts.
3. The back is a nice Matt finish.
The cons are...
1. The case is slightly loose on the lower side near the USB port.
2. The sides have an unfinished sharp edge running across all 4 sides. This spoils the feel of the case when you hold it in your fingers.
3. Glossy sides spoil the look and make it look cheap.
4. On two sides there's a small extrusion that looks like an unfinished factory flaw from the moulding process.
In the past I have used TPU cases from vendors like Diztronic and I have to say the quality of those cases was way better. For the price Amzer is charging for this case they should have delivered a quality product.
I got this case from eBay UK:
http://www.ebay.co.uk/itm/301580146391?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
And I can recommend it. Cutouts are good, it's slim but still just overhangs the screen to protect it. In fact, you hardly notice it when it's on.
bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
alose said:
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
Click to expand...
Click to collapse
I received mine today. It has already become my favorite of four cases I have received thus far (Nilkin, Amzer, Sparin, Einzige).
alose said:
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
Click to expand...
Click to collapse
So this case covers the buttons on the phone? All the other cases just leave a cutout, which i imagine would make them hard to press.
cmendonc2 said:
So this case covers the buttons on the phone? All the other cases just leave a cutout, which i imagine would make them hard to press.
Click to expand...
Click to collapse
Yes the case covers the buttons, and are easy to press. The power button is actually easier then without a case.
I have another TPU case and has cutouts. The volume buttons are still accessible with that one, but the power button is a real pain to press.
just received the nillkin tpu case
very nice case for the price its well built barely adds any bulk and provide decent protection
The original Asus case seems good, with textured finish that should give good grip:
http://www.bhphotovideo.com/c/product/1147172-REG/asus_90xb00ra_bsl2n0_bumper_case_for_zenfone.html
I haven't ordered it yet, but so far is my first consideration. It seems better than other cheap TPU cases I've looked at. as most of them seem to have a smooth finish and seem slippery. I also don't like the "shiny" look most of these TPU cases have.
I ordered this one grey
For ASUS ZenFone 2 ZE551ML ZE550ML Dual Layer Plastic And Silicone Case For ZenFone2 5.5INCH Armor Hybrid Combo Phone Case
http://www.aliexpress.com/item/For-...ne-Case-For-ZenFone2-5-5INCH/32362634172.html
(from AliExpress Android)
onesky said:
I ordered this one grey
For ASUS ZenFone 2 ZE551ML ZE550ML Dual Layer Plastic And Silicone Case For ZenFone2 5.5INCH Armor Hybrid Combo Phone Case
http://www.aliexpress.com/item/For-...ne-Case-For-ZenFone2-5-5INCH/32362634172.html
(from AliExpress Android)
Click to expand...
Click to collapse
Sweet....looks like a non-spigen made slim armor....just might be what i need!
I always rock an Otterbox Commuter case on my phones mainly for work conditions can get rough at times. From what I've seen, Otterbox is only offering their Defender series (too big and bulky) and their Symmetry series (thinner, one piece case). I've decided to go with the Symmetry series and I'm pleasantly surprised. It definitely adds a little bit of bulk, but not as much as the Commuter, while offering great all-around protection. The one piece design is easy to put on and remove (unlike previous Symmetry cases I've tried on other phones). I do wish that there was a bit of grip on the sides like the Speck Presidio series cases, but I like the design. Unfortunately the only options were clear, pink, or black.... so I went with black.
So what's your choice for a protective case? Share pics and comments.
I too normally use the Otterbox defender for my phones but I wanted to try something new. I bought a poetic revolution for myself and a supcase unicorn beetle pro for my wife. They appeared a little slimmer and had port covers which I wanted. Amazon says they will arrive tomorrow so I shall see.
holden56 said:
I too normally use the Otterbox defender for my phones but I wanted to try something new. I bought a poetic revolution for myself and a supcase unicorn beetle pro for my wife. They appeared a little slimmer and had port covers which I wanted. Amazon says they will arrive tomorrow so I shall see.
Click to expand...
Click to collapse
I had the unicorn beetle pro for my Nexus 6 and it's a nice cheaper alternative to the defender, but it still adds more bulk than the commuter case. I may look into the poetic case though. Let me know how they work out for you. ?
