Develop Bugs

[Q] Case with decent grip?

I currently have a hard silicone back cover case on my phone but it becomes extremely slippery if I don't continuously wash it.
The back is completely smooth and I am terrified of dropping it.
I need to find a case that actually has a texture or some form of grip and keeping it under $20.
Otterbox Impact Case looks awesome, but I haven't found any good feedback on if its made from silicone that looses grip and goes slippery.
Does anyone have any suggestions?
Thanks.

Amzer jelly case. Lots of colors, terrific feel, padded corners, textured grip area, good lens protection, and so cheap on eBay you can get them for less than burgers. And if you're someone who swaps out batteries, or has a car or desk dock that wants a naked phone, they're easily removable.

Thank you for the reply.
I've had silicone cases that would lift up when ever you would slide to one side or the other.
How are the edges on the sides of the screen?
Also, anyone know how the otterbox impact cars are?
Sent from my HTC Evo via the XDA app.

The Amzer just barely wraps over the sides of front face of the screen, maybe 3/32". The bottom comes up about an eighth, and the top is cut out to clear the light sensor, speaker and front camera. I've not had issues at the edges, but I can't say if that's how I use it.
I don't think the Otterbox is in anyone's hands yet.

VW91N3 said:
The Amzer just barely wraps over the sides of front face of the screen, maybe 3/32". The bottom comes up about an eighth, and the top is cut out to clear the light sensor, speaker and front camera. I've not had issues at the edges, but I can't say if that's how I use it.
I don't think the Otterbox is in anyone's hands yet.
Click to expand...
Click to collapse
Alright, thanks for the info.
I am terrified of the sides being lose enough for anything to slide between them and my phone and cause my phone some damage.
(http://www.youtube.com/watch?v=cUT8179c2lc - at ~1:20 you an see the sides of this case being crazy loose)
I was hoping someone that had an otterbox impact on a similar phone would have a comment on if the cases texture or fit was an issue.
Thanks again.
Sent from my HTC Evo via the XDA app.

The Amzer isn't as thin. I've not had the pull-away issues, but then, I won't carry a glass phone in a pants pocket, either. I usually carry mine in my shirt pocket.
http://www.youtube.com/watch?v=u6HBMlMU3CM
Looks like they're going for about eight bucks on eBay, including shipping.

Hi again,
I added grip tape (left over from a skateboard deck) to my current case...lol.
It serves its purpose very well, but looks awful.
I have a chance to get the Platinum Case (Best Buy) for $10.
Anyone have any comments on this one?
Does it go slippery or feel like it could slip out of your hands?
EDIT: I just bought the case. I read some good reviews on it... guess I'll see once it arrives.

TPU Case Review for I9100

I just got this case from eBay for around $5 USD and I am so impressed with it I had to write a quick review. I think the name brand is Fusion.
-The fit of the case is just perfect. Very snug.
-The thickness is just enough to protect the camera lens and screen without adding much bulk.
-The sides of the case have a nice texture to make it very easy to grip.
-The TPU material doesn't attract lint and is very easy to slide in and out of your pocket.
-All of the holes match up fine.
-The buttons on the sides of the phone are covered but in my opinion this makes the pressure required just right so you don't accidentally press them.
The only negative at all is that the hole for the headphone jack may be too small for some plugs. The Samsung headphones and my Bose headphones fit just fine though. (Update: My Bose speakers I had to trim a little plastic off of the audio cable but it fits fine now.)
Here is the eBay link if anybody wants one. This guy shipped one to me in 2 days in the US.
http://cgi.ebay.com/Clear-Fusion-Samsung-Galaxy-S2-i9100-TPU-COVER-CASE-/260780906673?pt=PDA_Accessories&hash=item3cb7c0d8b1

If you're willing to wait a few days more, you can get them for 2,5$ in Dealextreme.

I have exactly the same one, purchased for £2.95 off ebay in the UK, and I would agree with all the points outlined above.

bought two of them from Dealextreme, but in black color, best TPU

Do they make them in matte black?

