Develop Bugs

[GUIDE][PRO DUOS] Recover B5512 from soft brick using ODIN

I have soft-bricked my phone by trying to install a different kernel and ROM on my Pro Duos B5512.
Flashing only the kernel in the thread by championswimmer didn’t work because of a md5 mismatch.
This guide should also work with other samsung models if you find the right firmware (search on http://www.mod2xtreme.com/ or http://forum.xda-developers.com/showthread.php?t=1656825)
All credits go to manoranjan2050 for his great work in uploading the firmware for all the samsung galaxy y devices!
Go here to find the firmware package for the y pro duos
http://www.mod2xtreme.com/showthread...-Firmware-List
There I downloaded the latest firmware for Europe. Using Odin3 v1.85 I flashed successful and my phone is back up and running!
Here is a step by step:
1. Download and install KIES by Samsung (Odin needs these drivers to work)
2. Download odin3 1.85 (search on xda)
3. Download a firmware pack on mod2extreme
4. Open Odin and put the phone into download mode (volume down+Home+power, then select volume up to enter download mode)
5. Wait for your computer the finish the automatic driver program and your computer should recognize your phone
6. Now select the following files in ODIN (make shure auto reboot and F. reset time is selected)
-> PIT is the .pit file in the firmware map, the box in ODIN to Re-partition should be automatically checked now (if there isn't a pit file then this remains empty)
-> BOOTLOADER, select the file which has BOOT in the file name
-> PDA, select the file which contains PDA in the file name
-> PHONE, select here the file which has MODEM in the file name
-> CSC, select the file which has CSC in the file name
Info:For Save Use Do Not Use Boot loader and pit file. Do this only if everything else failed!
When everything is set-up click start and keep your fingers crossed! When everything goes according to plan your phone should restart, copy some files to system and the reboot again. Your phone is back to life! (boot could take 2-3 min)
Hope you fix your phone!
Here is a screen of ODIN when everything is finished:

Carlovn said:
I have soft-bricked my phone by trying to install a different kernel and ROM on my Pro Duos B5512.
Flashing only the kernel in the thread by championswimmer didn’t work because of a md5 mismatch.
This guide should also work with other samsung models if you find the right firmware
Searching the web for a complete firmware pack I found this forum:
http://www.mod2xtreme.com/showthread...-Firmware-List
There I downloaded the latest firmware for Europe. Using Odin3 v1.85 I flashed successful and my phone is back up and running!
Here is a step by step:
1. Download and install KIES by Samsung (Odin needs these drivers to work)
2. Download odin3 1.85 (search on xda)
3. Download a firmware pack on mod2extreme
4. Open Odin and put the phone into download mode (volume down+Home+power, then select volume up to enter download mode)
5. Wait for your computer the finish the automatic driver program and your computer should recognize your phone
6. Now select the following files in ODIN (make shure auto reboot and F. reset time is selected)
-> PIT is the .pit file in the firmware map, the box in ODIN to Re-partition should be automatically checked now (if there isn't a pit file then this remains empty)
-> BOOTLOADER, select the file which has BOOT in the file name
-> PDA, select the file which contains PDA in the file name
-> PHONE, select here the file which has MODEM in the file name
-> CSC, select the file which has CSC in the file name
When everything is set-up click start and keep your fingers crossed! When everything goes according to plan your phone should restart, copy some files to system and the reboot again. Your phone is back to life! (boot could take 2-3 min)
Hope you fix your phone!
Here is a screen of ODIN when everything is finished:
Click to expand...
Click to collapse
Nice explanation..
1. Suggestion..
Add "[GUIDE]" to your thread name.. It helps to identify what it is in mobile xda app.. and change mobile name to galaxy y variants.. As i suppose your guide covers both y duos and y phones... And lastly add link to manoranjan2050's thread (link)who is doing great work of providing all latest stock firmware updates to both duos of galaxy y.. So anyway good info..
hit thanks button! If above post helps you..
Sent from my GT-S6102

Uploading Odin Pack For Galaxy Y Pro Duos User................. 23% With 23-30 kbps Internet...........
Info:For Save Use Do Not Use Boot loader and pit file........:good::good:
U Can Also Find My Thread/Post @ http://www.mod2xtreme.com

Thanks for the suggestions and heads up guys! Will change those things.
And I will name manoranjan2050 for the credits!

