Develop Bugs

TPU Case Review for I9100

I just got this case from eBay for around $5 USD and I am so impressed with it I had to write a quick review. I think the name brand is Fusion.
-The fit of the case is just perfect. Very snug.
-The thickness is just enough to protect the camera lens and screen without adding much bulk.
-The sides of the case have a nice texture to make it very easy to grip.
-The TPU material doesn't attract lint and is very easy to slide in and out of your pocket.
-All of the holes match up fine.
-The buttons on the sides of the phone are covered but in my opinion this makes the pressure required just right so you don't accidentally press them.
The only negative at all is that the hole for the headphone jack may be too small for some plugs. The Samsung headphones and my Bose headphones fit just fine though. (Update: My Bose speakers I had to trim a little plastic off of the audio cable but it fits fine now.)
Here is the eBay link if anybody wants one. This guy shipped one to me in 2 days in the US.
http://cgi.ebay.com/Clear-Fusion-Samsung-Galaxy-S2-i9100-TPU-COVER-CASE-/260780906673?pt=PDA_Accessories&hash=item3cb7c0d8b1

If you're willing to wait a few days more, you can get them for 2,5$ in Dealextreme.

I have exactly the same one, purchased for £2.95 off ebay in the UK, and I would agree with all the points outlined above.

bought two of them from Dealextreme, but in black color, best TPU

Do they make them in matte black?

I ordered a similar one from eBay on the 14th, and it arrived today. Fits pretty well and leaves a bit of a bumper around the display, adding a bit of protection.

bmstrong said:
Do they make them in matte black?
Click to expand...
Click to collapse
I believe I saw a matte black on Dealextreme. Most of the black ones I've seen are part matte, part glossy.
http://www.amazon.co.uk/SAMSUNG-GALAXY-SCREEN-PROTECTOR-ACCESSORIES/dp/B004WO6ISI/ref=sr_1_23?s=electronics&ie=UTF8&qid=1306245039&sr=1-23

The thickness is just enough to protect the camera lens and screen without adding much bulk.
Click to expand...
Click to collapse
Hard to tell from the image, but isnt that simply a hole in the case where they camera lense is, so offers no protection for the lens at all??
Its an impossible task trying to find a case that offers protection for the camera.. they are so hi spec and good quality these days, the last thing you want is muck or scratches on the optics.. surely a case designer can be innovative enough to design some sort of sliding cover....

I purchased the Black one as well. However, the glossy part scratches too easily. Handle with care.

Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.

Artius89 said:
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Click to expand...
Click to collapse
It's true, that was my experience with this TPU case as well. Dust would pile up on the edges of the screen and under the TPU lining. I'd have to constantly take off the TPU case and wipe the screen to keep my SGS2 nice and pretty. With the official Samsung vent case i can simply wipe the screen clean in one go without taking off the case. Sure, the official case offers less protection, but it also preserves the form and weight of the phone quite well, whereas the TPU case adds significant weight and thickness to the phone in comparison.

I just got a few of these delivered from buyaccess. Delivered in a week and they fit like a glove. Nice ridge around the screen so it won't scratch if you put it face down and extra grip on the sides.
€2 each and free shipping you cannot go wrong. Link to the sellar if anybody wants it.
http://myworld.ebay.ie/buyaccess/?_trksid=p4340.l2559

i am using nillkin tpu case ，absolutely good awesome。I was driving motorbike in raining day.made my hand wet and glutinous 。then using my phone，that is feeling good。not like some case make your hand oily
http://www.ebay.co.uk/itm/150635443...43813&_sacat=See-All-Categories&_fvi=1&_rdc=1

