Related
I have soft-bricked my phone by trying to install a different kernel and ROM on my Pro Duos B5512.
Flashing only the kernel in the thread by championswimmer didn’t work because of a md5 mismatch.
This guide should also work with other samsung models if you find the right firmware (search on http://www.mod2xtreme.com/ or http://forum.xda-developers.com/showthread.php?t=1656825)
All credits go to manoranjan2050 for his great work in uploading the firmware for all the samsung galaxy y devices!
Go here to find the firmware package for the y pro duos
http://www.mod2xtreme.com/showthread...-Firmware-List
There I downloaded the latest firmware for Europe. Using Odin3 v1.85 I flashed successful and my phone is back up and running!
Here is a step by step:
1. Download and install KIES by Samsung (Odin needs these drivers to work)
2. Download odin3 1.85 (search on xda)
3. Download a firmware pack on mod2extreme
4. Open Odin and put the phone into download mode (volume down+Home+power, then select volume up to enter download mode)
5. Wait for your computer the finish the automatic driver program and your computer should recognize your phone
6. Now select the following files in ODIN (make shure auto reboot and F. reset time is selected)
-> PIT is the .pit file in the firmware map, the box in ODIN to Re-partition should be automatically checked now (if there isn't a pit file then this remains empty)
-> BOOTLOADER, select the file which has BOOT in the file name
-> PDA, select the file which contains PDA in the file name
-> PHONE, select here the file which has MODEM in the file name
-> CSC, select the file which has CSC in the file name
Info:For Save Use Do Not Use Boot loader and pit file. Do this only if everything else failed!
When everything is set-up click start and keep your fingers crossed! When everything goes according to plan your phone should restart, copy some files to system and the reboot again. Your phone is back to life! (boot could take 2-3 min)
Hope you fix your phone!
Here is a screen of ODIN when everything is finished:
Carlovn said:
I have soft-bricked my phone by trying to install a different kernel and ROM on my Pro Duos B5512.
Flashing only the kernel in the thread by championswimmer didn’t work because of a md5 mismatch.
This guide should also work with other samsung models if you find the right firmware
Searching the web for a complete firmware pack I found this forum:
http://www.mod2xtreme.com/showthread...-Firmware-List
There I downloaded the latest firmware for Europe. Using Odin3 v1.85 I flashed successful and my phone is back up and running!
Here is a step by step:
1. Download and install KIES by Samsung (Odin needs these drivers to work)
2. Download odin3 1.85 (search on xda)
3. Download a firmware pack on mod2extreme
4. Open Odin and put the phone into download mode (volume down+Home+power, then select volume up to enter download mode)
5. Wait for your computer the finish the automatic driver program and your computer should recognize your phone
6. Now select the following files in ODIN (make shure auto reboot and F. reset time is selected)
-> PIT is the .pit file in the firmware map, the box in ODIN to Re-partition should be automatically checked now (if there isn't a pit file then this remains empty)
-> BOOTLOADER, select the file which has BOOT in the file name
-> PDA, select the file which contains PDA in the file name
-> PHONE, select here the file which has MODEM in the file name
-> CSC, select the file which has CSC in the file name
When everything is set-up click start and keep your fingers crossed! When everything goes according to plan your phone should restart, copy some files to system and the reboot again. Your phone is back to life! (boot could take 2-3 min)
Hope you fix your phone!
Here is a screen of ODIN when everything is finished:
Click to expand...
Click to collapse
Nice explanation..
1. Suggestion..
Add "[GUIDE]" to your thread name.. It helps to identify what it is in mobile xda app.. and change mobile name to galaxy y variants.. As i suppose your guide covers both y duos and y phones... And lastly add link to manoranjan2050's thread (link)who is doing great work of providing all latest stock firmware updates to both duos of galaxy y.. So anyway good info..
hit thanks button! If above post helps you..
Sent from my GT-S6102
Uploading Odin Pack For Galaxy Y Pro Duos User................. 23% With 23-30 kbps Internet...........
Info:For Save Use Do Not Use Boot loader and pit file........:good::good:
U Can Also Find My Thread/Post @ http://www.mod2xtreme.com
Thanks for the suggestions and heads up guys! Will change those things.
And I will name manoranjan2050 for the credits!
Carlovn said:
Thanks for the suggestions and heads up guys! Will change those things.
And I will name manoranjan2050 for the credits!
Click to expand...
Click to collapse
dude the download link dosnt work..
