Develop Bugs

Where to download the original rom?

Where can I find & download the latest original ROM of the S3 T999 ( T-mobile). Thanks.

re: stock rom.
vietthanh1206 said:
Where can I find & download the latest original ROM of the S3 T999 ( T-mobile). Thanks.
Click to expand...
Click to collapse
Here is the latest original T999 S3 Touchwiz Jellybean 4.1.1 rom.
This is the stock Odin flash rom. http://www.androidfilehost.com/?fid=22940013536739731
You will need ODIN to flash it. http://d-h.st/Q14
It will not flash using CWM or TWRP
Good luck!

Misterjunky said:
Here is the latest original T999 S3 Touchwiz Jellybean 4.1.1 rom.
This is the stock Odin flash rom.
http://www.androidfilehost.com/?fid=22940013536739731
Good luck!
Click to expand...
Click to collapse
Do you have instruction for flashing it? or just flash like a normal custom ROM ?

re: instructions
vietthanh1206 said:
Do you have instruction for flashing it? or just flash like a normal custom ROM ?
Click to expand...
Click to collapse
Here is the step by step guide:
NOTE: you cannot flash it the same way as you would flash a custom rom.
After downloading it make a folder on your desktop and unzip the file
using Winzip or 7zip so the .TAR file is in the new folder you just made.
Here is a link for ODIN which is required for flashing the stock rooted firmware (a windows app) http://d-h.st/Q14
Download and extract Odin into the same folder you made containing the TAR file.
Download the the stock T999 rom and extract the TAR file into a new folder on your desktop of the computer.
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!

vietthanh1206 said:
Where can I find & download the latest original ROM of the S3 T999 ( T-mobile). Thanks.
Click to expand...
Click to collapse
vietthanh1206 said:
Do you have instruction for flashing it? or just flash like a normal custom ROM ?
Click to expand...
Click to collapse
From your two posts I'm going to guess that you are rooted and have a custom recovery installed.
Here is the latest stock rooted 4.1.1 jellybean ROM for the T-Mobile Galaxy S3.
Just flash this rom as you would any other ROM.
http://forum.xda-developers.com/showthread.php?t=2128306
Sent from my SGH-T999 using xda premium

Misterjunky said:
Here is the step by step guide:
NOTE: you cannot flash it the same way as you would flash a custom rom.
After downloading it make a folder on your desktop and unzip the file
using Winzip or 7zip so the .TAR file is in the new folder you just made.
Here is a link for ODIN which is required for flashing the stock rooted firmware (a windows app) http://d-h.st/Q14
Download and extract Odin into the same folder you made containing the TAR file.
Download the the stock T999 rom and extract the TAR file into a new folder on your desktop of the computer.
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
Click to expand...
Click to collapse
Hey man I downloaded your firmware but I can't extract it. Do you have anyother link or other built of it ?

re: zip file
vietthanh1206 said:
Hey man I downloaded your firmware but I can't extract it. Do you have anyother link or other built of it ?
Click to expand...
Click to collapse
Do a google search for 7zip it's a free utility for windows,
Download and install it so you will be able extract the TAR
file inside the zip.

SD card not mounting

Im running clockwork 6.0.3.1 and tried to install the latest CM 10 build. I did all the wipes and all. But im getting an error cant mount external_sd. I just rooted my phone yesterday and everything went fine. I did a backup of my stock rom also but since the sd card will not mount I cant do a restore either. Please help. Do I need to unlock the bootloader? I just rooted using Odin.

re: solved
dpshptl said:
Im running clockwork 6.0.3.1 and tried to install the latest CM 10 build. I did all the wipes and all. But im getting an error cant mount external_sd. I just rooted my phone yesterday and everything went fine. I did a backup of my stock rom also but since the sd card will not mount I cant do a restore either. Please help. Do I need to unlock the bootloader? I just rooted using Odin.
Click to expand...
Click to collapse
First thing to try is to boot into cwm and do a factory reset and reboot the phone that should fix the ex sdcard issue.
If that don't work the only other thing to do is to do an ODIN flash TAR file of the stock-pre-rooted 4.1.2 T999
Tmobile Jellybean rom and from there using rom manager you will be able to restore your backup
or flash any other cwm flashable zipfile.
good luck!

