Related
I went ahead and purchased the clingo car mount
http://www.clingo.com/car-mounts/universal-hands-free-mount/
for $25 shipped off of eBay (find it yourself) after it was mentioned by a member on XDA. It looked cool to me and since I didn't enjoy my Soundgate M2 mount to much I decided to give it a try.
I must say that I am very happy with the purchase. It works flawlessly with my EVO. I have tried it with two different cased, one was a regular tpu style and then with this case http://www.amazon.com/High-Quality-...?ie=UTF8&s=electronics&qid=1281911569&sr=8-1\
I'm not sure what material its made from but it is comparable to leather.
Both cases worked perfectly. They stuck to the Clingo adhesive without any problems and most importantly, they stayed there. A naked EVO will work just as well.
I have had the mount only for a couple days, but so far I have driven relatively long distances without no issues whats-so-ever. I live in houston tx btw, it's 5:35 rite now and 97* degrees outside, just to give you an idea of my environment.
The adhesive on the clingo does not seem to be losing its stickiness at all after my first couple days. I found this on clingos website.
http://www.clingo.com/articles/technology
If those are true facts then you can expect this baby to last a while...
Installation was extremely easy. I have mine attached to my windshield and it sticks to it like a champ. There is an optional attachment that allows you to stick it to your car dash board which works very well also.
overall I HIGHLY recommend this product if your looking for a decent car mount and in all honestly if I was to buy a home dock for the EVO I would get another clingo. It's so simple yet practical.
I know with all these knew docks coming out from htc/sprint/eBay/wireforless nobody really considered getting a Clingo product, but you can find them for relatively cheap off of eBay and it seems like it would look nice in an office/home environment. talking about this btw http://www.clingo.com/home-and-office/universal-podium
this seems pretty neat also, might scoop it up once I get some extra cash.
http://www.clingo.com/home-and-office/parabolic-sound-sphere
I dont see a need to spend 50+ on a dock just because it charges your phone. You can get a couple spare batteries, a car charger, home charger, usb cable and screen protectors for under 20 off of eBay. That matched with a Clingo product is all I need.
P.S - I suck at writing reviews. This is just my attempt to help some fellow xda members make a decision on an accessory for there phone. If your coming here to hate on my grammar and the way I type (which i have seen A LOT of lately on XDA. Must be the summer heat or something) then troll on my friend.
Oh yeah! and if you guys want a video of the mount just let me know. Only problem is my EVO is my video recorder, but I can still go ahead and try it if ya'll want.
Thanks for the review! I was actually just on their website before I came across your post. (Its actually still open in another window lol.) Can you comment on the amount of weight it can support based on its area? I know some of the pads for the phone were pretty big, but other were smaller circles. Do you think the smaller ones would be able to support our Evos?
"It’s pretty simple, really. Clingo holds your phone. It doesn’t matter if it is a BlackBerry, iPhone, Droid, Samsung, or whatever. Whether in your car, at the office, at home, or wherever - Clingo holds it."
That's a statement from the clingo website. That is for all there products except for the little necklaces which are designed specifically for iPod nanos. So according to them any of there products should be able to support any mobile device, including our EVOs.
From my experience, which is still limited, it really doesn't seem like too much surface area is necessary to grip the phone. Also, all the "Universal Products" seem to have the same surface area and shape. They only have two products that I can see with smaller surface area. One is the nano necklace and the other is the parabolic sounds sphere....
However, I remember somebody posting something about there evos slipping a little bit while using the clingo car mount and an innocase. Not sure how accurate that is though.
starplaya93 said:
However, I remember somebody posting something about there evos slipping a little bit while using the clingo car mount and an innocase. Not sure how accurate that is though.
Click to expand...
Click to collapse
He stated the arm came down a bit, the phone itself stayed put on the holder, but the entire assembly (ball joint) rotated down a bit.
ahh...well in his case all he had to do was adjust the knob and tighten it, which is easily done.
Thanks for clarifying that.
starplaya93 said:
ahh...well in his case all he had to do was adjust the knob and tighten it, which is easily done.
Thanks for clarifying that.
Click to expand...
Click to collapse
I believe you guys are referring to my post here: http://forum.xda-developers.com/showpost.php?p=7667216&postcount=22
When using the mount with my Evo and Innocase Active Limited Edition, problems arose between the pad and the ball joint at the end of the arm (where you can adjust the pads' viewing angle). The arm wasn't moving at all since it was as tight as I could get it to be. While driving, the added weight of the case was causing the pad to move downward. It felt like it was much easier to move the pad around the ball joint when the case was in use. I tried every which way to get the phone to sit still but it continuously moved down, to the point where I couldn't view the screen very well at all.
It doesn't really bother me, though, since the mount works perfectly on a naked Evo. Once I removed the case, the pad was not moving whatsoever and the connection between it and the jointed ball seemed much stiffer.
I just ordered the parabolic sound sphere... gonna play around with that before i pull the trigger on a car mount
hx3 said:
I believe you guys are referring to my post here: http://forum.xda-developers.com/showpost.php?p=7667216&postcount=22
When using the mount with my Evo and Innocase Active Limited Edition, problems arose between the pad and the ball joint at the end of the arm (where you can adjust the pads' viewing angle). The arm wasn't moving at all since it was as tight as I could get it to be. While driving, the added weight of the case was causing the pad to move downward. It felt like it was much easier to move the pad around the ball joint when the case was in use. I tried every which way to get the phone to sit still but it continuously moved down, to the point where I couldn't view the screen very well at all.
It doesn't really bother me, though, since the mount works perfectly on a naked Evo. Once I removed the case, the pad was not moving whatsoever and the connection between it and the jointed ball seemed much stiffer.
Click to expand...
Click to collapse
ohh, ok...maybe the innocase just adds a little to much weight for it to manage.... Have you tried cleaning the Clingo and trying it again?
dmc971989 said:
I just ordered the parabolic sound sphere... gonna play around with that before i pull the trigger on a car mount
Click to expand...
Click to collapse
Let me know how that goes. I'm considering buying it, but I want to know if it actually amplifies sound at all be I go for it.
starplaya93 said:
ohh, ok...maybe the innocase just adds a little to much weight for it to manage.... Have you tried cleaning the Clingo and trying it again?
Click to expand...
Click to collapse
Yeah, several times. My problem isn't with the stickiness from the green area of the pad, it's with the back where it connects to the ball joint. With or without the case, the phone doesn't slide or fall off the sticky part of the pad at all. But when I use the case, the pads' construction moves down as if it's sliding from the ball joint due to too much weight.
Kind of hard to explain clearly. The phone sticks to the pad perfectly in any scenario, though. I just think the Evo + Innocase Active is too heavy for this mount unless some slight modding is done. Nevertheless, I'm content with using the phone with no case when used with the mount. Works just fine then.
starplaya93 said:
Let me know how that goes. I'm considering buying it, but I want to know if it actually amplifies sound at all be I go for it.
Click to expand...