Carlovn said:
Thanks for the suggestions and heads up guys! Will change those things.
And I will name manoranjan2050 for the credits!
Click to expand...
Click to collapse
dude the download link dosnt work..

Thaks for the great guide. In Nitubhaskar's compact kernel thread for our device he gave advice on how to flash stock kernel and recover from soft brick in case you brick phone while flashing custom kernel. Can you add some of that info here and credit the appropriate persons? It would be great to have all relevant soft brick info for our device. Yor thread is dedicated to recovering from soft brick and so would be the best place to have all the facts in one piece
Sent from my GT-B5512 using Tapatalk 2

Carlovn said:
I have soft-bricked my phone by trying to install a different kernel and ROM on my Pro Duos B5512.
Flashing only the kernel in the thread by championswimmer didn’t work because of a md5 mismatch.
This guide should also work with other samsung models if you find the right firmware (search on http://www.mod2xtreme.com/ or http://forum.xda-developers.com/showthread.php?t=1656825)
All credits go to manoranjan2050 for his great work in uploading the firmware for all the samsung galaxy y devices!
Go here to find the firmware package for the y pro duos
http://www.mod2xtreme.com/showthread...-Firmware-List
There I downloaded the latest firmware for Europe. Using Odin3 v1.85 I flashed successful and my phone is back up and running!
Here is a step by step:
1. Download and install KIES by Samsung (Odin needs these drivers to work)
2. Download odin3 1.85 (search on xda)
3. Download a firmware pack on mod2extreme
4. Open Odin and put the phone into download mode (volume down+Home+power, then select volume up to enter download mode)
5. Wait for your computer the finish the automatic driver program and your computer should recognize your phone
6. Now select the following files in ODIN (make shure auto reboot and F. reset time is selected)
-> PIT is the .pit file in the firmware map, the box in ODIN to Re-partition should be automatically checked now (if there isn't a pit file then this remains empty)
-> BOOTLOADER, select the file which has BOOT in the file name
-> PDA, select the file which contains PDA in the file name
-> PHONE, select here the file which has MODEM in the file name
-> CSC, select the file which has CSC in the file name
Info:For Save Use Do Not Use Boot loader and pit file. Do this only if everything else failed!
When everything is set-up click start and keep your fingers crossed! When everything goes according to plan your phone should restart, copy some files to system and the reboot again. Your phone is back to life! (boot could take 2-3 min)
Hope you fix your phone!
Here is a screen of ODIN when everything is finished:
Click to expand...
Click to collapse
LINK is not working b5512 stock framework

sphoenixp said:
LINK is not working b5512 stock framework
Click to expand...
Click to collapse
yes.. seems links are not working.. but a quick search on google gave me these links.. i dont have phone.. so cant test it..
Link
Another link