I went to Best Buy and tried out the Defender case. Definitely too bulky and I hate the built in screen protector (and it doesn't sit well over a glass screen protector, even if you take out the built in one).
You may not like the poetic as it has the built in screen protector. I'm used to the bulk of the defender so I'm not a great judge of the size. I will tell you the poetic is smaller then the supcase unicorn beetle. Built in port covers are nice too, overall it is a smaller rugged case you can say.
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Went from a Note 3 with Otterbox Commuter to a G6 with Spigen "Tough Armor" case, and am satisfied with it. Feels like it provides just as much protection as the Otterbox Commuter, yet not adding quite as much bulk. I'm kinda rough with my phones sometimes, and I'd have peace of mind if I were to accidentally drop my G6 from waist-height or so.
If you choose to go with Spigen, definitely buy it off Amazon, rather than directly from Spigen's website; it's cheaper off Amazon.
cortez.i said:
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Click to expand...
Click to collapse
I almost went with this case but I got this one instead. It's the Caseology.
This Poetic has been great for me after a few days of use. Lightweight, decent protection, and good grip.
Poetic Affinity Slim Fit for LG G6 Clear Case With Anti-Slip Side Grip and Reinforced Corner Protection Bumper for for LG G6 Black/Clear https://www.amazon.com/dp/B06W5K3YWF/ref=cm_sw_r_cp_apa_N4v7ybREB4YDC
I wanted to order Poetic but they don't ship to EU and i get Ringke Fusion but still waiting for the phone.
cortez.i said:
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Click to expand...
Click to collapse
I just ordered this one on Amazon. Saw the office and couldn't pass it up. Glad to see it looks good, and works well with a glass protector. I got the Spigen glass 2 pack as I've always liked everything Spigen makes.
Was gonna get the unicorn beetle that I had for my s7e, but don't think I need that much protection on this one, plus no edge screens that I need to prevent my palm from hitting lol.
Update: I hate the Karbon case. Doesn't fit tightly and leaves gaps at the edges on the front. I guess for $8 it'll hold me over until I get a good case, but this one is not staying pass this weekend.
Sent from my LG-H872 using Tapatalk
I would go for the Spigen Rugged Amor, it’s much slimmer and provide pretty much the same protection as the symmerty series http://www.the-reviewr.com/best-lg-g6-case/
Had that rugged armor for my v20 and loved it. Decided to go with the neo hybrid for the g6
Spigen Neo Hybrid LG G6 Case Herringbone with Flexible Inner Protection and Reinforced Hard Bumper Frame for LG G6 (2017) - Gunmetal https://www.amazon.com/dp/B01N4QCEHA/ref=cm_sw_r_cp_apa_2o68yb7SMM8C1
djjroc007 said:
Had that rugged armor for my v20 and loved it. Decided to go with the neo hybrid for the g6
Spigen Neo Hybrid LG G6 Case Herringbone with Flexible Inner Protection and Reinforced Hard Bumper Frame for LG G6 (2017) - Gunmetal https://www.amazon.com/dp/B01N4QCEHA/ref=cm_sw_r_cp_apa_2o68yb7SMM8C1
Click to expand...
Click to collapse
Do you have pics of what it looks like on your phone?
Thanks!
So guys I'm searching for a good protective case that doesn't add too much bulk. I'm torn between the Poetic Revolution and the Supcase Unicorn Beetle. I like the way the Poetic looks except for the cutout on back, I prefer the Unicorns Cutouts. If anyone here has any pics to share, that be awesome. Or unless someone has another case to throw in the mix. THanks
I made a YouTube video comparing these 4 clear cases. They were all pretty good but if you can only have one:
https://youtu.be/s_vFNzXv_g0
Sent from my LG-H872 using Tapatalk
jlczl said:
I made a YouTube video comparing these 4 clear cases. They were all pretty good but if you can only have one:
Click to expand...
Click to collapse
Thanks for the comparison!
Liked and subscribed for no other reason than the Last of the Mohicans soundtrack playing in the background. One of my favorite soundtracks.
I agree with your assessment on the UAG. I was not impressed with its quality, fit, and finish, especially for a $40 case. It's really a $17 to $19 case. I am rocking a cheap case currently, similar to the Spigen but just a TPU case.