Anyone have a link to the TAR file of the stock-pre-rooted 4.1.2 T999?

re: download link
dpshptl said:
Anyone have a link to the TAR file of the stock-pre-rooted 4.1.2 T999?
Click to expand...
Click to collapse
Here is the download link for it.
T999_UVDMD5
good luck!

mister, since you are so helpfull. I need some more help with Odin. Do i select PDA in Odin and only have F. reset checked? I used Odin to root but not to restore.

re: odin
dpshptl said:
mister, since you are so helpfull. I need some more help with Odin. Do i select PDA in Odin and only have F. reset checked? I used Odin to root but not to restore.
Click to expand...
Click to collapse
YES PDA but unzip the rooted rom first, copy it into an empty folder and copy odin into the same folder.
Best thing to do is to close odin and open it again to be sure that it's in default settings mode.
Only use the PDA option to get the tar file into it.
Do not change any of the settings in odin, leave it default and be sure that the [COM:XX] lights up
after you get the phone into download mode and plug in the usb cable to the computer and your phone.
Once it lights up then start the flash. Have patience after it's done it will take it 5-10 minutes to fully reboot after the flash.
This guide will get your phone back up and running properly
Easy and sure way fix your problem - Here is s step by step guide:
Download the newest pre-rooted Samsung Galaxy S3 T999 Jellybean v4.1.2 rom: T999_UVDMD5
After downloading make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download and extract Odin into the same folder you made containing the TAR file
Here is the link for Odin: http://d-h.st/Q14
Download ODIN which is required for flashing the stock rooted firmware (a windows app)
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!

[ROOT] SGH-I467 ATT Note 8

Hello, I can not post on the developer forums yet, so I will post what I can here.
I was able to get root access to my Samsung ATT Note 8 (SGH-i467). See attached image.
Thank you;
lyriquidperfection: for the packing tools. http://forum.xda-developers.com/show....php?t=2411243
globula_neagra: for the comments on system.img. http://forum.xda-developers.com/show....php?t=1971249
SkipKelley: for starting me off. http://forum.xda-developers.com/show....php?t=2385265
The XDA Forums: for being available.
chainfire: for obvious reasons. http://www.chainfire.eu/
I will try to put together a complete how to when I can. For now I will link to the image files I created.
DO THIS AT YOUR OWN RISK! I DO NOT TAKE ANY RESPONSIBILITY FOR YOUR DEVICE NOT WORKING.
Here we go.
1. Download the i467 firmware from http://www.sammobile.com
1a. Extract the main zip file you downloaded. Leave the .tar.md5 files intact. They are the files you select with Odin in steps six (6) and nine (9).
2. Download Odin 3.07 from http://forum.xda-developers.com/show....php?t=1738841
2a. Extract and launch Odin.
3. Download the pre-rooted I467UCAMF1 images from SAMSUNG-SGH-I467I467UCAMF1-ROOT.tar
3a. Do not extract or modify this file.
4. Do a factory reset of the device either in system settings or using recovery (volume up). Yes, I have found you must do this.
5. Boot into download mode. (Home + Volume Down + Power)
Step 6 is only required if you accepted the OTA "CAMF2".
6. Use Odin to flash all four files downloaded in step 1. BOOTLOADER, CODE, MODEM and CSC files.
6a. Let the device finish install and boot.
6b. Boot into download mode. (Home + Volume Down + Power)
This is the fun part.
7. Select PDA in Odin and select the file downloaded in step 3. Make sure all other files are not checked. Flash... Odin will say it failed. Yes, don't worry, recovery is still there.
8. Reboot into download mode (Home + Volume Down + Power)
9. Using Odin only flash the BOOTLOADER, MODEM, and CSC from step 1. Do not flash the CODE file or the modified image. In other words, leave PDA unchecked in Odin.
10. Let the device install and reboot.
You should now be able to run SuperSU.
If you want to update to OTA CAMF2 then follow these steps BEFORE DOING ANYTHING ELSE;
Thanks to DanMc85 and others for testing. Also, usernamenotfound wrote instructions in the next post, thank you.
1. Start SuperSU and in the settings enable Survival mode.
2. Connect to a Wifi network. (Thanks aTt)
3. Go to system Settings and select About Device at the bottom of the list.
4. Select Software update on the right.
5. Go through the update process and the device will reboot. You should be at version CAMF2.
[EDIT]
Bootloader = BOOTLOADER...tar.md5
PDA = CODE...tar.md5 - Don't select this in step nine (9). Leave blank.
PHONE = MODEM...tar.md5
CSC = CSC...tar.md5