Carlovn said:
I have soft-bricked my phone by trying to install a different kernel and ROM on my Pro Duos B5512.
Flashing only the kernel in the thread by championswimmer didn’t work because of a md5 mismatch.
This guide should also work with other samsung models if you find the right firmware (search on http://www.mod2xtreme.com/ or http://forum.xda-developers.com/showthread.php?t=1656825)
All credits go to manoranjan2050 for his great work in uploading the firmware for all the samsung galaxy y devices!
Go here to find the firmware package for the y pro duos
http://www.mod2xtreme.com/showthread...-Firmware-List
There I downloaded the latest firmware for Europe. Using Odin3 v1.85 I flashed successful and my phone is back up and running!
Here is a step by step:
1. Download and install KIES by Samsung (Odin needs these drivers to work)
2. Download odin3 1.85 (search on xda)
3. Download a firmware pack on mod2extreme
4. Open Odin and put the phone into download mode (volume down+Home+power, then select volume up to enter download mode)
5. Wait for your computer the finish the automatic driver program and your computer should recognize your phone
6. Now select the following files in ODIN (make shure auto reboot and F. reset time is selected)
-> PIT is the .pit file in the firmware map, the box in ODIN to Re-partition should be automatically checked now (if there isn't a pit file then this remains empty)
-> BOOTLOADER, select the file which has BOOT in the file name
-> PDA, select the file which contains PDA in the file name
-> PHONE, select here the file which has MODEM in the file name
-> CSC, select the file which has CSC in the file name
Info:For Save Use Do Not Use Boot loader and pit file. Do this only if everything else failed!
When everything is set-up click start and keep your fingers crossed! When everything goes according to plan your phone should restart, copy some files to system and the reboot again. Your phone is back to life! (boot could take 2-3 min)
Hope you fix your phone!
Here is a screen of ODIN when everything is finished:
Click to expand...
Click to collapse
Hi, I have not used odin before, but my phone (B5512 galaxy y pro duos)
has a firmware from another country and I want to have my own
(because then I can write in my language). I have downloaded a file which
has "modem"," csc" and "pda" files only and it's the firmware other people
from my country have (B5512XXLF2) . I think my phone has Polish firmware (B5512XXLL1)
while I want the Greek one. Also, these two types seem the same
(the only difference in the code is the year month and version)
but one has greek keyboard and the other doesn't, what's the deal with that?
Will this method work for me? If not can I recover my phone?
I have not done this before and the phone is less than a month old and I am scared!
Thank you.

Recovery via odin should be possible. As for flashing Greek firmware I recommend you talk to Deadly or another expert via PM before proceeding.
Sent from my GT-B5512 using Tapatalk 2

arbayong said:
Recovery via odin should be possible. As for flashing Greek firmware I recommend you talk to Deadly or another expert via PM before proceeding.
Sent from my GT-B5512 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the information, i will try to communicate with someone

No change
Ok, I flashed the phone with the firmware some other people from Greece had, but nothing has changed. I still don't have greek language on my physical keyboard. Can anyone help, please?

i wanna just update 5512 and i download rom for egypt and this rom one file ( one package)
where put md5 ? PDA or where ?
thnQ

Good work op,helpful explianation...

[Q] Help with I9192 - I need the PIT file in order to repartition after encryption

Hello,
I have enabled full encryption on my I9192 with 4.2.2 firmware a month ago.
Now I did a hard reset, and even after flashing with various firmware via ODIN on every boot the phone is asking for the encryption password.
I just can't remove it no matter what I do via ODIN, except the PIT option.
Can someone with working I9192 3G 8GB model please send me the PIT file, so I can try to repartition (and hopefully remove the encryption password) ?
Thank you in advance guys !

I have a backup made with Efs Pro that also made an .pit file
Not sure if it is the same as Odin .pit file tho I never used repartition on any phones i had
Try to open the file with PIT Magic and see if all is ok

SilviuMik said:
I have a backup made with Efs Pro that also made an .pit file
Not sure if it is the same as Odin .pit file tho I never used repartition on any phones i had
Try to open the file with PIT Magic and see if all is ok
Click to expand...
Click to collapse
Many thanks, SilviuMik !
I have just solved the issue in another way that might be useful for the other users that face the same issue:
- the CWM provided with the custom I9192 firmwares seems to ignore the encrypted /data partition and even if it I format it, and CWM says it's formatted, it's not.
- the solution: load OEM unmodified firmware with ODIN (I9192XXUAMF7,I9192XXUAMF9,I9192XXUAMH2), then boot in recovery mode and from there select "format data partition". The OEM recovery seems to be able to format the encrypted /data partition, so now the phone booted normally.
I'll keep this file just in case I need to repartition, so many thanks again for the quick answer !
Best wishes on the New Year eve and 2014 !