Thaks for the great guide. In Nitubhaskar's compact kernel thread for our device he gave advice on how to flash stock kernel and recover from soft brick in case you brick phone while flashing custom kernel. Can you add some of that info here and credit the appropriate persons? It would be great to have all relevant soft brick info for our device. Yor thread is dedicated to recovering from soft brick and so would be the best place to have all the facts in one piece
Sent from my GT-B5512 using Tapatalk 2
Carlovn said:
I have soft-bricked my phone by trying to install a different kernel and ROM on my Pro Duos B5512.
Flashing only the kernel in the thread by championswimmer didn’t work because of a md5 mismatch.
This guide should also work with other samsung models if you find the right firmware (search on http://www.mod2xtreme.com/ or http://forum.xda-developers.com/showthread.php?t=1656825)
All credits go to manoranjan2050 for his great work in uploading the firmware for all the samsung galaxy y devices!
Go here to find the firmware package for the y pro duos
http://www.mod2xtreme.com/showthread...-Firmware-List
There I downloaded the latest firmware for Europe. Using Odin3 v1.85 I flashed successful and my phone is back up and running!
Here is a step by step:
1. Download and install KIES by Samsung (Odin needs these drivers to work)
2. Download odin3 1.85 (search on xda)
3. Download a firmware pack on mod2extreme
4. Open Odin and put the phone into download mode (volume down+Home+power, then select volume up to enter download mode)
5. Wait for your computer the finish the automatic driver program and your computer should recognize your phone
6. Now select the following files in ODIN (make shure auto reboot and F. reset time is selected)
-> PIT is the .pit file in the firmware map, the box in ODIN to Re-partition should be automatically checked now (if there isn't a pit file then this remains empty)
-> BOOTLOADER, select the file which has BOOT in the file name
-> PDA, select the file which contains PDA in the file name
-> PHONE, select here the file which has MODEM in the file name
-> CSC, select the file which has CSC in the file name
Info:For Save Use Do Not Use Boot loader and pit file. Do this only if everything else failed!
When everything is set-up click start and keep your fingers crossed! When everything goes according to plan your phone should restart, copy some files to system and the reboot again. Your phone is back to life! (boot could take 2-3 min)
Hope you fix your phone!
Here is a screen of ODIN when everything is finished:
Click to expand...
Click to collapse
LINK is not working b5512 stock framework
sphoenixp said:
LINK is not working b5512 stock framework
Click to expand...
Click to collapse
yes.. seems links are not working.. but a quick search on google gave me these links.. i dont have phone.. so cant test it..
Link
Another link
Carlovn said:
I have soft-bricked my phone by trying to install a different kernel and ROM on my Pro Duos B5512.
Flashing only the kernel in the thread by championswimmer didn’t work because of a md5 mismatch.
This guide should also work with other samsung models if you find the right firmware (search on http://www.mod2xtreme.com/ or http://forum.xda-developers.com/showthread.php?t=1656825)
All credits go to manoranjan2050 for his great work in uploading the firmware for all the samsung galaxy y devices!
Go here to find the firmware package for the y pro duos
http://www.mod2xtreme.com/showthread...-Firmware-List
There I downloaded the latest firmware for Europe. Using Odin3 v1.85 I flashed successful and my phone is back up and running!
Here is a step by step:
1. Download and install KIES by Samsung (Odin needs these drivers to work)
2. Download odin3 1.85 (search on xda)
3. Download a firmware pack on mod2extreme
4. Open Odin and put the phone into download mode (volume down+Home+power, then select volume up to enter download mode)
5. Wait for your computer the finish the automatic driver program and your computer should recognize your phone
6. Now select the following files in ODIN (make shure auto reboot and F. reset time is selected)
-> PIT is the .pit file in the firmware map, the box in ODIN to Re-partition should be automatically checked now (if there isn't a pit file then this remains empty)
-> BOOTLOADER, select the file which has BOOT in the file name
-> PDA, select the file which contains PDA in the file name
-> PHONE, select here the file which has MODEM in the file name
-> CSC, select the file which has CSC in the file name
Info:For Save Use Do Not Use Boot loader and pit file. Do this only if everything else failed!
When everything is set-up click start and keep your fingers crossed! When everything goes according to plan your phone should restart, copy some files to system and the reboot again. Your phone is back to life! (boot could take 2-3 min)
Hope you fix your phone!
Here is a screen of ODIN when everything is finished:
Click to expand...