Thank you ZeroxCorbin, this method works flawlessly!
Thanks to DanMc85, crazymikey, & Danno5150 for the following:
If you are looking to update to MF2 after you root, make sure that you enable Survival Mode within SuperSU Pro and then perform the update BEFORE you remove any bloatware or make any changes to the file system, as changes in the system will cause the update to fail.
Remember to do a backup of any apks before removal as this will allow you to put them back in place in preparation for future updates. (MF3?)
Hope this helps mitigate some of the questions.
Thanks again guys!

usernamenotfound said:
usernamenotfound
Click to expand...
Click to collapse
I think we posted at the same time. :highfive:
I updated the instruction to include the update to CAMF2. Thanks for testing it out and letting us know.

Step 3 link not working
ZeroxCorbin said:
3. Download the pre-rooted I467UCAMF1 images from SAMSUNG-SGH-I467I467UCAMF1-ROOT.tar
3a. Do not extract or modify this file.
Click to expand...
Click to collapse
ZC, thanks for this. This is great and I appreciate it. Also, the link in step three for the download wasn't a link for me, so I'm attaching here.
http://www.42nexus.com/i467/SAMSUNG...467I467UCAMF1_SAMSUNG-SGH-I467I467ATTAMF1.tar
Here's the Odin 3.07 link:
http://forum.xda-developers.com/showthread.php?t=1738841
And finally, where the OP lists "Modem" in Odin, I had it as "Phone".
I hope it helps someone.

esoh said:
esoh
Click to expand...
Click to collapse
Thank you, I moved the thread last night. The links must have been removed? They are working again. :good:

Tethering
ZeroxCorbin said:
Thank you, I moved the thread last night. The links must have been removed? They are working again. :good:
Click to expand...
Click to collapse
For anyone trying to tether following root, I used the Wifi Tether instructions at this link and they worked.
http://highonandroid.com/android-ap...android-smartphone-or-tablet-universal-guide/

Thank you very much
Everything went well and I was able to root after 2 months. Took a while, but thank yery much. I've missed Titanium Backup so much.
Instructions were very clear and concise. Was able to root in about 15 minutes with reboots and pushes. Worked perfectly following the instructions to upgrade to MF2
Skip

Thank you this worked perfectly; note I can use the device the way I want to.

Thanks I was worried I was gonna have to take this back! But it worked on secound tty and using Titanium Backup Pro I can fully integrate Root apps and updates into the stock system rom with no trouble! How do you install a TWRP Recovery for this model?
Sent from my SAMSUNG-SGH-I467 using XDA Premium HD app

What will happen if my fone is an unlocked ATT
I am a little worried because I have it unlocked for international 3g sim. If I root it, will i have to unlock again?
Sorry about my dumb question

RootSuperSU said:
Thanks I was worried I was gonna have to take this back! But it worked on secound tty and using Titanium Backup Pro I can fully integrate Root apps and updates into the stock system rom with no trouble! How do you install a TWRP Recovery for this model?
Sent from my SAMSUNG-SGH-I467 using XDA Premium HD app
Click to expand...
Click to collapse
We can't flash any custom recoveries until the bootloader is unlocked
At least we have root.

terra-starr said:
We can't flash any custom recoveries until the bootloader is unlocked
At least we have root.
Click to expand...
Click to collapse
I think that he's talking about SIM unlock maybe? If that's the case, I'm assuming that the way that this root was setup, you will probably need to re-unlock the SIM, but I'm not 100% sure.