[CASE] Acase Superleggera Pro vs Spigen Slim Armor

Acase Superleggera Pro
vs
Spigen Slim Armor
For Nexus 5​
Prologue:
Going to have a good ol' fashion case off here for the Nexus 5. At first I was excited, thinking that I would actually take measurements and pictures, but then I remembered that I'm too lazy for that kind of stuff. Therefore, this will only be a personal comparison with color-codie goodness. A little warning that already I'm biased towards Acase because I've used a superleggera pro for my iPhone 4s (never going back to Apple) and after two years of dropping, that phone looks like its brand new (with loads of finger prints :good: ). Besides the protection, I also just love the smooth feel of matte...
Summary:
Both cases have their advantages, but personally I went with Acase.
Main Points:
If you didn't know, both of these cases are supposedly dual-layered cases. This means that these cases have two pieces to their design. Whether that actually adds to the protection and shock absorption or not, I have no idea. What I do know is that psychologically, I feel like my phone has better protection.
Superleggera Pro:
Silicone Case with a Poly-carbonate shell
Nice smooth feel but super slippery.
Example: Case face down, back up. Try to slide your hand against the back. Barely any friction or resistance when sliding my hand across.
Good enough lift in the back to protect the camera but no extra corner stands like the Slim Armor for airflow. Great lift in the front as well.
[*]Clicky feedback when pressing volume and power buttons. You can press the power button without accidently pressing the volume buttons too.
(Note: See Slim Armor main points for details)
A little Acase branding on the bottom of the back of the case.
Slim Armor:
Hard TPU with a Poly-carbonate Shell
Nice smooth feel, making it a little slippery but not too slippery.
Example: Case face down, back up. Try to slide your hand against the back. I felt resistance from my hand sticking to the case.
[*]Nice lift in the back for airflow and nice lift in the front to protect the screen.
[*]Buttons lose their clicky feedback. Big problem for me. Also had some occasional issues with locking the screen since the amount of force needed to press the power button makes you also press the volume buttons if you have your finger there.
Spigen branding on the lower part of the back of the case and on the right side. Looks cooler than the Acase branding but who cares really.
Review:
To me. dual-layer means two different layers put together to make one great case. With the Slim Armor, I was expecting silicone plus the poly-carbonate like the Acase I was already used to. As far as silicon vs hard tpu for the base part of the case, I haven't read or seen anything that sets a clear winner.
With the positioning of the second layer of poly-carbonate Acase wins here. I mean when I drop my phone it hits the corners or at least near the corners more often than it lands perfectly on its side. With the Slim Armor, the hard shell poly-carbonate pretty much just covers the side and the corners are covered only by the hard tpu. Spigen claims that there are "air-pockets" in those corners in their advertising but I don't know how effective these "air-pockets" are. Anyway, If I wanted hard tpu to protect my corners, I'd just get a hard tpu case. The Acase has all around dual-layering except for the buttons and cut-outs like the headphone slot. With the Acase I feel I'm getting the true dual-layered protection I'm looking for where both the hard shell and the silicone cover the corners for that added and padded protection.
Button feedback is another pet-peeve/preference for me. Acase, since its silicone, has perfect feedback. Easy to press down and you feel and hear that click. Spigen, no feedback...at all. Thanks to hard tpu, its hard to press your buttons down. Now I'm not saying that its impossible to press the button down but the resistance of hard tpu not only kills your clicky feedback but it also can make you squeeze your phone hard enough to press the volume at the same time as the power button.
Both cases pick up on finger prints pretty easily. The Acase can also pick up on dust, lint, etc with its silicone. Personally, I can put up with this for a better feeling case. After a little back and forth case swapping, I realized that the Acase has more lift than the Slim armor in the front Due to the thickness of the silicone at that point. The case also wraps around the edges more (something I liked) without making my screen protector peel up at the edges.
Both cases have plenty of space for the micro-usb and speaker cut-outs. However, with most cases there are issues with the headphone port. My tiny apple headphone jacks fit perfectly for both cases, however my bulky (1 cm diameter) speaker jack only fit with the Acase. Since the Acase uses stretchy silicone, I could push the headphone in at the expense of stretching the silicone a little. With the Slim Armor, there was no way to get it in without taking off the case at the top. (I will note that its easier to take the top part of the Slim Armor off than it is to take the Superleggera Pro)
Width and length are the same for both cases, however the Acase is slightly thicker. For me, this means more protection at the cost of a barely noticeable additional thickness. Both cases feel great in the hand, I just felt like the Superleggera Pro had more pro's and a better feel than the Slim Armor.
Edit:
Just got a chance to test the Acase with a wireless charger (CHOETECH Stadium) and it works! The charger isn't that special, so I'm going to assume that most chargers should work with the Acase. I still recommend you conduct your own research on wireless chargers and compare it to the CHOETECH so you can confirm that whatever you buy will work as well. I'm not supporting CHOETECH in any way, just stating the charger I used to test the ability to wirelessly charge through the Acase.

