HELLO GUYS LAST NIGHT MY MOBILE NETWORK SIGNAL GONE MOBEL Lg g4 815 10H rom is lollipop now any body know how to fix this issue?
aa7590 said:
HELLO GUYS LAST NIGHT MY MOBILE NETWORK SIGNAL GONE MOBEL Lg g4 815 10H rom is lollipop now any body know how to fix this issue?
Click to expand...
Click to collapse
The only thing I can suggest is back every thing up and then a hard reset.......
i did hardest but still facing no network signals
this version Stock MM on H815
LGH815AT-00-V10H-GLOBAL-US-AUG-17-2015-ARB02 when i buy the his phone ok if u have this rom link send so i reflesh the phone
aa7590 said:
i did hardest but still facing no network signals
this version Stock MM on H815
LGH815AT-00-V10H-GLOBAL-US-AUG-17-2015-ARB02 when i buy the his phone ok if u have this rom link send so i reflesh the phone
Click to expand...
Click to collapse
Check out this OP: kdz, tot LG G4 [All Variants] (https://forum.xda-developers.com/g4/general/kdz-tot-lg-g4-variants-t3362423).
There is a link provided for the H81510h: TOT H815 10h ==>> https://www.fshare.vn/file/JCUY1W7YZTSC/
Suspect in the event your ROM hasn't become corrupted and re-installing the same version doesn't help, you may have a hardware issue.
which tool i have to use for that send the tool link also
aa7590 said:
which tool i have to use for that send the tool link also
Click to expand...
Click to collapse
You can use either of these two methods:
LGUP - NEW!!! - INSTALL KDZ - MM or LP - FACTORY RESET/UPGRADE at https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
LG Flash Tool 2014 - The best way to Flash LG KDZ Rom at https://forum.xda-developers.com/showthread.php?t=2797190
I would suggest using LGUP-NEW first as it tends to cause fewer issues.
Don't forget the Thanks button ... when you're asking for and receiving help.
You think lgup-new work with tot file ?
aa7590 said:
You think lgup-new work with tot file ?
Click to expand...
Click to collapse
As most users complain about only seeing a TOT file on the selection window in LGUP-NEW and not the KDZ they want to flash (until they read the posts and figure out how to direct to their file) I don't see why it wouldn't but, to be sure, post your question to the author of the site from the OP to get a more definitive answer. I personally have only used it to flash a KDZ file myself.
check this messagew i get u have any idea to fix
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
aa7590 said:
check this messagew i get u have any idea to fix
Click to expand...
Click to collapse
Only way is to find an H81510h file with an anti-rollback version that isn't smaller than the one you're on now. You'll have to search for it and perhaps put a request in at kdz, tot LG G4 [All Variants] (https://forum.xda-developers.com/g4/...iants-t3362423). Access your hidden menu and see what your current roll-back version is so you can be specific.
aa7590 said:
check this messagew i get u have any idea to fix
Click to expand...
Click to collapse
With tot file only use the upgrade part......
see this hidden menu of my g4 and suggest the rom whattever to solve the problem
ok see this pic of my g4 hidden menu any idea to resolve isuuse
aa7590 said:
see this hidden menu of my g4 and suggest the rom whattever to solve the problem
Click to expand...
Click to collapse
Try this one . It's Global-Com, not Global-US but worth a try from this site:
https://easy-firmware.com/index.php?a=browse&b=category&id=17241
LGH815AT-00-V10h-GLOBAL-COM-AUG-25-2015+0-TOT.rar EXCLUSIVE
Download | Size: 1369 MB | Date: 2016-11-05 11:21:26
this link need exclusive account i dont have an exclusive account if u have exlusive account kindly give the link for downloading
aa7590 said:
this link need exclusive account i dont have an exclusive account if u have exlusive account kindly give the link for downloading
Click to expand...