I9192 official pit file

pit files for i317 and i317m

As a general FYI, if you think you need to repartition your phone it is also possible that your phone has experienced:
a) A hardware issue, possibly partial or total emmc failure.
b) A mismatch between bootloader (sboot.bin) and trustzone (tz.img) versions. See this post or my MK6 stock thread for some possible options to fix this.
As a step of last resort to recreate the partition table on your phone, a pit file may be what you need. This can be done in either Odin or Heimdall.
Warning - repartitioning your phone may erase all data and might cause other unintended consequences. You assume all risk.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
To use a pit file in Odin, this is typically done as part of a flashing a stock rom package, like the LJ2 or MA4 package for the i317 (or similar package for the i317m). You specify the pit file in the PIT section, make sure the repartition box is checked, and then add the rom package in the PDA section like usual.
If you are running an official 4.3 or later bootloader you will not be able to successfully flash a stock firmware package that contains earlier bootloaders - Odin will hang and you will need to find a different stock package to flash that does not contain a bootloader. (i.e. If you took the the i317 4.3 OTA and are running the MK6 bootloader or a later bootloader, you'll want to avoid UCAMA4)
The attached zip includes pit files for both the i317 and the i317m. The partition mapping is the same for both (see the included analysis files), but the pit files have unique security signatures which are accepted only by the bootloader of the specific model phone for which they are intended. I've tested the file for the i317 and can confirm that it works as intended. The file for the i317m was pulled the same way by an XDA member (thanks @plemen !) with an i317m and I've confirmed it is formatted correctly. It has now been confirmed as working.

If you want to learn a bit more about pit files, check out this thread by Adam Outler:
http://forum.xda-developers.com/showthread.php?t=2540480

Very interested in this, as I need the pit file for my I317. Question about the bootloader, though.... I've never taken an OTA, just flashing CM and OmniROM nightlies (was on 4.4.2 when my phone committed suicide). Should I be safe to use this pit file? And what factory firmware would you recommend to go with it?

pit files should be back in a day or two (I'll be testing over the weekend).
Depending on what happened to your phone it's still highly probable that your pit (partition) data is fine. There's a way to confirm this using Heimdall - when time permits I'll add instructions to post #2. That's a safer first step than attempting a repartition.
As for bootloader and firmware - if you've never taken an OTA, and you're not on a 4.3 bootloader your best bet for stock firmware is UCAMA4. It's a more complete and somewhat newer package than the other option (UCALJ2). You can get this from sammobile, or a mirror copy I have linked in post #2 here:
http://forum.xda-developers.com/showthread.php?t=2589891
that post also has information on a couple apps you can load that will allow you to check which bootloader you have loaded once your phone is operational.

Thanks for doing this! Did you have any luck over the weekend? Looking to re-partition as I'm unable to mount.

anine said:
Thanks for doing this! Did you have any luck over the weekend? Looking to re-partition as I'm unable to mount.
Click to expand...
Click to collapse
I expected a test phone on Saturday that didn't arrive until Tuesday thanks to the USPS getting the day off on Monday. Once I confirm the files work as intended I will repost them.
As for the issue you are having - what partition isn't mounting? Can you provide more detail?

Zen Arcade said:
I expected a test phone on Saturday that didn't arrive until Tuesday thanks to the USPS getting the day off on Monday. Once I confirm the files work as intended I will repost them.
As for the issue you are having - what partition isn't mounting? Can you provide more detail?
Click to expand...
Click to collapse
The Note 2 (ATT) suddenly rebooted and stuck on the "Samsung Galaxy Note 2" screen. A couple reboots and a battery pull did not solve the issue. I even let the phone stay on the screen in the event it needed to do some sort of repair.. but after an hour, nothing changed.
I loaded CWM recovery and got recovery mount errors. Also, I am unable to mount any of the internal file system when attempting from the advanced menu. After a couple of hours of following tutorials I went into download mode and installed the stock ATT rom. It was successful but still did not boot (attempted this twice). I came upon a few suggestions for similar issues that said the PIT file was needed to repartition. I used Beanstalk 4.4.2 before the crash.