I ordered a similar one from eBay on the 14th, and it arrived today. Fits pretty well and leaves a bit of a bumper around the display, adding a bit of protection.

bmstrong said:
Do they make them in matte black?
Click to expand...
Click to collapse
I believe I saw a matte black on Dealextreme. Most of the black ones I've seen are part matte, part glossy.
http://www.amazon.co.uk/SAMSUNG-GALAXY-SCREEN-PROTECTOR-ACCESSORIES/dp/B004WO6ISI/ref=sr_1_23?s=electronics&ie=UTF8&qid=1306245039&sr=1-23

The thickness is just enough to protect the camera lens and screen without adding much bulk.
Click to expand...
Click to collapse
Hard to tell from the image, but isnt that simply a hole in the case where they camera lense is, so offers no protection for the lens at all??
Its an impossible task trying to find a case that offers protection for the camera.. they are so hi spec and good quality these days, the last thing you want is muck or scratches on the optics.. surely a case designer can be innovative enough to design some sort of sliding cover....

I purchased the Black one as well. However, the glossy part scratches too easily. Handle with care.

Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.

Artius89 said:
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Click to expand...
Click to collapse
It's true, that was my experience with this TPU case as well. Dust would pile up on the edges of the screen and under the TPU lining. I'd have to constantly take off the TPU case and wipe the screen to keep my SGS2 nice and pretty. With the official Samsung vent case i can simply wipe the screen clean in one go without taking off the case. Sure, the official case offers less protection, but it also preserves the form and weight of the phone quite well, whereas the TPU case adds significant weight and thickness to the phone in comparison.

I just got a few of these delivered from buyaccess. Delivered in a week and they fit like a glove. Nice ridge around the screen so it won't scratch if you put it face down and extra grip on the sides.
€2 each and free shipping you cannot go wrong. Link to the sellar if anybody wants it.
http://myworld.ebay.ie/buyaccess/?_trksid=p4340.l2559

i am using nillkin tpu case ，absolutely good awesome。I was driving motorbike in raining day.made my hand wet and glutinous 。then using my phone，that is feeling good。not like some case make your hand oily
http://www.ebay.co.uk/itm/150635443...43813&_sacat=See-All-Categories&_fvi=1&_rdc=1

Best Case/Cover/Shell

Just want to know from you guys experience.
Who makes the best cases/covers/shells for samsung?
And if any of you are using cases/shells/covers, which are you using? Would you recomend?
What are your experiences?
I'm not really a fan of the flipcases
Thanks

If you are on a high budget, you could look at the Impact-absorbing Tech21 cases.
Those are of high build quality.

I recently got a casemate tough case for my sgs4 mini and I am very pleased with it, both handling-wise and in terms of general ruggedness.
Did anyone get a screen protector? I loved the exim ultraprotect on my old nokia, but the s4 mini is my first phone with a capacitive touch screen and I am unsure if a screen protector will hurt its responsiveness.

I got a screen protector applied the moment I unpackaged my phone at the shop. They applied a Screenguard branded clear (non-matte) screen protector and responsiveness hasn't been an issue in the 4 weeks I've had the phone.
This screen protector ($4) is a fingerprint magnet though, but it has perfect cut-outs for the light, proximity sensors and front - facing camera as well as the home button.

Case
I just bought a Belkin case named "Grip Sheer Matte" in a blackish-brownish transparent tone for the black S4m (ha! SAM!).
It was 12€ in an electronics store here in .de but you can probably get it cheaper online (see link).
I like the soft and smooth feel. The case fits quite good and protects the back and all edges. The ports and buttons are accessible and the holes on the back for camera and speaker are in the right places.
Cheers,
CS

I bought the original Samsung Flip Cover with view... I think its the best but it was not cheap.

Just got a Samsung Flip Cover without view (which replaces the back cover). After using a ROCK flip case, a MERCURY Fancy Diary flip case and a simple metallic-red non-flip case, the Samsung Flip Cover seems to do its job best. The cover is heavy enough to hold itself down when the phone is facing up, and folds behind nicely such that it is comfortable to hold.

