Hi,
I upgraded to Android 7.1.1 on my xperia z5 and since then there has been Bluetooth issues with my watch. Generally the Bluetooth wont work on my watch however I have managed to find my watch using my phone using the Sony Smart Connect App. So I have got my watch in a basic mode in that its sort of connected to my phone but I only get to tell the time and use the step counter.
I am on:-
Android Wear - 1.5.0.3508863
Android OS - 6.0.1
Build Number - M1D64T
I have tried doing a reset, hard reset, going into the phones settings and even sent this off to sony where they said the Bluetooth was not working, yet when I got the watch back I managed to sort of sync this back up to my phone.
Just asking for advice, as I have had the watch from Brand New and its lasted 14 months and the Bluetooth has broke, I think its more a software issue than a hardware one to be honest.
Thanks
Hello i think have the same issue. I reset, install custom roms... but the SW3 don't pair with my phone (OPO2). I try to pair with other phones, tablets, but now the bluetooh is dead
Some advice?
My watch no longer shows up on any device. I've been trying to fix this issue but I can solve it.
Related
I bought a SONY SmartWatch few weeks ago 2weeks later, a Zopo ZP300+ phone
After I get it, I realized that the zp300+ has a small bluetooth compatibility issue. My Sony Smart Watch (SW) don't working with it. The phone findes it and I can pair them, but the communication between them not so good. The SW reconnect allwayse when i touch a widget or icon and it must communicate with the phone. The zp300+ use this ROM
My HTC Desire HD which has TrickDroid rom, working well with SW.
If somebody could help me, I will realy happy.
Here is the video about the blootouth problame:
zoltanb said:
I bought a SONY SmartWatch few weeks ago 2weeks later, a Zopo ZP300+ phone
After I get it, I realized that the zp300+ has a small bluetooth compatibility issue. My Sony Smart Watch (SW) don't working with it. The phone findes it and I can pair them, but the communication between them not so good. The SW reconnect allwayse when i touch a widget or icon and it must communicate with the phone. The zp300+ use this ROM
Click to expand...
Click to collapse
Same problem with Wiko cink peax and king in france.
Hi all
I've recently started using my Moto 360 again alaong with my HTC M8 running the Radium 1.4 ROM. I set the watch up and all was working perfectly. I then noticed the watch was not receiving any notifications, this was after I had been out for a while with the watch at home. The only way I could figure out re-enabling them was to factory reset the watch then set it up again. I don't want to have to do this every time I go out without the watch etc. I had similar problems with the watch not pairing via Bluetooth with my phone after it had already been paired. The only way I could get it to pair was again to factory reset. This issue seems to have gone away now and it's just the notifications that seem to be a problem.
Any advice would be appreciated.
Thanks
Looks like ROM issue!
Sent from my SM-N9005 using Tapatalk
nijom said:
Looks like ROM issue!
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Happens with ever ROM I've tried
stevoh84 said:
Hi all
I've recently started using my Moto 360 again alaong with my HTC M8 running the Radium 1.4 ROM. I set the watch up and all was working perfectly. I then noticed the watch was not receiving any notifications, this was after I had been out for a while with the watch at home. The only way I could figure out re-enabling them was to factory reset the watch then set it up again. I don't want to have to do this every time I go out without the watch etc. I had similar problems with the watch not pairing via Bluetooth with my phone after it had already been paired. The only way I could get it to pair was again to factory reset. This issue seems to have gone away now and it's just the notifications that seem to be a problem.
Any advice would be appreciated.
Thanks
Click to expand...
Click to collapse
Hello,
It is actually an issue with the recent Android Wear app update...just read all the comments from 360 owners. Mine will not connect either.
Cheers
Well at least it was nothing to do with my phone/watch/ROM. Must have been updated recently as it's been fine! Back on form
Cheers
jschill31 said:
Hello,
It is actually an issue with the recent Android Wear app update...just read all the comments from 360 owners. Mine will not connect either.
Cheers
Click to expand...