Help
anine said:
The Note 2 (ATT) suddenly rebooted and stuck on the "Samsung Galaxy Note 2" screen. A couple reboots and a battery pull did not solve the issue. I even let the phone stay on the screen in the event it needed to do some sort of repair.. but after an hour, nothing changed.
I loaded CWM recovery and got recovery mount errors. Also, I am unable to mount any of the internal file system when attempting from the advanced menu. After a couple of hours of following tutorials I went into download mode and installed the stock ATT rom. It was successful but still did not boot (attempted this twice). I came upon a few suggestions for similar issues that said the PIT file was needed to repartition. I used Beanstalk 4.4.2 before the crash.
Click to expand...
Click to collapse
I desperately need this PIT file as well.. not on 4.3 however..I can get to download mode and into recovery but it spits a bunch of errors about unable to mount /cache etc...

anine said:
The Note 2 (ATT) suddenly rebooted and stuck on the "Samsung Galaxy Note 2" screen. A couple reboots and a battery pull did not solve the issue. I even let the phone stay on the screen in the event it needed to do some sort of repair.. but after an hour, nothing changed.
I loaded CWM recovery and got recovery mount errors. Also, I am unable to mount any of the internal file system when attempting from the advanced menu. After a couple of hours of following tutorials I went into download mode and installed the stock ATT rom. It was successful but still did not boot (attempted this twice). I came upon a few suggestions for similar issues that said the PIT file was needed to repartition. I used Beanstalk 4.4.2 before the crash.
Click to expand...
Click to collapse
The symptoms you describe are similar to those I've seen on the Q&A forum recently. I don't want to be the bearer of bad tidings, but I suspect you have a partial emmc (hardware) failure.
My time during the week is limited so I expect to have testing done this weekend.

terpencar said:
I desperately need this PIT file as well.. not on 4.3 however..I can get to download mode and into recovery but it spits a bunch of errors about unable to mount /cache etc...
Click to expand...
Click to collapse
I had similar issue, and was able to resolve it by following this thread. YOu need to restore factory original by following this thread from XDA.
Please don't forget to Thank
The files provided are only for phone I317 and not I317M
http://www.androidfilehost.com/?fid=23060877490003986
Instructions:
1. Download "back to stock" zip folder I uploaded. It contains all the files needed. No need to search around.
2. Unzip the file and extract the folder to your desktop.
3. Open folder and install Samsung drivers if not already done so.
4. Now make sure you have root and custom recovery on the phone. Turn the phone off. Hold volume up, home and power button at the same time.Wait till u see custom recovery screen and then let go off all the buttons.
5. Once in recovery... delete data, system, cache, dev cache like you want to flash a new rom. Turn the phone off by pulling the battery or see option for power off device under custom recovery.
6. Once the phone is completely off lets get into download mode. Hold volume down, home and power button until you see the screen with an option to press volume up to get into download. Press volume up to enter download mode when asked.
7. Now open odin3.07 I provided in the folder u downloaded. Once open connect your phone via usb. Windows should install device drivers. Once thats done, you should see com## on the Odin software.
8. On odin software you should see button called PDA. Click on it and browse to the file called KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user _low_ship.tar. in the folder provided by me. select it and hit ok. Odin will process the file. It will take max 2 to 3 min.
9. Before you click start on Odin make sure auto reboot and F. reset time is checked only. Everything else unchecked. Click start button. Odin will start flashing the factory firmware. It will take time.
10. Once Odin is done flashing. phone will reboot. Now you can disconnect the usb cable. When phone is fully rebooted, skip all the prompt and get to home screen.
11. Turn the phone off again and get into download mode. Connect usb cable to computer with Odin open. Click Pda and select file called CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.tar. Let Odin process it and then click start. Once flashing the root file is done. Phone should reboot to home screen. Now you have root. The reason we need root is to get rid of counter # in download more. It should say zero.
12. Connect your phone to computer while on the home screen. Open phone internal storage and go to download folder and copy Triangle away.apk into it.
13. Go into settings and security and check unknown sources.
14. Go to apps and open application "my file". Go to download folder and select triangle away application to install. install it. Open application application and scroll down and select reset counter option. Make sure your are connected to wifi. Confirm you phone is I317 and triangle away will download the file. Your phone should reboot into some type of reset counter recovery screen. follow the instruction on the screen to reset the counter. After that phone should reboot.
15. Once rebooted uninstall triangle away apk. Now open super user application and scrool down and click fully unroot. When done go into stock recovery and clear data and cache. reboot phone. All done. Your counter is set to zero. Your phone should read normal under settings.
You can update your phone under settings from att servers.
Enjoy.
Thanks to chainfire for his triangle away app and root for our device.