Well said!
I also own both cases, and will vouch for everything ximaginex said. Personally, I feel the Acase provides a better level of protection than the Slim Armor because it has both silicone & polycarbonate protecting the corners vs. just TPU. The Acase is thicker, but feels better in your hands and the button response feels like using the phone bare.
Pro Tip: If you wish to remove the branding on the Acase, borrow a cotton ball and a dab of nail polish remover from your girlfriend. Lightly rub the lettering and it should come right off.

Kennypete said:
Well said!
I also own both cases, and will vouch for everything ximaginex said. Personally, I feel the Acase provides a better level of protection than the Slim Armor because it has both silicone & polycarbonate protecting the corners vs. just TPU. The Acase is thicker, but feels better in your hands and the button response feels like using the phone bare.
Pro Tip: If you wish to remove the branding on the Acase, borrow a cotton ball and a dab of nail polish remover from your girlfriend. Lightly rub the lettering and it should come right off.
Click to expand...
Click to collapse
The had no idea about the removal technique, thanks. Not sure if I want to do it or not though. The branding is like a classy tramp stamp for my phone, but having it smooth and clean might be pretty nice too.
Sent from my Nexus 5

So can you guys post pictures?
Sent from my Nexus 5 using Tapatalk

Clicky Feedback on spigen
I've got 2 different revisions of the spigen slim armor. as you can see the only difference is the way the pads for the keys are attached. The one with only one connection on the top side have a very big ce "clicky" feedback, the other one is very difficult to press. So you could try to cut the bottom connection and see if it gets better.

I also got the Acase case. One thing that bothers me is that the inner silicon layer is too soft, I wish it was tpu instead. The bottom lift of the phone is not reinforced high enough by the hard plastic shell, making the inner layer too loose.

I'd love to see an owner's picture of the Acase. ☺

derju said:
I've got 2 different revisions of the spigen slim armor. as you can see the only difference is the way the pads for the keys are attached. The one with only one connection on the top side have a very big ce "clicky" feedback, the other one is very difficult to press. So you could try to cut the bottom connection and see if it gets better.
Click to expand...
Click to collapse
Thanks for pointing that this out. I'll consider trying this and report back if it works.

Can someone post a picture of the acase? Considering getting one
Sent from my Nexus 5 using Tapatalk

[/URL][/IMG] Here's a pic. I'll try to upload some more, with the nexus 5 in it.

Great review... But holy hell that was a lot of Comic Sans! That font always make me think of this picture.

Just got my Acase today and it is much thicker than I imagined it would be... But the bulkiness is kind of nice and the phone still feels great in hand so far. I ordered mine from CTCstore on Amazon and it was listed as Slim Superleggera PRO but my packaging only says Superleggera PRO... I emailed the vendor for clarification but am wondering if the op is referencing the slim version or regular, or if they are actually the sane thing.

Here's a picture of mine.
http://i.imgur.com/JnMmuwm.jpg
http://i.imgur.com/QjUjN3M.jpg

That white Superleggera case looks great! Thanks for posting the pictures. :thumbup:

ktamondo said:
Here's a pic. I'll try to upload some more, with the nexus 5 in it.
Click to expand...
Click to collapse
Broken picture.
GHOSTIVVI said:
Can someone post a picture of the acase? Considering getting one
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Have you seen the amazon pictures?

To me I thought that the spigen slim armor felt like a dollar store product. Its fits OK but is just hard and cheap feeling. The volume buttons were sorta hard to push. I absolutely love my acase.
Sent from my Nexus 5 using Tapatalk

Fixed the broken picture.

Terrible. The only place that carries this is Amazon.com and they won't ship to Canada.
Brutal. Just brutal.
Sent from my Nexus 5 using Tapatalk

derju said:
I've got 2 different revisions of the spigen slim armor. as you can see the only difference is the way the pads for the keys are attached. The one with only one connection on the top side have a very big ce "clicky" feedback, the other one is very difficult to press. So you could try to cut the bottom connection and see if it gets better.
Click to expand...
Click to collapse
Is the power button the same design (only connected on one side) on the new revision? Spigen allegedly sent me the revised TPU but my buttons look the same as the original design. I actually cannot tell the difference between my original one and the new one. I think Spigen might have messed up and sent me the original revision as a replacement.
To keep this on topic, I also have both cases as well. I actually liked the functionality of the Superleggera best (clicky buttons, corner coverage, etc) but to me the look and quality of materials of the spigen were significantly better than the superleggera. See I would have said the superleggera was the generic cheepo case and the spigen was the high end case. Just shows how widely peoples opinions can vary on two identical items.