Click to collapse
Oh I have absolutely no doubt that it will amplify sound, im just not sure how much louder it will make things... or if its going to have any strange/****ty frequency response
hx3 said:
Yeah, several times. My problem isn't with the stickiness from the green area of the pad, it's with the back where it connects to the ball joint. With or without the case, the phone doesn't slide or fall off the sticky part of the pad at all. But when I use the case, the pads' construction moves down as if it's sliding from the ball joint due to too much weight.
Kind of hard to explain clearly. The phone sticks to the pad perfectly in any scenario, though. I just think the Evo + Innocase Active is too heavy for this mount unless some slight modding is done. Nevertheless, I'm content with using the phone with no case when used with the mount. Works just fine then.
Click to expand...
Click to collapse
In other words it goes from this | to this /
Take a black zip tie, wrap it around the back where the ball goes into the socket and cinch it down some, may be just what you need to add that bit of extra grip.
Great review.. I have the car dock, the tethering pad and the sound sphere on the way.. should be here today.
Well, all my stuff showed up. The parabolic sphere is pretty cool. It does increase the volume somewhat and maybe add a little reverb to the noise. The tethering pad is okay as well.
The car dock, however, sucks. It would probably be great on a lighter phone. So far my Evo has fallen off 3 times and seems to slide around on the pad. Pretty disappointing.. looks like my quest for a good car dock will continue.
Well, Ive done everything I could do to make the car mount work and it just wont. The design is poor and it reflects in the performance of the dock. My dock will not stay where I put it, instead sagging down and eventually dropping the phone. Ive tried everything short of wire tieing it in place (Yay for ghetto engineering) and I cant make it stay. Ive tried zip tie around the neck of the mount, stuffing tape into the ball and socket, etc.. nothing helps. Guess this one is going to end up in the trash pile too along with every other Evo mount Ive bought.
If you'd point out the failing was in the positioning of the mount, and not the mount's ability to hold the phone on its sticky pad, you might have a good chance of selling it here for not much less than you paid for it.
VW91N3 said:
If you'd point out the failing was in the positioning of the mount, and not the mount's ability to hold the phone on its sticky pad, you might have a good chance of selling it here for not much less than you paid for it.
Click to expand...
Click to collapse
Well, its not just that. The Evo IMO doesnt stick to the pad very well. Maybe its the oil from my hands but I had to put a plastic case on the phone just to get it to stick. For a Nexus one or something, it probably would be great. The Evo is just too much of a beast for this mount.
On a side note, I emailed Clingo about calling me regarding this mount. Its been 2 days and no call back. Another strike against Clingo.
The rattle and shake of my universal gooseneck holder has been driving me crazy since day one, and I've been looking for another option. After watching the clingo demo video with the guy flying over speed bumps I decided to give it a try.
I've been using it in my car for a week now, and am very happy with it. Right out of the box it held my EVO (in the innocase active) no matter how hard I shook it. The grip of the pad is amazing.
As others reported, the size/weight of the EVO caused it to droop forward. If I turned the pad sideways it stayed up better, but a small black zip tie around the socket completely fixed the drooping. I figure putting a small piece of rubber band into the socket should also do the trick while still allowing repositioning.
The result has been stunning. Even over big potholes and grooved highway pavement the clingo has kept my phone still. It is soooo much easier to read without the phone shaking.
Now to see how the cling pad holds up to new england winter.
JAson
bhtoque said:
The rattle and shake of my universal gooseneck holder has been driving me crazy since day one, and I've been looking for another option. After watching the clingo demo video with the guy flying over speed bumps I decided to give it a try.
I've been using it in my car for a week now, and am very happy with it. Right out of the box it held my EVO (in the innocase active) no matter how hard I shook it. The grip of the pad is amazing.
As others reported, the size/weight of the EVO caused it to droop forward. If I turned the pad sideways it stayed up better, but a small black zip tie around the socket completely fixed the drooping. I figure putting a small piece of rubber band into the socket should also do the trick while still allowing repositioning.
The result has been stunning. Even over big potholes and grooved highway pavement the clingo has kept my phone still. It is soooo much easier to read without the phone shaking.
Now to see how the cling pad holds up to new england winter.
JAson
Click to expand...
Click to collapse
great to here its worked out well for you. I've had mine for a while and am still loving it, however, i'd like to try out the rubberband trick that you are speaking of... What exactly did you do? How big was the rubber band?
Mines has held up to texas weather 100+ with my car out in the heat, so hopefully it can handle the cold also.
starplaya93 said:
great to here its worked out well for you. I've had mine for a while and am still loving it, however, i'd like to try out the rubberband trick that you are speaking of... What exactly did you do? How big was the rubber band?
Mines has held up to texas weather 100+ with my car out in the heat, so hopefully it can handle the cold also.
Click to expand...
Click to collapse
I have not used the rubber band trick on my Clingo, as the zip tie stopped the droop, but I've done it with similar ball joints. You should be able to find a small bag of rubber bands at your local office supply big box. One about 1/4" wide should do with the clingo. Just cut a piece out of the band and put it into the socket as close to on-center as you can. Line up the ball on the clingo's arm so that the mount pad will be close to the angle you want it, and snap the pieces back together. The rubber will provide grip, and provide enough to stop any drooping while still allowing you to reposition and swivel the mount head.
JAson
Has anybody tried the tetrax mounts yet with their galaxy nexus? Before I purchase one I'm curious of two things.
1. How well does the the magnet stick to the battery door since the battery cover is textured? I have an extra cover that I'll use simply for this.
2. Does the magnet interfere with the NFC and/or screen at all?
In case your not sure what I'm referring to:
http://store.tetrax.us/xway-line/fixway
I have used this on other phones, including my G2, MyTouch 3G and G1 and it worked very well on all those phones. However, due to the textured back on the Galaxy Nexus, the metal button that stick to the battery door does not stay on. I have tried replacing the double sided tape with stronger automotive 3M tape, but that doesn't work either. It'll stay on for a little while and come back off. The only solution would be to find a battery door that is smooth.
I can't answer if it interferes with NFC or the screen, but it shouldn’t. If anything, it might interfere with the magnet on the compass, but that has not been the case with my other phones.
MetalMessiah78 said:
I have used this on other phones, including my G2, MyTouch 3G and G1 and it worked very well on all those phones. However, due to the textured back on the Galaxy Nexus, the metal button that stick to the battery door does not stay on. I have tried replacing the double sided tape with stronger automotive 3M tape, but that doesn't work either. It'll stay on for a little while and come back off. The only solution would be to find a battery door that is smooth.
I can't answer if it interferes with NFC or the screen, but it shouldn’t. If anything, it might interfere with the magnet on the compass, but that has not been the case with my other phones.
Click to expand...
Click to collapse
Thanks,
So you've actually tried it on the GNex and it don't stick very well? Did you by chance try holding it on there for several hours with a strong clamp or anything? I really want one of these but worried it's a waste of money with this phone
I have actually tried it, but not with a clamp. Just following the regular directions. On my other phones, it created a very strong bond and it takes a lot of effort to remove. With the Nexus, it stays on the first couple of times you mount it, but that's about it. It's not an issue with the weight, as the G2 feels twice as heavy as the Nexus, especially with an extra capacity battery. It's the texture on the battery door. It almost feels like it has a Teflon coating.
