Hi, I have a zx551ml (WW) with locked bands. I tried to change the calib.nvm file (wrong file from ze551ml) but now the phone does not recognize the sim card. I would try to change it with an original zx551ml calib.nvm. Can anyone help me? Thanks.
Related
hello...
i have 1 Softbank X02HT from Japan which came out lock to provider from softbank.. i want to unlock this phone, so i bought unlocking codes from a friend but when the codes arrived and i want to enter it but i cant figure out how to key in those codes,, ive searched a lot of forums how to enter those codes but it seems like my phone is "Counter Blocked" some says i had to flash other roms to be able to enter those codes until i read this http://forum.xda-developers.com/showthread.php?t=398945 now the problem is i cant Application Unlock my phone when i use SDA Application and i gives me error like "Phone is not unlockable"
my phones info :
CAVA100
IPL-0.04
CAVA100
SPL-1.00.0000
please help me to get through with it...
thanks...
LiquidSky said:
hello...
i have 1 Softbank X02HT from Japan which came out lock to provider from softbank.. i want to unlock this phone, so i bought unlocking codes from a friend but when the codes arrived and i want to enter it but i cant figure out how to key in those codes,, ive searched a lot of forums how to enter those codes but it seems like my phone is "Counter Blocked" some says i had to flash other roms to be able to enter those codes until i read this http://forum.xda-developers.com/showthread.php?t=398945 now the problem is i cant Application Unlock my phone when i use SDA Application and i gives me error like "Phone is not unlockable"
my phones info :
CAVA100
IPL-0.04
CAVA100
SPL-1.00.0000
please help me to get through with it...
thanks...
Click to expand...
Click to collapse
so u r able to unlock the sim or not?
cruzzmz said:
so u r able to unlock the sim or not?
Click to expand...
Click to collapse
hello...
i just able to sim unlock the phone via code after flashing this firmware http://rapidshare.com/files/14940579...0_182_Test.exe
but still i cant app unlock the phone... i want to flash WWE rom..
i tried using mtty but then it shows:
CMD>task 32
"Level=FF"
please do help me...
thanks
LiquidSky said:
hello...
i just able to sim unlock the phone via code after flashing this firmware http://rapidshare.com/files/14940579...0_182_Test.exe
but still i cant app unlock the phone... i want to flash WWE rom..
i tried using mtty but then it shows:
CMD>task 32
"Level=FF"
please do help me...
thanks
Click to expand...
Click to collapse
try the hard SPL thread ... there is a program to unlock the phone
cruzzmz said:
try the hard SPL thread ... there is a program to unlock the phone
Click to expand...
Click to collapse
thanks...
the phone is SIM Unlocked now...
but i got this error after using HardSPL-Cavalier-1.0-JockyW
thanks...
LiquidSky said:
thanks...
the phone is SIM Unlocked now...
but i got this error after using HardSPL-Cavalier-1.0-JockyW
thanks...
Click to expand...
Click to collapse
Error 270 ... U must do HardSPL first ... Pls follow instruction on the Hard SPL thread
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
yukster said:
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
Click to expand...
Click to collapse
Have u tried tis tool?
http://forum.xda-developers.com/attachment.php?attachmentid=91644&d=1213100403
what's the end of the story ?
these japanese guys just gone with the wind.
Maybe it's work, because I just did a test on my x02ht. I’m able to modify register through CeRegEditor after SDA_ApplicationUnlock.
Need help to Flash X02HT from JAPAN
HI,
I have been trying desperately to unlock this phone. Before I buy code I need to know it it can be unlocked. When I power on the phone a window keeps popping up with or without asking for SIM unlock code.
I tried JumpSPL and keep get an error: CreateProcess failed with errorcode =30123 - UNKNOWNERROR 0X000075ab.
I still tried HARD SPL -Cavalier 1.0 JockyW and keep getting an error :-
ERROR (270): UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
Please LiquidSky have a file that he used from rapidshare and flashed his phone successfully can anyone share with me please?