Click to collapse
Hi, I have not used odin before, but my phone (B5512 galaxy y pro duos)
has a firmware from another country and I want to have my own
(because then I can write in my language). I have downloaded a file which
has "modem"," csc" and "pda" files only and it's the firmware other people
from my country have (B5512XXLF2) . I think my phone has Polish firmware (B5512XXLL1)
while I want the Greek one. Also, these two types seem the same
(the only difference in the code is the year month and version)
but one has greek keyboard and the other doesn't, what's the deal with that?
Will this method work for me? If not can I recover my phone?
I have not done this before and the phone is less than a month old and I am scared!
Thank you.
Recovery via odin should be possible. As for flashing Greek firmware I recommend you talk to Deadly or another expert via PM before proceeding.
Sent from my GT-B5512 using Tapatalk 2
arbayong said:
Recovery via odin should be possible. As for flashing Greek firmware I recommend you talk to Deadly or another expert via PM before proceeding.
Sent from my GT-B5512 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the information, i will try to communicate with someone
No change
Ok, I flashed the phone with the firmware some other people from Greece had, but nothing has changed. I still don't have greek language on my physical keyboard. Can anyone help, please?
i wanna just update 5512 and i download rom for egypt and this rom one file ( one package)
where put md5 ? PDA or where ?
thnQ
Good work op,helpful explianation...
Hey guys,
The GT-N7100 of my friend does not boot.It is stuck at the first screen ( Black screen with samsung galaxy note II gt-n7100).
He tried to install a custom rom and installed a Custom Recovery. In Custom Recovery the cache partition couldnt be load. So I cant wipe or format anything. If I want to install a zip, the Recovery just get stuck before even selecting a zip file.
I can access download mode. So I tried to flash another recovery. Odin says successful but the recovery is still the same ????
I also tried to flash a stock rom with Odin... nothing changed
So I dont know what to do next
Please help me!
Thanks in advance
Luke44 said:
Hey guys,
The GT-N7100 of my friend does not boot.It is stuck at the first screen ( Black screen with samsung galaxy note II gt-n7100).
He tried to install a custom rom and installed a Custom Recovery. In Custom Recovery the cache partition couldnt be load. So I cant wipe or format anything. If I want to install a zip, the Recovery just get stuck before even selecting a zip file.
I can access download mode. So I tried to flash another recovery. Odin says successful but the recovery is still the same ????
I also tried to flash a stock rom with Odin... nothing changed
So I dont know what to do next
Please help me!
Thanks in advance
Click to expand...
Click to collapse
well flash philz recovery via odin
untick "autoreboot" in odin. Once flash is done, keep pressing power button until it reboots (normally will go to recovery)
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm
now proceed with wipe and after flashing rom ,fix permission and wipe cache and dalvic cache twice then reboot
shhbz said:
well flash philz recovery via odin
untick "autoreboot" in odin. Once flash is done, keep pressing power button until it reboots (normally will go to recovery)
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm
now proceed with wipe and after flashing rom ,fix permission and wipe cache and dalvic cache twice then reboot
Click to expand...
Click to collapse
I flashed philz recovery. After pressing the power button just the battery symbol appeared... no reboot. So I treid to boot into the new recovery... but still the old recovery boots
Heres the log from Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.11.2-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
http://forum.xda-developers.com/showpost.php?p=32273406
I wanted to try this, but this download contains just one file. Even if I extract the tar, there are not the files included which are discribed in the thread...
quite strange....
I simply cant flash anything with Odin. Odin says success, but nothing happened to the phone. I didnt read something about people who are having the same issue
This drives me mad .....
Luke44 said:
http://forum.xda-developers.com/showpost.php?p=32273406
I wanted to try this, but this download contains just one file. Even if I extract the tar, there are not the files included which are discribed in the thread...
quite strange....
I simply cant flash anything with Odin. Odin says success, but nothing happened to the phone. I didnt read something about people who are having the same issue
This drives me mad .....
Click to expand...
