Related
Last night while using the phone I noticed this slight clicking sound from the bottom right corner of the screen (touch-sensitive panel). So I kept pressing it and I wasn't hallucinating, its there. Also figured the sound also comes when I press the bottom right or bottom center edge of the phone. The creaking sound isn't loud but its noticeable when I hold the phone in specific angles and while typing if haptic feedback is on, I think the vibration also makes it happen(weird)
So except for this my HOX is fine and am wondering if I should get it changed.
Are there any long term effects to this? I'm starting to just ignore the sound and trying not to make it happen purposely
Depends, does it make the sound when you're using it normally? If it does I would consider swapping it, although you said everything else was fine.
If on the other hand, it makes the sound if you hold it in a certain way and push unusually hard then I would say stop intentionally pushing it in a weird way and use it properly.
People have been complaining about "screen flex" along the side of the phone when they push on the edge and run their fingers along the side. Want to get rid of the screen flex when you push the edge of your phone and move your finger along it? STOP PUSHING THE EDGE OF YOUR PHONE!!!
Just remember that some phones have had screen flickering, yellow marks and even scratches under the screen, you may not be as lucky as your were the first time if you choose to swap it.
what you described is not flex even, most mobile devices have a creak some where
Flex should mean the screen is literally loose to warrant an exchange
rob9 said:
Depends, does it make the sound when you're using it normally? If it does I would consider swapping it, although you said everything else was fine.
Click to expand...
Click to collapse
The only time I've noticed this sound while using the phone is during haptic feedback from typing on the keyboard. I switched haptic feedback off to save battery and for this 'problem'
If on the other hand, it makes the sound if you hold it in a certain way and push unusually hard then I would say stop intentionally pushing it in a weird way and use it properly.
Click to expand...
Click to collapse
I did reduce pushing it intentionally since last night after figuring it might mess it up more.
People have been complaining about "screen flex" along the side of the phone when they push on the edge and run their fingers along the side. Want to get rid of the screen flex when you push the edge of your phone and move your finger along it? STOP PUSHING THE EDGE OF YOUR PHONE!!!
Click to expand...
Click to collapse
Yea after I got mind-f***ed I did press the edge a lot to be sure.(we humans ...) But now am controlling myself to not press the edge and use it normally.
Just remember that some phones have had screen flickering, yellow marks and even scratches under the screen, you may not be as lucky as your were the first time if you choose to swap it.
Click to expand...
Click to collapse
Exactly why am thinking hard if I should get mine replaced. Another reason being I'll be leaving UAE(got the phone here) for good in a week and if by chance I do get a defective unit I'll waste a lot of time.
I'm not gonna play around with the edge anymore haha.
hamdir said:
what you described is not flex even, most mobile devices have a creak some where
Flex should mean the screen is literally loose to warrant an exchange
Click to expand...
Click to collapse
Yes you're right a lot of electronics and gadgets have creaking parts. Mostly the ones made outa plastic though. Does your HOX creak too?
death__machine said:
Yes you're right a lot of electronics and gadgets have creaking parts. Mostly the ones made outa plastic though. Does your HOX creak too?
Click to expand...
Click to collapse
my first flexed bad (soft one pressure, loose) on the left side, although i loved it so much because it had the much more dense yellowish sharp screen
second hox had a bad coating and slight flex on the left side, also hot pixels
third HOX my current is perfect, the screen is rigid on all sides expecially left and right, but it creaks if its around 50degree hot on two out of the four corners, very very slight creaks and only happens if it test it intentionally, it has the acer white screen with visible pixel grid, so the first hox screen i miss so much
im saying don't replace for a little reason bro it will be a bumpy ride, if the screen is loose then ok, you can see it by testing for light bleed in a dark room or if its physically moving
I think my screen is perfect. I can't figure how you're suggesting I test it, but pressing along the edges with slight pressure doesn't cause any change in the screen. The pixels are all good and no flickering. I think its a yellowish screen and not the bluish one.
How do you find out what LCD brand is on your HOX?
death__machine said:
I think my screen is perfect. I can't figure how you're suggesting I test it, but pressing along the edges with slight pressure doesn't cause any change in the screen. The pixels are all good and no flickering. I think its a yellowish screen and not the bluish one.
How do you find out what LCD brand is on your HOX?
Click to expand...
Click to collapse
there is a guide somewhere on how to check the LCD
anyway it sounds perfect dont get rid of it!
Hmm I don't think I'll get it changed, I love it too much . Just have to get used to the occasional/random creak/click sounds from the device.
Hi
Please can anyone tell me which bit of the inside of the phone (or the back cover?) relates to the capacative button brightness?
