Related
I currently have a hard silicone back cover case on my phone but it becomes extremely slippery if I don't continuously wash it.
The back is completely smooth and I am terrified of dropping it.
I need to find a case that actually has a texture or some form of grip and keeping it under $20.
Otterbox Impact Case looks awesome, but I haven't found any good feedback on if its made from silicone that looses grip and goes slippery.
Does anyone have any suggestions?
Thanks.
Amzer jelly case. Lots of colors, terrific feel, padded corners, textured grip area, good lens protection, and so cheap on eBay you can get them for less than burgers. And if you're someone who swaps out batteries, or has a car or desk dock that wants a naked phone, they're easily removable.
Thank you for the reply.
I've had silicone cases that would lift up when ever you would slide to one side or the other.
How are the edges on the sides of the screen?
Also, anyone know how the otterbox impact cars are?
Sent from my HTC Evo via the XDA app.
The Amzer just barely wraps over the sides of front face of the screen, maybe 3/32". The bottom comes up about an eighth, and the top is cut out to clear the light sensor, speaker and front camera. I've not had issues at the edges, but I can't say if that's how I use it.
I don't think the Otterbox is in anyone's hands yet.
VW91N3 said:
The Amzer just barely wraps over the sides of front face of the screen, maybe 3/32". The bottom comes up about an eighth, and the top is cut out to clear the light sensor, speaker and front camera. I've not had issues at the edges, but I can't say if that's how I use it.
I don't think the Otterbox is in anyone's hands yet.
Click to expand...
Click to collapse
Alright, thanks for the info.
I am terrified of the sides being lose enough for anything to slide between them and my phone and cause my phone some damage.
(http://www.youtube.com/watch?v=cUT8179c2lc - at ~1:20 you an see the sides of this case being crazy loose)
I was hoping someone that had an otterbox impact on a similar phone would have a comment on if the cases texture or fit was an issue.
Thanks again.
Sent from my HTC Evo via the XDA app.
The Amzer isn't as thin. I've not had the pull-away issues, but then, I won't carry a glass phone in a pants pocket, either. I usually carry mine in my shirt pocket.
http://www.youtube.com/watch?v=u6HBMlMU3CM
Looks like they're going for about eight bucks on eBay, including shipping.
Hi again,
I added grip tape (left over from a skateboard deck) to my current case...lol.
It serves its purpose very well, but looks awful.
I have a chance to get the Platinum Case (Best Buy) for $10.
Anyone have any comments on this one?
Does it go slippery or feel like it could slip out of your hands?
EDIT: I just bought the case. I read some good reviews on it... guess I'll see once it arrives.
i've been looking around for a thin case for my new evo.
i just ordered a barely there case b/c it was the thinnest with camera protection. all the cases i've read about or see online do one or the other. either protect the camera or add too much bulk in the front (or doesn't protect the camera lens).
has anyone found a case that has a slight "lip" to protect the lcd when laying it down lcd down AND also covers up the camera "ring" when laying it down camera down?
or is this just too much to ask?
The Incipio Edge is probably the thinnest that provides both protections. I had the Seidio Innocase for a while, it was rather thin and protected both. I just wish the Edge and the Barely There came in colors other than pink and black. I really don't want my phone to look like a Hot Topic fat chick circa 2002.
I don't know if the Ringke Rearth cases add bulk but they definitely have a lip to protect the lcd and also have your camera covered.
I used to use the barely there, but I stopped because I got an extended battery, and will not be going back to it because I don't like that it creates tiny scratches on the sides.
I have an Amzer tpu argyle case. Its very nice, good fit, rubbery bit not sticky, face and camera protection. Found it at amazon for about $10. It looked semi-scuffed when I opened it but I cleaned it with windex amd after a couple days the scuffs dissapeared
metalfan78 said:
I have an Amzer tpu argyle case. Its very nice, good fit, rubbery bit not sticky, face and camera protection. Found it at amazon for about $10. It looked semi-scuffed when I opened it but I cleaned it with windex amd after a couple days the scuffs dissapeared
Click to expand...
