hi guys,
This is my first thread so please dont mind my mistakes
im here just try to provide possible answers to them , who were looking for "Security Fail" error while flashing Bada firmware over wave 1 2 or 3,
i hve able to recover my wave 1 from security fail error, and successfully flashed my wave1,
if you have security fail errors, try latest Multiloader v5.67 , (dont try older versions)
download Multiloader v5.67 from here http://www.mediafire.com/?s59s0xq99uj5bq7
after connecting phone with PC via USB in Download mode , check LIS checkbox,
if you want to flash boot file, check Boot Change(only boot change no other checkboxes) and load boot files from your downloaded firmware folder, after selecting boot files press download, wait for massage 'wait for reset', your phone will try to reboot but it will stuck at bada logo, dont worry, pull your battery, make your phone again in download mode , press PORT Search ,now uncheck all check boxes except LIS, (do not select Full Download , Master Rom or Diffrances only) now select Amss, Rsrc, Rsrc2(low), facotryFs, apps compressed, CSC, ShpApp, and fota file from downloaded Firmware folder to their respective fields, and press Download, wait untill massage "All files completed". your phone will boot if not try battery pull and again boot your phone, once booted do factory reset using this code *2767*3855#,
thats it
i have sucessfully recovered my wave 1 from security fail error and updated bada 2.0 XXLC2 using above method
hope it help others also,
please forgive me for my english
Take care
I tried flashing all the files but the phone is now stuck in the samsung loading screen. Please help
I have note II hang on logo, i try to flash without pit its says no pit, so i add pit wit repartition checked, repartition failed.
i tried to reset but cant get in to reset screen, i can get into download mode only
in odin mode
Product name :
custom binary Download : NO
current binary : Samsung official
Stystem Status : custom
I search forum whole day but no luck, any1 can help here plzzz
(i hope i posted in right section because this is my 1st time here)
Yesterday my phone suddenly got on boot loop so I decided to flash stock rom but then it failed halfway.
Now whenever I try to on my phone it shows ''Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again'' and when i try to flash stock rom it says ''no pit partition'' when i got my hand on pit file it says ''repartition operation failed'' after ''set pit file''
N7105
bump
HI
I have a Samsung galaxy tab 3 lite SM-T111 and the tab had a problem about /efs invalid argument.
i was tried to fixed it already by install twrp recovery and the efs is worked but after i flashed back to stock firmware THL-T111XXUANB2 after pass on odin it suddenly showed
E: /system invalid
/cache invaild argument
then switch off automatically.
Now my device is stuck on factory mode only and even i tried to firmware restore by odin it shows nand write start failed. I tried to restored with pit file also it let pit file pass but when it started to flash firmware it failed on nand write start!
it that anyway to fix it guys?? May be my pit file is wrong or something happening. So pls let me know guide way to fix it. I hope that wont be emmc chip error.
Thanks you guys.
no one want to help..
help samsung sm t111 flash failed
kohtoo said:
no one want to help..
Click to expand...
Click to collapse
help me
kohtoo said:
HI
I have a Samsung galaxy tab 3 lite SM-T111 and the tab had a problem about /efs invalid argument.
i was tried to fixed it already by install twrp recovery and the efs is worked but after i flashed back to stock firmware THL-T111XXUANB2 after pass on odin it suddenly showed
E: /system invalid
/cache invaild argument
then switch off automatically.
Now my device is stuck on factory mode only and even i tried to firmware restore by odin it shows nand write start failed. I tried to restored with pit file also it let pit file pass but when it started to flash firmware it failed on nand write start!
it that anyway to fix it guys?? May be my pit file is wrong or something happening. So pls let me know guide way to fix it. I hope that wont be emmc chip error.
Thanks you guys.
Click to expand...
Click to collapse
U are using tab 3 neo SM-T111 if are using any rom in this tab so plzz help me I also want to flash a ROM in my tab I am also using tab 3 s
Smt111
Use Odin v3.07 and check Nand Erase All
Hello dear friends.Here is the problem
I own a N7100 and the mother board was broken.So i got a new one from china.They say it is original and when i check it visually i think that it is original.(i am not sure).It had been working normal by original 4.1 rom.It had cwm recovery.And i wanted to flash a custom rom and it rocommends to use TWRP.So i tried to flash it.But it seemed that i could not install it.It showed CWM when i try to enter recovery mode.After 2-3 attempt it started to stuck on SAMSUNG N7100 screen.Now i neither can enter recovery mode nor to the rom.It loops on samsung screen.The only thing works is download mode.On download mode screen
Product name : GT-N7100
And it says " RPMB: INVALID RPMB DATA"
I can not flash a rom via odin.it always give an error.What can i do to fix it?Is it a hardware problem?can you please explain the ways of fixing it?
Thank you.when i try to flash by heimdall on linux it says
Heimdall v1.4.1
ERROR: Failed to send end session packet!
Releasing device interface...