What's the point of having such a small metal bumper? In case of a drop it won't absorb any energy ...

Its probably to protect the original metal rim against scratches and bumps. Good for maintaining the resale value! (The screen protector will protect the front, and the back cover is replaceable)

damn.. i want those pretty and sturdy cases from otterbox, uag, spigen etc

Does the S-View cover also protect the edges?
After almost 2 months I notice that I already have a couple of bumps right on the edge of the screen. I don't want to buy a thick shell since I bought the Mini exactly because of the sleaziness and the S-view looks quite nice..

charliebigpot said:
Does the S-View cover also protect the edges?
After almost 2 months I notice that I already have a couple of bumps right on the edge of the screen. I don't want to buy a thick shell since I bought the Mini exactly because of the sleaziness and the S-view looks quite nice..
Click to expand...
Click to collapse
No. The S-View cover replaces your back cover of the phone. Thus it only protects the back. The sides are exposed except for the left side of the phone where the cover flips over the phone.

Whosat said:
No. The S-View cover replaces your back cover of the phone. Thus it only protects the back. The sides are exposed except for the left side of the phone where the cover flips over the phone.
Click to expand...
Click to collapse
For me the ideal would be a bumper, so that the edges are protected and I'm not carrying around a brick. I'll keep on duckduckgoing and see what I can find..

I've been looking for a decent rubber bumper as well. I've only seen a metal one with a weird branding on the side. Do post here if you manage to find one!

Whosat said:
I've been looking for a decent rubber bumper as well. I've only seen a metal one with a weird branding on the side. Do post here if you manage to find one!
Click to expand...
Click to collapse
I found this one here, http://www.mobilefun.com/40209-flexiframe-samsung-galaxy-s4-mini-bumper-case---black-clear.htm but I might actually get an official samsung case, it looks quite nice: http://www.samsung.com/se/consumer/mobil/mobil/mobiltillbehor/EF-PI919BNEGWW-gallery?subsubtype=bags

make onuond
Will a rubber bumper protect against a drop (say, from table height)? Will the S-view cover protect against a drop?
I wouldn't be bothered by scratch or bumps on the plastic housing. Mainly looking for protection against the screen/digitizer/glass breaking from a fall.

I bought this one.
Fits tightly around the S4 mini and does not add any bulk. The phone still looks very slim and small. Material is of good scratch resistance but probably not a real bumper. It's slightly transparent, so the Samsung logo and the silver pattern of the back cover shines through a bit. Really looks good.

charliebigpot said:
I found this one here, http://www.mobilefun.com/40209-flexiframe-samsung-galaxy-s4-mini-bumper-case---black-clear.htm but I might actually get an official samsung case, it looks quite nice: http://www.samsung.com/se/consumer/mobil/mobil/mobiltillbehor/EF-PI919BNEGWW-gallery?subsubtype=bags
Click to expand...
Click to collapse
I ordered this one:
http://goo.gl/KusTUO
It kind a looks like the "Flexiframe" from mobilefun and for the price you can't go wrong.

axelpix said:
I bought this one.
Fits tightly around the S4 mini and does not add any bulk. The phone still looks very slim and small. Material is of good scratch resistance but probably not a real bumper. It's slightly transparent, so the Samsung logo and the silver pattern of the backt cover shines through a bit. Really looks good.
Click to expand...
Click to collapse
I just received the same case and it is better than expected. Took less than a week from Germany to UK and less than 10 GBP Inc postage.
This case is so small and thin that it doesn't alter the feel of the phone apart from the texture. It'sthin enough to fit in my S2 desktop charger/dock and also my windscreen mount with the case on.

I ordered the following in blue/black. It looks somewhat...different! I hope it's not too much when I put it on the phone. It came to six euros which is reasonable. I'll post my impressions when it arrives.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=171080302080&ssPageName=ADME:L:eek:C:US:3160

Slimmest case that has camera protection?