I changed my back cover from black to white and after doing so the middle button of the three is VERY dim. It looks like it's not lit at all but if I look at it in the dark it is actually still lit but extremely dimly. I was really careful when taking the phone apart but I must have disturbed something that controls these buttons. The two on either side are nice and bright as normal. I have no idea which bit I should be looking at to try to fix it.
I'd be very grateful for any help.
Regards x
eggshaped said:
Hi
Please can anyone tell me which bit of the inside of the phone (or the back cover?) relates to the capacative button brightness?
I changed my back cover from black to white and after doing so the middle button of the three is VERY dim. It looks like it's not lit at all but if I look at it in the dark it is actually still lit but extremely dimly. I was really careful when taking the phone apart but I must have disturbed something that controls these buttons. The two on either side are nice and bright as normal. I have no idea which bit I should be looking at to try to fix it.
I'd be very grateful for any help.
Regards x
Click to expand...
Click to collapse
FIXED
In case anyone stumbles upon this in the future with the same problem the fix was really simple. I located the flex with the lights attached at the bottom, lifted it up and there was a thin black sticky band underneath which I assume was used to hold the flex cable down. Part of the black tape had covered the light, therefore making it less bright. I used tweezers to pull it away and lay it flat and all my lights were of equal brightness again. Simples!
Hi Guys,
Newbie here, wonderful forum and lots of tech stuff, kudos to every one who have contributed.:good:
Facing couple of issues with my NOKIA X, request your help pls!
Issue: Screen goes blank during a call, when using the phone without headset, & doesnt come back on, untill the call is disconnected by the caller at the other end.During this period, when the screen goes blank, it leaves me with no access to the menu, dialpad, etc and the call disconnect button doesnt end the call as well.
1) Turned off proxmity sensor in the "Phone-Settings" menu, it works properly.ie the screen stays "on" during the call and no issues with disconnecting the call, accessing the other dialpad options etc.
2)Also Turned on/off Automatically adjust screen brightness , observed that issue is intermittent.
Any leads would be helpful.Not sure about sensor calibration and tweaks
thanks
K
the screen supposedly to turn off during calls when it detect something near the proximity sensor ie your face when attending calls, this is to preserve power, and it should've come back on again when u bring it far from your face. this is default bahaviour on all smartphones nowadays.
but when it doesn't come back on again after u bring it far from your face after making calls, then thats a problem.
u use screen protector? a thick one and it covering the proximity sensor perhaps? from my experience thick screen protector that covering the sensor can interfere with its sensitivity.
the sensor is on the right side of the nokia logo infront of the phone. look closely and u could see it.
mdfzhi said:
the screen supposedly to turn off during calls when it detect something near the proximity sensor ie your face when attending calls, this is to preserve power, and it should've come back on again when u bring it far from your face. this is default bahaviour on all smartphones nowadays.
but when it doesn't come back on again after u bring it far from your face after making calls, then thats a problem.
u use screen protector? a thick one and it covering the proximity sensor perhaps? from my experience thick screen protector that covering the sensor can interfere with its sensitivity.
the sensor is on the right side of the nokia logo infront of the phone. look closely and u could see it.
Click to expand...
Click to collapse
Thanks for your reply!.
Yes recently i got a matt finish screen protector on.,let me try taking it off and then observe if the issue pops up..Yes its a little frsutrating when the screen doesnt come back on once its moved away from the face & will have to wait till the caller disconnects the line from their end
mdfzhi said:
the screen supposedly to turn off during calls when it detect something near the proximity sensor ie your face when attending calls, this is to preserve power, and it should've come back on again when u bring it far from your face. this is default bahaviour on all smartphones nowadays.
but when it doesn't come back on again after u bring it far from your face after making calls, then thats a problem.
u use screen protector? a thick one and it covering the proximity sensor perhaps? from my experience thick screen protector that covering the sensor can interfere with its sensitivity.
the sensor is on the right side of the nokia logo infront of the phone. look closely and u could see it.
Click to expand...
Click to collapse
Thank you mdfzhi, i took off the screen guard (yeah it looked unusually thick :silly and it seems to work at the moment, will monitor and see if the issue pops up!:good:
thanks again!!
search for screen protector that doesn't cover the proximity sensor, or if u cant find one that doesn't, cut yourself a hole in place of the sensor.
i'm using a thick anti fingerprint screen protector myself but its not covering the proximity sensor.
mdfzhi said:
search for screen protector that doesn't cover the proximity sensor, or if u cant find one that doesn't, cut yourself a hole in place of the sensor.
i'm using a thick anti fingerprint screen protector myself but its not covering the proximity sensor.
Click to expand...
Click to collapse
Similar issue here! Screen goes off while phone is touched to ear however, after taking phone away screen dosent come up! I need to swipe the proximity sensor each time i want to get the display ON back again!!