Click to collapse
You can also grab them on ebay too. I have a TPU case on my EVO, it is perfect.
Mindspin_311 said:
You can also grab them on ebay too. I have a TPU case on my EVO, it is perfect.
Click to expand...
Click to collapse
Can you please share with a url to ebay to what your case looks like? I'm interested, thanks!
ro_bro said:
Can you please share with a url to ebay to what your case looks like? I'm interested, thanks!
Click to expand...
Click to collapse
Anything on this page will suffice
http://shop.ebay.com/?_from=R40&_tr...kw=htc+evo+tpu+case&_sacat=See-All-Categories
I personally have this one, it fits great.
http://cgi.ebay.com/Smoke-TPU-Rubbe...957108?pt=PDA_Accessories&hash=item2eb4271a34
+1 Seidio Innocase II Suface
Double....
I used this case for a while before getting a hard one. I thought it protected the phone pretty well.
Mindspin_311 said:
Anything on this page will suffice
http://shop.ebay.com/?_from=R40&_tr...kw=htc+evo+tpu+case&_sacat=See-All-Categories
I personally have this one, it fits great.
http://cgi.ebay.com/Smoke-TPU-Rubbe...957108?pt=PDA_Accessories&hash=item2eb4271a34
Click to expand...
Click to collapse
Nice case. Thanks
has anyone found a case that has a slight "lip" to protect the lcd when laying it down lcd down AND also covers up the camera "ring" when laying it down camera down?
The Rearth Rinke case is what you're looking for. Protects both the camera and lcd. Only adds about 2mm to the width of the phone. Fit, finish and attention to detail are perfect. Even a cutout for the HTC logo on the back. Not flimsy on the sides like the Otterbox Impact.
has anyone found a case that has a slight "lip" to protect the lcd when laying it down lcd down AND also covers up the camera "ring" when laying it down camera down?
The Rearth Rinke case is what you're looking for. Protects both the camera and lcd. Only adds about 2mm to the width of the phone. Fit, finish and attention to detail are perfect. Even a cutout for the HTC logo on the back. Not flimsy on the sides like the Otterbox Impact.
natethedog said:
has anyone found a case that has a slight "lip" to protect the lcd when laying it down lcd down AND also covers up the camera "ring" when laying it down camera down?
The Rearth Rinke case is what you're looking for. Protects both the camera and lcd. Only adds about 2mm to the width of the phone. Fit, finish and attention to detail are perfect. Even a cutout for the HTC logo on the back. Not flimsy on the sides like the Otterbox Impact.
Click to expand...
Click to collapse
Check out the ebay cases I posted
I just got this case from eBay for around $5 USD and I am so impressed with it I had to write a quick review. I think the name brand is Fusion.
-The fit of the case is just perfect. Very snug.
-The thickness is just enough to protect the camera lens and screen without adding much bulk.
-The sides of the case have a nice texture to make it very easy to grip.
-The TPU material doesn't attract lint and is very easy to slide in and out of your pocket.
-All of the holes match up fine.
-The buttons on the sides of the phone are covered but in my opinion this makes the pressure required just right so you don't accidentally press them.
The only negative at all is that the hole for the headphone jack may be too small for some plugs. The Samsung headphones and my Bose headphones fit just fine though. (Update: My Bose speakers I had to trim a little plastic off of the audio cable but it fits fine now.)
Here is the eBay link if anybody wants one. This guy shipped one to me in 2 days in the US.
http://cgi.ebay.com/Clear-Fusion-Samsung-Galaxy-S2-i9100-TPU-COVER-CASE-/260780906673?pt=PDA_Accessories&hash=item3cb7c0d8b1
If you're willing to wait a few days more, you can get them for 2,5$ in Dealextreme.
I have exactly the same one, purchased for £2.95 off ebay in the UK, and I would agree with all the points outlined above.
bought two of them from Dealextreme, but in black color, best TPU
Do they make them in matte black?