Click to collapse
well its not sds for sure so it seems either recovery has gone corrupted as,the pit file u said is not required though u can find it here to http://forum.xda-developers.com/showthread.php?t=1896696 post 4 no4 pit file16gb
but i would suggest you to try the recovery thing as mentioned in the link as see as the one i mentioned is used when it does not enter recovery try this version http://d-h.st/vCc
keep the power button pressed it should enter recovery leave the power button when u see samsung logo
I did it long time back so dont remember exactly whether to keep pressing power button or to hold power button worked for me as auto reboot was not working for me so did the other way round as mentioned to you
shhbz said:
well its not sds for sure so it seems either recovery has gone corrupted as,the pit file u said is not required though u can find it here to http://forum.xda-developers.com/showthread.php?t=1896696 post 4 no4 pit file16gb
but i would suggest you to try the recovery thing as mentioned in the link as see as the one i mentioned is used when it does not enter recovery try this version http://d-h.st/vCc
keep the power button pressed it should enter recovery leave the power button when u see samsung logo
I did it long time back so dont remember exactly whether to keep pressing power button or to hold power button worked for me as auto reboot was not working for me so did the other way round as mentioned to you
Click to expand...
Click to collapse
Im glad to hear that it is not sds.
I tried to flash the recovery of your link:
If I leave the phone connected if I press the power button after flashing just the battery symbol apears after a while.
If I disconnect the phone, it tries to boot normal...no recovery...
If I tap on the power button again and again nothing happens.....
If I try to boot into recovery with the 3 button combo there is still the old clockwork recovery.
I also tried to do a emergency recovery with kies. Kies does download all the files and when it starts to flash it gets stuck at 0 % and sais phone is not connected in the right way but it is...
In Odin mode the phone displays
custom binary downloads : Yes ( 1 counts)
But did flash the recovery at least 3 times ...So why does it still display 1
Luke44 said:
Im glad to hear that it is not sds.
I tried to flash the recovery of your link:
If I leave the phone connected if I press the power button after flashing just the battery symbol apears after a while.
If I disconnect the phone, it tries to boot normal...no recovery...
If I tap on the power button again and again nothing happens.....
If I try to boot into recovery with the 3 button combo there is still the old clockwork recovery.
I also tried to do a emergency recovery with kies. Kies does download all the files and when it starts to flash it gets stuck at 0 % and sais phone is not connected in the right way but it is...
In Odin mode the phone displays
custom binary downloads : Yes ( 1 counts)
But did flash the recovery at least 3 times ...So why does it still display 1
Click to expand...
Click to collapse
do u have kies installed when u trying odin if yes then delete it just install the samsung drivers nothing else and disable your antivirus too.
orelse u may try
thats quite strange ok now its time to try the mskip tool just delete all old samsung drivers and kies
and start fresh from here http://forum.xda-developers.com/showthread.php?t=1923956
and as far as the count in concerned its 1 as you were only able to enter recovery once thats why after that u were not able to so as many times u enter custom recovery the count increases
http://forum.xda-developers.com/showthread.php?t=1896696
Do you think it makes sense todo re-partition with the pit file?
There is also a Bootloader to download on this site...
Luke44 said:
http://forum.xda-developers.com/showthread.php?t=1896696
Do you think it makes sense todo re-partition with the pit file?
There is also a Bootloader to download on this site...
Click to expand...
Click to collapse
i would say no until there is an error which shows no pit partition found but after the above steps if it does not then u can give it a fresh start flash the pit first then the firmware . check youtube as how to do it there are vidoes described on how to flash pit and then the firmware.
i would suggest not to do something which you are not sure of and land urself in other issues though flashing pit and firmware is fine but i am not sure about the bootloader maybe u can ask in that specific thread , keten might be the best person to guide you in that case if its safe
shhbz said:
i would say no until there is an error which shows no pit partition found but after the above steps if it does not then u can give it a fresh start flash the pit first then the firmware . check youtube as how to do it there are vidoes described on how to flash pit and then the firmware.
i would suggest not to do something which you are not sure of and land urself in other issues though flashing pit and firmware is fine but i am not sure about the bootloader maybe u can ask in that specific thread , keten might be the best person to guide you in that case if its safe
Click to expand...
Click to collapse
Sorry but I cant find such a viedo...
Luke44 said:
Sorry but I cant find such a viedo...
Click to expand...
Click to collapse
I tried to flsh this, but odin says:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
What exact information you can see on Download Mode Rt Upper corner.
post full details here
dr.ketan said:
What exact information you can see on Download Mode Rt Upper corner.
post full details here
Click to expand...
Click to collapse
In the right upper corner is nothing...
In the left upper corner:
ODIN MODE (written in red)
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Try different USB port, don't use any extension cable to connect device.
close firewall and still issue try different cable and PC
Download PIT
select it for PIT tab (It will auto select re-partition, keep it selected) - Flash
Also confirm Kies is not running in BG
Luke44 said:
Sorry but I cant find such a viedo...
