Has anybody tried the tetrax mounts yet with their galaxy nexus? Before I purchase one I'm curious of two things.
1. How well does the the magnet stick to the battery door since the battery cover is textured? I have an extra cover that I'll use simply for this.
2. Does the magnet interfere with the NFC and/or screen at all?
In case your not sure what I'm referring to:
http://store.tetrax.us/xway-line/fixway
I have used this on other phones, including my G2, MyTouch 3G and G1 and it worked very well on all those phones. However, due to the textured back on the Galaxy Nexus, the metal button that stick to the battery door does not stay on. I have tried replacing the double sided tape with stronger automotive 3M tape, but that doesn't work either. It'll stay on for a little while and come back off. The only solution would be to find a battery door that is smooth.
I can't answer if it interferes with NFC or the screen, but it shouldn’t. If anything, it might interfere with the magnet on the compass, but that has not been the case with my other phones.
MetalMessiah78 said:
I have used this on other phones, including my G2, MyTouch 3G and G1 and it worked very well on all those phones. However, due to the textured back on the Galaxy Nexus, the metal button that stick to the battery door does not stay on. I have tried replacing the double sided tape with stronger automotive 3M tape, but that doesn't work either. It'll stay on for a little while and come back off. The only solution would be to find a battery door that is smooth.
I can't answer if it interferes with NFC or the screen, but it shouldn’t. If anything, it might interfere with the magnet on the compass, but that has not been the case with my other phones.
Click to expand...
Click to collapse
Thanks,
So you've actually tried it on the GNex and it don't stick very well? Did you by chance try holding it on there for several hours with a strong clamp or anything? I really want one of these but worried it's a waste of money with this phone
I have actually tried it, but not with a clamp. Just following the regular directions. On my other phones, it created a very strong bond and it takes a lot of effort to remove. With the Nexus, it stays on the first couple of times you mount it, but that's about it. It's not an issue with the weight, as the G2 feels twice as heavy as the Nexus, especially with an extra capacity battery. It's the texture on the battery door. It almost feels like it has a Teflon coating.
MetalMessiah78 said:
I have actually tried it, but not with a clamp. Just following the regular directions. On my other phones, it created a very strong bond and it takes a lot of effort to remove. With the Nexus, it stays on the first couple of times you mount it, but that's about it. It's not an issue with the weight, as the G2 feels twice as heavy as the Nexus, especially with an extra capacity battery. It's the texture on the battery door. It almost feels like it has a Teflon coating.
Click to expand...
Click to collapse
Would you mind holding up one of the magnets to the battery door and test out the NFC to see if it interferes with it (if you have the ability to). This is my main question as I could always put the magnet on a case I guess.
Thanks!
I don't have another NFC device to try it right now, but my brother has the Nexus S and I can try it when I see him later tonight. The magnet doesn't go on the battery door though. What you stick on the battery door is just a piece of metal. The actual magnet is on the device that you mount to your dash or vent, so unless you plan on using NFC while it's on your dash, it should not interfere.
Plus, NFC uses low power radio frequency to transfer information (similar to Bluetooth). It does not use magnets. The only thing in the phone that could be affected would be the compass, as it finds your relation to magnetic North. Even then, I'm sure the compass works through software and is not an actual magnet, as it has never affected GPS. As a matter of fact, I have 2 Tetrax products, the one that mounts to the dash, which I have in my car, and the one that you attach to the vent for when I use a rental on trips for the sole purpose of Navigation. As you can imagine, I was very disappointed when I could not get the metal button to stick. I might have to try it with a case also.
MetalMessiah78 said:
I don't have another NFC device to try it right now, but my brother has the Nexus S and I can try it when I see him later tonight. The magnet doesn't go on the battery door though. What you stick on the battery door is just a piece of metal. The actual magnet is on the device that you mount to your dash or vent, so unless you plan on using NFC while it's on your dash, it should not interfere.