Click to collapse
Try from here instead: https://www.androidfilehost.com/?fid=24723757092307739
i install your given link s/w in the end lg g4 dead
aa7590 said:
i install your given link s/w in the end lg g4 dead
Click to expand...
Click to collapse
If you can still get into download mode, it's not dead. If you can get into download mode, look for the right rom for your device or try again and make sure you follow the instruction exactly . Try the other method as well to install if that doesn't work.
I've only tried to help and if you'd done your own searches you most likely would have had the issue develop at some point trying to find the right stock rom.
not going to download mode now any solution
mr patilkalpesh u gave your whatsup number to resolve issuse throgh teamviewer i aldready add you in whatsup u know that u read messages and not reply
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD:
E97520A_00.kdz
No need to open a thread for this.
BTW, this is exactly the same as other euro countries.
Nothing new on that
is this OTA or KDZ update?
is ART avaible?
OP updated with download link.
patalao said:
No need to open a thread for this.
BTW, this is exactly the same as other euro countries.
Nothing new on that
Click to expand...
Click to collapse
Yes it is the same base, but it has less bloat than in carriers builds. Also boot animation is pure LG.
alextirca said:
is this OTA or KDZ update?
Click to expand...
Click to collapse
It is kdz.
Gilbert_Sarip said:
is ART avaible?
Click to expand...
Click to collapse
No there is no ART.
Where have you found this kdz?
mordesku said:
DOWNLOAD:
E97520A_00.kdz
Click to expand...
Click to collapse
Can you make flashable .zip file in recovery of this rom?
nlooooo said:
Where have you found this kdz?
Click to expand...
Click to collapse
Using Orginal LG firmware download tool.
xamx123 said:
Can you make flashable .zip file in recovery of this rom?
Click to expand...
Click to collapse
I can try [emoji3]
Does this have knock code or we won't see it for our Optimus G?
mordesku said:
OP updated with download link.
Yes it is the same base, but it has less bloat than in carriers builds. Also boot animation is pure LG.
It is kdz.
No there is no ART.
Click to expand...
Click to collapse
For now the only career builds that were launched was Vodafone and the only thing different was the boot and shutdown animation that included the Vodafone logo.
Everything else is the same.
You could have posted this on other thread already open but that's just me saying.
I'm not criticizing but if every time a build is launched and everything is the same as others, and everyone opens threads for that then we will have many fragmented and useless threads.
Cheers
Maybe someone will find a way to activate it.
Sent from my LG-E975 using XDA Free mobile app
Great!! Can you tell me the steps to flash it?
flashed this over V20A Germany version and at the software is not saying like in the first post, EUR-XX
alextirca said:
flashed this over V20A Germany version and at the software is not saying like in the first post, EUR-XX
Click to expand...
Click to collapse
Flashed over Vodafone Italy and all like in the OP.
What method did you guys used to flash this file to your phone?i am on stuck 4.1.2 and i can't really choose wich one can be the best for me...and the easiest...thx in advance...have a nice weekend!
galbe90 said:
What method did you guys used to flash this file to your phone?i am on stuck 4.1.2 and i can't really choose wich one can be the best for me...and the easiest...thx in advance...have a nice weekend!
Click to expand...
Click to collapse
I used method from this thread http://forum.xda-developers.com/optimus-g-intl/general/share-kdz-flash-tool-2014-100-kitkat-t2806952
Can I flash this ROM on my Brazilian LG-E977 phone? If so, I'm currently using CWM 11 M8, do I need to get to stock JB first? I have backup of EFS (3 .img files) + flashable modem.
Hi,
I just updated my brothers Optimus G E975 with this firmware and it works like a charm. And this is also the first time I encountered flashing an LG phone, so I am kind of a newbie, here . I did it by folowing this (http://forum.xda-developers.com/showthread.php?t=2797190&highlight=root) metodh. And in that thread there is a debate about red ROOTED signal in download mode after using that tool on G2, something like samsung flash counter on SGS2 if I am correct? Anyway, I am wondering does this affect Optimus G too? Because I wouldn't like to have any problems if I ever had to take that phone to service centre.