Click to collapse
stevoh84 said:
Well at least it was nothing to do with my phone/watch/ROM. Must have been updated recently as it's been fine! Back on form
Cheers
Click to expand...
Click to collapse
After 4 Android Wear updates they finally fixed the connection issue. I sent them several bug reports and I swear they didn't even look at them.
Cherrs
Nexus 6
I'm still having problems where my Moto 360 won't show notifications (text, email, phone calls). I've tried every recommended solution. After a factory reset it works for maybe 30 minutes and then stops. One thing I've noticed (and I don't know if it's related or not) is that the Android Wear version on my Phone (Galaxy S5) is 1.3.0.2284253 and on my Moto 360 it's 1.3.0.2166028. Shouldn't they match?
Ramer said:
I'm still having problems where my Moto 360 won't show notifications (text, email, phone calls). I've tried every recommended solution. After a factory reset it works for maybe 30 minutes and then stops. One thing I've noticed (and I don't know if it's related or not) is that the Android Wear version on my Phone (Galaxy S5) is 1.3.0.2284253 and on my Moto 360 it's 1.3.0.2166028. Shouldn't they match?
Click to expand...
Click to collapse
For anyone who runs across this at some point, I solved the problem (at least for me). I unistalled Light Manager and now I'm getting all notifications.
Arrrgh mine has started doing this again! It had been fine for a few weeks. Seriously needs sorting out
I just got a new Moto 360 2 days back, and noticed this issue soon after it updated itself maybe to 5.1.1. I restart my phone everytime i face this issue which seems to fix it. Also android wear shows an error message mentioning notification sync is not working.
aayushjoshi said:
I just got a new Moto 360 2 days back, and noticed this issue soon after it updated itself maybe to 5.1.1. I restart my phone everytime i face this issue which seems to fix it. Also android wear shows an error message mentioning notification sync is not working.
Click to expand...
Click to collapse
Still isn't resolved for me sadly and restarting the phone doesn't work. I'm just flashing a new ROM to see if that helps. My watch has randomly been saying Google Play Services isn't installed on the phone when it is. Strange happenings here!
I have exactly the same problem! Saying Google play services are not installed, no whatsapp or text notifications until I get an email then they mysteriously appear. also if I toggle notification to priority and back they appear. doing my head in
You need to restart the phone and the watch, not just the phone.
Also can try removing your phone from your watch's bluetooth pair list then also "forget" the watch in your phone's bluetooth menu, then re-pair the two. Should work no problem after that.
I find this only happens if i stray away too far from either device or one of them gets restarted for some reason.. but yeah, restarting both the phone and the watch, removing the phone and watch from both bluetooth lists, and then re pairing, has fixed it every time for me. No having to factory reset the watch or reflash rom or anything drastic like that.
Now if you're phone is always in your pocket/purse which is on you all the time and the watch is on your wrist too and it just drops connection randomly... then i'd say something is messed up with your watch or phone.
Hi guys, I have problem with notifications on my watch after the watch is not paired with my Lenovo K910 (CyanogenMod 12.1, Android 5.1.1) smartphone a few hours. The notifications is not coming to my Huawei watch, but the bluetooth connection between devices is good.
To solve the problem I need to do factory reset of my watch from Android Wear each time after the connection between devices is broken.
I checked settings in the Android Wear, all options of notifications is ON.
I broke my head, how to solve this problem..
flyalligator said:
after the watch is not paired with my Lenovo K910 (CyanogenMod 12.1, Android 5.1.1) smartphone a few hours
Click to expand...
Click to collapse
What do you mean exactly with "not paired"? Not connected?
themissionimpossible said:
What do you mean exactly with "not paired"? Not connected?
Click to expand...
Click to collapse
When I'm at home, I take off the watch and put them in the bedroom, but my smartphone is always with me.
If I go walk at evening for few hours, I leave the watch in bedroom.
I went through the same thing today. Reset and tested notifications...it didn't work at first...but I kept the phone 'ON' and kept sending SMS. Be sure to go through Android Wear Settings and the Watch setting and look for Resync All Notifications. I think that may have solved it for me. I think it is on the watch.