So glad we finally have root! Won't do this until a bootloader is figured out though. But this is the first step! I wish I knew more on how to crack bootloaders to help out :/
So I know, does this method work with the OTA Update that AT&T put out in August?

ZeroxCorbin said:
Hello, I can not post on the developer forums yet, so I will post what I can here.
I was able to get root access to my Samsung ATT Note 8 (SGH-i467). See attached image.
Thank you;
lyriquidperfection: for the packing tools. http://forum.xda-developers.com/show....php?t=2411243
globula_neagra: for the comments on system.img. http://forum.xda-developers.com/show....php?t=1971249
SkipKelley: for starting me off. http://forum.xda-developers.com/show....php?t=2385265
The XDA Forums: for being available.
chainfire: for obvious reasons. http://www.chainfire.eu/
I will try to put together a complete how to when I can. For now I will link to the image files I created.
DO THIS AT YOUR OWN RISK! I DO NOT TAKE ANY RESPONSIBILITY FOR YOUR DEVICE NOT WORKING.
Here we go.
1. Download the i467 firmware from http://www.sammobile.com
1a. Extract the main zip file you downloaded. Leave the .tar.md5 files intact. They are the files you select with Odin in steps six (6) and nine (9).
2. Download Odin 3.07 from http://forum.xda-developers.com/show....php?t=1738841
2a. Extract and launch Odin.
3. Download the pre-rooted I467UCAMF1 images from SAMSUNG-SGH-I467I467UCAMF1-ROOT.tar
3a. Do not extract or modify this file.
4. Do a factory reset of the device either in system settings or using recovery (volume up). Yes, I have found you must do this.
5. Boot into download mode. (Home + Volume Down + Power)
Step 6 is only required if you accepted the OTA "CAMF2".
6. Use Odin to flash all four files downloaded in step 1. BOOTLOADER, CODE, MODEM and CSC files.
6a. Let the device finish install and boot.
6b. Boot into download mode. (Home + Volume Down + Power)
This is the fun part.
7. Select PDA in Odin and select the file downloaded in step 3. Make sure all other files are not checked. Flash... Odin will say it failed. Yes, don't worry, recovery is still there.
8. Reboot into download mode (Home + Volume Down + Power)
9. Using Odin only flash the BOOTLOADER, MODEM, and CSC from step 1. Do not flash the CODE file or the modified image. In other words, leave PDA unchecked in Odin.
10. Let the device install and reboot.
You should now be able to run SuperSU.
If you want to update to OTA CAMF2 then follow these steps BEFORE DOING ANYTHING ELSE;
Thanks to DanMc85 and others for testing. Also, usernamenotfound wrote instructions in the next post, thank you.
1. Start SuperSU and in the settings enable Survival mode.
2. Connect to a Wifi network. (Thanks aTt)
3. Go to system Settings and select About Device at the bottom of the list.
4. Select Software update on the right.
5. Go through the update process and the device will reboot. You should be at version CAMF2.
[EDIT]
Bootloader = BOOTLOADER...tar.md5
PDA = CODE...tar.md5 - Don't select this in step nine (9). Leave blank.
PHONE = MODEM...tar.md5
CSC = CSC...tar.md5
Click to expand...
Click to collapse
_____________________________________________
I already have the MF2 build can i still follow this steps?

yahjz said:
_____________________________________________
I already have the MF2 build can i still follow this steps?
Click to expand...
Click to collapse
Step six is just for you.