Sorry for bad english and thanks for help.
SEK610i said:
Hi,
I just updated my brothers Optimus G E975 with this firmware and it works like a charm. And this is also the first time I encountered flashing an LG phone, so I am kind of a newbie, here . I did it by folowing this (http://forum.xda-developers.com/showthread.php?t=2797190&highlight=root) metodh. And in that thread there is a debate about red ROOTED signal in download mode after using that tool on G2, something like samsung flash counter on SGS2 if I am correct? Anyway, I am wondering does this affect Optimus G too? Because I wouldn't like to have any problems if I ever had to take that phone to service centre.
Sorry for bad english and thanks for help.
Click to expand...
Click to collapse
Hi,
I read somewhere that optimus g hasn't any flash counter. I send my g to service cause radio error. G was flashed several times and before sendig to service just reverted to stock via kdz flash. They send me back my phone with new mainboard. So i think they can't check how many times you flash it.
mordesku said:
DOWNLOAD:
E97520A_00.kdz
Click to expand...
Click to collapse
Which country kdz it is...???
Sent from my LG-E975 powering Stock 4.4.2 & SOLID Kernel
I had rooted KitKat on G3. So i tried to unroot it and go back to stock using Lgflash tool. During the process, lgflashtool is now stuck at 6% saying "change partition fail". In device manager ,my PC detects it as "LGE Mobille USB serial Port".
I have tried ADB .but it always show no device.
Please help me. :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
P.S . direct link for images
https://s31.postimg.org/o27f1bo6z/Capture.jpg
https://s32.postimg.org/j7xzczlwl/20160620_012526.jpg
Same did you fixed it ?
Still struggling...hoping someone will help us.
Jahanzaibawan said:
Still struggling...hoping someone will help us.
Click to expand...
Click to collapse
I judt discovered than mine has a d851 motherboatd
a bricked lg g2 said:
I judt discovered than mine has a d851 motherboatd
Click to expand...
Click to collapse
Your bricked use this guide. http://www.gsmhosting.co/how-to-har...variants-fix-qhsusb-bulk-_-qualcomm-9008.html its the same as the one on xda.
a bricked lg g2 said:
I judt discovered than mine has a d851 motherboatd
Click to expand...
Click to collapse
It means I don't have d855 board.right?.do I have to guess and flash some other carrier Rom?But my IMEI number shows it is d855.
netookska05 said:
Your bricked use this guide. http://www.gsmhosting.co/how-to-har...variants-fix-qhsusb-bulk-_-qualcomm-9008.html its the same as the one on xda.
Click to expand...
Click to collapse
Mine is already in download mode.is it necessary to go with the above guide you provided .?
Some times this can happen due to incompatibility of LG flash tool. You may need to try the same process on a pc running different Windows (Windows 7 32 bit will be great).
If you still have no result then you can also try the process with LGUP tool.
dksoni411 said:
Some times this can happen due to incompatibility of LG flash tool. You may need to try the same process on a pc running different Windows (Windows 7 32 bit will be great).
If you still have no result then you can also try the process with LGUP tool.
Click to expand...
Click to collapse
what dll you used..i have also this problem i have d855 model and when i switch on my phone it automatic in downloading mode ...i have tried (LGD855_20140526_LGFLASHv160.dll) with (D855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0.tot) beacause i dont know what is mobile software version
Honkong,Europe,Taiwan So i choose Europe version......... but when i flashing it stucks on 6% and downlod FAIL../////
PLEASE HELP
Jahanzaibawan said:
Mine is already in download mode.is it necessary to go with the above guide you provided .?
Click to expand...