Sent from my LG-H872 using Tapatalk
I like my ghosted case. It fits well and it seems protective.
just bought the Ringke Air LG G6 case from Amazon, comes in Clear and Smoked, really like it
So guys I need some opinions here. I torn between two cases and would like some help deciding. I can't decide between the two.
1. Ringke Fusion: https://goo.gl/tGKqRx
2. Spigen Ultra Hybrid: https://goo.gl/9sd0jZ
Any pros and cons would definitely help. Thanks.
I just got this phone for my wife and we got a cheap case at a small phone shop. The problem with the case is its hard to swipe the side of the screen on the left side because of the lip on the case.
Do any of these have that issue?
treezy26 said:
So guys I need some opinions here. I torn between two cases and would like some help deciding. I can't decide between the two.
1. Ringke Fusion: https://goo.gl/tGKqRx
2. Spigen Ultra Hybrid: https://goo.gl/9sd0jZ
Any pros and cons would definitely help. Thanks.
Click to expand...
Click to collapse
I'll go with Ringke.
Sent from my LG-H872 using Tapatalk
Ringke fusion for the win.
Sent from my LG-H870DS using Tapatalk
I have the spigen and it's the best tpu i have ever bought.
Fortunately, also rated highly in the video.
Thnx OP
treezy26 said:
So guys I need some opinions here. I torn between two cases and would like some help deciding. I can't decide between the two.
1. Ringke Fusion: https://goo.gl/tGKqRx
2. Spigen Ultra Hybrid: https://goo.gl/9sd0jZ
Any pros and cons would definitely help. Thanks.
Click to expand...
Click to collapse
What did you end up getting?
I just got the Spigen, because I was happy with this case on previous phones. I'm disappointed by this case for 3 reasons:
Gap at fingerprint button and camera openings allow dust and dirt to get underneath case
Back of case is very slippery because the edges curve in
Back plastic makes direct contact with whatever surface you put phone on. So the back will get scratched as it slides around.
I'm thinking of getting the Ringke, but Amazon reviews state dust gets in from the back openings (like the Spigen) and it's loose on one side. I guess the curved back of the G6 is the reason. The opening for the fingerprint sensor is not chamfered on the Ringke. The Spigen cutout is chamfered and smaller. Using the fingerprint sensor is comfortable and precise on the Spigen. The Ringke has TPU feet on the back corners, so it won't slide on a surface and the back plastic won't get scratched. I like how the Ringke comes in smoked black, whereas the Spigen is only available in clear (which will yellow eventually).
HKSpeed said:
What did you end up getting?
I just got the Spigen, because I was happy with this case on previous phones. I'm disappointed by this case for 3 reasons:
Gap at fingerprint button and camera openings allow dust and dirt to get under neath case
Back of case is very slippery because the edges curve in
Back plastic makes directly contact with whatever surface you put phone on. So the back will get scratched as it slides around.
I'm thinking of getting the Ringke, but Amazon reviews state dust gets in from the back openings (like the Spigen) and it's loose on one side. I guess the curved back of the G6 is the reason. The opening for the fingerprint sensor is not chamfered on the Ringke. The Spigen cutout is chamfered and smaller. Using the fingerprint sensor is comfortable and precise on the Spigen. The Ringke has TPU feet on the back corners, so it won't slide on a surface and the back plastic won't get scratched. I like how the Ringke comes in smoked black, whereas the Spigen is only available in clear (which will yellow eventually).
Click to expand...
Click to collapse
So I went with the Ringke Fusion ink black with clear back and it does get dirt and debris around cutouts. I should have gone with the smoke back because the clear is a fingerprint magnet. I'm constantly wiping the back off as it looks horrible with all them smudges on it. But besides that it's an ok case. But I am in search of a new case as I'm tired of this one now lol.
Sent from my LG-H872 using Tapatalk
I have the poetic and truly amazing case and had her to yellow like my spigen did. After 3 months use on the poetic no issues at all
I ordered the Ringke smoked TPU case (no hard back plastic) because it's smoked and there's a 30% off coupon if you buy another Ringke product on Amazon.
https://www.amazon.com/dp/B01MZCOSWH
I just received this clear TPU case for $2.58 on Amazon after coupon. Click the "Buy 1, get 35% off" link below the price and it the discount shows at the final checkout screen.
https://www.amazon.com/dp/B06XBZ77HV
I'm returning the Spigen Ultra Hybrid.