Waiting for more pics from you!
---------- Post added at 12:01 PM ---------- Previous post was at 11:57 AM ----------
ktamondo said:
[/URL][/IMG] Here's a pic. I'll try to upload some more, with the nexus 5 in it.
Click to expand...
Click to collapse
Waiting for more pics of this red case!

PureGear GripTek case

I first had the Seidio Surface case with kickstand and while I liked the case the kickstand was worthless in portrait mode, it was also a bit slippery to hold. Next I bought the SupCase and it does provide more protection than the Surface without adding too much bulk. The edges were a bit sharp but had started to wear down and the case provides more grip then the Surface & has a dimple. A downfall of this case is trying to type while the phone is on a desk/table as it slides around.
So I recently purchased the PureGear GripTek case in green. This case is not bulky but provides great grip due to the multitude of grooves in the sides and back of the case. The lip around the screen protects it if placed face down but thin enough that it doesn't interfere with swiping. The buttons have a good feeling to them and the bumpers on the corners will provide more impact protection without being obtrusive. The case slides very easily in/out of my pocket as well. Overall it's hands down the best case I've owned or seen. I plan on taking a Dremel with a round stone and carefully making a small dimple myself in the case, shouldn't be very hard to do and will make the grip even better.
I do wish that PureGear offered more color choices, I would like to see a darker blue & red along with other options. I bought the case from www.WirelessGround.com for $14 shipped with an online free shipping coupon.
http://www.pure-gear.com/griptek-impact-protection-for-motorola-moto-x.html

I kinda like this. Is it pretty much a TPU case with softer/more rubbery corners?

tallgrasshawk said:
I kinda like this. Is it pretty much a TPU case with softer/more rubbery corners?
Click to expand...
Click to collapse
Yes, the main material is not as gummy as Cruzerlite TPU cases I have had but it still flexible and easy to install. The added grip of the case is a big benefit with this case, I think I'm going to get a black one also.

amCase Ultra Slim-Fit Case Review + Pictures

amCase Ultra Slim-Fit Case
There has been a lot of slim cases like the Rearth Ringke slim, spigen and others. The amCASE ultra slim is a bit different than the others.
First, its thin alright. Fits well and not much wiggle room when in the case. The back has a nice soft matte grip finish, No corner was sharp but a nice smooth rounding on all sides/corners. There is some lift ont he bezel around the phone so it lifts the phone just a bit to prevent scraching the glass on the front when setting it face down on a table.
The amCase differes in that there is no bezel by the buttons on the phone. While it makes it have even less protection than other slim cases; it makes it a lot easier to take it off and on. The Rearth slim I have has just a good fit but the buttons would always get caught when taking it off or on.
It doesn't add much protection on the bottom or sides which is nice to have complete free access to all the ports/seakers.
This is definitely not a case if you're clumsy with your phone but there to prevent the small drops or scratches. Very minimalistic and good construction witht he added bonus of the easiest to take on and off of the phone than other slim cases

This is my kind of case. I presently have the rearth slim. It's the only case for me, so far. This looks like a great option for those of us who like the more professional look vs the bling, bulky, rubber, two piece, colored type cases. I'll have to try one. Is the logo (boo hiss btw) raised or etched in any way or is it just printed?
Nexus5

almost bought this case, but reviewers had issues with the matte finish coming off after a week.
Please update your review after couple weeks on the fit and finish.
thanks

jbdan said:
This is my kind of case. I presently have the rearth slim. It's the only case for me, so far. This looks like a great option for those of us who like the more professional look vs the bling, bulky, rubber, two piece, colored type cases. I'll have to try one. Is the logo (boo hiss btw) raised or etched in any way or is it just printed?
Nexus5
Click to expand...
Click to collapse
just printed on. I'm sure it'll start rubbing off soon enough

I only used the amcase on my nexus 4. The first one I had was amazing. The second started peeling almost immediately.
I just received my new one for the nexus 5. It has a slippery soft feel that is really disappointing.
Sent from my Nexus 5 using Tapatalk

This guy has a video review of it and shows the case peeling pretty badly at all 4 corners.
http://www.youtube.com/watch?v=O8CB7i_ExSA

Does anybody have ADOPTED Protective Case?