Click to collapse
You shouldn't have to use the guide I first posted since your phone is recognized. If you flashed wrong rom with the lgtool will report that model which is incorrect. Take off the battery cover and look around the phone so you have the correct model for your phone and download that kdz. You can use this guide to help. Use the first part.
http://forum.xda-developers.com/showthread.php?t=2785089
Jahanzaibawan said:
Mine is already in download mode.is it necessary to go with the above guide you provided .?
Click to expand...
Click to collapse
hai bro please tell me that what version of tot you installed in your lg g3 d885
like honkkong,europe,taiwan because i have installed europe version and successfully installed but my radio/modem is not working.........please tell me the version of model in which sim should work in india////
Shivam1754 said:
hai bro please tell me that what version of tot you installed in your lg g3 d885
like honkkong,europe,taiwan because i have installed europe version and successfully installed but my radio/modem is not working.........please tell me the version of model in which sim should work in india////
Click to expand...
Click to collapse
Unfortunately I opened up my phone and found that my board is replaced with D850. So i flashed D850 tot file.
For you , just flash Europe . If it ends in success.You have flashed the correct tot file. for FM, try to find that your hardware is in working condition.Otherwise just go without FM.
The same here. need a fix please.
a bricked lg g2 said:
I judt discovered than mine has a d851 motherboatd
Click to expand...
Click to collapse
Did you find any fix to your problem? I got the same: stuck at firmware update screen 0% and find out that mine have a D851 chip instead of D855 .
Richxrd21 said:
Did you find any fix to your problem? I got the same: stuck at firmware update screen 0% and find out that mine have a D851 chip instead of D855 .
Click to expand...
Click to collapse
Yes i fixed it
a bricked lg g2 said:
Yes i fixed it
Click to expand...
Click to collapse
How did you do that? I need it 'cuz I bought my "new D855" through Amazon and came rooted. Trying to fix this, it stuck on firmware update screen and after many times I tried I can't get it out of there. Please help me.
Richxrd21 said:
How did you do that? I need it 'cuz I bought my "new D855" through Amazon and came rooted. Trying to fix this, it stuck on firmware update screen and after many times I tried I can't get it out of there. Please help me.
Click to expand...
Click to collapse
Yes no prob so first you have to download the d851 tot file and the genetic dll and then come here again i will tell you the next step
Richxrd21 said:
How did you do that? I need it 'cuz I bought my "new D855" through Amazon and came rooted. Trying to fix this, it stuck on firmware update screen and after many times I tried I can't get it out of there. Please help me.
Click to expand...
Click to collapse
Or contact me on my facebook
Richxrd21 said:
Did you find any fix to your problem? I got the same: stuck at firmware update screen 0% and find out that mine have a D851 chip instead of D855 .
Click to expand...
Click to collapse
Use dll that is supposed to be compatible with d851.
hi i have an lg g4 h815T model its running on android lollipop 5.1... i want it upgraded to marshmallow... problem is there's no option for OTA update in about phone its running stock.. i want to get it to marshmallow ... phone is rooted(it was when i bought it used) rest i knw nothing... i can learn .... i have used Motorola razer n spyder rom n stuff before...
i just need right rom or kdz file linked please
any help would b appreciated
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
Plug your phone to your PC, and start LG Bridge to check for update.
LG Up also works, but you'll have to find a corresponding KDZ( not that easy )
valest said:
Plug your phone to your PC, and start LG Bridge to check for update.
LG Up also works, but you'll have to find a corresponding KDZ( not that easy )
Click to expand...
Click to collapse
links please .....
can i flash kdz of another variant like 815..???
thanks
any one?//
dumb_question said:
links please .....
can i flash kdz of another variant like 815..???
thanks
Click to expand...
Click to collapse
Get LG Bridge from here: www.lg.com/hk_en/support/support-mobile/lg-H815T
Don't flash other variant‘s KDZ，or you’ll risk BRICK your device or get a null IMEI
H815T is not a common device and there're HK version and AUS version,use LG Bridge for safe.
