Okay. Preface. Am not an ultra-noob but completely new to HTC android environment.
I have taken an HTC 10 from a frnd and need to send it back in the stock unrooted way but need help for doing it.
The CID in CMD by typing "fastboot getvar cid" yields "HTC__060".
Where can I get the RUU application for this device?
it is unlocked Indian version, if that's of any help.
Any help appreciated.
Related
SOLVED
Hi all,
can anyone help to explain how to back to stock rom like first purchase condition after using this ? as i bought this used hox already rooted with leedroid.
i want to compare original condition first before do rooting. cos when do charging in turn-off condition, it'll turn-on by itself twice (i turn it of twice too as i prefer to charge battery while phone shutdown)
the seller cant help as he got it from others too.
and also how to know my hox is TW, HK etc version ?
Please help.
thanks
ps: got how to lock to early condition, but dont how to find out which RUU is mine as i dont know from where it's being purchased.
what i can inform are:
- S-ON
- HBOOT: 0.96.0000
-baseband: 1.1204.105.14
-build number: 1.29.707.11 (from fastboot getvar version-main cmd)
not sure if above will change if rooted and installed custom rom.
There are a few posts, but since I just did this here goes.
1. Find out your CID from fastbooto commands.
2. Download correct ruu for CID
3. Relock bootloader via fastboot
4. Load ruu while in fastboot
.....shazam
Sent from my HTC One X using XDA
Hi guys.Im new to HTC one X.I just bought an HTC one X from e-bay and it came pre rooted thought the phone looks brandnew.I tried to insert a sim and my phone keeps on showing an error saying process.com.android.phone is stopped and it does not show any signal bars.After several reboots sometimes signal bars do appear sometimes.But i am unable to make or recieve calls as my phone app keeps on force closing. My phone has stock ICS.
So if i flash a stock RUU will the problem be solved or is there anything that i can do to make my phone work?thank you.
I would recommend flashing a stock RUU.
You would need to check your CID and whether your bootloader is locked or unlocked. To do this, you can hold power+volume up down buttons to reboot phone to bootloader and see the first line.
The RUU you flash must match your CID.
Recommended for you:
RUUs: http://forum.xda-developers.com/wiki/HTC_One_X#Total_recovery_-_flashing_a_RUU_to_completely_restore_your_phone
About CID and other info: http://forum.xda-developers.com/showthread.php?t=2031359
Power button + volume down button (not up)
And post the outcome of this fastboot command
Fastboot getvar version-main
Tony Tan said:
I would recommend flashing a stock RUU.
You would need to check your CID and whether your bootloader is locked or unlocked. To do this, you can hold power+volume up down buttons to reboot phone to bootloader and see the first line.
The RUU you flash must match your CID.
Recommended for you:
RUUs: http://forum.xda-developers.com/wiki/HTC_One_X#Total_recovery_-_flashing_a_RUU_to_completely_restore_your_phone
About CID and other info: http://forum.xda-developers.com/showthread.php?t=2031359
Click to expand...
Click to collapse
Thanks for the help(i hit the thanks button too
one more question.Mine has got super CID.
So what RUU should i flash?
You mean Super CID 11111111?
Did you check with:
fastboot getvar cid
fastboot oem readcid
If my understanding is correct, you should be able to flash any RUU with any CID in that case.
Just make sure the RUU you are flashing is for your device model (HTC One X Endeavor, not HTC One XL or anything else)
I have never owned a supercid device though, so you might want to confirm with someone else.
For RUU downloads:
http://forum.xda-developers.com/showthread.php?t=2094113
http://forum.xda-developers.com/showthread.php?t=2189048
Credits to Mr Hofs for helping me find the links.
nuwanmw1988 said:
Thanks for the help(i hit the thanks button too
one more question.Mine has got super CID.
So what RUU should i flash?
Click to expand...
Click to collapse
Tony Tan said:
You mean Super CID 111111111?
Did you check with:
fastboot getvar cid
fastboot oem readcid
If my understanding is correct, you should be able to flash any RUU with any CID in that case.
Just make sure the RUU you are flashing is for your device model (HTC One X Endeavor, not HTC One XL or anything else)
I have never owned a supercid device though, so you might want to confirm with someone else.
For RUU downloads:
http://forum.xda-developers.com/showthread.php?t=2094113
http://forum.xda-developers.com/showthread.php?t=2189048
Credits to Mr Hofs for helping me find the links.
Click to expand...
Click to collapse
yup..its 11111111
Then you can flash any ruu basically !
Thanx guys..my phone is back to life now.