Basically just what the title asks. Can anyone point me to the slimmest case available that offers some protection for the camera? Thanks in advance.

pieces of cake said:
Basically just what the title asks. Can anyone point me to the slimmest case available that offers some protection for the camera? Thanks in advance.
Click to expand...
Click to collapse
I am using the Spigen one. I think it is the slimmest that still protects for the camera bump.
Sent from my LG-LS997 using Tapatalk

I went through quite a few cases and ended up purchasing the Nillikin case and absolutely love it. I needed a case with added grip and some camera protection.
https://www.amazon.com/dp/B01MAZLX5R/ref=cm_sw_r_cp_apa_B-poybKTP18S5
It does not protect the top and bottom like many snap on cases but is thin and has a raised area around the camera. I'd be comfortable laying the phone on a flat surface now. I have the spigen rugged armor which is thicker and protects the entire phone.

utbiglall said:
I went through quite a few cases and ended up purchasing the Nillikin case and absolutely love it. I needed a case with added grip and some camera protection.
https://www.amazon.com/dp/B01MAZLX5R/ref=cm_sw_r_cp_apa_B-poybKTP18S5
It does not protect the top and bottom like many snap on cases but is thin and has a raised area around the camera. I'd be comfortable laying the phone on a flat surface now. I have the spigen rugged armor which is thicker and protects the entire phone.
Click to expand...
Click to collapse
Looks sweet. Thanks.

Can't comment on Nillkin or Spigen cases, never had them. I went Ringke Fusion on the LG G4 and have never looked back. Received my v20 case today (clear/smoke) and put it on. It's VERY marginally recessed compared to where the camera bump is. Is perfectly flat/balanced on an even surface, so you can operate the phone one-handed on the desk if you need to.
My recommendation is to leave the plastic film on the back of the phone where the camera is, any protection you can give it without affecting photo quality will help. I just need a good screen protector now...
Hope that helps.
RoOSTA

pieces of cake said:
Basically just what the title asks. Can anyone point me to the slimmest case available that offers some protection for the camera? Thanks in advance.
Click to expand...
Click to collapse
I'm using the Encased Slim Shield... I like it. Thin, covers everything (camera protrusion as well), fits perfectly, & feels nice in the hands.

Kief_haring said:
I'm using the Encased Slim Shield... I like it. Thin, covers everything (camera protrusion as well), fits perfectly, & feels nice in the hands.
Click to expand...
Click to collapse
Looks really nice. Thanks for your input.

pieces of cake said:
Looks really nice. Thanks for your input.
Click to expand...
Click to collapse
Nillkin also makes one that is a TPU case. I had it on my N6P & it was really nice. I opted for the Encased this time because I wanted a hard case, TPU never keeps it's full shape after a while..

Spigen... very nice case

Spigen rugged armor.. it's thin, nice looking and protects all that is needed
http://www.spigen.com/collections/lg/products/rugged-armor-lg-v20-case

I tried the Spigen Liquid Crystal Case and it is the most minimalist but doesn't have enough protection in my opinion.
I ended up returning it not for that reason, but due to the "yellow" tone of the case itself...I contacted Spigen and they are looking into replacements.
I purchased the Ringke [Fusion] Clear PC Back TPU Bumper in Smoked Black...perfect fit and better protection that looks great with the Titan V20.
https://www.amazon.com/gp/product/B01K5I9IKE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
View attachment 3953115

If you want something with protection while being slim, I'd suggest the UAG LG V20 Plasma Feather-Light Rugged. Been using it since I got my V20 and it's slim and light with plenty of grip, originally I thought that it'll be big and bulky like the OtterBox cases but it's slim enough and knowing it's UAG you don't really have to worry about protection. Even tho it's pricy it's worth it.