Ok thank you... One last question Can i use cyanogen mod rom?? If yes which one?? I will b greatly in debt
dumb_question said:
Ok thank you... One last question Can i use cyanogen mod rom?? If yes which one?? I will b greatly in debt
Click to expand...
Click to collapse
no i think your phone cant be bootloader unlocked.
you cant root MM only LP thats why you had it rooted.
LP and MM system is different and on LP there was a hole that you could xploit it to rooted this changed on MM. in blocked.
so only in LP can be rooted with locked bootloader. wich am 100% your phone is. also if you plan to go back to LP make sure to know wich antirollback you are because different antirollback hard bricks phone..
still haven't managed to update mm... update file downloaded (1.67 gig~..too slow connection 4 hr to download this file) it started updating went to 9% than phone restarts into download mode and error pops up in bridge saying report recover error
can i download the update manually AND install it because stock downloader takes too long (normal downloading @150~200 kbs/s when my peak connection speed is 500~600 kbs/s)
update ** now my phone doesn't show up on my laptop anymore ****
dumb_question said:
update ** now my phone doesn't show up on my laptop anymore ****
Click to expand...
Click to collapse
yes you need to download the correct KDZ for it. i feel you i have 100kb connection. it took me all night to download ..
thats not good . can you enter sownload mode .. press vol up and connect usb. ?
raptorddd said:
yes you need to download the correct KDZ for it. i feel you i have 100kb connection. it took me all night to download ..
thats not good . can you enter sownload mode .. press vol up and connect usb. ?
Click to expand...
Click to collapse
which kdz file can u point me to it
please
dumb_question said:
which kdz file can u point me to it
please
Click to expand...
Click to collapse
i do not know wich one. i dont know what h815p stands for. what country.
heres the list am not responsable if download wrong file. is better to ask someone else.
http://storagecow.eu/index.php?dir=Xda/LG+G4/
ASK IN THIS THREAD... good luck.
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
raptorddd said:
i do not know wich one. i dont know what h815p stands for. what country.
heres the list am not responsable if download wrong file. is better to ask someone else.
http://storagecow.eu/index.php?dir=Xda/LG+G4/
ASK IN THIS THREAD... good luck.
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Click to expand...
Click to collapse
THANKS
LG BRIDGE SAYS DOWNLOADING: H81520g 8.12.16
I installed the LG G4 phone stock rom. The phone is working. The LED is on. The opening sound is coming up. But the screen does not open. (The battery screen appears when I pull the battery out only when USB is connected.) .
I can get a download mod. But no screen.
I guess I install the wrong KDZ.
I do not know my phone model. (H815,H818,H811 i dont know )
I'm waiting for your help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Previous İnstallled ROM)
You have the H815 version. Simply download the .kdz file and use the LGUP program. I did this when I thought my phone was bricked
WAIDroid said:
You have the H815 version. Simply download the .kdz file and use the LGUP program. I did this when I thought my phone was bricked
Click to expand...
Click to collapse
I already installed version h815. But screen not open.
99sago99 said:
I already installed version h815. But screen not open.
Click to expand...
Click to collapse
Hmm try to do it again or then try to replace it
Edit: What were you doing before this happened?
WAIDroid said:
Hmm try to do it again or then try to replace it
Edit: What were you doing before this happened?
Click to expand...
Click to collapse
I tried it again but it does not.
I wanted to install the stock rom again, but it did not.
Same problem!!
first i had ILAPO problem after upgrading...i used a method of disabling big cores but i had to choose TOT for H818 since TOT for H815 didn't work...now my phone has changed from
815 to 818 but whenever i try to boot it i get a blackscreen thou i can hear it booting...then after searching my IMEI info i found it is F500S i am a bit confused on what to do now!!
In what way did try? Usually you just put the Phone into Download Mode (If you install LGUP and Drivers Correctly the Program should do it for you *If you have your phone connected Normally with your PC) what happens when you connect via PC?