Only issue I had was forgot how picky Odin is about cables. Used a monoprice one and it Odin wouldn't see it. Used the stock cable and all was good.
Tablet is rooted and am in the process of debloating it.
Thanks very much for this. We all appreciate it.

Happy Note 8
Thanks thanks thanks. It worked like a charm!!! :good: I did have to find a shorter cable - wonder why my 10ft cable didn't work :laugh:

I am unclear on the use of odin
I am unclear on these two parts:
Step 6 is only required if you accepted the OTA "CAMF2".
6. Use Odin to flash all four files downloaded in step 1. BOOTLOADER, CODE, MODEM and CSC files.
6a. Let the device finish install and boot.
6b. Boot into download mode. (Home + Volume Down + Power)
This is the fun part.
7. Select PDA in Odin and select the file downloaded in step 3. Make sure all other files are not checked. Flash... Odin will say it failed. Yes, don't worry, recovery is still there.
8. Reboot into download mode (Home + Volume Down + Power)
9. Using Odin only flash the BOOTLOADER, MODEM, and CSC from step 1. Do not flash the CODE file or the modified image. In other words, leave PDA unchecked in Odin.
I have not used Odin, how do you "flash" these files? It looks like you have to do them one at a time. I am just unclear how to flash the files.
Also, It looks like you are doing them twice if you have the CAMF2 update, which I do, is that the case?
Jim
ZeroxCorbin said:
Hello, I can not post on the developer forums yet, so I will post what I can here.
I was able to get root access to my Samsung ATT Note 8 (SGH-i467). See attached image.
Thank you;
lyriquidperfection: for the packing tools. http://forum.xda-developers.com/show....php?t=2411243
globula_neagra: for the comments on system.img. http://forum.xda-developers.com/show....php?t=1971249
SkipKelley: for starting me off. http://forum.xda-developers.com/show....php?t=2385265
The XDA Forums: for being available.
chainfire: for obvious reasons. http://www.chainfire.eu/
I will try to put together a complete how to when I can. For now I will link to the image files I created.
DO THIS AT YOUR OWN RISK! I DO NOT TAKE ANY RESPONSIBILITY FOR YOUR DEVICE NOT WORKING.
Here we go.
1. Download the i467 firmware from http://www.sammobile.com
1a. Extract the main zip file you downloaded. Leave the .tar.md5 files intact. They are the files you select with Odin in steps six (6) and nine (9).
2. Download Odin 3.07 from http://forum.xda-developers.com/show....php?t=1738841
2a. Extract and launch Odin.
3. Download the pre-rooted I467UCAMF1 images from SAMSUNG-SGH-I467I467UCAMF1-ROOT.tar
3a. Do not extract or modify this file.
4. Do a factory reset of the device either in system settings or using recovery (volume up). Yes, I have found you must do this.
5. Boot into download mode. (Home + Volume Down + Power)
Step 6 is only required if you accepted the OTA "CAMF2".
6. Use Odin to flash all four files downloaded in step 1. BOOTLOADER, CODE, MODEM and CSC files.
6a. Let the device finish install and boot.
6b. Boot into download mode. (Home + Volume Down + Power)
This is the fun part.
7. Select PDA in Odin and select the file downloaded in step 3. Make sure all other files are not checked. Flash... Odin will say it failed. Yes, don't worry, recovery is still there.
8. Reboot into download mode (Home + Volume Down + Power)
9. Using Odin only flash the BOOTLOADER, MODEM, and CSC from step 1. Do not flash the CODE file or the modified image. In other words, leave PDA unchecked in Odin.
10. Let the device install and reboot.
You should now be able to run SuperSU.
If you want to update to OTA CAMF2 then follow these steps BEFORE DOING ANYTHING ELSE;
Thanks to DanMc85 and others for testing. Also, usernamenotfound wrote instructions in the next post, thank you.
1. Start SuperSU and in the settings enable Survival mode.
2. Connect to a Wifi network. (Thanks aTt)
3. Go to system Settings and select About Device at the bottom of the list.
4. Select Software update on the right.
5. Go through the update process and the device will reboot. You should be at version CAMF2.
[EDIT]
Bootloader = BOOTLOADER...tar.md5
PDA = CODE...tar.md5 - Don't select this in step nine (9). Leave blank.
PHONE = MODEM...tar.md5
CSC = CSC...tar.md5
Click to expand...
Click to collapse