MetalMessiah78 said:
I have actually tried it, but not with a clamp. Just following the regular directions. On my other phones, it created a very strong bond and it takes a lot of effort to remove. With the Nexus, it stays on the first couple of times you mount it, but that's about it. It's not an issue with the weight, as the G2 feels twice as heavy as the Nexus, especially with an extra capacity battery. It's the texture on the battery door. It almost feels like it has a Teflon coating.
Click to expand...
Click to collapse
Would you mind holding up one of the magnets to the battery door and test out the NFC to see if it interferes with it (if you have the ability to). This is my main question as I could always put the magnet on a case I guess.
Thanks!
I don't have another NFC device to try it right now, but my brother has the Nexus S and I can try it when I see him later tonight. The magnet doesn't go on the battery door though. What you stick on the battery door is just a piece of metal. The actual magnet is on the device that you mount to your dash or vent, so unless you plan on using NFC while it's on your dash, it should not interfere.
Plus, NFC uses low power radio frequency to transfer information (similar to Bluetooth). It does not use magnets. The only thing in the phone that could be affected would be the compass, as it finds your relation to magnetic North. Even then, I'm sure the compass works through software and is not an actual magnet, as it has never affected GPS. As a matter of fact, I have 2 Tetrax products, the one that mounts to the dash, which I have in my car, and the one that you attach to the vent for when I use a rental on trips for the sole purpose of Navigation. As you can imagine, I was very disappointed when I could not get the metal button to stick. I might have to try it with a case also.
MetalMessiah78 said:
I don't have another NFC device to try it right now, but my brother has the Nexus S and I can try it when I see him later tonight. The magnet doesn't go on the battery door though. What you stick on the battery door is just a piece of metal. The actual magnet is on the device that you mount to your dash or vent, so unless you plan on using NFC while it's on your dash, it should not interfere.
Plus, NFC uses low power radio frequency to transfer information (similar to Bluetooth). It does not use magnets. The only thing in the phone that could be affected would be the compass, as it finds your relation to magnetic North. Even then, I'm sure the compass works through software and is not an actual magnet, as it has never affected GPS. As a matter of fact, I have 2 Tetrax products, the one that mounts to the dash, which I have in my car, and the one that you attach to the vent for when I use a rental on trips for the sole purpose of Navigation. As you can imagine, I was very disappointed when I could not get the metal button to stick. I might have to try it with a case also.
Click to expand...
Click to collapse
Awesome so yea I don't think it'll interfere because I was thinking the part you stick to the back of the phone is magnetic, but if your saying it's not all should be well. Either way I went ahead and ordered it yesterday anyway so I'll figure out a way to get it to stick to either the door or a case. Thanks for your insight!
Nope, it's just a metal button. It actually comes with 4 or 5 different ones of all sizes and styles.
I have this installed on my nexus, I put the mount on my dash and the NFC sticker on my knob for the ac that get covered up. Everytime I put my phone on the mount, the nfc changes it to car mode, volume up, full brightness and launches sirius xm radio...works very well, sometimes I have to move it a bit to get to read the nfc, but thats only cause i have the nfc a little too far at the bottom of the phone and it mounts at a slight angle, not due to any interference at all. I have NFC chips all around and never have problems reading them at all, probably a good idea not to mount the metal chip right in the middle of the battery area, just in case. I also used a clamp to hold it on for about 3 or 4 hours and has had little trouble sticking to the texture.
I have had a few incidents if I pull off the phone, rather than slide it off the backing will actually unclip a single clip.
@ejkeebler what do you mean by NFC stickers all around? Did you make stickers to automatically change your settings on your phone? That's brilliant! How did you do it?
I might also have to try a clamp. I don't really want to put a case on my phone.
MetalMessiah78 said:
@ejkeebler what do you mean by NFC stickers all around? Did you make stickers to automatically change your settings on your phone? That's brilliant! How did you do it?
I might also have to try a clamp. I don't really want to put a case on my phone.
Click to expand...
Click to collapse
I also have NFC stickers everywhere. have them when I walk in the front door of my house, one in my office at work, one in each vehicle, one in my wallet LOL. They are awesome. Set them to change settings or do tasker tasks and you can rewrite over them if you ever want to change anything. One of the best phone features I've ever used. That's why i was concerned about the magnets interfering with the NFC!
dcoy82 said:
I also have NFC stickers everywhere. have them when I walk in the front door of my house, one in my office at work, one in each vehicle, one in my wallet LOL. They are awesome. Set them to change settings or do tasker tasks and you can rewrite over them if you ever want to change anything. One of the best phone features I've ever used. That's why i was concerned about the magnets interfering with the NFC!
Click to expand...
Click to collapse
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
raing said:
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
Click to expand...
Click to collapse
A quick search came up with this: http://www.tagstand.com/
Seems like this could open up a whole line of fun options. Would love to hear how others have done it, though.
raing said:
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
Click to expand...
Click to collapse
www.tagstand.com to purchase the tags. Tell him DCoy82 sent you! The 30mm ultralight c circle NDEF formatted seem to be the only ones I've bought that work with the nexus so far.
Once you get them you can download program called NFC Task Launcher off the market to program them.
Sent from my A500 using Tapatalk
dcoy82 said:
www.tagstand.com to purchase the tags. Tell him DCoy82 sent you! The 30mm ultralight c circle NDEF formatted seem to be the only ones I've bought that work with the nexus so far.
Once you get them you can download program called NFC Task Launcher off the market to program them.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
That is so awesome. This is my first phone with NFC so I'm barely starting to learn all the cool things that you can do with it. I tried Android Beam for the first time with my brother on Tuesday and it works great, though I wish you could beam other things such as pictures. By the way, the metal button does not interfere with NFC. I will let them know that you recommended me. Thank you!
If your interested in NFC, here's a few spots that got me started
http://androidforums.com/nexus-s/336155-what-do-you-use-nfc-tasker.html
http://www.readwriteweb.com/archives/weekend_project_make_your_own_nfc_tags.php
http://www.youtube.com/watch?v=LnqmyNEQPq0&feature=email&email=comment_reply_received
and the tags I bought were from here:
http://tagsfordroid.com/tags/Home.html
I got them cause i liked the having the android on them, i think they are a tiny bit less expensive elsewhere, and these are a little thicker than I'd like (like a puffy sticker, about the same thickness of a penny) but you can get many in other places.
by itself i'm not sure nfc task launcher does it for me, but in combination with tasker, it's ridiculous how much can be done....would still love to see what others have come up with.
I love those stickers with the Android! Thanks for the links. I will need to read up on it more. I am definitely interested. This is a lot more exciting stuff then what Google showed off at the I/O last year!
Thats a good idea. Being in IT, we have dead Hard Drives laying around that have awesome magnets in them. They're real slim. I bet I could superglue one to my nexus's battery cover for under the TPU case that would hold. They're thin so it might not screw with the case (but it might).
ejkeebler said:
I got them cause i liked the having the android on them, i think they are a tiny bit less expensive elsewhere, and these are a little thicker than I'd like (like a puffy sticker, about the same thickness of a penny) but you can get many in other places.