Click to expand...
Click to collapse
There is I am on phn so would be difficult for me to find but its simple u just select the pit file first in odin and flash keeping ur phn in download mode and then the firmware tar file
Try different USB port, don't use any extension cable to connect device.
close firewall and still issue try different cable and PC
Download PIT
select it for PIT tab (It will auto select re-partition, keep it selected) - Flash
Also confirm Kies is not running in BG
Click to expand...
Click to collapse
I tried a different computer with different cable. On the computer I used this time there is not even kies installed.
Same result as before...
dr.ketan said:
Try different USB port, don't use any extension cable to connect device.
close firewall and still issue try different cable and PC
Download PIT
select it for PIT tab (It will auto select re-partition, keep it selected) - Flash
Also confirm Kies is not running in BG
Click to expand...
Click to collapse
I tried it a few more times..it really doesnt work
Whats wrong with this !"§$%& phone:crying::crying::crying:
I have note II hang on logo, i try to flash without pit its says no pit, so i add pit wit repartition checked, repartition failed.
i tried to reset but cant get in to reset screen, i can get into download mode only
in odin mode
Product name :
custom binary Download : NO
current binary : Samsung official
Stystem Status : custom
I search forum whole day but no luck, any1 can help here plzzz
(i hope i posted in right section because this is my 1st time here)
Hello all,
So I recently updated my Note 10+ and while the OS will load and I can unlock my device, it reboots about 30 seconds after the OS loads. There is a notification showing that it is finishing up with the update each time the phone restarts. This will repeat over and over again and I really would like to avoid losing all of my data (both my internal and SD memory is encrypted). I've tried leaving the phone for a bit to see if it would stop, turning off bluetooth, wifi and location and plugging my phone into the charger. Nothing seems to work.
Full disclosure, about 6 months ago I followed a bloatware removal thread on these forums and uninstalled a handful of apps. I was careful to avoid any that I thought might cause issues and I've done OTA updates since then without issues but I figured I would mention it in case that's part of the issue.
Model: Note 10+ (SM-N975W)
Carrier: Telus (TLS)
Bootloader: Locked
Update: OTA via carrier
Appempting To Update Firmware Via ADB
1. I downloaded firmware matching my model and carrier from both Sammobile and using Frija as well as the ADB Platform Tools via Google.
2. After using apply update from ADB via Samsung recovery and trying the firmware files from the above sources my ADB progress never shows above 0% and my Note shows Verifying update package indefinitely.
3. Disconnecting my Note shows the following errors via recovery;
E:Failed to read 6 bytes data at offset 5983263248: I/O error
E:Failed to read footer
Update package verification took 90.3 s (result 1).
E:Signature verification failed
E:error:21
Install from ADB completed with status 2.
Installation aborted.
Attempting To Update Firmware Via Odin
1. I downloaded the 2 most recent version of Odin from XDA and chose Reboot to bootloader from the Samsung recovery menu
2. Opened Odin with admin privileges and loaded the BL, AP, CP and CSC (CSC_HOME) files. All MD5 checks done.
3. Hit Start and 2 seconds later I had Odin showing PASS! as well as the following;
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
4. Phone reboots and problem continues.
Any help you guys can offer would be appreciated. Let me know what other info you need from me.
A quick update. I attempted to put the previous firmware onto the phone via Odin and soft bricked it. It failed to boot and gave me the option to wipe the device or try again. I managed to get it back into download mode and used Odin to flash the latest firmware onto it and it boots into the OS now but the bootloop still occurs.
Edit: tried to restart the phone in safe mode but it hangs on the Samsung logo for a minute and then reboots and loads the full OS instead.
Try Smart Switch for PC, emergency recovery as I remember. Based on SN# maybe it'll be able to flash the latest firmware for it.
Turn phone off. Take out SD card. Hold side key (side key must be set to power off mode)and volume up key in at the same time until you see Samsung logo. From here you should be able to flash what you need to.
Hi,
Phone; SM-AF520F
My phone has been restarting on its own from the past month and I ignored it. It showed me occasionally Google services failed or system UI is not responding.
I factory resetted the phone as any noob would do and the restart occurrence went to only at night, which I was unbothered with. A little time passed and the phone went to the downloading sky blue screen.