I ordered a similar one from eBay on the 14th, and it arrived today. Fits pretty well and leaves a bit of a bumper around the display, adding a bit of protection.
bmstrong said:
Do they make them in matte black?
Click to expand...
Click to collapse
I believe I saw a matte black on Dealextreme. Most of the black ones I've seen are part matte, part glossy.
http://www.amazon.co.uk/SAMSUNG-GALAXY-SCREEN-PROTECTOR-ACCESSORIES/dp/B004WO6ISI/ref=sr_1_23?s=electronics&ie=UTF8&qid=1306245039&sr=1-23
The thickness is just enough to protect the camera lens and screen without adding much bulk.
Click to expand...
Click to collapse
Hard to tell from the image, but isnt that simply a hole in the case where they camera lense is, so offers no protection for the lens at all??
Its an impossible task trying to find a case that offers protection for the camera.. they are so hi spec and good quality these days, the last thing you want is muck or scratches on the optics.. surely a case designer can be innovative enough to design some sort of sliding cover....
I purchased the Black one as well. However, the glossy part scratches too easily. Handle with care.
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Artius89 said:
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Click to expand...
Click to collapse
It's true, that was my experience with this TPU case as well. Dust would pile up on the edges of the screen and under the TPU lining. I'd have to constantly take off the TPU case and wipe the screen to keep my SGS2 nice and pretty. With the official Samsung vent case i can simply wipe the screen clean in one go without taking off the case. Sure, the official case offers less protection, but it also preserves the form and weight of the phone quite well, whereas the TPU case adds significant weight and thickness to the phone in comparison.
I just got a few of these delivered from buyaccess. Delivered in a week and they fit like a glove. Nice ridge around the screen so it won't scratch if you put it face down and extra grip on the sides.
€2 each and free shipping you cannot go wrong. Link to the sellar if anybody wants it.
http://myworld.ebay.ie/buyaccess/?_trksid=p4340.l2559
i am using nillkin tpu case ，absolutely good awesome。I was driving motorbike in raining day.made my hand wet and glutinous 。then using my phone，that is feeling good。not like some case make your hand oily
http://www.ebay.co.uk/itm/150635443...43813&_sacat=See-All-Categories&_fvi=1&_rdc=1
For those interested, here is my OTTERBOX COMMUTER vs CASE MATE TOUGH comparison. I now own both of these cases and found some interesting differences.
OTTERBOX COMMUTER
+ Very solid case 9/10
+ Rubber has extra cushioning bumpers on corners to better protect against drops
+ Cutouts also have secure plugs to prevent dust and water from intrusion
+ top, bottom and sides have hard plastic protection over the rubber making a more secure fit all round.
+ Rubber is of a higher quality 8/10
- Sound quality of speaker phone is slightly affected by the raised plastic that sits closely around the speaker. Sound comes out a little louder and sharper but still sounds fine.
- Case can be quite difficult to remove because the plastic cover sits over all four sides and is very tight
- Plastic cover surface is very smooth and nicely designed but will be slippery with oily or sweaty hands
- Screen protector cutout is a little short near the top where the earphone is compared to other screen protectors I've used, but quality is fine, average.
- headphone and charging ports are a little smaller than I'd like but should fit most accessories.
- ON and VOLUME buttons are a bit difficult to press, quite like most TPU cases
- Having plastic covering on the front sides, it can be easily knocked off a table when sitting face-down, and back down is even worse.
CASE MATE TOUGH
+ Very solid case 8/10
+ headphone and earphone ports are a perfectly cut to fit all brands.
+ Very easy to remove with only sides covered by plastic cover
+ Plastic material has excellent grip on sides and back making it much more secure in the hand.
+ Plastic is less likely to show scratches over time
+ Quite easy to remove with only the sides cover the the plastic cover.
+ ON and VOLUME buttons are very easy and nice to press, with perfect feedback, almost a little 'too' easy actually.
+ The entire front is rubber, so when sitting face-down, it does not move and has a secure grip on surfaces, less likely to be knocked of a table etc
- Because the plastic cover only sits over the sides, the top and bottom have the rubber exposed and it could catch on things, such as removing from a tight pocket. not a huge deal in use.