Plus, NFC uses low power radio frequency to transfer information (similar to Bluetooth). It does not use magnets. The only thing in the phone that could be affected would be the compass, as it finds your relation to magnetic North. Even then, I'm sure the compass works through software and is not an actual magnet, as it has never affected GPS. As a matter of fact, I have 2 Tetrax products, the one that mounts to the dash, which I have in my car, and the one that you attach to the vent for when I use a rental on trips for the sole purpose of Navigation. As you can imagine, I was very disappointed when I could not get the metal button to stick. I might have to try it with a case also.
Click to expand...
Click to collapse
Awesome so yea I don't think it'll interfere because I was thinking the part you stick to the back of the phone is magnetic, but if your saying it's not all should be well. Either way I went ahead and ordered it yesterday anyway so I'll figure out a way to get it to stick to either the door or a case. Thanks for your insight!
Nope, it's just a metal button. It actually comes with 4 or 5 different ones of all sizes and styles.
I have this installed on my nexus, I put the mount on my dash and the NFC sticker on my knob for the ac that get covered up. Everytime I put my phone on the mount, the nfc changes it to car mode, volume up, full brightness and launches sirius xm radio...works very well, sometimes I have to move it a bit to get to read the nfc, but thats only cause i have the nfc a little too far at the bottom of the phone and it mounts at a slight angle, not due to any interference at all. I have NFC chips all around and never have problems reading them at all, probably a good idea not to mount the metal chip right in the middle of the battery area, just in case. I also used a clamp to hold it on for about 3 or 4 hours and has had little trouble sticking to the texture.
I have had a few incidents if I pull off the phone, rather than slide it off the backing will actually unclip a single clip.
@ejkeebler what do you mean by NFC stickers all around? Did you make stickers to automatically change your settings on your phone? That's brilliant! How did you do it?
I might also have to try a clamp. I don't really want to put a case on my phone.
MetalMessiah78 said:
@ejkeebler what do you mean by NFC stickers all around? Did you make stickers to automatically change your settings on your phone? That's brilliant! How did you do it?
I might also have to try a clamp. I don't really want to put a case on my phone.
Click to expand...
Click to collapse
I also have NFC stickers everywhere. have them when I walk in the front door of my house, one in my office at work, one in each vehicle, one in my wallet LOL. They are awesome. Set them to change settings or do tasker tasks and you can rewrite over them if you ever want to change anything. One of the best phone features I've ever used. That's why i was concerned about the magnets interfering with the NFC!
dcoy82 said:
I also have NFC stickers everywhere. have them when I walk in the front door of my house, one in my office at work, one in each vehicle, one in my wallet LOL. They are awesome. Set them to change settings or do tasker tasks and you can rewrite over them if you ever want to change anything. One of the best phone features I've ever used. That's why i was concerned about the magnets interfering with the NFC!
Click to expand...
Click to collapse
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
raing said:
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
Click to expand...
Click to collapse
A quick search came up with this: http://www.tagstand.com/
Seems like this could open up a whole line of fun options. Would love to hear how others have done it, though.
raing said:
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
Click to expand...
Click to collapse
www.tagstand.com to purchase the tags. Tell him DCoy82 sent you! The 30mm ultralight c circle NDEF formatted seem to be the only ones I've bought that work with the nexus so far.
Once you get them you can download program called NFC Task Launcher off the market to program them.
Sent from my A500 using Tapatalk
dcoy82 said:
www.tagstand.com to purchase the tags. Tell him DCoy82 sent you! The 30mm ultralight c circle NDEF formatted seem to be the only ones I've bought that work with the nexus so far.
Once you get them you can download program called NFC Task Launcher off the market to program them.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
That is so awesome. This is my first phone with NFC so I'm barely starting to learn all the cool things that you can do with it. I tried Android Beam for the first time with my brother on Tuesday and it works great, though I wish you could beam other things such as pictures. By the way, the metal button does not interfere with NFC. I will let them know that you recommended me. Thank you!