Click to expand...
Click to collapse
Yeah, it looks like it's $8 for 2. I just picked up 5 over at tagstand.com for the same price and found 10 for $13 over at http://buynfcstickers.com.
Hopefully you guys are all having good experience with the guy at tag stand. His customer service was great for me and I'll definatley be going back there in the future.
Oh and by the way, I got my new tetrax magnet set in today and not having any issues with the magnet at allowing necessary nor with the metal part sticking to the stock battery door. Only real issue so far is you have to slide it off just right or the battery door just pops off the nexus lol. Highly recommend though!
Sent from my A500 using Tapatalk
Hi, I was wondering if anybody knows if there are any docks that work with the draco bumper. I'm only asking because the draco bumper seems to be quite large. I've had to buy 3 different aux cords because they wouldn't fit, and I don't want to waste time trying out different docks.
You could always consider buying a 'universal dock' that clamps to the sides of the phone and then plug the phone in with a normal cable. It's not really a dock per say but it'll definitely do the job of holding your phone upright/horizontal.
If you need a link to one just let me know.
Aegishua said:
You could always consider buying a 'universal dock' that clamps to the sides of the phone and then plug the phone in with a normal cable. It's not really a dock per say but it'll definitely do the job of holding your phone upright/horizontal.
If you need a link to one just let me know.
Click to expand...
Click to collapse
Would you happen to know a car mount that would let me fit a S3 with the draco bumper and still let me use my camera while in place?
rlatjs17 said:
Would you happen to know a car mount that would let me fit a S3 with the draco bumper and still let me use my camera while in place?
Click to expand...
Click to collapse
http://www.amazon.com/gp/product/B008KP4ZFI/ref=oh_details_o02_s01_i00
I have been using that for a while. all my devices and my GF's devices have a the metal plate installed (and most, like the s3) have it under the battery door, so you cannot see it) and I have one for the car, and one for work. anywhere i go, with whatever i take, i can mount without looking. I also ziptied a cable to it, and am running a tasker script to start car mode (triggered by bluetooth to my alpine ex-10)
and yes, you can easily use the camera with it.
scarrmrcc said:
http://www.amazon.com/gp/product/B008KP4ZFI/ref=oh_details_o02_s01_i00
I have been using that for a while. all my devices and my GF's devices have a the metal plate installed (and most, like the s3) have it under the battery door, so you cannot see it) and I have one for the car, and one for work. anywhere i go, with whatever i take, i can mount without looking. I also ziptied a cable to it, and am running a tasker script to start car mode (triggered by bluetooth to my alpine ex-10)
and yes, you can easily use the camera with it.
Click to expand...
Click to collapse
Would this cancel NFC and if its a metal plate do you lose any reception? And how sturdy is it? I wouldn't want it falling off because of a few big bumps on the road, and I thought strong magnets aren't good for our phones.
rlatjs17 said:
Would this cancel NFC and if its a metal plate do you lose any reception? And how sturdy is it? I wouldn't want it falling off because of a few big bumps on the road, and I thought strong magnets aren't good for our phones.
Click to expand...
Click to collapse
I do not have a way to check the NFC cancelling...
there is no reception loss, as it is is as large the battery only, and the antenna is up top, away from the plate.
big bumps?
i live in central PA, and drive a car lowered on coilover suspension (and turned pretty tight too) and the phone has not budged an inch. perhaps i should do a review.. with the camera running during an autocorss and going over nasty bumps.
magnets mess up harddrives.. not phones.
I'm after a car holder for my HTC One whereby I don't have to take the phone out of the case as it's annoying and I'd like something quick and easy to use.
I've bought a few from Amazon for my HTC One X but they were rubbish, flimsy or just didn't stick to the windscreen.
So I'm after some personal experiences too, has anyone bought a car holder for their One that you don't have to take it out of the case to use and does it work well?
Somewhere I can buy it from in the UK
Something like this I bought for my HOX but it just didn't work very well. Might give it a go since it's only £2.
My friends in the UK use this: http://www.amazon.co.uk/Mountek-nGr...e=UTF8&qid=1372679295&sr=8-1&keywords=Mountek
I just ordered one this morning and am expecting to receive it in a week to ten days since I am in Egypt. My friends have had it for a long time now and they tell me that it's amazing and the quality is extremely durable to this day.
Some of them also use a combination of two items: this and this. The first one has a sticky pad which is very, very strong and just doesn't fade, they tell me it's as strong as the day they bought it and they use the second item sometimes, basically they attach it to the sticky pad and use it as an actual car mount.
The second suggestion isn't the most practical but it works well and is fairly cheap, however the Mountek one is just perfect; not only did I read good reviews about it and was it recommended by friends, but I also watched videos and I find it great.
http://www.youtube.com/watch?v=kG3A4uq1ItQ
I can highly recommend this one…
http://www.mobilefun.co.uk/supergrip-universal-case-compatible-car-mount-p30552.htm
It will hold just about any phone in either portrait or landscape. Its suction pad even sticks to mottled, textured dashboard surfaces. Naturally it holds to glass like a limpet. Beware of the cheaper Amazon look-a-likes that have an inferior sucker.
It is very quick to attach and remove your phone, and doesn’t smother the phone’s back so the phone still gets air cooling (mine gets very hot charging and using sat nav). I think it looks ok too.
Thanks both, much appreciated. I'll check both of these out.
@wnp_79 - What's the pressure like on your car holder, in respect to it looks like it's spring loaded so I'm worried that it might put too much pressure on the sides of the phone, if that makes sense?
gibbs1984 said:
Thanks both, much appreciated. I'll check both of these out.
@wnp_79 - What's the pressure like on your car holder, in respect to it looks like it's spring loaded so I'm worried that it might put too much pressure on the sides of the phone, if that makes sense?
Click to expand...
Click to collapse
It is spring loaded, but does not hold the phone with any more pressure than you would use holding it yourself. The only issue I've had is with certain cases (like the Otterbox Commuter) which have protruding volume buttons. The grip is enough to accidentally activate these if you are not careful where you place the phone. With flush buttons or ensuring the grip misses them there's no issues.
wnp_79 said:
It is spring loaded, but does not hold the phone with any more pressure than you would use holding it yourself. The only issue I've had is with certain cases (like the Otterbox Commuter) which have protruding volume buttons. The grip is enough to accidentally activate these if you are not careful where you place the phone. With flush buttons or ensuring the grip misses them there's no issues.
Click to expand...
Click to collapse
Thanks, I'll add it to the possible list and I'll do some more research before pay day.
Appreciate the feedback
wnp_79 said:
I can highly recommend this one…
http://www.mobilefun.co.uk/supergrip-universal-case-compatible-car-mount-p30552.htm
It will hold just about any phone in either portrait or landscape. Its suction pad even sticks to mottled, textured dashboard surfaces. Naturally it holds to glass like a limpet. Beware of the cheaper Amazon look-a-likes that have an inferior sucker.