Can someone tell us more about this case? Does the case cover buttons? Are buttons easy to press? Is it thick or easy to grip? Can some one upload some pix showing cutouts?
Thanks

I couldn't get a good read on this case, which is specifically why I didn't go with it. That and the high price point. $20 is a lot of money for a one-piece case, but about right for a two-piece case.
By my assessment and my knowledge of phone cases, here's what I'd expect from the ADOPTED case:
1) raised covers over the buttons.
2) button cover and inside surface made of TPU or similar mid-density flexible plastic.
3) outer surface made of either TPU (my suspicion), or made of a harder plastic. If 2 materials, then permanently affixed. Otherwise, 1 material, just one piece.
Presently, I'm suggesting the Lightning Knight Armor Defender case which goes for about $8 on Amazon. It is a two-piece design, with an inner sleeve made of silicone, and an outer polycarbonate shell. It's not the best design in terms of fit and finish. However, we're still very early into the N5X's accessory availability. A better design will come out. May as well get something decent enough for the moment, and switch to something nicer later.

Ive got the adopted case, because My spigen thin case was impeding on the microphone functioning. The adopted case has a really nice feel to it. The back is a smooth but not too slippery flexible material. The sides have a fine or to mid fine grain to them, but feels really good in the hand. The case through one five minute phone call did not impede any hearing or speaking functions. Overall I am very happy with it.
---------- Post added at 07:35 AM ---------- Previous post was at 07:35 AM ----------
I cannot do any pictures right now, i am at work

Loving ADOPTED So Far.
I've provided some photos. In the hand, it doesn't get annoying. My worry is with the clear frost option though. I feel it might be discoloring over time. :-/ It is slightly stubborn to remove, but that's a good thing when dropped. Easy to put on though. Brilliant start. I'll look for other cases but this one will always satisfy me.

you guys are the best! Thanks for all the info and pictures. I think this case looks good and you guys say it feels good in hand and is not slippery. I wanted something simple and this might do the trick.

How does it compare with one of the bugdroid cases, if anyone has had both? I'm sure they both fit perfectly but am looking for the one that adds the least bulk! ? The phone is just right width-wise without a case but it's just too slippery to hold, I'm sure I'll drop it so a TPU case is a must I think... ?
Thanks!

I had the clear frost one first but I didn't end up liking it. FYI my 5x is the black one. Ended up ordering the black case and returning the clear one. The case is nice. Materials feel nice in the hand and is pretty grippy. The edges go over the front a good amount for protection and the side buttons are comfortable and easy to use. The back is smooth while the edges around the phone has a slight texture to it for a more grippy feel. The case fits on very securely.

cheezycheeto said:
I had the clear frost one first but I didn't end up liking it. FYI my 5x is the black one. Ended up ordering the black case and returning the clear one. The case is nice. Materials feel nice in the hand and is pretty grippy. The edges go over the front a good amount for protection and the side buttons are comfortable and easy to use. The back is smooth while the edges around the phone has a slight texture to it for a more grippy feel. The case fits on very securely.
Click to expand...
Click to collapse
Cheeto, thanks for great pix. I just ordered the same black case for my phone.

I have this case and like it pretty well except for one thing: the part that wraps around to the front is too wide. I find it difficult to swipe from the edges successfully without pushing it out slightly with my thumb. Very annoying. I've currently got two other cases on their way and hopefully I'll like one of them better. I've never had this issue with any other case on any other phone, and when I look at the design of my old cases, I see that they all have a beveled edge on the front and they keep it as thin as possible, unlike the Adopted case.

waldox said:
I have this case and like it pretty well except for one thing: the part that wraps around to the front is too wide. I find it difficult to swipe from the edges successfully without pushing it out slightly with my thumb. Very annoying. I've currently got two other cases on their way and hopefully I'll like one of them better. I've never had this issue with any other case on any other phone, and when I look at the design of my old cases, I see that they all have a beveled edge on the front and they keep it as thin as possible, unlike the Adopted case.
Click to expand...
Click to collapse
So how did the two cases fair out against the adopted? The thickness and stuff.

I have this case and while I didn't love it at first I've come to really like it. Its thicker and more protective than most of the regular tpu cases but yet doesn't add too much bulk.
Sent from my Nexus 5X using Tapatalk