My issue seems to be different from others' as mine isn't just bluetooth losing its connection - it actually unpairs.
In my car (it has an Android Auto compatible infotainment system) it works fine for ages then fails to connect all of a sudden. Then after a while a message pops up on the car's screen saying "bluetooth pairing successful". The phone then asks me for contact sharing permissions. Of course it screws up the smart unlock feature as a result forcing me to set it up again.
On my Huawei watch 2 sport it loses connection and so the wear os app says the watch is disconnected. Bluetooth settings show the watch to be invisible and, as a result, smart unlock gets unconfigured and I have to set it up again. The watch battery discharges very quickly - probably constantly searching for the phone.
I reboot of both devices seems to fix it, for a while.
This is all since the Pie official update.
Does anyone have any fixes please?
gadgetgaz said:
My issue seems to be different from others' as mine isn't just bluetooth losing its connection - it actually unpairs.
In my car (it has an Android Auto compatible infotainment system) it works fine for ages then fails to connect all of a sudden. Then after a while a message pops up on the car's screen saying "bluetooth pairing successful". The phone then asks me for contact sharing permissions. Of course it screws up the smart unlock feature as a result forcing me to set it up again.
On my Huawei watch 2 sport it loses connection and so the wear os app says the watch is disconnected. Bluetooth settings show the watch to be invisible and, as a result, smart unlock gets unconfigured and I have to set it up again. The watch battery discharges very quickly - probably constantly searching for the phone.
I reboot of both devices seems to fix it, for a while.
This is all since the Pie official update.
Does anyone have any fixes please?
Click to expand...
Click to collapse
No fixes but same problems here
I'm having the same issue also very frequently with WiFi dropping all the time. These two reasons are linked from what I been told. Google telling me to RMA. The pain of that
Mine has done this with my Gear S3 watch since I first got the phone a few months ago, it had me seriously considering returning it for a while. Sometimes it would just disconnect from the bluetooth, but often it would unpair causing me to have to go through the whole set up process again. It did this on Android O, various DP builds of P but so far (touch wood) has been good with the latest version of the Samsung software and Android P.
I'm having the same issues as well and currently searching for answers.
Hello, as the title suggests, I have a Dasaita Max 10 HD px6. I have the following problem. The first time I installed it a few days ago I was able to pair my phone correctly. After it is no longer connected and from the bluetooth of the car it is not possible to find devices, nor the car radio is visible. I tried with 2 android phones and ipads. Entering the factory menu 126 in the BT Module initially FSC-BW124 was set then at the suggestion of the assistance I tried to set WQ_RF210 and WQ_816 but nothing the unit is not visible and does not see any bluetooth device.
I tried to do a factory reset and update to the latest version of Android 20210722 but it didn't fix the problem.
the MCU is the following MTCE_HA_V3.78.1
Do you have experience with this type of problem? How can this be solved?
Thanks in advance
Hmm, I would think that WQ_RF210 would work. Did you ever figure out which BT module was installed?
I have a Dssaita with the FSC-BW124 bluetooth chip. You issue occured to me once when i upgraded to the SCOUT ROM....the issue solved once i reinstalled the firmwre again...
when reinstalling please activate the WIPE DATA
Hi I have the same issue. I tried each version of Max 10 and vivid up to the latest and now I have the lasted mcu and version of Max 10 installed. However the issue remains and it's not letting me roll back to earlier versions.
Any help at all with this would be great.
Use the android bluetooth setting (not the bluetooth app, nor the vivid laucnher) for pairing the device...it seems to be some bug there...
go to Settings> Connected devices> Bluetooth and Perform the serch from there....once yout phone is discovered , pair from there the phone
First of all thanks for the reply. However, it's more that there is no connection at all. It can't find any devices via any method, app or settings.
Continuous reboots and it will eventually remember it has a Bluetooth & wifi chip and turn it on. Then any method of connecting will work. It then fails the next time it been turned off and on.