It is very quick to attach and remove your phone, and doesn’t smother the phone’s back so the phone still gets air cooling (mine gets very hot charging and using sat nav). I think it looks ok too.
Click to expand...
Click to collapse
Yes this one works wonderfully. I thought it a little to simple at first... But simple wins here. It'll even work with future phones. You can install and remove phone one handed and of course cases work. Only bad thing is no dedicated charging... But i got over that quick.
Kenu airframe. For me it's the best.
Sent from my HTC One using Tapatalk 4 Beta
I've been looking for the same thing. Thanks for the recommendations, I will report back once I pick one up!
I'm getting a free Galaxy Tab 3 as a promotion from Time Warner Cable (which I assume is the 7" version based on the statement on their website that says "$199 value") and thought it would be kind of cool to use it for recipes. The idea is that I would use Pepperplate, and use Smart App Protector to keep the screen on while Pepperplate is open. The part I haven't decide on is where to put it. At this point, the most practical thing seems to be to get a case that has strong magnets fastened to the back, which could remain on the tablet at all times, and when I want to use it to cook with I could just slap it on the fridge. But I haven't been able to find any cases that seem to fit this need. Does anyone have any suggestions for this? Or suggestions for a case that may be ideal to Gorilla Glue some neodymium magnets too?
The under-the-counter mounts don't seem to be a good solution because I would like this to be portable when it needs to be. Also, I'd love to hear if anyone has any suggestions on how to implement some method of charging while it's on the fridge, though this is not too important to me and is more of a curiosity than anything else. I was thinking perhaps if the tablet is capable of wireless charging, having magnets around the edge and a wireless charging base on the fridge that would go in the center, then trying to find a way to run the cord along the edge of the fridge door. And if it has NFC (which unfortunately it looks like it may not) perhaps I could have a tag on the fridge that would trigger Pepperplate to launch.
This is all just for fun, but it would be really neat to have some sort of set up where I could just slap the tablet on the fridge and have it do its thing. The biggest priority is finding a case that would be magnetic or easily modified to be magnetic. Any input is welcome. Thanks!
Super Sam Galaxy said:
I'm getting a free Galaxy Tab 3 as a promotion from Time Warner Cable (which I assume is the 7" version based on the statement on their website that says "$199 value") and thought it would be kind of cool to use it for recipes. The idea is that I would use Pepperplate, and use Smart App Protector to keep the screen on while Pepperplate is open. The part I haven't decide on is where to put it. At this point, the most practical thing seems to be to get a case that has strong magnets fastened to the back, which could remain on the tablet at all times, and when I want to use it to cook with I could just slap it on the fridge. But I haven't been able to find any cases that seem to fit this need. Does anyone have any suggestions for this? Or suggestions for a case that may be ideal to Gorilla Glue some neodymium magnets too?
The under-the-counter mounts don't seem to be a good solution because I would like this to be portable when it needs to be. Also, I'd love to hear if anyone has any suggestions on how to implement some method of charging while it's on the fridge, though this is not too important to me and is more of a curiosity than anything else. I was thinking perhaps if the tablet is capable of wireless charging, having magnets around the edge and a wireless charging base on the fridge that would go in the center, then trying to find a way to run the cord along the edge of the fridge door. And if it has NFC (which unfortunately it looks like it may not) perhaps I could have a tag on the fridge that would trigger Pepperplate to launch.
This is all just for fun, but it would be really neat to have some sort of set up where I could just slap the tablet on the fridge and have it do its thing. The biggest priority is finding a case that would be magnetic or easily modified to be magnetic. Any input is welcome. Thanks!
Click to expand...
Click to collapse
here's how I would do it...
Get yourself a (or 2) cheap TPU cases. I have one called BoxWave. 5-6 bucks.... Ebay or Amazon
A semi flexible stiff rubber (TPU) case that the Tab gets fitted into..just like the supersoft silicone cases, but the TPU material is alot stiffer, but still flexible enough to get it on and off your tab easily..
then get peel and stick magnet strips for any hardware store..Home Depot, Lowes, Walmart, True Value, Ace... wherever
Stick the magnets to the TPU case and let them set up for 24 hours before putting the Tab in it and putting weight on it..
if youre scared..
Gorrilia glue will work too.. remember.. it's just a cheap case and worth the sacrifice..
Then there ya go!! slip the Tab into the case and stick the Tab on the Fridge!!!
Good luck and be sure to post Pictures of your success!!
jimmbomb said:
here's how I would do it...
Get yourself a (or 2) cheap TPU cases. I have one called BoxWave. 5-6 bucks.... Ebay or Amazon
A semi flexible stiff rubber (TPU) case that the Tab gets fitted into..just like the supersoft silicone cases, but the TPU material is alot stiffer, but still flexible enough to get it on and off your tab easily..
then get peel and stick magnet strips for any hardware store..Home Depot, Lowes, Walmart, True Value, Ace... wherever
Stick the magnets to the TPU case and let them set up for 24 hours before putting the Tab in it and putting weight on it..
if youre scared..
Gorrilia glue will work too.. remember.. it's just a cheap case and worth the sacrifice..
Then there ya go!! slip the Tab into the case and stick the Tab on the Fridge!!!
Good luck and be sure to post Pictures of your success!!
Click to expand...
Click to collapse
That sounds like a fantastic way to do it. I was very uneasy about magnets because of two things: the first is that I was afraid they would separate and the other is that I thought I'd need magnets so strong they may damage the tablet. Gorilla gluing them to a case is perfect because it's strong, doesn't damage the tablet, and doesn't require ridiculously strong magnets like I'd need if I had something like a metal plate inside the tablet that the magnets would need to stick to. I wish I'd seen this post a few days ago, because as it turns out I have already started another plan, which I've already ordered the parts for, but I'm strongly considering cancelling my order to give your method a try. The one thing that makes me hesitate is that with the new plan, I've come up with a way to hide the cord, whereas I was unable to think of a way to do this when it's on the fridge.
Here's what I put together: I have a cabinet directly on the left of my stove (as opposed to the fridge which is directly to the right of it). The cabinet starts about a foot and a half off the ground and comes up to about my neck. The idea is to mount it on the cabinet door and hide the cord in the cabinet, and the specifics are as follows. There's no power source inside the cabinet, so I was going to drill an extension cord sized hole in the back base of the cabinet to slip an extension cord into. Then I'd drill another (smaller) hole in the door for the micro USB end of the charging cable. Next, I'd put the power cable together, and it consists of 3 parts. The extension cord, a USB-to-power adapter, and a micro USB to USB flat cable that I've orderd. I ordered a flat one so it can go behind the tablet without being very visible. So once I have cleared a path for the cord and put it together, I'll run the cord from the wall to the hole in the door, and staple it along the edges everywhere in between so it's not in the way. Finally, I'll mount a TPU case on the top part of the door by drilling holes and screwing it in, securing it with hex fasteners on the other side of the door. I've included a simple MS Paint rough draft of what the finished product will look like.