You can consider using the Verus crystal bumber case, this and others like spigen to name a few are your only option, just keep the protection film on for added protection, for me I also added a tempered glass protector for both camera lens without any affect what so ever.

utbiglall said:
I went through quite a few cases and ended up purchasing the Nillikin case and absolutely love it. I needed a case with added grip and some camera protection.
https://www.amazon.com/dp/B01MAZLX5R/ref=cm_sw_r_cp_apa_B-poybKTP18S5
It does not protect the top and bottom like many snap on cases but is thin and has a raised area around the camera. I'd be comfortable laying the phone on a flat surface now. I have the spigen rugged armor which is thicker and protects the entire phone.
Click to expand...
Click to collapse
I ended up buying this case. It arrived today and my search is now over. There's simply no way a V20 case could be slimmer than the Nillikin while still offering camera protection. It's awesome. EXACTLY what I was looking for, so thank you!
The top and bottom are protected well enough with the lip extensions on each end.

I bought this off aliexpress, and it's pretty great. perfect fit and some improvement in grip.
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=6497&page=1
downside is, it's glossy and quite the fingerprint magnet especially in a humid country like SG, and the alignment is slightly off for the fingerprint/home button.
otherwise, the port covers are awesome and it'll definitely prevent the lint buildup.
looking to get a tempered glass next.
also, for SG sets, it comes with a promotional pack of 3 back protectors and 2 iRing and a screen protector. will upload pictures soon!

pieces of cake said:
I ended up buying this case. It arrived today and my search is now over. There's simply no way a V20 case could be slimmer than the Nillikin while still offering camera protection. It's awesome. EXACTLY what I was looking for, so thank you!
The top and bottom are protected well enough with the lip extensions on each end.
Click to expand...
Click to collapse
I agree, one of the thinniest case around with the best protection, the case has a built in dust cap for both the charging port and headphone socket.

kms108 said:
I agree, one of the thinniest case around with the best protection, the case has a built in dust cap for both the charging port and headphone socket.
Click to expand...
Click to collapse
I'm guessing you have no idea who you were quoting there, eh?

pieces of cake said:
I'm guessing you have no idea who you were quoting there, eh?
Click to expand...
Click to collapse
Actually it was you who I quoted, but I though you went for the tpu one by nillkin, not the hard case, so yes, it was a mistake on my part.

The Spigen Rugged Armor. 12 bucks on Amazon.

Evocell $10 or less. 3 layered case with holster. Thin and protective. Found on Amazon. Search Evocell LGV20.
Sent from my LG-H918 using Tapatalk

Question Latercase arrived

My Latercase finally arrived today.
Feels really nice in the hand a la Aramid case that I had with the ZF3. Thinner than the OEM "Thin Case w/Kickstand". I am debating buying one of those stick-on kickstands from Amazon because it is nice to have an instant kickstand every once in awhile, without the added thickness.
Because it's a "Cyber edition", it wobbles on a table. Probably doesn't bother me because I don't use the ZF4 sitting flat like that.

Looks good.

@mickliq can you please share some photos of inside? Weather it has raised edges to protect the screen or not? The below one i got from ebay and its flawed at corners and does not have raised edges

They're totally flush. Not sure these are the best pics but gives you an idea.

Added ESR kickstand. In this position, it can still wirelessly charge. Not perfect but decent compromise.

FYI - I've been very happy with this ultra-thin kickstand that I added to mine, much thinner than anything else I've seen. This is on mounted on the Spigen Slim Armor Pro case. And wireless charging still works just fine.
https://www.amazon.com/dp/B0B1JL6D2Z

eswar539 said:
@mickliq can you please share some photos of inside? Weather it has raised edges to protect the screen or not? The below one i got from ebay and its flawed at corners and does not have raised edges
Click to expand...
Click to collapse
On mine, the right side that covers the back with the camera does come up creating a lip, but just ever so slightly. The other side is quite flush. Having that lip isnt something you'd expect from a thin fitting case anyway.
On the front screen though, there's definitely a lip that will keep your screen off the table. For the inside, Samsung already has that built into the phone, so for the most part, its safe to open the fold and put it face down, but... i just wouldnt...