Good Morning Everyone,
I encountered a very weird issue last night after updating my table to 5.1.1 official. For the longest time, I was running the AOSP rom for 605 on my 607T. I was able to access Data and Wifi with no issues.
Last night, I rebooted to twrp, wiped my system and cache and internal storage.
Through Odin 3.07 - I flashed the factory firmware for 5.1.1.
Phone booted up and told me there was no Sim and would not allow the wifi option to be turned on because there was no sim. I thought this was strange as I have used it before on wifi when there actually was no sim card present. I pulled the sim out and put it back in - voila, i have wifi again. My Data connection kept the X through the bars though. I figured it must be something with the APN. I go to the APN Section and get a messages that this user (verified im set as the owner and only user) is not authorized to view APNs. I figured I would just create a new one - which I did and saved it. It would not even show the new one I made.
I ran into a similar lack of Sim visibility before when I first flashed 4.4.4 after running on an AOSP rom. I ended up flashing back to AOSP.
Has anyone else encountered this?
Reflash and try again, there was some mention of Data/Wifi errors. Also was the factory firmware for the 605 or the 607T? If 605 just flash the 607T firmware and you should be fine.
HermitDash said:
Reflash and try again, there was some mention of Data/Wifi errors. Also was the factory firmware for the 605 or the 607T? If 605 just flash the 607T firmware and you should be fine.
Click to expand...
Click to collapse
I flashed factory firmware for the 607T.
Going to try and reflash this afternoon when I get home from work and will follow up.
LOL I just read through the 605 thread -
http://forum.xda-developers.com/showpost.php?p=63147588&postcount=75
Looks like if you come from a custom rom - a double flash is required period. Glad I didn't actually set up my device last night.
Figured I would update for anyone who runs into this. Reflash did not work. Wiped everything and flashed a third time - no dice. I flashed back to 4.4.2 original factory image and used smart switch to upgrade back to 5.1.1
Hi all,
Am running a Galaxy S5 (klte) which I'd been using CM13 on without problem. I moved over to Lineage at the weekend - full factory reset, clear cache/Dalvik, use latest TWRP to install Lineage and re-install everything. So Saturday, Sunday, Monday everything fine. Then switch the phone off overnight (as I had done on the other nights) and switch back on this morning. The phone boots fine, no sign of any issues - but I don't get my usual "Enter your SIM PIN" screen, it boots straight to the desktop.
Can't access anything to do with phone functions and the signal icon sits as a triangle but hollow, a bit like when you get zero signal strength... it's not the SIM card with a line through it (no SIM card) icon, which is odd. Trying to access settings to select a network, or go for auto network detection draws a blank (can't access SIM card/network).
I've gone back into TWRP and cleared the cache and Dalvik again and the problem persists. I took the latest nightly (2017-02-13) and flashed that hoping it might fix it, but also no joy.
Any ideas without me having to factory reset the device and re-install everything again (pain!)
Thanks,
adamchap said:
Hi all,
Am running a Galaxy S5 (klte) which I'd been using CM13 on without problem. I moved over to Lineage at the weekend - full factory reset, clear cache/Dalvik, use latest TWRP to install Lineage and re-install everything. So Saturday, Sunday, Monday everything fine. Then switch the phone off overnight (as I had done on the other nights) and switch back on this morning. The phone boots fine, no sign of any issues - but I don't get my usual "Enter your SIM PIN" screen, it boots straight to the desktop.
Can't access anything to do with phone functions and the signal icon sits as a triangle but hollow, a bit like when you get zero signal strength... it's not the SIM card with a line through it (no SIM card) icon, which is odd. Trying to access settings to select a network, or go for auto network detection draws a blank (can't access SIM card/network).
I've gone back into TWRP and cleared the cache and Dalvik again and the problem persists. I took the latest nightly (2017-02-13) and flashed that hoping it might fix it, but also no joy.
Any ideas without me having to factory reset the device and re-install everything again (pain!)
Thanks,
Click to expand...
Click to collapse
I had this before as well. I was able to fix it using the correct modem and bootloader software. After this, it worked fine until I did a restore with TWRP. All restored but the modem was not working. I discovered a ADB command to easily fix it but I lost the bookmark for this page. ATM I am looking for this command. Something like "ADB SHELL /AUTO ....."
If you find it, please post it here. I do as well.
Regards, Gopher.
Solved not solved
Well I've been playing around a bit more testing to find exactly what it is causing this issue.
It's system profiles. I use these extensively with triggers so my phone connects to my car, goes on vibrate at work etc. With system profiles active (whole menu turned on) the issue occurs. With the profiles off, it's resolved. It does matter how the profiles are configured (I tested with just 1 profile and all settings on "do not change").
So this is something for the Lineage OS team to look at and fix in a later build because as it stands system profiles are broken, at least for klte. Does anyone else have a different experience on their device and what device are you using?
Thanks! It worked!
adamchap said:
Well I've been playing around a bit more testing to find exactly what it is causing this issue.
It's system profiles. I use these extensively with triggers so my phone connects to my car, goes on vibrate at work etc. With system profiles active (whole menu turned on) the issue occurs. With the profiles off, it's resolved. It does matter how the profiles are configured (I tested with just 1 profile and all settings on "do not change").
So this is something for the Lineage OS team to look at and fix in a later build because as it stands system profiles are broken, at least for klte. Does anyone else have a different experience on their device and what device are you using?
Click to expand...
Click to collapse
In my case I only had to turn off the whole System Profiles general button.