rob_z11 said:
I had similar issue, and was able to resolve it by following this thread. YOu need to restore factory original by following this thread from XDA.
Please don't forget to Thank
The files provided are only for phone I317 and not I317M
Instructions:
1. Download "back to stock" zip folder I uploaded. It contains all the files needed. No need to search around.
2. Unzip the file and extract the folder to your desktop.
3. Open folder and install Samsung drivers if not already done so.
4. Now make sure you have root and custom recovery on the phone. Turn the phone off. Hold volume up, home and power button at the same time.Wait till u see custom recovery screen and then let go off all the buttons.
5. Once in recovery... delete data, system, cache, dev cache like you want to flash a new rom. Turn the phone off by pulling the battery or see option for power off device under custom recovery.
6. Once the phone is completely off lets get into download mode. Hold volume down, home and power button until you see the screen with an option to press volume up to get into download. Press volume up to enter download mode when asked.
7. Now open odin3.07 I provided in the folder u downloaded. Once open connect your phone via usb. Windows should install device drivers. Once thats done, you should see com## on the Odin software.
8. On odin software you should see button called PDA. Click on it and browse to the file called KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user _low_ship.tar. in the folder provided by me. select it and hit ok. Odin will process the file. It will take max 2 to 3 min.
9. Before you click start on Odin make sure auto reboot and F. reset time is checked only. Everything else unchecked. Click start button. Odin will start flashing the factory firmware. It will take time.
10. Once Odin is done flashing. phone will reboot. Now you can disconnect the usb cable. When phone is fully rebooted, skip all the prompt and get to home screen.
11. Turn the phone off again and get into download mode. Connect usb cable to computer with Odin open. Click Pda and select file called CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.tar. Let Odin process it and then click start. Once flashing the root file is done. Phone should reboot to home screen. Now you have root. The reason we need root is to get rid of counter # in download more. It should say zero.
12. Connect your phone to computer while on the home screen. Open phone internal storage and go to download folder and copy Triangle away.apk into it.
13. Go into settings and security and check unknown sources.
14. Go to apps and open application "my file". Go to download folder and select triangle away application to install. install it. Open application application and scroll down and select reset counter option. Make sure your are connected to wifi. Confirm you phone is I317 and triangle away will download the file. Your phone should reboot into some type of reset counter recovery screen. follow the instruction on the screen to reset the counter. After that phone should reboot.
15. Once rebooted uninstall triangle away apk. Now open super user application and scrool down and click fully unroot. When done go into stock recovery and clear data and cache. reboot phone. All done. Your counter is set to zero. Your phone should read normal under settings.
You can update your phone under settings from att servers.
Enjoy.
Thanks to chainfire for his triangle away app and root for our device.
Click to expand...
Click to collapse
Thanks.. It just hangs at system.img in odin

Nice job Zen
Sent from my SGH-I317 using XDA Premium 4 mobile app

Pit files are back up and attached to the OP. The i317 pit file is tested and confirmed working.
The i317m file is identical, except for the security signature. I'm currently looking for someone with a healthy i317m willing to test flash the i317m pit file to confirm it works. (I would do this myself, but I don't have an i317m).

Unfortunately it did not work for me. emmc failure suspected. Strange thing is that in ODIN I can still "Successfully" install a ROM.. and even the PIT file succeeded. I still got a logo screen for several minutes.
Fortunately for me, I have an additional mainboard from a otherwise damaged note 2. I'll be swapping that out.
Thank you anyway. Hope your file helps others!