Spigen is the best one.
Went with Poetic for corner protection & price
I used to like clear case, but overtime they turn yellowish
Best clear case for LG G6. UAG vs Spigen vs Poetic vs Ghostek
I loved my Spigen case. It has fit precisely on my LG G6 and provides ultimate protection.
I loved the feel of my Spigen case, but it's definitely a finger print magnet and yellowed over time, and it picked up blue from my jeans, so it's a mess. I wish they had the same case available in solid colors or at least tinted. I moved on to a Spigen thin fit hard shell case for now. No more clear cases for me.
I will suggest Spigen cases for LG G6 .
Case reviews: Rhinoshield CrashGuard & SolidSuit, Zeking Ultra Slim, Crave Slim Guard
i've used a number of cases that you can easily purchase from amazon before including the spigen tough armor, spigen neo hybrid, spigen crystal shell, ringke fusion and the rhinoshield crashguard. I think the 2 most important aspects of a good phone case is reinforced corner protection and elevated front edge to protect the screen. When I got the pixel 2 XL, I started looking for a slim yet protective case and I ended up trying the 4 cases below. I used each case about 1-2 weeks and thought I'd share my thoughts. I did receive the Rhinoshield cases from the company for free but they are not involved with my write up in any way, shape or form.
The photos attached are in accordance to the order of which the cases are reviewed.
Rhinoshield CrashGuard bumper case:
This was my favorite case when I had my galaxy s7 and when I moved on to the LG G5 then G6, I was disappointed to find out that they don't make the CrashGuard for them.
From my experience using this case with the galaxy s7 (which I had for about a year before it was stolen...), this case simply works. I am not the best when it comes to handling my phone therefore it gets dropped a lot; this case really does the job well when it comes to impact protection while being minimalistic. During the past 2 weeks with the case, I've dropped my pixel 2 a few times from different heights, mostly from standing height and some from when I get out of the car and the case has been effective. According to Rhinoshield, their cases have a 11.5 ft impact resistance rating which supposedly far exceeds the " US MILITARY DROP TEST STANDARD".
Many others have commented on how slippery this case is. Well, it is and that's because Rhinoshield now coats the cases to make them more stain resistant. For me, personally, I don't mind as I find it easier to slide in and out of my pockets.
Some physical changes I've noticed is that the case fits A LOT more snug to the point where it is quite difficult for me to take the phone out of the case. That's an inconvenience for me as I fly a drone here and there and in order for the phone to fit into the remote controller I have to take the case off. Now I may have to buy a separate phone holder for the remote controller. Another change that's worth pointing out is that in my old s7 case, the raised lip on the back of the case was more pronounced at the corners and the top and bottom edges. This gave me more of a piece of mind since it is a bumper case and the back of the phone is exposed. However, it seems like they have eliminated that from their design of the new cases and I wish they kept that. Lastly, now you can change up the color of the power button but the colored buttons have to be purchased separately. The power button is very responsive but the volume rocker you'd have to press a little bit harder.
Other non-noticeable changes they've made since I had their case for the s7 is they now use a different material (fancy name 'ShockSpread Material') for their cases which is suppose to be lighter, thinner but just as protective and durable.
The case is friendly with their screen protectors, as well with the Sparin TPU screen protector that I got from amazon. In terms of skin, it will not work with the Dbrand precision fit skin but fine with standard fit. However, it will leave an indent on the standard fit skin as shown in photos.
Lastly, if you happen to have a Feiyu tech SPG-c gimbal, with the heaviest counterweights the phone with this case just barely works.
Rhinoshield SolidSuit
Overall, very similar to the CrashGuard bumper case.
I'll highlight the differences:
- compatible with the RhinoShield add-on lens
- of course, heavier and bulkier (heaviest of the 4)
- feels very solid because of the overall construction, as well the back is protected
- most of the finishing is the same as the CrashGuard, however the back of mine has the carbon fiber finishing which I guess made it less slippery
- volume rocker is much more responsive than the CrashGuard
- did not work at all with the Feiyu tech SPG-c gimbal
Zeking ultra slim TPU case from amazon canada
In my opinion, very good case. For less than $10, you get padded corner protection plus raised front edge without much added bulkiness; this is just as good as cases such as ones from Spigen or Ringke but for 1/3 or 1/2 the price.