Go HERE to DL LP and Drivers
WAIDroid said:
In what way did try? Usually you just put the Phone into Download Mode (If you install LGUP and Drivers Correctly the Program should do it for you *If you have your phone connected Normally with your PC) what happens when you connect via PC?
Go HERE to DL LP and Drivers
Click to expand...
Click to collapse
My Phone Connected Normally and Download Mod but screen not come
If it connects and the program sees the phone then by installing the right stock image should fix but if not then a replacement is needed
Can you give me the link to the right kdz?
WAIDroid said:
If it connects and the program sees the phone then by installing the right stock image should fix but if not then a replacement is needed
Click to expand...
Click to collapse
Can you give me the link to the right kdz?
I'm sorry but you may have to ask around some Tech type of guy to know what lg g4 you *Actually have meaning the Rom type
WAIDroid said:
I'm sorry but you may have to ask around some Tech type of guy to know what lg g4 you *Actually have meaning the Rom type
Click to expand...
Click to collapse
How will I do that :crying:
99sago99 said:
How will I do that :crying:
Click to expand...
Click to collapse
Look HERE and read carefully
99sago99 said:
I installed the LG G4 phone stock rom. The phone is working. The LED is on. The opening sound is coming up. But the screen does not open. (The battery screen appears when I pull the battery out only when USB is connected.) .
I can get a download mod. But no screen.
I guess I install the wrong KDZ.
I do not know my phone model. (H815,H818,H811 i dont know )
I'm waiting for your help
(Previous İnstallled ROM)
Click to expand...
Click to collapse
did you get any solutions??? if you get, please help me to.
ihr3.1416 said:
did you get any solutions??? if you get, please help me to.
Click to expand...
Click to collapse
yes man follow my post here https://forum.xda-developers.com/g4/help/lg-g4-f500-unbrick-display-flashing-t3562967#post71318992
---------- Post added at 10:25 AM ---------- Previous post was at 10:22 AM ----------
yes man same happens with me actually it is f500l refurbish model motherboard is f500l and i also flash wrong kdz my model is same as you follow my guide here https://forum.xda-developers.com/g4/help/lg-g4-f500-unbrick-display-flashing-t3562967#post71318992 you will get your phone back..
---------- Post added at 10:27 AM ---------- Previous post was at 10:25 AM ----------
ihr3.1416 said:
did you get any solutions??? if you get, please help me to.
Click to expand...
Click to collapse
yes man you can revive it. Follow my post here https://forum.xda-developers.com/g4/help/lg-g4-f500-unbrick-display-flashing-t3562967#post71318992
---------- Post added at 10:38 AM ---------- Previous post was at 10:27 AM ----------
sizzle05 said:
first i had ILAPO problem after upgrading...i used a method of disabling big cores but i had to choose TOT for H818 since TOT for H815 didn't work...now my phone has changed from
815 to 818 but whenever i try to boot it i get a blackscreen thou i can hear it booting...then after searching my IMEI info i found it is F500S i am a bit confused on what to do now!!
Click to expand...
Click to collapse
yes man same happens with me actually it is f500l refurbish model motherboard is f500l and i also flash wrong kdz my model is same as you follow my guide here https://forum.xda-developers.com/g4/...7#post71318992 you will get your phone back..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
via https://www.mylgphones.com/download-lg-flash-tool-2025-for-lg-v30-lg-g6.html
Thanks but how do we get the mega lock software?
need DLL model too for flash using LG Flash Tool and DLL is different from that used for LGUP
Hope this thread has no Paid Requests....
I think this is outdated and people should use LGUP. To download your firmware you can plug your phone into LG Bridge and click on error recovery. It fails on download for me but if it doesn't then it'll download it there for you. Otherwise you can fake your User Agent with a chrome extension and look at the LG Bridge log for the link to download the firmware. As for the LGUP dll you can use a kdz extractor to retrieve it from your downloaded kdz. I can provide links later on the details if people want to know, I'm just not at my PC at the moment. Also not sure if your carrier has released the update but @op theres a new h update for H933 for most carriers.