My phone was not booting and stopped at Samsung logo. After the pit file and stock rom, my phone is live again. I am still having issue with storage but at least I have good starting point.
thanks

Works fine on i317m

anine said:
Unfortunately it did not work for me. emmc failure suspected. Strange thing is that in ODIN I can still "Successfully" install a ROM.. and even the PIT file succeeded. I still got a logo screen for several minutes.
Fortunately for me, I have an additional mainboard from a otherwise damaged note 2. I'll be swapping that out.
Thank you anyway. Hope your file helps others!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2626593

qkster said:
http://forum.xda-developers.com/showthread.php?t=2626593
Click to expand...
Click to collapse
See posts #9 and #13 on the thread above for the specific potential solution to try.

Corrupt pit file it says. for note 2 att help
I have a Att note 2 i flash the mj9 firmware using mobile odin first. Then i formatted storage, data, system, and cache. And now its says i have NO ios Installed with is true but when i try flashing another rom in TWRP it fails iv'e try stock ATT, Jedi Rom, MeanBean Rom. now i tryed to flash stock firmware through J Odin but it always say corrupt pit file...Someone Please Help MEE

kumar_420 said:
I have a Att note 2 i flash the mj9 firmware using mobile odin first. Then i formatted storage, data, system, and cache. And now its says i have NO ios Installed with is true but when i try flashing another rom in TWRP it fails iv'e try stock ATT, Jedi Rom, MeanBean Rom. now i tryed to flash stock firmware through J Odin but it always say corrupt pit file...Someone Please Help MEE
Click to expand...
Click to collapse
Err mj9 is verizon haha
Sent from my lightning fast Note II running MeanBean 2.0 SuperCharged

[Q]E:failed to mount /system (Invalid argument)can't mount '/system' (Invalid.....

I nEED hlep Urgently
I rooted my sisters Grand duos for checking my miui7 rom...She used it for few days and She is going back next day.So she told me to unroot and flash stock rom for her.So i downloaded a stock 4.1 rom and downloaded odin 3.07.But i forget to reset flash counter to offical by using triangle away app and i go straight to download mode and flashed that 4.1 stock rom.Everything goes right and after finishing grand boot into recovery by showing some errors( screenshot of error is attached below).something like E:failed to mount.........So i wiped cache and data and everything and goes to download mode again at that tym i noticed that Custom bin is not 0.but again i flashed but same error...i flashed more than 10 tyms same result.
Then i decided to redownload but same error.I downloaded philz touch recovery v5 for grand in .md5 format and flashed,It get flashed correctly and i booted to recovery and tried to flash cm11,cm12.1...but all result into bootloop.She have a nandroid backbut(which was made on philztouch v6) so i tried to recover it but its showing ".md5 not same"(something like that).....Please she need to go next day so i want to fix it back as fast as possible....Please help
what i found so far:
I figured out that this is causing due to corrupted internal sdcard partition.Anyone give me a solution.How to fix a corrupted internal sdcard partition

I Fixed it by myself.
IF you also facing this you can fix it by this method
1. Run Odin with Administrator Privileges. Hope everyone is familiar with using Odin
2.Connect your Galaxy Grand Duos I9082 inn Download Mode (HOLD Volume Down+Home Button+Power) and see phone gets detected by Odin.
3. Click on the PIT Button in Odin and select the .pit file you have downloaded.
4. Click on PDA, and Browse for the original Stock Firmware File of Samsung Galaxy Grand I9082.
5. Ensure that The Checkboxes Auto Reboot, Re-Partition, F. Reset Time are checked.
Click to expand...
Click to collapse
you can use this method for any device just replace Galaxy grand duos by ur device name
you can get .pit file from google....Or if found any difficulty in getting pit....Just send me a pm..

rohit1521 said:
I Fixed it by myself.
IF you also facing this you can fix it by this method
you can use this method for any device just replace Galaxy grand duos by ur device name
you can get .pit file from google....Or if found any difficulty in getting pit....Just send me a pm..
Click to expand...
Click to collapse
Thanks for sharing.
But don't forget, pit file usually different from device to device, just certain is the same. If wrong pit file flashed to wrong device, might brick it.

Can't get out of ODIN mode

I tried to install TWRP, but I had some problem with that. After I tried couple of time I stack in Downloading mode.
Now I can't get out of odin mode, no mather what I do.