I need urgent help
Thanks
I have the same problem. I would appreciate if someone knows how to solve it.
Thanks!
Totalelectronics said:
HI,
I have been trying desperately to unlock this phone. Before I buy code I need to know it it can be unlocked. When I power on the phone a window keeps popping up with or without asking for SIM unlock code.
I tried JumpSPL and keep get an error: CreateProcess failed with errorcode =30123 - UNKNOWNERROR 0X000075ab.
I still tried HARD SPL -Cavalier 1.0 JockyW and keep getting an error :-
ERROR (270): UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
Please LiquidSky have a file that he used from rapidshare and flashed his phone successfully can anyone share with me please?
I need urgent help
Thanks
Click to expand...
Click to collapse
yukster said:
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
Click to expand...
Click to collapse
TESTED and working.......
good ..................................................
Hi everyone,
I guess many of you are in huge pain with the KU990 new version, that is, the ones that cannot be unlocked using lg3g or mtty methods.
Here I would like to describe everything I tried so far and the current status I am locked in today.
My biggest mistake was to not backup my phone (the famous .nv2 file) at the very beginning ! I strongly advise people who wish to modify their phone somehow to first backup with LGMDP !! Otherwise you may end just like me...
I started with a SFR (VDF FRANCE) locked phone and, as I did not have the SFR sim card at that time, I tried to unlock it with both the lg3g and the mtty methods. Unfortunately the unlocking procedures did not work at all, although I ensure I tried everything. I finally read somewhere that the newest KU990 had a supplementary protection that could not be overcome.
In parallel I was able to manage to change the firmware to OPEN or VDF (EURO) versions ranging from v10a to v10j (using LGMDP). So it seems that there is no big issue there.
However at some point in the process (I guess the unlocking), my IMEI was changed. And my phone started to ask me to "Insert USIM card" or to refer to "Invalid USIM card" depending on if a sim was in or not. I understood that USIM was referring to international sim cards so I tried to reinstall VDF firmwares with VDF .nv2 and VDF Flex backups (still not mine), but this made my phone unusable as it displayed a nice yellow screen and the fact that some wallpaper file could not be found. Still I could solve this problem by I changing back to OPEN firmwares and .nv2.
Now I recovered the original sim card from SFR and was able to obtain the unlock code from their hotline. But as my IMEI has been changed, the unlock code fails now.
Thus I tried to reset or to change my IMEI back to what is written below the battery using either lg3g, mtty, QPST or NVEditor. This also leaded nowhere as even reading the IMEI with lg3g and mtty failed and as QPST and NVEditor revealed that the NV_UE_IMEI_I parameter was protected (NV_READONLY_S). I tried many different things with these tools but it does not seem possible to break the protection.
I guess my only chance now would be to insert my old IMEI into an existing .nv2 file. I have found some "NV2 - QCN TOOLS V1.4" that can do this but only on the KU20.
Does anyone has a tool allowing to insert a new IMEI in a .nv2 ?
OR
Did anyone go through the same difficulties and did finally find a solution ?
any help will be greatly appreciated )
please do not ask me how i did this or that for the moment, if I can solve my problem I will certainly return the favor to all of you later on.
Hello,
Have you tested the tools for the KS20, because the. NV2 is certainly quite similar.
@+
Thank you for your suggestion.
I tried the tool but first it returns a NV2 Status Error when I load any .nv2 file, second the IMEI is forced into 357323-01-XXXXXX whereas both my original and current IMEIs start with 353638-02, and third, although the tool indeed creates the file (I chose "Branded nv2"), the backup fails (LGMDP reports four NV ITEMs with NV_BADPARM_S with no more information) and I end up in Emergency mode.
A KU990 version of the tool might do the trick, if it is possible to specify the full IMEI of course. I can send my current nv2 file(s) if it can help anyone...
hi,
Can you send me by PM your backup NV2, the original IMEI and IMEI on your phone now.
By.
bl40
hello.sorry for my bad english.
a have a big problem with my lg bl40.
i flash the gsm with new rom , but i not make back up of the nv2 file.
download this file from internet but with different imei.
what can i du, pleas help my.