I'm aware with flashing roms and stuff but I never really tried it. I tried everything;
i) Used Odin, three different versions
ii) Used Stock firmware, three different versions
iii) Used Smart switch
The phone only went in download phase and than in the phase where you press home button, volume and power and it shows fonts in the left hand corner. Odin always giving me errors, sometimes stucking on setting up connection.
Two errors:
i) There is no PIT partition
ii) Write operation failed
There are always these things happening.
When I restarted with volume down and power key, the system showed, there was an error and try smart switch, updated my drivers but when I go in the settings to emergency recover my phone, it does not show my phone.
After restarting the phone couple of time, Im in downloading mode again, in between the screen also turns full sky blue with no text.
I tried installing custom recovery but the image didn't load, ( I dont know what i am doing at this point, even if this was a good idea).
I have scavanged every forum, every post, everything on the internet but I just can't seem to fix it, I tried every possible thing and it just dosent work. I know it can be fixed but I don't know how. I know I'm doing something stupidly wrong but I can't seem to figure it out.
This is an old phone, I'm going to buy another one soon but I just hope it works for another week? Can I wipe the whole system and start from scratch (Which i dont know how to do).
Any type of help would be greatly appreciated, or just tell me to give up hope on it so I can just throw it away and move on.
1-Install 7zip application in windows
Then using 7zip, try to open file (in stock ROM files) -⇾ "CSC_ODD_***"
2-There is your phone pit file for a520f.
Extract that file and keep it between your stock Rom files.
3-Download the Odin from this link and open it:
https://dl2018.sammobile.com/Odin3-v3.14.4.zip
4-Go to download mode (blue screen) in your phone!
Add 4 part of your ROM to Odin.
Then in pit tab of Odin add your phone pit file!
5-In option tab of Odin toggle Re-Partition option.
6-click on start and wait until it shows a green icon and phone restarting!
It must be fixed!
matkali said:
1-Install 7zip application in windows
Then using 7zip, try to open file (in stock ROM files) -⇾ "CSC_ODD_***"
2-There is your phone pit file for a520f.
Extract that file and keep it between your stock Rom files.
3-Download the Odin from this link and open it:
https://dl2018.sammobile.com/Odin3-v3.14.4.zip
4-Go to download mode (blue screen) in your phone!
Add 4 part of your ROM to Odin.
Then in pit tab of Odin add your phone pit file!
5-In option tab of Odin toggle Re-Partition option.
6-click on start and wait until it shows a green icon and phone restarting!
It must be fixed!
Click to expand...
Click to collapse
Thank you for your response.
I did what you exactly said, previously it failed at the instant, now it moved one tab and than failed.
I tried the provided Odin, than tried two roms with, with the pit filed extracted and enabled re partition.
The error occurred: Complete(write) operation failed.
The error occurred every time I tried to flash, it never worked.
Do you think there is anything else to do?
Try this way to go download mode:
Press vol-down + power until phone restart
Then instantly press vol-up + Home + Power to going to download mode!
If it not works for you! You can use (eMMC programmer or easy JTAG) to writing rom on your phone memory (Last Option)!
I gave up on it and asked for professional help. Idk what he did, but he fixed the phone. It was sluggish at first but it works like a charm now.
It took 7 minutes to turn it on, than It said, there was an authorized user who tried to access your phone, use your previous email password to access your phone. I put it on my previous details and the works okay after some updates.
I wonder what he did? And i never knew android has a feature where if somone tries to reset your phone, google account locks it? Wow.
Is flashing a custom os a good idea? I'm afraid I'll brick it or something or just keep running one ui and wait for it to die again.
Thank you for your help btw, made me learn alot.
matkali said:
1-Install 7zip application in windows
Then using 7zip, try to open file (in stock ROM files) -⇾ "CSC_ODD_***"
2-There is your phone pit file for a520f.
Extract that file and keep it between your stock Rom files.
3-Download the Odin from this link and open it:
https://dl2018.sammobile.com/Odin3-v3.14.4.zip
4-Go to download mode (blue screen) in your phone!
Add 4 part of your ROM to Odin.
Then in pit tab of Odin add your phone pit file!
5-In option tab of Odin toggle Re-Partition option.
6-click on start and wait until it shows a green icon and phone restarting!
It must be fixed!
Click to expand...
Click to collapse
im having the exact same problem this guy has, installing a pit file will erase my data? if i use HOME_CSC will the pictures stay? i only care about the photos.