If your interested in NFC, here's a few spots that got me started
http://androidforums.com/nexus-s/336155-what-do-you-use-nfc-tasker.html
http://www.readwriteweb.com/archives/weekend_project_make_your_own_nfc_tags.php
http://www.youtube.com/watch?v=LnqmyNEQPq0&feature=email&email=comment_reply_received
and the tags I bought were from here:
http://tagsfordroid.com/tags/Home.html
I got them cause i liked the having the android on them, i think they are a tiny bit less expensive elsewhere, and these are a little thicker than I'd like (like a puffy sticker, about the same thickness of a penny) but you can get many in other places.
by itself i'm not sure nfc task launcher does it for me, but in combination with tasker, it's ridiculous how much can be done....would still love to see what others have come up with.
I love those stickers with the Android! Thanks for the links. I will need to read up on it more. I am definitely interested. This is a lot more exciting stuff then what Google showed off at the I/O last year!
Thats a good idea. Being in IT, we have dead Hard Drives laying around that have awesome magnets in them. They're real slim. I bet I could superglue one to my nexus's battery cover for under the TPU case that would hold. They're thin so it might not screw with the case (but it might).
ejkeebler said:
I got them cause i liked the having the android on them, i think they are a tiny bit less expensive elsewhere, and these are a little thicker than I'd like (like a puffy sticker, about the same thickness of a penny) but you can get many in other places.
Click to expand...
Click to collapse
Yeah, it looks like it's $8 for 2. I just picked up 5 over at tagstand.com for the same price and found 10 for $13 over at http://buynfcstickers.com.
Hopefully you guys are all having good experience with the guy at tag stand. His customer service was great for me and I'll definatley be going back there in the future.
Oh and by the way, I got my new tetrax magnet set in today and not having any issues with the magnet at allowing necessary nor with the metal part sticking to the stock battery door. Only real issue so far is you have to slide it off just right or the battery door just pops off the nexus lol. Highly recommend though!
Sent from my A500 using Tapatalk
Have had bad experiences with cases where the magnets haven't cooperated and the auto-sleep feature has been less than convenient. The s pen hasn't worked correctly and sometimes the tablet has gone to sleep without me touching the power button... just because the case has been folded so that the magnet has been pressed to the back of the tablet. Cheap cases? I confess... yes they have been. But after the first one I didn't really want to risk buying a more expensive one just to end up sitting with the knife and cutting out the magnet again. So l bought another cheap one... to see if the first one had been a "bad luck buy". Well, it wasn't and the second one behaved the same way... and the third one too. Is this a typical "cheap case thing" or is it something you can expect also with the more expensive ones? The best thing would of course be if this was an optional feature... that you can disable. On my iPad it's optional with a switch in the settings. I haven't found something on the Note 10.1 though. So my questions are...
• IS this a typical "cheap case syndrome"?
• IS the function optional on the Note 10.1 2014? (Or can it be done in another way?)
/ Nick
Runarsson said:
Have had bad experiences with cases where the magnets haven't cooperated and the auto-sleep feature has been less than convenient. The s pen hasn't worked correctly and sometimes the tablet has gone to sleep without me touching the power button... just because the case has been folded so that the magnet has been pressed to the back of the tablet. Cheap cases? I confess... yes they have been. But after the first one I didn't really want to risk buying a more expensive one just to end up sitting with the knife and cutting out the magnet again. So l bought another cheap one... to see if the first one had been a "bad luck buy". Well, it wasn't and the second one behaved the same way... and the third one too. Is this a typical "cheap case thing" or is it something you can expect also with the more expensive ones? The best thing would of course be if this was an optional feature... that you can disable. On my iPad it's optional with a switch in the settings. I haven't found something on the Note 10.1 though. So my questions are...
• IS this a typical "cheap case syndrome"?
• IS the function optional on the Note 10.1 2014? (Or can it be done in another way?)
/ Nick
Click to expand...
Click to collapse
Firstly I have a book cover and have no trouble. I think it is a cheap case thing. Samsung official book cover has magnets in it and from what people say they have no issues with them. In settings there are an options for the book cover in accessories section try play with those settings.