I downloaded the factory firmware from sammobile (took over 2 hours)
but I think the csc file is corrupt. odin gives an error when I try to select it, and windows shows that the last modified date for the file is year 3247
I downloaded the zip again from sammobile and it's still the same.
Could anyone upload the csc file somewhere like dropbox??
Thanks
EDIT: When I tried to select the csc file I was getting the error "parameter is incorrect". Googling the error shows people saying to remove the ".md5" extension and retry.
When I did, it accepted it (although I didn't flash it yet). But I just wanted to make sure that I am not bypassing the checksum and flashing a corrupt file. Is that what you guys had to do as well, assuming it is still the same factory firmware on sammobile?
Thanks

Can i use that to repair my bricked Note ?

complete galaxy y rooting, odin and stock guide

Hi, guys i just thought that when we mess up our galaxy y then we have to search again and again, separately for root file, stock firmware and odin so i bring to you a complete file that contains the stock firmware, the root file, and odin also. it is a rar file and none of the components have been created by me.
Credits:
stock firmware: doky
odin: google
root file: i don't remember sorry
guide for new ones:
stock firmware recovery:
1)get ur mobile to download mode or odin mode by shutting down and then pressing vol down + power button + home button. then press vol up when the warning comes ( don't worry nothing will happen )
2)connect mobile to pc and open odin. make sure u have mobile drivers. get them by installing kies.
3) click on pda and choose the file pda_s5360_dxlc1. now on csc and choose the file csc_s5360_dxlc1. now on phone and choose modem_s5360_dxlc1.
4) check auto reboot and f.reset time but make sure to uncheck all others. click start. if pass comes written on one of the upper boxes then it's done.
root guide:
1)shut down mobile.
2)get to recovery by pressing vol up + power button + home button.
3) choose install from sd card and choose direct root file.
4) it is done
5)reboot
get it here: here

just to let you know its not a good idea for people from europe to flash that stock firmware - its Indonesia, Malaysia, Philippines, Singapore, Vietnam firmware
its also out dated
you also dont need kies to instal the drivers - there is a usb drivers file from samsung which is much smaller so unless you actually use kies there is no need for it
later firmware and firmware for other countries can be found
http://forum.xda-developers.com/showthread.php?p=48462297#post48462297

I ThinK
xday123 said:
Hi, guys i just thought that when we mess up our galaxy y then we have to search again and again, separately for root file, stock firmware and odin so i bring to you a complete file that contains the stock firmware, the root file, and odin also. it is a rar file and none of the components have been created by me.
Credits:
stock firmware: doky
odin: google
root file: i don't remember sorry
guide for new ones:
stock firmware recovery:
1)get ur mobile to download mode or odin mode by shutting down and then pressing vol down power button home button. then press vol up when the warning comes ( don't worry nothing will happen )
2)connect mobile to pc and open odin. make sure u have mobile drivers. get them by installing kies.
3) click on pda and choose the file pda_s5360_dxlc1. now on csc and choose the file csc_s5360_dxlc1. now on phone and choose modem_s5360_dxlc1.
4) check auto reboot and f.reset time but make sure to uncheck all others. click start. if pass comes written on one of the upper boxes then it's done.
root guide:
1)shut down mobile.
2)get to recovery by pressing vol up power button home button.
3) choose install from sd card and choose direct root file.
4) it is done
5)reboot
get it here: here
Click to expand...
Click to collapse
Well You Should GaVe The Original 2.3.6 For Every Country
It They Install ThiS Via odin in other countrt They Wont Be Able To Regain Back Warranty.
Well I also Think ThaT There Are Many Threat About This Topic Already.