Someone please CONFORM THIS BUG!
Especially someone running stock! ( I had issues with all stock versions)
@SilverDragon24! Brother do u face this issue?
mdfzhi said:
search for screen protector that doesn't cover the proximity sensor, or if u cant find one that doesn't, cut yourself a hole in place of the sensor.
i'm using a thick anti fingerprint screen protector myself but its not covering the proximity sensor.
Click to expand...
Click to collapse
Yes i did the same, cut off the top section so that it doesnt cover the sensor, working ok now!
nokia xl blank screen call
Hi guys, my XL got blank screen every I make a call, what happen...
Blank screen show in every rom I've installed, but not on stockrom, at stockrom blank screen call only happen once after that going normal...
I'm not using screen protector at all...
What's wrong, how to fix that ??
this problem is in NOKIA X stock rom..
other roms doesnt have this problem..
its a bug in stock.
Covering the screen with the palm of my hands when it is on doesn't seem to do anything. It doesn't dim the display although the display does dim after 5 seconds or so. Am I missing something?
Keep trying and you'll figure it out after a while. Took me some time to realize that it works better when the palm comes into contact with the screen, and certain parts of the palm trigger the action better than others.
I'm such an idiot! Thank you. I was thinking it was to cover a light sensor and didn't want to touch the screen with my hand for fear of setting off "OK Google". For those out there with the same confusion, cover the watch with your palm actually touching the screen, and the phone will vibrate to confirm the ""Dimming
Forget all the "you need to not press hard" bull****, it's way simpler than that.
Register your finger while holding the phone in one hand, position your fingerprint on the sensor exactly as you would casually, keep registering it that way, from a limited position on a one handed held.
If you do a "proper" registering process of your fingers from artificial positions just because you think it helps the sensor, it won't work, even minimal changes in your finger shape will make it generate different keys that will not match a real life press.
I registered my fingers from positions I would practically use to unlock later on, the success rate is now 100% as long as I don't miss the sensor on dark screen, no matter the pressure or the time you hold your finger on the sensor, it will now work every single time
Corv0 said:
Forget all the "you need to not press hard" bull****, it's way simpler than that.
Register your finger while holding the phone in one hand, position your fingerprint on the sensor exactly as you would casually, keep registering it that way, from a limited position on a one handed held.
If you do a "proper" registering process of your fingers from artificial positions just because you think it helps the sensor, it won't work, even minimal changes in your finger shape will make it generate different keys that will not match a real life press.
I registered my fingers from positions I would practically use to unlock later on, the success rate is now 100% as long as I don't miss the sensor on dark screen, no matter the pressure or the time you hold your finger on the sensor, it will now work every single time
Click to expand...
Click to collapse
I tend to agree with you. I registered both right and left thumbs and they both work on command. No 2nd or 3rd attempts yet. Just register the thumbs like you would naturally hold them on the screen(flat).
I also feel like the fingerprint scanner icon is a bit misleading, given the fact that the sensorbis actually above the actual icon
Corv0 said:
Forget all the "you need to not press hard" bull****, it's way simpler than that.
Register your finger while holding the phone in one hand, position your fingerprint on the sensor exactly as you would casually, keep registering it that way, from a limited position on a one handed held.
If you do a "proper" registering process of your fingers from artificial positions just because you think it helps the sensor, it won't work, even minimal changes in your finger shape will make it generate different keys that will not match a real life press.
I registered my fingers from positions I would practically use to unlock later on, the success rate is now 100% as long as I don't miss the sensor on dark screen, no matter the pressure or the time you hold your finger on the sensor, it will now work every single time
Click to expand...
Click to collapse
But when I try to casually tap the screen to register fingerprint naturally, it won't register, keeps saying press harder or hold longer
Or register the same finger twice.. That's the better solution
Enviado desde mi SM-G975F mediante Tapatalk
Shuthefrontdoor said:
But when I try to casually tap the screen to register fingerprint naturally, it won't register, keeps saying press harder or hold longer
Click to expand...
Click to collapse
The tap needs a certain amount of pressure, not too light either
Corv0 said:
Forget all the "you need to not press hard" bull****, it's way simpler than that.
Register your finger while holding the phone in one hand, position your fingerprint on the sensor exactly as you would casually, keep registering it that way, from a limited position on a one handed held.
If you do a "proper" registering process of your fingers from artificial positions just because you think it helps the sensor, it won't work, even minimal changes in your finger shape will make it generate different keys that will not match a real life press.
I registered my fingers from positions I would practically use to unlock later on, the success rate is now 100% as long as I don't miss the sensor on dark screen, no matter the pressure or the time you hold your finger on the sensor, it will now work every single time
Click to expand...