BTW: the name of my case is Snugg it was $18.
Sent from my SM-P600 using XDA Free mobile app
Funny thing... maybe something I should keep to myself. But what the heck. Noone here knows me anyway. I found the option now... and not only that. I had actually turned it off. I must have done it by mistake while looking for it, because I sure can't remember ever finding it. Blind or senile. I must be at least one of them. LOL
But out of curiosity. I gather it must be some kind of sensor in that area since l was moving the cover's magnet area around and when it came close to that area it turned off without the screen being covered. Does that setting control the function or does it control the sensor itself? (If it only controls the function, the S Pen would still have behaved weird. around that area.)
Well, thank you anyway. Now I don't have to wonder about the setting anymore. Now I'm more worried about how come I never found it myself. l thought I had looked everywhere... including that area. But now I found it instantly. Far from hidden (even in a settings group with the NAME 'Book cover'). Maybe time for the annual doctor's checkup.
Are there any apps available to utilise the smart cover more effectively? It currently doesn't do very much.
bonerp said:
Are there any apps available to utilise the smart cover more effectively? It currently doesn't do very much.
Click to expand...
Click to collapse
Mine doesn't even work!
It turns the screen on for case mode when the top flap is tucked behind the phone instead of in front ..
Sent from my PORSCHE DESIGN HUAWEI Mate 9
bonerp said:
Are there any apps available to utilise the smart cover more effectively? It currently doesn't do very much.
Click to expand...
Click to collapse
It is a good idea, similar of what already happenned with LG and Samsung phones (that I kwow...) but only Call is really "active", as you can accept a call without opening the cover.
Apart from that I get sms notification but touching the icon on cover does nothing...
Cover does not work with third part sms apps, not even with other system apps such as calendar
it's actually not really useful coz the display will only last for a couple of minutes then it will turn the screen off.
I made a hole in my smartcase, so that I can see the notification LED. I used a tool that makes holes in a belt.
I've spent the better part of the week scouring for good s8+ cases that would be compatible with wireless charging and in the end I've hodge podged pieces into a frankencase
seeing as I'm probably going to make myself a case I thought I'd share the elements of what I was looking for and ask if I'm just crazy for wanting so much or if I'm not alone.
I don't need much coverage, mostly the corners and a raised edge in case it does fall but otherwise I'm not concerned with protecting the fronts and backs given how rarely I drop my phone if I've got an actual grip on it no thanks to the slippery materials they use
I'd like direct access to my buttons, many cases have their own button that pushes the actual button, I've never enjoyed this as it's usually stiff or hard to press and often hard to distinguish from the case itself
wireless compatibility is a must for me given the fact I'm not only on the road most of the day but I'm constantly in and out of the vehicle where I'm definitely not leaving my phone that I'll probably actually need, and having to work a harness gets annoying during regular use imagine 30+ times a day
this means something magnetic so it sticks in place like the airdock 2 which I have no idea if it's compatible with s8+ or not as of yet
getting back to the in and out I need a hip holster because I spend way more time texting and taking photos of job sites than talking so a headset is less important than not having to fish for my phone
lanyards are just good ideas, why is it so rare to find them let alone on a rugged case?
a kickstand doesn't have to be complicated either and doesn't need an entire phone length if you know what you're doing with it, spigeon has a nice stick on that generally gets the job done, or even those ring mounts double as kickstands and great dash magnet mounts
who puts a card holder behind the case right in the magnetic field of wireless charging? it's called a folio cover geez, even those work as kickstands in a pinch as flimsy as they are in that capacity.
granted with all the mobile payment options these days you generally don't need to worry about a card in the first place so it's coming time to uncouple those two
and on a side rant why are we still using adapters and converters for magnetic break away cables? shouldn't this be standardized by now?
I'm going to sketch up the case I'm thinking of and post back maybe you guys can tell me why it's such a ridiculous idea to have.