- headphone and charging ports are open and exposed.
- rubber is a little thinner than the Otterbox's and more stretchy/flexible, though may not be a big deal in use/drops.
So in conclusion, I really like both cases for different reasons. At first impressions, the Commuter appears to be the better case due to it's port covers, more secure fit with plastic covering all sides and the extra protection given to the corners of the case.....BUT....
....the Tough case just feel better in the hand, more secure. While both are almost identical in size, thickness and weight, the Tough has a nicely textured hard surface (that looks like rubber in photos) and this is what I would call 'active' protection, compared to the passive protection on the Otterbox. What I mean is that the Commuter is more likely to slip out of the hand, but be better against drops, and the Tough case is less likely to slip out of your hands, but make be less effective against drops. Also with the Tough case having rubber all the way around on the front, it's rock solid when sitting face down on a table surface and less likely to be knocked off.
Also, if you like to change your case on a fairly regular basis, the Otterbox is not an easy case to remove. Not that difficult, but the Tough is about 3x easier. This is a big deal for me, and combined with the nice secure feel, the Case Mate Tough is the preferred case for me as a daily wearer. If there are days where I feel I may need some extra protection against, say rain, I may be a little more inclined to throw on the Otterbox Commuter.
Either way you can't go wrong as both are great cases.
leicashot, any chance of any piccies with the Galaxy in the commuter case ? I'm thinking of getting one for my shiny new precious !
Also, do you have a car holder of any type that fits with the commuter on it ?
Do provide pics of these two cases if possible...
Interesting! I always wanted to compared them, but I dont wanna buy those cases because I know i would never use them after.
abhifusion said:
Do provide pics of these two cases if possible...
Click to expand...
Click to collapse
Will try take some pics later today....
do these cases come with screen protectors or no?
My tough case did not come with a screen protector which is fine by me since I hate them. Bout all I can say is that I had the tough case on my sgs2 both of which I got when they came out (each respectively, the case followed by a week or two) and have no complaints about it. Phone lived through a few drops one of which was standing in the back of a pickup to unload stuff and it fell out of my pocket onto the pavement, some 6 or 7 feet I would guess. The phone was fine and the case showed no mark whatsoever. I have not had any issue with the rubber on the ends sticking to anything and it does not pick up lint. The phone is easy to get in and out of the case but still completely secure in it and wont come out unless you take it out. The case has no movement on the phone and feels solid. The texture on the case is just about perfect for grip and more has an undefineable "good" feel. The ports and all openings line up perfectly with the headphone and microusb ports being opened up a little extra to let larger based headphone jacks or usb cables fully insert to their base. Something I appreciate because I have some headphones that sometimes wont go in without trimming the case.
To be honest I only see one real downside to this case and its going to come down to preference. If you want your phone as slim as possible this case isn't for you. The lip around the top is probably near two millimeter by itself and while it fits like a glove you have the width of both the rubber and case across the bottom and sides. To someone like me its a win because I think modern phones are too thin and I would want to do something to bulk them up even if I didn't need the protection.
I considered the otterbox to try something new but did not. I have no beef with it and it seems like folks that have them like them but for me it was hard to get away from something I knew worked great and for which I had no gripes.
I have a Case Mate tough too and i realy like, i used it on all my phones i had.
Here are some pics http://www.case-mate.com/Samsung-Galaxy-S-III-Cases/Case-Mate-Samsung-Galaxy-S3-Tough-Cases.asp.
Never had the Otterbox but it looks clunkier and bigger, the Case Mate is a bit more elegant and has a good grip and feel.
Do any owners of either case use them in car holders at all ? If so any chance of pics in the car holder ? Also, does the case interfere with the operation of NFC at all ?
Hey guys,
I have the CaseMate Though since last week when i got my S3.
Before that I had the Otterbox Commuter on my DHD and I must say, I like the CaseMate much better. It may does not protect the ports as already said, but it does feel very good in my hand.