Thanks
sent from terminal emulator

Note 4 PIT Files For Repartiton [F/C/T/W8]

I see a lot of users with partition problems like read and write errors and a lot more
People who need to re partition their note 4 can do so now
so i have decided to post the PIT files in my possession so everyone can have a smoother note 4 experience
Steps to flash PIT files in Odin (Have latest ODIN)
1. Boot the Galaxy Note 4 into download mode screen then connect to PC.
2. This time load the N910F/C/T/W8.pit Pit file on Odin’s PIT Button (Select pit file of your variant) (SPECIAL INSTRUCTIONS FOR C Variant SEE POST 2)
3. Load your original stock firmware on the Odin’s AP button.
4 Make sure repartiton is automatically checked in options
5. Click on “Start” to flash the stock firmware and PIT file then wait.
After the process is over
Turn off the phone and set it into recovery mode
– Press volume “volume up, home and power buttons”
– Once in recovery mode, perform full wipe
– Select ‘wipe data/factory reset’
All Files are in one zip
Only select your variant and DO NOT CROSS FLASH

Special instructions for C Variant of note 4
Make sure you flash The SM-N910C OLB (CSC) firmware before you repartition as apparently for this variant has different pit files for different firmwares)
OLB IS THE CSC CODE OF THE FIRMWARE
Example for the type firmware you need
http://www.sammobile.com/firmwares/download/60071/N910CXXU2COJ5_N910COLB2COJ5_XXV/
You can try flashing this pit with other firmwares you may have but beware you have been warned

Thank you for the PIT file. I want to re-partition my N910F, but what it means "cross flash" ? Thank you.

NEVER flash this file without rom. My phone got mad and didnt recognize ext sdcard or phone storage.. Trying to fix it at the moment..
E: I flashed the stock rom with pit file, after that I flashed TWRP + Nameless Rom. THIS IS DAMN SMOOTH NOW!

Thank you for wat you do. It work's great.

Request
Please Made one for SM-N910G..

Please make n910h. Really into the wiping / repartition my phone

Hi, i have this problem
I was install CM13 for my SM: N910C but didn't like it so, i reboot into recovry and do full wipe then flashed SIX6 and reboot i have my N910C stoped on (samsung galaxy note 4)
And not start up so, i flashed my Official soft from sammobile but did't do anything i have stop on (samsung note 4) not ( samsung logo)
So, did u think it will solved by this method? Or what?
Thanx.

ty for olb pit.

When do i need to repartition? and why it will be smoother...if someone can explain thanks.

Can somebody upload the PIT file for SM-910G Indian variant. I am on COL3, it says data partition is corrupt. Please help! I flashed the Singapore XSP Pit file and now phone doesn't go to stock recovery, only download mode accessible.

vighneshpillai90 said:
Can somebody upload the PIT file for SM-910G Indian variant. I am on COL3, it says data partition is corrupt. Please help! I flashed the Singapore XSP Pit file and now phone doesn't go to stock recovery, only download mode accessible.
Click to expand...
Click to collapse
Hi vighneshpillai90, apologies I don't have the pit file you're requesting, but I'm using the Singapore 910G and having the same problem as you.... I need the Pit file for it (I can't find it anywhere). Could u please share it here?
Thanks so much!