I wanted the equivalent of an iBolt with a wireless charger in the end I wireless charge at home and use a magnetic power connector on the car.
All the ones I found only gave portrait and I preferred to use landscape
What car charger are you using?
Sent from my SM-G955F using Tapatalk
Tonesav said:
I wanted the equivalent of an iBolt with a wireless charger in the end I wireless charge at home and use a magnetic power connector on the car.
All the ones I found only gave portrait and I preferred to use landscape
What car charger are you using?
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
I'm looking to buy still, just got my s8+ a couple weeks ago, with the unveiling of the note8 I almost took it back
as of right now for in the car I'm using https://www.amazon.com/BESTEK-300W-Power-Inverter-Adapter/dp/B004MDXS0U/ with cables
not sure I want to have to add in something to a case to make it compatible I'd rather the case be compatible to begin with, many magnetic chargers work just fine without add ins
https://docs.google.com/drawings/d/10wBkiHyNDZF969vzCDtKLQ8TI5XLnB5wJ3GOLJJhA-8/edit?usp=sharing
basically just imagine some time on the dremel to cut out everything covering up the back as much as possible except maybe leaving a bit near the edges
if I have the ring it'll be near the power button
and the kickstand will be probably above the camera or down by the fcc text, very small chance I do it vertical by the bixby button
pair it with a belt clip, and maybe something like a folio cover under the screws if I do feel like having cards
if I can do this with existing parts and a dremel why can't one of these case makers?
I'm trying to figure out how I would do a swivel like the ring but with something as long as a kickstand for more angle options, found one custom stent on a case that could work, not sure yet if that's how I want to do it?
figured it out, answer is no kickstand, there's 3 places I legit need a kickstand and I can just get stands and put them there
apparently there isn't much of a phone case modding scene I can find.... does everyone just live with the cases they buy? can't everything be improved with some ingenuity?
My new case, ticks most of the boxes
https://www.amazon.co.uk/XOOMZ-Detachable-Blocking-Magnetic-Leather-Brown/dp/B073QJ1N8P
biotoxin said:
I've spent the better part of the week scouring for good s8+ cases that would be compatible with wireless charging and in the end I've hodge podged pieces into a frankencase
seeing as I'm probably going to make myself a case I thought I'd share the elements of what I was looking for and ask if I'm just crazy for wanting so much or if I'm not alone.
I don't need much coverage, mostly the corners and a raised edge in case it does fall but otherwise I'm not concerned with protecting the fronts and backs given how rarely I drop my phone if I've got an actual grip on it no thanks to the slippery materials they use
I'd like direct access to my buttons, many cases have their own button that pushes the actual button, I've never enjoyed this as it's usually stiff or hard to press and often hard to distinguish from the case itself
wireless compatibility is a must for me given the fact I'm not only on the road most of the day but I'm constantly in and out of the vehicle where I'm definitely not leaving my phone that I'll probably actually need, and having to work a harness gets annoying during regular use imagine 30+ times a day
this means something magnetic so it sticks in place like the airdock 2 which I have no idea if it's compatible with s8+ or not as of yet
getting back to the in and out I need a hip holster because I spend way more time texting and taking photos of job sites than talking so a headset is less important than not having to fish for my phone
lanyards are just good ideas, why is it so rare to find them let alone on a rugged case?
a kickstand doesn't have to be complicated either and doesn't need an entire phone length if you know what you're doing with it, spigeon has a nice stick on that generally gets the job done, or even those ring mounts double as kickstands and great dash magnet mounts
who puts a card holder behind the case right in the magnetic field of wireless charging? it's called a folio cover geez, even those work as kickstands in a pinch as flimsy as they are in that capacity.
granted with all the mobile payment options these days you generally don't need to worry about a card in the first place so it's coming time to uncouple those two
and on a side rant why are we still using adapters and converters for magnetic break away cables? shouldn't this be standardized by now?
I'm going to sketch up the case I'm thinking of and post back maybe you guys can tell me why it's such a ridiculous idea to have.
Click to expand...
Click to collapse