Make sure that the recovery is compatible with your phone
Or
Try to download ofw riginal firmware of s4 mini
And flash it

yahiahedna said:
Make sure that the recovery is compatible with your phone
Or
Try to download ofw riginal firmware of s4 mini
And flash it
Click to expand...
Click to collapse
I tried both but dosn't helped.
Sent from my HUAWEI G6-U10 using Tapatalk

Hold the power button it will end the download mode.
Have you flashed the right TWRP or FW to your phone The S4 mini are have different Versions.
9190 / 9192 / 9195 and the newer Device 9192 I and 9195 I.

bierma32 said:
Hold the power button it will end the download mode.
Have you flashed the right TWRP or FW to your phone The S4 mini are have different Versions.
9190 / 9192 / 9195 and the newer Device 9192 I and 9195 I.
Click to expand...
Click to collapse
Thanks.
I finaly find right TWRP for my device 9195I, and I finaly start TWRP but now I have new problem.
I tried to install LineageOS, but I get an error:
"could no detect filesystem for /dev/block/bootdevice/by-name/system, assuming ext4 mount: failed to mount /dev/block/bootdevice/by-name/system at /system: No such file or directory"
I tryed to add a photo but I don't know how??
Any idea where is the problem?

Try to reboot from TWRP to Recovery
Than install the ROM
Make a backup!
Reboot into recovery
Wipe data (You may get a "staus 7" error if you fail to wipe.)
Install the Current ROM
Optionally install Gapps
Boot phone into normal mode

bierma32 said:
Try to reboot from TWRP to Recovery
Than install the ROM
Make a backup!
Reboot into recovery
Wipe data (You may get a "staus 7" error if you fail to wipe.)
Install the Current ROM
Optionally install Gapps
Boot phone into normal mode
Click to expand...
Click to collapse
I tred but the problem is the same.
"could no detect filesystem for /dev/block/bootdevice/by-name/system, assuming ext4 mount: failed to mount /dev/block/bootdevice/by-name/system at /system: No such file or directory"

OK, go complete back to Stock, flash the ROM with Pit.file and than try again to flash TWRP and Los 14.1

bierma32 said:
OK, go complete back to Stock, flash the ROM with Pit.file and than try again to flash TWRP and Los 14.1
Click to expand...
Click to collapse
Pit file?
Where can I get it?
How to flash?
Thanks.
Sent from my HUAWEI G6-U10 using Tapatalk

Install samfirm https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Download a multiple firmware, in side of CSC.image you find the pit.file.

bierma32 said:
Install samfirm https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Download a multiple firmware, in side of CSC.image you find the pit.file.
Click to expand...
Click to collapse
As you sugested I downloaded stock firmware for my device" I9195IXXU1AQA7.....tar.md5", but I don't find any pit file.

Copy the CSC.img to a sperate Folder, unzip the image and than you have got the Pit.file.
https://www.pocketpc.ch/attachments...galaxy-s7-s7-edge-g930f-g935f-unbenannt5.jpg?
Under Pit you must select the the file and actived the Repartion Option.
Samfirm
https://www.pocketpc.ch/attachments...-galaxy-s7-s7-edge-g930f-g935f-unbenannt1.jpg
Odin
https://www.pocketpc.ch/attachments...amsung-galaxy-s7-s7-edge-g930f-g935f-odin.png

bierma32 said:
Copy the CSC.img to a sperate Folder, unzip the image and than you have got the Pit.file.
https://www.pocketpc.ch/attachments...galaxy-s7-s7-edge-g930f-g935f-unbenannt5.jpg?
Under Pit you must select the the file and actived the Repartion Option.
Samfirm
https://www.pocketpc.ch/attachments...-galaxy-s7-s7-edge-g930f-g935f-unbenannt1.jpg
Odin
https://www.pocketpc.ch/attachments...amsung-galaxy-s7-s7-edge-g930f-g935f-odin.png
Click to expand...
Click to collapse
Thank you for you help, but I finaly managed to install stock firmware, install TWRP recovery and lineageOS.
The problem was "hidden.img.ext4" file in stock firmware. After I delete this file, there was no more problem with installation.
Thanks again.
Best regards.