Note 4 PIT File for Singapore XSP variant
den80001 said:
Hi vighneshpillai90, apologies I don't have the pit file you're requesting, but I'm using the Singapore 910G and having the same problem as you.... I need the Pit file for it (I can't find it anywhere). Could u please share it here?
Thanks so much!
Click to expand...
Click to collapse
Here You go,
1. Use Odin v3.10
2. OPTIONAL - Incase you need to format emmc, select clear nand partition (only if you experience data/system partition corrupted error). This can be done only while flashing Stock Rom TAR file.
3. Make sure you select both the PIT and PBA files (So that both repartioning and installation of stock rom is done in the same session).
4. Select Repartition and Flash the device.
5. Once rebooted you will get stuck at samsung logo, dont worry, just go to stock recovery and perform a factory reset and clear cache.
6. Might take upto 5mins, but works like a charm.

vighneshpillai90 said:
Here You go,
1. Use Odin v3.10
2. OPTIONAL - Incase you need to format emmc, select clear nand partition (only if you experience data/system partition corrupted error). This can be done only while flashing Stock Rom TAR file.
3. Make sure you select both the PIT and PBA files (So that both repartioning and installation of stock rom is done in the same session).
4. Select Repartition and Flash the device.
5. Once rebooted you will get stuck at samsung logo, dont worry, just go to stock recovery and perform a factory reset and clear cache.
6. Might take upto 5mins, but works like a charm.
Click to expand...
Click to collapse
Can you tell me the step for n910h? Thx

white7561 said:
Can you tell me the step for n910h? Thx
Click to expand...
Click to collapse
Its exactly the same for every device, except just select the pit file corresponding to your device in step 3.

1000 thanks for pit file !
Ashwin Prabhunerurkar said:
I see a lot of users with partition problems like read and write errors and a lot more
People who need to re partition their note 4 can do so now
so i have decided to post the PIT files in my possession so everyone can have a smoother note 4 experience
Steps to flash PIT files in Odin (Have latest ODIN)
1. Boot the Galaxy Note 4 into download mode screen then connect to PC.
2. This time load the N910F/C/T/W8.pit Pit file on Odin’s PIT Button (Select pit file of your variant) (SPECIAL INSTRUCTIONS FOR C Variant SEE POST 2)
3. Load your original stock firmware on the Odin’s AP button.
4 Make sure repartiton is automatically checked in options
5. Click on “Start” to flash the stock firmware and PIT file then wait.
After the process is over
Turn off the phone and set it into recovery mode
– Press volume “volume up, home and power buttons”
– Once in recovery mode, perform full wipe
– Select ‘wipe data/factory reset’
All Files are in one zip
Only select your variant and DO NOT CROSS FLASH
Click to expand...
Click to collapse
I rot every my android phone and play with mods etc ...doing that last 6 years and everything was fine until couple days ago I flashed note 5 port Kyubi on my Samsung galaxy note 4 and was working awesome until 2 days ago my phone didn't want to charge I try ed with 5 others cables and chargers .I tryed factory reset , flash couple times stock Samsung firmware in odin and problem was persis, I try ed pull batery out and hod power button to drain electric out of device and also didn't help.
And than yesterday I find your pit file and flashed on my 910f and it working like a charm ...now I can carge again with what ever charger I pick and fast charging working too
Thank you so much !

hi can flash c pit file in n910h??

lfpeacemaker said:
hi can flash c pit file in n910h??
Click to expand...
Click to collapse
NOO . DONT.. sorry for caps. Its diffrent. The bootloader is diffrent too. Cause the diff modem file too

white7561 said:
NOO . DONT.. sorry for caps. Its diffrent. The bootloader is diffrent too. Cause the diff modem file too
Click to expand...
Click to collapse
Hi, thanks, will be a pit file for n910h?

lfpeacemaker said:
Hi, thanks, will be a pit file for n910h?
Click to expand...
Click to collapse
I dont have. But i see many on google. But im not risking my phone so yeah if u do found and test working. Please report and send to me
---------- Post added at 07:19 PM ---------- Previous post was at 06:34 PM ----------
lfpeacemaker said:
Hi, thanks, will be a pit file for n910h?
Click to expand...
Click to collapse
Okay. What is your csc? If like me. Im on indonesia so XSE. Whats yours