Car mounting is not a problem for me, I have an universal holder in which it will fit in easily
leicashot said:
Don't mean to be negative but I got the case today and it feels great except I'll be returning it. Why? Because the top front and bottom front of the case don't have hard plastic holding down the rubber lips, so they get caught and stretch in the pocket when retrieving. This over time may cause the rubber to tear or stretch too much cause it's very elastic and thin.
Whereas the Otterbox Commuter has the plastic sides cover top, bottom and both sides so that no rubber is loose, but held down tight. A much better product from my experience in the past and looking forward to having it when it arrives in the next week or so. This review will cover what I was talking about. http://www.youtube.com/watch?v=21Dxcyfm3Vg
UPDATE: See my review on both cases here. http://forum.xda-developers.com/showthread.php?p=27997216#post27997216
Click to expand...
Click to collapse
I read a negative point about Tough case from you in another thread. Didn't see it mentioned here.
So is this problem a big thing or can i go with Tough case?
I have the Otterbox Commuter case on my S3 and I love it!! I had a defender case on my Tbolt and it added weight and size to it. I did not like it for that reason. The commuter case for the S3 fits just right and doesnt take away from the size that much. I have to believe this is a must have case for some protection for your phone.
anyone know if the case mate tough fit the active holster because it does appear to be the same size as the commuter
What are the dimensions of the case mate tough.
Nice review! Have u ever used the incipio silicrylic? seems very much comparable to the Case-Mate Tough and I dont know which one to choose.. Heres a link http://www.amazon.com/Incipio-SA-302-Silicrylic-Silicone-Samsung/dp/B0085VAP38/ref=sr_1_2?s=wireless&ie=UTF8&qid=1353870767&sr=1-2&keywords=incipio+s3
Hi, just got my casemate tough for the galaxy s4. I've been using one with my galaxy s3 and am very pleasedwith it but, unfortunately the one for the s4 is a bit disappointing. Although the look is the same the lip around the screen isn't as deep and the rubber doesn't come over the metal border fully. The volume button only has the rubber over it without the plastic surrounding which makes it feel fragile. I'll be returning the case and have ordered an otterbox commuter, although I would've preferred the casemate. Hope it's helpful.
I have 2 brand new Otterbox Defender series warranty replacements for sale, a Grey on white and Black on black with clip holsters for sale. Looking to sell both for cheap in a bundle. Shoot me a PM if your interested.
Sent from my SM-N900P using Tapatalk 2
Just want to know from you guys experience.
Who makes the best cases/covers/shells for samsung?
And if any of you are using cases/shells/covers, which are you using? Would you recomend?
What are your experiences?
I'm not really a fan of the flipcases
Thanks
If you are on a high budget, you could look at the Impact-absorbing Tech21 cases.
Those are of high build quality.
I recently got a casemate tough case for my sgs4 mini and I am very pleased with it, both handling-wise and in terms of general ruggedness.
Did anyone get a screen protector? I loved the exim ultraprotect on my old nokia, but the s4 mini is my first phone with a capacitive touch screen and I am unsure if a screen protector will hurt its responsiveness.
I got a screen protector applied the moment I unpackaged my phone at the shop. They applied a Screenguard branded clear (non-matte) screen protector and responsiveness hasn't been an issue in the 4 weeks I've had the phone.
This screen protector ($4) is a fingerprint magnet though, but it has perfect cut-outs for the light, proximity sensors and front - facing camera as well as the home button.
Case
I just bought a Belkin case named "Grip Sheer Matte" in a blackish-brownish transparent tone for the black S4m (ha! SAM!).
It was 12€ in an electronics store here in .de but you can probably get it cheaper online (see link).
I like the soft and smooth feel. The case fits quite good and protects the back and all edges. The ports and buttons are accessible and the holes on the back for camera and speaker are in the right places.
Cheers,
CS
I bought the original Samsung Flip Cover with view... I think its the best but it was not cheap.