The Elite said:
I think this is outdated and people should use LGUP. To download your firmware you can plug your phone into LG Bridge and click on error recovery. It fails on download for me but if it doesn't then it'll download it there for you. Otherwise you can fake your User Agent with a chrome extension and look at the LG Bridge log for the link to download the firmware. As for the LGUP dll you can use a kdz extractor to retrieve it from your downloaded kdz.
Click to expand...
Click to collapse
all of us... know about this but we will be able to use this tool too...
stu5797 said:
Thanks but how do we get the mega lock software?
Click to expand...
Click to collapse
It is a USB hardware (Megalock)
lg up 1.15 or above is needed
The Elite said:
I think this is outdated and people should use LGUP. To download your firmware you can plug your phone into LG Bridge and click on error recovery. It fails on download for me but if it doesn't then it'll download it there for you. Otherwise you can fake your User Agent with a chrome extension and look at the LG Bridge log for the link to download the firmware. As for the LGUP dll you can use a kdz extractor to retrieve it from your downloaded kdz. I can provide links later on the details if people want to know, I'm just not at my PC at the moment. Also not sure if your carrier has released the update but @op theres a new h update for H933 for most carriers.
Click to expand...
Click to collapse
lg up 1.15 or above is needed when flashing kdz firmware on LG V30
so is there any way to flash kdz on v30?
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
UPPERCUT is working! Just downgraded my H930 from V10v down to V10f
Nice
Mr. Schnabel said:
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
UPPERCUT is working! Just downgraded my H930 from V10v down to V10f
Click to expand...
Click to collapse
LG UP 1.4 and Uppercut?
asialove2013 said:
LG UP 1.4 and Uppercut?
Click to expand...
Click to collapse
Yes, upgrade worked for me refurbish gave an error.
From v10v down to v10f, back to v and then back to f no problem flashing
Sent from my LG-H930 using XDA-Developers Legacy app
I can not run it. Message is "Can not run this program". What can I do?
I need to help...
Mr. Schnabel said:
Yes, upgrade worked for me refurbish gave an error.
From v10v down to v10f, back to v and then back to f no problem flashing
Sent from my LG-H930 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Hi
Where i can get latest kdz file for H930?
Thanks
Hi everyone, is there a specific guide to install a lg v30 + firmware? And the links for the necessary files? Thanks
I would need to install a no brand firmware
asialove2013 said:
LG UP 1.4 and Uppercut?
Click to expand...
Click to collapse
Yep. I upgrade from 10e to 10v with LG UP and Uppercut.
upgrade to Android 8
Dizzyrul3z said:
Yep. I upgrade from 10e to 10v with LG UP and Uppercut.
Click to expand...
Click to collapse
When i try to upgrade the v300s to android 8.0 by flashing the kdz file, LG UP 1.14 does not work.
Install everything from uppercut thread. After installing open uppercut.exe, it will show lgup. Select .kdz and upgrade then start. It will boot the phone to downloadmode by itself.
I think I've got Uppercut working in a virtual windows machine. Does anyone know where I can find a EU KDZ firmware to flash for my H930? (I'm soft bricked)
egendomligt said:
I think I've got Uppercut working in a virtual windows machine. Does anyone know where I can find a EU KDZ firmware to flash for my H930? (I'm soft bricked)
Click to expand...
Click to collapse
Here is 10f: https://drive.google.com/file/d/1s_nZmLOnzUcgKspEQ-eISyOu9i4ZAheh/view
Dizzyrul3z said:
Here is 10f: https://drive.google.com/file/d/1s_nZmLOnzUcgKspEQ-eISyOu9i4ZAheh/view
Click to expand...
Click to collapse
Thank you! It flashed fine, accoring to LGUP. But the phone still won't boot. It's stuck on the "LG V30" screen... Wth do I do now..?