Click to collapse
Same, and i registered the finger I'm going to be using most twice. Registered casually and from a natural position. I think mine has failed to unlock maybe 3 times in a week. In this case...keep it simple don't over think it.
Sensor is off
I noticed when the screen is off in dark mode and u take a flashlight on a angle of the screen i noticed the sensor is like a U shape just slighty to the left of the finger print icon, now that i kinda setup my finger print just a tat left og the finger print icon its been 100 procent i also noticed moist fingers work better . i could be wrong about it being a sensor but the U shape i think would be the sensor
wirelezzz said:
I noticed when the screen is off in dark mode and u take a flashlight on a angle of the screen i noticed the sensor is like a U shape just slighty to the left of the finger print icon, now that i kinda setup my finger print just a tat left og the finger print icon its been 100 procent i also noticed moist fingers work better . i could be wrong about it being a sensor but the U shape i think would be the sensor
Click to expand...
Click to collapse
You don't need to move your finger away, the sensing part of the sensor is perfectly aligned in the middle
New update on firmware.Science for snapdragon. SBA TO SD3. Made a world of difference for me. Can't wait for my replacement Whitestone to get here to see if sensor works any better with tempered glass. This update absolutely made a huge difference. Not slightly, very significant change for me. I register both thumbs twice and I couldn't get it to not unlock every time. 50+ unlocks and maybe 2 failures. I stopped counting at 50.
Will it work on verizon or only unlocked?
Sent from my SM-G975U using Tapatalk
im on ASC8 firmware on the G9750 10+ and its terrible. hopefully an update comes soon..
Mine has been pretty much perfect since the new firmware update.
Sent from my SM-G975F using Tapatalk
nugzo said:
New update on firmware.Science for snapdragon. SBA TO SD3. Made a world of difference for me. Can't wait for my replacement Whitestone to get here to see if sensor works any better with tempered glass. This update absolutely made a huge difference. Not slightly, very significant change for me. I register both thumbs twice and I couldn't get it to not unlock every time. 50+ unlocks and maybe 2 failures. I stopped counting at 50.
Click to expand...
Click to collapse
I'm waiting on my Whitestone replacement as well. Can you keep us informed on how the sensor works with your new install? I had to pull the last one. It was horrible. I miss my glass...
The problem for me and many people is that when the finger being scanned is dry, scanning won't work (and will be asked to "press harder"). Some people then try to press really hard and it will, forever, say "not match".
People with moisted fingers will not have this problem and will not understand the kind of people I mentioned above. Since I have S10+ for a month, I, kind of, know when the scanning will not work. I will use face scanning instead or if I really want to scan my finger with whatever reason, I just rub my nose with my thumb then it will 100% work (greasy nose does the trick).
I don't know if Samsung can ever fix this since it is not how accurate the reader is.
Dry fingers don't work with the fps even when removing the pre-installed screen protector?
I am debating to remove the screen protector and my main points are:
1. The protection offered by the pre installed screen protector is minimal either way.
2. That the screen colors and usage will become much better.
3. That the fps will work much better even with dry fingers due to the oleophovic coat of the screen.
Has anyone who removed the screen protector tested this?
madvinegar said:
Dry fingers don't work with the fps even when removing the pre-installed screen protector?
I am debating to remove the screen protector and my main points are:
1. The protection offered by the pre installed screen protector is minimal either way.
2. That the screen colors and usage will become much better.
3. That the fps will work much better even with dry fingers due to the oleophovic coat of the screen.
Has anyone who removed the screen protector tested this?
Click to expand...
Click to collapse
I removed mine yesterday and it does help a little with the fps. I still don't like the fps though, I would much rather have a Face ID equivalent. Or have the fps on the back.
itsachirpthing said:
I'm waiting on my Whitestone replacement as well. Can you keep us informed on how the sensor works with your new install? I had to pull the last one. It was horrible. I miss my glass...
Click to expand...
Click to collapse
I had reached out to Whitestone because my first install failed. I had the WSD on my s9+ and went through 5 or 6 in the year (I dropped my phone a lot). So I knew what I was doing, but the first try had a huge bubble. Tried doing the cleaning and reinstall with the backup glue and had a bunch of microscopic bubbles in the top and bottom (guessing I didn't clean it well enough before reinstall). I wasn't sure how to register warrenty wise because technically it worked fine, just was having FPS issues. They ended up replacing without me paying for the shipping which was awesome of them.
Recieved my replacement today, and the install is flawless. One thing to note is on the 10+ the absorb pads hook into the top tray not the bottom (that was a hell of a mess the first time). The original kit didn't come with the pads pre-installed like the replacement kit.
I haven't even gotten the latest OTA yet, and with the WSD glass, it's just as quick and success rate is the same as when I had the pre-installed protector. Might even be faster than my s9+ was...