Just got a Samsung Flip Cover without view (which replaces the back cover). After using a ROCK flip case, a MERCURY Fancy Diary flip case and a simple metallic-red non-flip case, the Samsung Flip Cover seems to do its job best. The cover is heavy enough to hold itself down when the phone is facing up, and folds behind nicely such that it is comfortable to hold.
What's the point of having such a small metal bumper? In case of a drop it won't absorb any energy ...
Its probably to protect the original metal rim against scratches and bumps. Good for maintaining the resale value! (The screen protector will protect the front, and the back cover is replaceable)
damn.. i want those pretty and sturdy cases from otterbox, uag, spigen etc
Does the S-View cover also protect the edges?
After almost 2 months I notice that I already have a couple of bumps right on the edge of the screen. I don't want to buy a thick shell since I bought the Mini exactly because of the sleaziness and the S-view looks quite nice..
charliebigpot said:
Does the S-View cover also protect the edges?
After almost 2 months I notice that I already have a couple of bumps right on the edge of the screen. I don't want to buy a thick shell since I bought the Mini exactly because of the sleaziness and the S-view looks quite nice..
Click to expand...
Click to collapse
No. The S-View cover replaces your back cover of the phone. Thus it only protects the back. The sides are exposed except for the left side of the phone where the cover flips over the phone.
Whosat said:
No. The S-View cover replaces your back cover of the phone. Thus it only protects the back. The sides are exposed except for the left side of the phone where the cover flips over the phone.
Click to expand...
Click to collapse
For me the ideal would be a bumper, so that the edges are protected and I'm not carrying around a brick. I'll keep on duckduckgoing and see what I can find..
I've been looking for a decent rubber bumper as well. I've only seen a metal one with a weird branding on the side. Do post here if you manage to find one!
Whosat said:
I've been looking for a decent rubber bumper as well. I've only seen a metal one with a weird branding on the side. Do post here if you manage to find one!
Click to expand...
Click to collapse
I found this one here, http://www.mobilefun.com/40209-flexiframe-samsung-galaxy-s4-mini-bumper-case---black-clear.htm but I might actually get an official samsung case, it looks quite nice: http://www.samsung.com/se/consumer/mobil/mobil/mobiltillbehor/EF-PI919BNEGWW-gallery?subsubtype=bags
make onuond
Will a rubber bumper protect against a drop (say, from table height)? Will the S-view cover protect against a drop?
I wouldn't be bothered by scratch or bumps on the plastic housing. Mainly looking for protection against the screen/digitizer/glass breaking from a fall.
I bought this one.
Fits tightly around the S4 mini and does not add any bulk. The phone still looks very slim and small. Material is of good scratch resistance but probably not a real bumper. It's slightly transparent, so the Samsung logo and the silver pattern of the back cover shines through a bit. Really looks good.
charliebigpot said:
I found this one here, http://www.mobilefun.com/40209-flexiframe-samsung-galaxy-s4-mini-bumper-case---black-clear.htm but I might actually get an official samsung case, it looks quite nice: http://www.samsung.com/se/consumer/mobil/mobil/mobiltillbehor/EF-PI919BNEGWW-gallery?subsubtype=bags
Click to expand...
Click to collapse
I ordered this one:
http://goo.gl/KusTUO
It kind a looks like the "Flexiframe" from mobilefun and for the price you can't go wrong.
axelpix said:
I bought this one.
Fits tightly around the S4 mini and does not add any bulk. The phone still looks very slim and small. Material is of good scratch resistance but probably not a real bumper. It's slightly transparent, so the Samsung logo and the silver pattern of the backt cover shines through a bit. Really looks good.
Click to expand...
Click to collapse
I just received the same case and it is better than expected. Took less than a week from Germany to UK and less than 10 GBP Inc postage.
This case is so small and thin that it doesn't alter the feel of the phone apart from the texture. It'sthin enough to fit in my S2 desktop charger/dock and also my windscreen mount with the case on.
I ordered the following in blue/black. It looks somewhat...different! I hope it's not too much when I put it on the phone. It came to six euros which is reasonable. I'll post my impressions when it arrives.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=171080302080&ssPageName=ADME:L:eek:C:US:3160