The idea is that it will be mounted on the door, the cords won't be visible, and it will always be connected to a power source (unless I remove it temporarily). I'm not too worried about frying the battery since there are not many instances that would require me to remove it from power so as to rely on the battery. I hate to be so OCD but visible cords are a bit of a bother to me. However, if you have any ideas as to how I may hide them with the method you mentioned I'd be happy to hear them since your method sounds far easier and less destructive, and probably an all around better option if it weren't for those pesky cords! Also, since my tablet hasn't arrived yet I can't check this for myself: (if you have the same tablet) does the Galaxy Tab 3 7.0 have NFC capabilities? I couldn't find anything saying it did, but I couldn't find anything saying it didn't either. If so, I'd put an NFC sticker on the inside of the case and create a set of tasks in Tasker so that when I put it in its home it goes into "Kitchen Mode". Anyway, thanks for all your help and suggestions, and whatever I end up doing I will definitely post a few pics to show it off!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Super Sam Galaxy said:
That sounds like a fantastic way to do it. I was very uneasy about magnets because of two things: the first is that I was afraid they would separate and the other is that I thought I'd need magnets so strong they may damage the tablet. Gorilla gluing them to a case is perfect because it's strong, doesn't damage the tablet, and doesn't require ridiculously strong magnets like I'd need if I had something like a metal plate inside the tablet that the magnets would need to stick to. I wish I'd seen this post a few days ago, because as it turns out I have already started another plan, which I've already ordered the parts for, but I'm strongly considering cancelling my order to give your method a try. The one thing that makes me hesitate is that with the new plan, I've come up with a way to hide the cord, whereas I was unable to think of a way to do this when it's on the fridge.
Here's what I put together: I have a cabinet directly on the left of my stove (as opposed to the fridge which is directly to the right of it). The cabinet starts about a foot and a half off the ground and comes up to about my neck. The idea is to mount it on the cabinet door and hide the cord in the cabinet, and the specifics are as follows. There's no power source inside the cabinet, so I was going to drill an extension cord sized hole in the back base of the cabinet to slip an extension cord into. Then I'd drill another (smaller) hole in the door for the micro USB end of the charging cable. Next, I'd put the power cable together, and it consists of 3 parts. The extension cord, a USB-to-power adapter, and a micro USB to USB flat cable that I've orderd. I ordered a flat one so it can go behind the tablet without being very visible. So once I have cleared a path for the cord and put it together, I'll run the cord from the wall to the hole in the door, and staple it along the edges everywhere in between so it's not in the way. Finally, I'll mount a TPU case on the top part of the door by drilling holes and screwing it in, securing it with hex fasteners on the other side of the door. I've included a simple MS Paint rough draft of what the finished product will look like.
The idea is that it will be mounted on the door, the cords won't be visible, and it will always be connected to a power source (unless I remove it temporarily). I'm not too worried about frying the battery since there are not many instances that would require me to remove it from power so as to rely on the battery. I hate to be so OCD but visible cords are a bit of a bother to me. However, if you have any ideas as to how I may hide them with the method you mentioned I'd be happy to hear them since your method sounds far easier and less destructive, and probably an all around better option if it weren't for those pesky cords! Also, since my tablet hasn't arrived yet I can't check this for myself: (if you have the same tablet) does the Galaxy Tab 3 7.0 have NFC capabilities? I couldn't find anything saying it did, but I couldn't find anything saying it didn't either. If so, I'd put an NFC sticker on the inside of the case and create a set of tasks in Tasker so that when I put it in its home it goes into "Kitchen Mode". Anyway, thanks for all your help and suggestions, and whatever I end up doing I will definitely post a few pics to show it off!
Yes.. I can see that fastening a tpu case to the cabinet door would work out good... and hiding your cord is a neet way too... too bad that your cabinet door will have to have a huge hole it it behind the Tab...
Maybe mount the TPU closer to the edge and run the Micro USB out of the tab, and a U-turn BEHIND the cabinet door instead of thru it.. your tab will be off center from the cabinet door... but and now remember... it's stuck there. when you pull your tab out.. you'll have an empty TPU case with 4 screws hanging on your cabinet door.
Ive seen stick on magnet strips here about 1"X4".. peel and stick.... I think 4 of those on a TPU case... perfect.. cause you can snatch it off the fridge anytime. carry it away.. stick it to the stove hood..... anywhere.... screwing to a door is semi permanant.. .. Ill go so far as to suggest 2 TPU's... one magnets on the back.. and 1 screwed to the cabinet door.
Subscribe to this thread and it will notify you of replies immediately....
good luck.. keep the ideas comming...
by the way... I thought we were talking about the 8 inch tab3 not the 7,,,,, my bad... I have an 8 incher
Click to expand...
Click to collapse
jimmbomb said:
Super Sam Galaxy said:
That sounds like a fantastic way to do it. I was very uneasy about magnets because of two things: the first is that I was afraid they would separate and the other is that I thought I'd need magnets so strong they may damage the tablet. Gorilla gluing them to a case is perfect because it's strong, doesn't damage the tablet, and doesn't require ridiculously strong magnets like I'd need if I had something like a metal plate inside the tablet that the magnets would need to stick to. I wish I'd seen this post a few days ago, because as it turns out I have already started another plan, which I've already ordered the parts for, but I'm strongly considering cancelling my order to give your method a try. The one thing that makes me hesitate is that with the new plan, I've come up with a way to hide the cord, whereas I was unable to think of a way to do this when it's on the fridge.
Here's what I put together: I have a cabinet directly on the left of my stove (as opposed to the fridge which is directly to the right of it). The cabinet starts about a foot and a half off the ground and comes up to about my neck. The idea is to mount it on the cabinet door and hide the cord in the cabinet, and the specifics are as follows. There's no power source inside the cabinet, so I was going to drill an extension cord sized hole in the back base of the cabinet to slip an extension cord into. Then I'd drill another (smaller) hole in the door for the micro USB end of the charging cable. Next, I'd put the power cable together, and it consists of 3 parts. The extension cord, a USB-to-power adapter, and a micro USB to USB flat cable that I've orderd. I ordered a flat one so it can go behind the tablet without being very visible. So once I have cleared a path for the cord and put it together, I'll run the cord from the wall to the hole in the door, and staple it along the edges everywhere in between so it's not in the way. Finally, I'll mount a TPU case on the top part of the door by drilling holes and screwing it in, securing it with hex fasteners on the other side of the door. I've included a simple MS Paint rough draft of what the finished product will look like.
The idea is that it will be mounted on the door, the cords won't be visible, and it will always be connected to a power source (unless I remove it temporarily). I'm not too worried about frying the battery since there are not many instances that would require me to remove it from power so as to rely on the battery. I hate to be so OCD but visible cords are a bit of a bother to me. However, if you have any ideas as to how I may hide them with the method you mentioned I'd be happy to hear them since your method sounds far easier and less destructive, and probably an all around better option if it weren't for those pesky cords! Also, since my tablet hasn't arrived yet I can't check this for myself: (if you have the same tablet) does the Galaxy Tab 3 7.0 have NFC capabilities? I couldn't find anything saying it did, but I couldn't find anything saying it didn't either. If so, I'd put an NFC sticker on the inside of the case and create a set of tasks in Tasker so that when I put it in its home it goes into "Kitchen Mode". Anyway, thanks for all your help and suggestions, and whatever I end up doing I will definitely post a few pics to show it off!
