I have note II hang on logo, i try to flash without pit its says no pit, so i add pit wit repartition checked, repartition failed.
i tried to reset but cant get in to reset screen, i can get into download mode only
in odin mode
Product name :
custom binary Download : NO
current binary : Samsung official
Stystem Status : custom
I search forum whole day but no luck, any1 can help here plzzz
(i hope i posted in right section because this is my 1st time here)
Related
I recently purchase a korean note 2 lte, and I try to flash a custom rom via odin and I must have ticked nand erase by accident , now when I try to flash a stock rom it keep asking me for a pit. I have been searching for a pit file over a week but no luck, can someone help? now tje phone can only go in to download mode and nothing else.(sorry my english is not that good)
anyone help?
please any help would be greatly appreciated
As much as Kies is hated, an emergency recovery using it will fix this problem.
I tried using kies but it won't even connect. thanks for the help.
Kies didn't connect for me when I had this problem, either. Going to the emergency recovery option worked fine.
sal
Hello, i have a E250L 32G, power only in download mode, need to be repartition. I need a pit file from the same device.
Maybe an E250L user can manage to read this pit file from a good phone, in adb mode or hemidal.
Any help will be apreciated....thanks
.
Plss i am disperate, i need badly pit file partition for SHV-E250L 32G note 2 [email protected]. thx.
.
With this software you can extract PIT a functional phone
http://forum.xda-developers.com/showthread.php?t=1308546
.
PRODUCT NAME: SHV-E250L
CUSTOM BINARY DOWNLOAD: Yes (23 counts)
SYSTEM STATUS: Custom
I gave the command delete the partitions inside the adb shell. it shows me now download mode, connect to Odin's drivers. I ask for flash pit file.
.
Hi,
Writing this to seek you help! My second phone, Galaxy grand duos (i9082). Suddenlty went dead and now struck on boot logo. I have tried flashing Cm/Stock roms through both recovery and Odin. But I am getting this error message
===
E: Can’t mount Cache/recovery
Or
E:failed to mount/cache (no such file or directory)
===
Can you please suggest is there anything I can try to revive the phone?
Ps: The stock rom files I have downloaded are having only one zip file than three to place in PDA/CSC/PHONE tabs of ODIN. As PIT file is not available separately, I am not able to try re-partion. With my limited knowledge, the problem is more on account of readability of drives/memory. Please suggest if I should try to download the stock firm ware again from different source to get PIT file and try again>
Thanks in advance for your help!!
You'll need to flash Stock firmware.
1. On your Computer, in Task Manager, kill all Kies related processes.
2. Open ODIN and put that single TAR file in PDA section. Others will be blank.
3. Make sure that Re-partition is NOT TICKED. A mistake here could make your device dead.
4. Flash
You should be good to go :good:
General rule :
a) if Firmware has only 1 file (it will be either tar or tar.md5) it will go in PDA. Others blank.
b) NEVER tick Re-partition option if you don't have pit file. Generally it is not required.
Let me say (for first time ever ) I AM TRYING TO HELP YOU BUT WON'T BE RESPONSIBLE FOR ANY DAMAGE YOU DO TO YOUR DEVICE.
Good luck :good::laugh:
Hello Guys .. My mobile was stuck at "Galaxy Note II bootloop" and cant get access to recovery screen ,, just download mode for flash any rom ,, but when I flash a rom it shows me this msg"complete write operation failed" in Odin and I cannot setup the ROM .. So please whats the solution as I changed the cable , closed kies and changed pc but still the problem
Publish the Odin log so we can see where the flash process stops and any error messages.
My sister's S4 mini suddenly died, I cannot open the smartphone nor go on Recovery or download mode.
I used a debrick.img found here on xda put on a externaSD and manage to enter the download mode, then i try to flash a stock rom but it got stuck during the process (i leave odin running for hours without any success).
After that, when i retry the process this is what i got on screen:
Code:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
WRITE 139008 sectors. .
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
BOOTLOADER AP SWREV: 2
CSB-CONFIG-SLB: 0x30
WRITE PROTECTION: ENABLE
I try to flash different .pit file found here on xda for the i9195 but if i try to flash (using Odin 3.13 or even odin 1.85) it says
Re-Partition operation failed or There is no PIT partition.
Any other idea i can try?
Maybe another .pit file for i9195 and a firmware that work with it?
Thanks to everyone
Goku_ssj3 said:
My sister's S4 mini suddenly died, I cannot open the smartphone nor go on Recovery or download mode.
I used a debrick.img found here on xda put on a externaSD and manage to enter the download mode, then i try to flash a stock rom but it got stuck during the process (i leave odin running for hours without any success).
After that, when i retry the process this is what i got on screen:
I try to flash different .pit file found here on xda for the i9195 but if i try to flash (using Odin 3.13 or even odin 1.85) it says
Re-Partition operation failed or There is no PIT partition.
Any other idea i can try?
Maybe another .pit file for i9195 and a firmware that work with it?
Thanks to everyone
Click to expand...
Click to collapse
I think her EMMc chip is probably dead, so needs replacing (new motherboard)
Hello,
Because I am an idiot I forgot to turn off the FRP lock on my device before flashing with ODIN and ended up with a brick.
After searching for some time, I found the solution to this problem and I will share it with you so you don't have to search again.
The phone will be stuck in a blue screen so use FRP hijacker to get out of the "an error occured" screen ( link:
) and reboot to Download screen.
Download the appropriate software with the correct binary for your device and unzip it.
Extract the PIT file from the CSC file unzipped above, and use it with ODIN in the PIT tab ( https://www.droidviews.com/extract-samsung-pit-file-from-firmware/ )
Flash the device as you would normally do.
Many thanks to [email protected] for the answer from his thread ( https://forum.xda-developers.com/t/...tra-super-image-needed.4156935/#post-83408361 )