A valid nv2
Please can someone send a valid nv2 for lg P500, i`m from romania. many thanks
hi,
uses the search function it works fine
http://forum.xda-developers.com/showpost.php?p=22671293&postcount=52
hellp
pleace send IMIE code (nv2) for iran
my email [email protected]
tank you
anyone knows that is what brings each efs file because I lost 1 and take just 2 to 3 and when I use the phone without SIMCARD shows me the correct IMEI and when I put SIMCARD imei is null, I ran out signal kdz and put the stock via LG official update which is the automatic download and everything factory resets, but still no signal.. Is a e987, is any method to solve it?
I am able to get a m9kefs1.img from the same model and put in my phone, but i think it could create conflicts
BEFORE YOU READ THIS ARTICLE:
- This is not a step by step explanation. There are already published tutorials with very good explanations. However, I will share my own experience and try to guide you and solve the problems you may encounter when unbricking your phone.
Said so,
I wanna thank you all for the effort you put in to demystify the unbrick of this beautiful smartphone. However, some of us have experienced problems after all those steps.
So, for those of you who have these problems:
MY IMEI IS 0049... -----> search for a tutorial on how to use PhoneTool 191. You have 2 options - (1) Install a SERVICE ROM (already rooted) and change both IMEIs (using setprop to change the target IMEI) or (2) ROOT your current ROM and use ADB with these commands - adb shell | su | setprop system.at-proxy.mode 1 (for SIM 1) and setprop system.at-proxy.mode 3 (or 4) for SIM 2.
MY SIM 1 IS "NOT INSTALLED" ------> If you suspect it is not a hardware problem, then deactivate SIM 1. Remove SIM Card from Slot 1. Then, activate SIM 1. Insert Card and wait for PIN insertion. Keep trying this or alternatively insert SIM Card on SLOT 2. Then insert PIN. Deactivate SIM 1. Remove SIM Card from SLOT 2. Activate SIM 1 and after the message INSERT SIM 1 on SLOT 1. It should ask for a PIN. At least on my case using last WW ROM 5.0 (UL-Z00A-WW-2.20.40.198-user.zip) .
MY SLOT 1 ALREADY ASKS FOR PIN BUT I SEE NO NETWORK/CROSS ON THE NETWORK ICON -----> if your IMEIs are already the right ones/not blocked in your operator, you should check if your PHONE's SERIAL NUMBER is correct. If it is not, there is a file called factory.zip where you can alter file "ssn" and file "PhoneInfo_inf" to your correct serial nr. NOTE: YOU MUST USE AN HEX EDITOR CAUSE "ssn" file should finish the serial number with an HEX "0A". Reboot phone and everything should be fine.
IF THERE IS STILL NO NETWORK.. and probably your phone is a CN version (like mine), you SHOULD UNLOCK BOOTLOADER. I wasn't able to do it with the official APK, probably because of my bad serial (even after I corrected it with the method described). So I googled it and found some nice tools: http://forum.xda-developers.com/zenf...odder-t3458145. Use the "UNLOCK.bat" file.
- After unlocking bootloader, when the OS started, my phone started to gather network on SIM 1!!!
If you have questions or doubts and need a more detailed explanation, feel free to post it here. I will try to help you out. And btw, if you cannot repair your serial using ASUS FLASH TOOL (AFT) and a RAW file of an original ROM, probably the bootloader is locked and you need to change the serial manually (you must copy factory folder of factory.zip file into the root path of your phone and of course, change ssn and PhoneInfo_inf files using an HEX Editor like xview32 freeware like I said before).
FACTORY.ZIP --> http://www.megafileupload.com/oz7F/factory.zip
I hope you can fix your SIM 1 SLOT :good:!
Big hug from Portugal,
João
hello link for factory.zip don't work. can you re upload please ?
Hello, i dont know how this came but i doesnt have imei anymore or its 0 and detect no baseband
Has Anyone a qcn File or can help me?