Sent from my HTC One X using xda premium
I have UK unlocked unbranded HTC m8
I converted it to a gpe device using sakitechs guide on YouTube and the gpe ruu
I didn't make a note of my original cid but renamed my cid to googl001
I want to return my phone back to how it came
I want install stock sense rom
Put s on
Relock bootloader
My device is not rooted
Please help wme with some step by step instructions on how to go back to factory device
usmanmh_10 said:
I have UK unlocked unbranded HTC m8
I converted it to a gpe device using sakitechs guide on YouTube and the gpe ruu
I didn't make a note of my original cid but renamed my cid to googl001
I want to return my phone back to how it came
I want install stock sense rom
Put s on
Relock bootloader
My device is not rooted
Please help wme with some step by step instructions on how to go back to factory device
Click to expand...
Click to collapse
Hi,
I can try to help a little bit.
To look which CID would be the correct one we can check your MID first. After you got this I can help you find a corresponding stock backup and firmware, so you are stock regarding these things.
If we accomplished this, we can go remove the "Tempered" flag, lock bootloader again and at last go S-On if ou like to.
So first steps to take are.
1) connect the phone to pc and reboot to bootloader "adb reboot bootloader"
2) have a look if you are S-Off (should be so, as you were abled to change the CID)
3) in cmd enter the comand "fastboot getvar mid"
Tell me which MID it shows to you.
With this we can check which CID is the corresponding one and search for the correct backup and FW.
Hi guyz is it possible to be on stock with a developer edition cid? and what cid is it? and how to flash it stock rom? my friend is in outdated rom 4.4.2 and its supercid and s-off I want to help him
thanks!
imfuzzyyy said:
Hi guyz is it possible to be on stock with a developer edition cid? and what cid is it? and how to flash it stock rom? my friend is in outdated rom 4.4.2 and its supercid and s-off I want to help him
thanks!
Click to expand...
Click to collapse
You can stay supercid and just run the unlocked developers RUU for a full stock conversion... He will still be able to receive OTA updates.. Post the results from "fastboot getvar all" but remove imei and serial... If your phone is gsm, download and run this file from a PC.. Takes about ten minutes to install and ten minutes to reboot... http://www.htc.com/us/support/htc-one-m8/news/ but I'd post the fastboot output to confirm before running the RUU.exe file
bford152 said:
You can stay supercid and just run the unlocked developers RUU for a full stock conversion... He will still be able to receive OTA updates.. Post the results from "fastboot getvar all" but remove imei and serial... If your phone is gsm, download and run this file from a PC.. Takes about ten minutes to install and ten minutes to reboot... http://www.htc.com/us/support/htc-one-m8/news/ but I'd post the fastboot output to confirm before running the RUU.exe file
Click to expand...
Click to collapse
i dont think it is a gsm because he runs 32gb internal maybe a carrier provider any suggestion?
and btw is this ok it is now locked bootloader do it still need to unlock again?
imfuzzyyy said:
i dont think it is a gsm because he runs 32gb internal maybe a carrier provider any suggestion?
and btw is this ok it is now locked bootloader do it still need to unlock again?
Click to expand...
Click to collapse
The phone came in 32 and 64gb on GSM, CDMA, etc.. He's S-off so unlocking the bootloader should be as simple as "fastboot oem unlock".. Still "fastboot getvar all" output is needed so we can see model number, partition size, firmware, etc
bford152 said:
The phone came in 32 and 64gb on GSM, CDMA, etc.. He's S-off so unlocking the bootloader should be as simple as "fastboot oem unlock".. Still "fastboot getvar all" output is needed so we can see model number, partition size, firmware, etc
Click to expand...
Click to collapse
i see thanks for the info will get back on this when I got he's phone so I can fix it
Dear friends,
i m using htc one m8 ul device, unlocked. i want to install indian firmware on my device, my doubt is mid and cid chage will help me? or not that's the way kindly post indian htc one m8 mid and cid details, then if i change cid and mid on my one m8, can i install indian firmware????
thans in advance.
GKFLASH81 said:
Dear friends,
i m using htc one m8 ul device, unlocked. i want to install indian firmware on my device, my doubt is mid and cid chage will help me? or not that's the way kindly post indian htc one m8 mid and cid details, then if i change cid and mid on my one m8, can i install indian firmware????
thans in advance.
Click to expand...
Click to collapse
You are S-Off, correct? Because you need to be.
All that is necessary is for you to change your CID. SuperCID is easiest. You can install any M8 firmware that way.
fastboot oem rebootRUU
fastboot oem writecid 11111111 (eight ones)
fastboot reboot-bootloader and you are done.
After that you can flash Indian firmware.