Yes.. I can see that fastening a tpu case to the cabinet door would work out good... and hiding your cord is a neet way too... too bad that your cabinet door will have to have a huge hole it it behind the Tab...
Maybe mount the TPU closer to the edge and run the Micro USB out of the tab, and a U-turn BEHIND the cabinet door instead of thru it.. your tab will be off center from the cabinet door... but and now remember... it's stuck there. when you pull your tab out.. you'll have an empty TPU case with 4 screws hanging on your cabinet door.
Ive seen stick on magnet strips here about 1"X4".. peel and stick.... I think 4 of those on a TPU case... perfect.. cause you can snatch it off the fridge anytime. carry it away.. stick it to the stove hood..... anywhere.... screwing to a door is semi permanant.. .. Ill go so far as to suggest 2 TPU's... one magnets on the back.. and 1 screwed to the cabinet door.
Subscribe to this thread and it will notify you of replies immediately....
good luck.. keep the ideas comming...
by the way... I thought we were talking about the 8 inch tab3 not the 7,,,,, my bad... I have an 8 incher
Click to expand...
Click to collapse
I do like the fact that your way doesn't involve destroying parts of my kitchen! I'm thinking now that if I find a way to fasten the USB cable to the fridge in a semi-permanent manner it may not be so bad... The cord is white, like the fridge, and with it being flat it may be less noticeable. I wonder how it would hold up with the door being open and closed, as in whether or not it would slide/fall from the repeated movement... This is going to be a tougher decision than I initially thought! At least there's time to figure it out, the tablet won't be here for like 2 months.
Click to expand...
Click to collapse
ill get me some stick on magnets soon and stick them to my TPU and test it out.
Ill post the results..
How come yours wont come in for 2 months? and are you getting the 7" or the 8"
Ive seen the tab3 -7"incher at Best Buy last weekend for only 49$$ but they want you to contract up on a data plan..
WEAK!!!!... I pull my ATT go phone sim out of my phone and jam it into my 315 and BAM!!! an 8" Galaxy phone with data, mms, and voice calls!!!
good luck
jimmbomb said:
ill get me some stick on magnets soon and stick them to my TPU and test it out.
Ill post the results..
How come yours wont come in for 2 months? and are you getting the 7" or the 8"
Ive seen the tab3 -7"incher at Best Buy last weekend for only 49$$ but they want you to contract up on a data plan..
WEAK!!!!... I pull my ATT go phone sim out of my phone and jam it into my 315 and BAM!!! an 8" Galaxy phone with data, mms, and voice calls!!!
good luck
Click to expand...
Click to collapse
Please do post results! Sorry I didn't see the reply again, I did subscribe to the thread but I must have missed the email... now it's been a while! Anyway, the 2 month period is just one of the hoops TWC makes you go through to get something free. It will be the 7 inch tablet. I am actually on the phone with them now trying to get them to honor their agreement and it's like pulling teeth. But they are either going to give me a tablet or I'm not going to pay my bill for the next 3 months to make up the difference and I'll buy my own damn tablet! Anyway, I intend to post photos when it's done. I've got everything set up, I just need a table to go in the TPU case.
UPDATE: Just got off the phone with TWC after an hour and 36 minutes, and they told me that they are going to "pass my details to the correct department" and I'd get a call within "3-4 days". Funny, as I pointed out, that was the same thing they told me 8 days ago, after another equally long phone conversation. Anyway, to sum it up they are giving me a credit equal in value to the tablet and I'm debating between the Galaxy Tab 3 (7 inch), which was what the promotion originally offered, or the 2013 Nexus 7. The Nexus has gotten great reviews, is there anything about the Galaxy Tab that you'd recommend over the Nexus? I know I'm kind of getting off track here but I'm just curious.
Super Sam Galaxy said:
Please do post results! Sorry I didn't see the reply again, I did subscribe to the thread but I must have missed the email... now it's been a while! Anyway, the 2 month period is just one of the hoops TWC makes you go through to get something free. It will be the 7 inch tablet. I am actually on the phone with them now trying to get them to honor their agreement and it's like pulling teeth. But they are either going to give me a tablet or I'm not going to pay my bill for the next 3 months to make up the difference and I'll buy my own damn tablet! Anyway, I intend to post photos when it's done. I've got everything set up, I just need a table to go in the TPU case.
Click to expand...
Click to collapse
well... after you vacated the thread, I figured you lost interest or just decided to drill holes in your cabinet door..
So, I didnt get any magnets.. BUT I will get them this weekend.. maybe tomorrow... Id like to shoot a video of it stuck to the fridge while opening anf closing... how to post it though??
jimmbomb said:
well... after you vacated the thread, I figured you lost interest or just decided to drill holes in your cabinet door..
So, I didnt get any magnets.. BUT I will get them this weekend.. maybe tomorrow... Id like to shoot a video of it stuck to the fridge while opening anf closing... how to post it though??
Click to expand...
Click to collapse
Perhaps upload to Youtube and send a link? Anyway, don't worry about it if it's a bother, but if you get a chance I'd be interested to see. I'll try to keep up with the thread better!
jimmbomb said:
well... after you vacated the thread, I figured you lost interest or just decided to drill holes in your cabinet door..
So, I didnt get any magnets.. BUT I will get them this weekend.. maybe tomorrow... Id like to shoot a video of it stuck to the fridge while opening anf closing... how to post it though??
Click to expand...
Click to collapse
Also, here's a photo of the finished product (pending insertion of tablet). Let me know what you think.
Super Sam Galaxy said:
Also, here's a photo of the finished product (pending insertion of tablet). Let me know what you think.
Click to expand...
Click to collapse
well that looks pretty cool, now that sits right in the middle of your cabinet door? How did you mount the case to the door, I don't see any screws on the backside of the case that went through the cabinet door with I'm guessing nuts on the other side..I will look for the magnets today at to hardware stores on the way home from work
jimmbomb said:
well that looks pretty cool, now that sits right in the middle of your cabinet door? How did you mount the case to the door, I don't see any screws on the backside of the case that went through the cabinet door with I'm guessing nuts on the other side..I will look for the magnets today at to hardware stores on the way home from work
Click to expand...
Click to collapse
Thanks! It's actually a flip-cover case, so the screws are in the cover part, which is flipped over behind it. then I drilled a small hole for the micro USB cable and ran that along the edge of the inside of the cabinet. Now that I'm debating getting a Nexus 7 instead (TWC just gave me a credit to my account in the amount of the tablet, so I have up to $200 to go toward any tablet I want at this point) I'm considering using a wireless charging pad so all I have to do is place the tablet in the case, though not sure if that would work through a case. Still playing with ideas, and if I do the Nexus 7 then I'll need a new case, but thankfully, they're cheap!