It is made of TPU and I haven't had the case long enough to speak about yellow-ing, but the TPU feels decent not cheap. On the inside of the back of the case, there are these microdots and I can't understand their purpose. You can actually feel them when you brush you finger across. The side buttons are responsive, clicky. A really thoughtful and unique design is that along the sides of the case the TPU's texture is different and it allows for better grip (almost like there's a very smooth sandpaper strip). The advantage of this case in comparison to the two Rhinoshield cases above is that it does feel slimmer in hand.
When it comes to impact protection, it doesn't have that "over 11 ft of impact protection" that's marketed for the Rhinoshield cases, however the few times I dropped the phone in this case it was completely fine.
I did try to use this case with the Dbrand 'precise fit' skin. It will not work well with the skin if you have the tendency to take your phone in and out of the case. As i took my phone out, it lifted the skin that goes around the the corner on the side of the phone. On the other hand, the 'standard fit' skin did just fine. In terms of screen protectors, it is compatible with the Sparin TPU screen protector as well as the protectors from Rhinoshield.
Similar to the Rhinoshield CrashGuard, this barely worked with my Feiyu Tech SPG-c gimbal.
Crave Slim Guard from amazon canada
This case is very similar to the Ringke Fusion in a sense that both have the TPU bumper that goes around the case, and the clear polycarbonate back. This case, however, has a very pronounced elevated front lip to the point where it almost feels like the phone is sunken in inside the case. It's very good if you're looking for extra raised front protection, however when you're swiping left or right on the screen you will feel the edge more so than the other cases. It may help if the company just round off the raised edges a little bit more. A thoughtful part of their design is that they raised the back corners a tiny bit; my guess is they are there to raise the back a little bit so when you sit the phone on a flat surface it doesn't scratch up the polycarbonate back. All the buttons super responsive and clicky; probably the best buttons of the 4 cases. The phone does feel pretty slim in this case and I think even slimmer than the Zeking TPU case. I don't remember dropping my phone while using this case, but based on its construction it should do just as good as the Ringke Fusion case but definitely not as good as the other 3 cases above.
Overall I think this case is just as good as the Ringke Fusion if not better protection because of the pronounced elevated front edge. Keep in mind, from my experience using these cases with a polycarbonate back they will get scratched up over time and you will see more finger print smudges.
When it comes to compatibility with skin and screen protectors, it is the same as above.
Similar to the Rhinoshield CrashGuard and ZeKing ultra slim, this barely worked with the Feiyu Tech SPG-c gimbal.
Long review but hope this helps. I will start another post for my screen protectors review as well as a review of the add-on lens from RhinoShield.
Nice reviews! Kudos
My fav is the Zeking ultra slim TPU!
Not related to the topic, but can you tell me where you get the yellow skin for your Pixel? I'm interested in that yellow lock button.
allweknowisa said:
Not related to the topic, but can you tell me where you get the yellow skin for your Pixel? I'm interested in that yellow lock button.
Click to expand...
Click to collapse
from DBrand
see my review here
https://forum.xda-developers.com/pi...and-skins-review-hyperblack-titanium-t3780607
The yellow power button is from rhinoshield. you can purchase the colored buttons separately on their site and it's compatible with their cases.
Thanks for your detailed review. One thing is that I tried Ringke Fusion and Crave Slim Guard; I think Ringke Fusion does provide a bit more of FRONT lip, doesn't it?
drvalianto said:
Thanks for your detailed review. One thing is that I tried Ringke Fusion and Crave Slim Guard; I think Ringke Fusion does provide a bit more of FRONT lip, doesn't it?
Click to expand...
Click to collapse
I don't have the exact measurements and my experience with the ringke fusion is with the lg g6 case. To me it seems like the crave slim guard has a slightly more raised front lip than the ringke fusion but then i am not comparing apple to apple.
Update:
I stuck with my RhinoShield Crashguard and it has protected my phone... extremely well. I have lost count how many times I've dropped it face down, down the stairs, and more.... yep, a bit clumsy with phones.
I stayed at this villa in Bali, and it literally tumbled down these stairs from top to bottom..and my phone remains immaculate. (except when i was in Bali I decided to use it briefly without the case..and of course I dropped it..... )
Included photos of the case with the worst scratches and also...the staircase where it literally bounced its way down...