Super Sam Galaxy said:
Thanks! It's actually a flip-cover case, so the screws are in the cover part, which is flipped over behind it. then I drilled a small hole for the micro USB cable and ran that along the edge of the inside of the cabinet. Now that I'm debating getting a Nexus 7 instead (TWC just gave me a credit to my account in the amount of the tablet, so I have up to $200 to go toward any tablet I want at this point) I'm considering using a wireless charging pad so all I have to do is place the tablet in the case, though not sure if that would work through a case. Still playing with ideas, and if I do the Nexus 7 then I'll need a new case, but thankfully, they're cheap!
Click to expand...
Click to collapse
Ok... lets try this...
https://www.youtube.com/watch?v=5jD25aOvicI&feature=youtube_gdata_player
Now, my fridge finish is textured and not smooth. Kind of like a course orange peel,
So I think the grip was not as strong as if it were a smooth surface. If I were to keep this, I would go with a 1 inch wide magnet instead of a half inch which was $1.59 for 30 inches X 1/2".
Good luck!
jimmbomb said:
Ok... lets try this...
https://www.youtube.com/watch?v=5jD25aOvicI&feature=youtube_gdata_player
Now, my fridge finish is textured and not smooth. Kind of like a course orange peel,
So I think the grip was not as strong as if it were a smooth surface. If I were to keep this, I would go with a 1 inch wide magnet instead of a half inch which was $1.59 for 30 inches X 1/2".
Good luck!
Click to expand...
Click to collapse
Looks great! When you say the grip isn't as strong, I'm wondering, did it slide at all when you opened and shut the door? I didn't see any movement the first time you shut the fridge door and it didn't seem to be in a noticeably different location so I couldn't tell if it did, but that's my primary concern with the magnet method, so if it stays in place then that looks like a perfect solution.
On another topic, what app are you using for the dialer? As I understand it (correct me if I'm wrong), the tablet itself does not come with a dialer, and that was something I was planning on looking into down the road - particularly one that can be used with Google Voice. So my questions are 1) what is the name of the app and 2) does it allow Google Voice capabilities? I know that Google Voice is going to disable third party apps that use its service in a few months, but in the mean time it would be cool to use it to make calls.
Anyway, thanks for taking the time to make the video, and I really like how you have it set up.
Super Sam Galaxy said:
Looks great! When you say the grip isn't as strong, I'm wondering, did it slide at all when you opened and shut the door? I didn't see any movement the first time you shut the fridge door and it didn't seem to be in a noticeably different location so I couldn't tell if it did, but that's my primary concern with the magnet method, so if it stays in place then that looks like a perfect solution.
On another topic, what app are you using for the dialer? As I understand it (correct me if I'm wrong), the tablet itself does not come with a dialer, and that was something I was planning on looking into down the road - particularly one that can be used with Google Voice. So my questions are 1) what is the name of the app and 2) does it allow Google Voice capabilities? I know that Google Voice is going to disable third party apps that use its service in a few months, but in the mean time it would be cool to use it to make calls.
Anyway, thanks for taking the time to make the video, and I really like how you have it set up.
Click to expand...
Click to collapse
Like I said that my fridge has a textured finish, so the mags were not getting a solid grip.
It DID stay up there. I even shut the fridge door hard once to test it, but, I'm suspicious, so IF,
IF, I were to do this set up on MY fridge, I would double up on the mag area. & yes, It did NOT move when I had it, just that I wouldnt do it full time without doubling up on the mag area..
My SM-T315 8" Tab came with the Samsung dialer installed.. ya see... It's actually an 8 inch galaxy phone.
Does everything the phones do just in a larger screen.
It has a sim card slot... I take the sim out of my smaller phone (ATT) and slide the sim into the tab 3 8" and BAM!!! The tab is now my phone...
Phone , data plan, mms, everything now comes to the tab with my same number. No need for google voice.
it cost a bit more than the wifi only ones sold at the brick and mortars here in the USA, but, I like the phone and mms features.
good luck
Good luck..
jimmbomb said:
Like I said that my fridge has a textured finish, so the mags were not getting a solid grip.
It DID stay up there. I even shut the fridge door hard once to test it, but, I'm suspicious, so IF,
IF, I were to do this set up on MY fridge, I would double up on the mag area. & yes, It did NOT move when I had it, just that I wouldnt do it full time without doubling up on the mag area..
My SM-T315 8" Tab came with the Samsung dialer installed.. ya see... It's actually an 8 inch galaxy phone.
Does everything the phones do just in a larger screen.
It has a sim card slot... I take the sim out of my smaller phone (ATT) and slide the sim into the tab 3 8" and BAM!!! The tab is now my phone...
Phone , data plan, mms, everything now comes to the tab with my same number. No need for google voice.
it cost a bit more than the wifi only ones sold at the brick and mortars here in the USA, but, I like the phone and mms features.
good luck
Good luck..
Click to expand...
Click to collapse
That's nice that it works as a phone out of the box. I use Google Voice as my primary number, which is a pain sometimes, but I like the fact that I can answer it from my mobile, my home phone and my computer, and when I call out from any of those it also shows the Google Voice number on caller ID to the person I'm calling (for the home phone, this is through Ooma Telo). Wish I could have the tablet work the same way in case it's closer when the phone rings. Did you have to order that through a special online service, or can you find that version on Amazon?
Super Sam Galaxy said:
That's nice that it works as a phone out of the box. I use Google Voice as my primary number, which is a pain sometimes, but I like the fact that I can answer it from my mobile, my home phone and my computer, and when I call out from any of those it also shows the Google Voice number on caller ID to the person I'm calling (for the home phone, this is through Ooma Telo). Wish I could have the tablet work the same way in case it's closer when the phone rings. Did you have to order that through a special online service, or can you find that version on Amazon?
Click to expand...
Click to collapse
Maybe not Amazon.. I know they had the 311 which is the same but NON-LTE.... E bay has a bunch..
I got mine and all my international stuff from Negri Electronics. They operate in Las Vegas. Very good store and after the sale customer relations.
good luck deciding now.
jimmbomb said:
Maybe not Amazon.. I know they had the 311 which is the same but NON-LTE.... E bay has a bunch..
I got mine and all my international stuff from Negri Electronics. They operate in Las Vegas. Very good store and after the sale customer relations.
good luck deciding now.
Click to expand...
Click to collapse
Thanks!
The nexus is a newer version of android but the galaxy has a SD card slot. A big plus in my mind.
Sent from my SM-T210 using XDA Premium 4 mobile app
Latheman said:
The nexus is a newer version of android but the galaxy has a SD card slot. A big plus in my mind.
Sent from my SM-T210 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I agree that removable storage is nice, but I wouldn't say it's a deal breaker for me because of the fact that I can get something like a Meenova to easily add more storage if I need to. At this point I'm leaning toward the Nexus because for this purpose, wireless charging capability seems more beneficial than removable storage simply due to the fact that it would be cool to not have a cord showing when it's mounted, and to not have to plug it/unplug it every time I want to take it down for a bit. Of course, the flip side is that instead of seeing a cord, I'd see the Meenova sticking out of it, but that doesn't seem as bad since I probably wouldn't need to have one in there all the time. Either way, I do appreciate the suggestion and I will certainly take into account the capability for removable storage when making my choice. Thanks!