Same for me
I have done exactly as the first post and my sim is also not working now when it was fine. I have a Galaxy s3 i9305 lte. It's just says no sim. I have Lineage 14.1 and have updated to the latest nightly. Any ideas how to get my sim working again?
adamchap said:
Well I've been playing around a bit more testing to find exactly what it is causing this issue.
It's system profiles. I use these extensively with triggers so my phone connects to my car, goes on vibrate at work etc. With system profiles active (whole menu turned on) the issue occurs. With the profiles off, it's resolved. It does matter how the profiles are configured (I tested with just 1 profile and all settings on "do not change").
So this is something for the Lineage OS team to look at and fix in a later build because as it stands system profiles are broken, at least for klte. Does anyone else have a different experience on their device and what device are you using?
Click to expand...
Click to collapse
Same problem here and i don't use profiles Galaxy S4
adamchap said:
Well I've been playing around a bit more testing to find exactly what it is causing this issue.
It's system profiles. I use these extensively with triggers so my phone connects to my car, goes on vibrate at work etc. With system profiles active (whole menu turned on) the issue occurs. With the profiles off, it's resolved. It does matter how the profiles are configured (I tested with just 1 profile and all settings on "do not change").
So this is something for the Lineage OS team to look at and fix in a later build because as it stands system profiles are broken, at least for klte. Does anyone else have a different experience on their device and what device are you using?
Click to expand...
Click to collapse
On my S4 Mini LTE the profiles seem to sometimes stop the home button (long press) pulling up last apps used even though the button works fine as two quick presses gives me split screen. I think it's automotive profile that activates when it connects to my car Bluetooth that is the cause, but not sure as haven't had chance to pull a log.
Same here on Motorola Moto E XT1021, tried getting CyanogenMod 13, but all the mirrors are down and I don't feel like getting Android from not trusted source.
It's definitely a problem with the ROM because everything works fine on different ROMs, but on Lineage there is no SIM card detection at all and nothing seems to help.
I'm trying to get older Lineage ROM hoping it will work.
Consider removing and reassigning the PIN
Mikeyb2k said:
I have done exactly as the first post and my sim is also not working now when it was fine. I have a Galaxy s3 i9305 lte. It's just says no sim. I have Lineage 14.1 and have updated to the latest nightly. Any ideas how to get my sim working again?
Click to expand...
Click to collapse
What software was on the phone you first locked your SIM in?
Sometimes a SIM will respond to a config file that might be absent when you flash a new ROM.
If you can put your SIM in a different device that recognizes it, use that device to disable the PIN.
Then power down and eject it.
Then, re-insert it into the problem device to see if it works.
If it does, re-assign a PIN using that device.
Hey. Yeah that sounds like a good thing to try although I removed Lineage and have a stock KitKat rom now and works faultlessly. Still have root access and the s3 doesn't need a later version really. Tbh I would have been happy staying on kk if it wasn't for the tech industry moving forward with their software development! How dare they!
adamchap said:
Well I've been playing around a bit more testing to find exactly what it is causing this issue.
It's system profiles. I use these extensively with triggers so my phone connects to my car, goes on vibrate at work etc. With system profiles active (whole menu turned on) the issue occurs. With the profiles off, it's resolved. It does matter how the profiles are configured (I tested with just 1 profile and all settings on "do not change").
So this is something for the Lineage OS team to look at and fix in a later build because as it stands system profiles are broken, at least for klte. Does anyone else have a different experience on their device and what device are you using?
Click to expand...
Click to collapse
The trick with disabling the profiles works nicely on my Xperia T with the CM based Resurrection Remix ROM, android version 7.1.2.
XT has no main Profiles button, so i deleted all the profiles manually and restarted the phone. Now trying to find out which profile caused the problem.
.....
Made several new profiles, restarted the phone after each one, but the problem didn't turn back. I think it has issues only with the built-in profiles.
Thanks for the tip man!:good:
Single Sim Working Dual Sim Not
In my case when I remove both the sims and put in only one at a time regardless which slot or which sim it works but when I put two in together it doesn't, driving me to believe that the lineage is not supporting dual sim and is failing hence when both are inserted.
I am running Lineage OS 15 on my S7, and other than a few glitches, the SIM card issue is the only significant problem I have experienced. I have looked through the settings, and I found out that my baseband version is "Unknown." I tried flashing some files, in an attempt to fix it, but I still have no luck. I hope someone fixes this problem.
Hope this helps...
adamchap said:
Hi all,
Am running a Galaxy S5 (klte) which I'd been using CM13 on without problem. I moved over to Lineage at the weekend - full factory reset, clear cache/Dalvik, use latest TWRP to install Lineage and re-install everything. So Saturday, Sunday, Monday everything fine. Then switch the phone off overnight (as I had done on the other nights) and switch back on this morning. The phone boots fine, no sign of any issues - but I don't get my usual "Enter your SIM PIN" screen, it boots straight to the desktop.
Can't access anything to do with phone functions and the signal icon sits as a triangle but hollow, a bit like when you get zero signal strength... it's not the SIM card with a line through it (no SIM card) icon, which is odd. Trying to access settings to select a network, or go for auto network detection draws a blank (can't access SIM card/network).
I've gone back into TWRP and cleared the cache and Dalvik again and the problem persists. I took the latest nightly (2017-02-13) and flashed that hoping it might fix it, but also no joy.
Any ideas without me having to factory reset the device and re-install everything again (pain!)
Thanks,
Click to expand...
Click to collapse
On the latest Lineage build, I was having the issue with it not reading my SIM, so here's what I did:
-clean install of lineageOS (wipe, install rom, install gapps, and install Kernel)
It wouldn't read my SIM at this point, so I
-factory reset
-installed LG G3 Tekcafe VS985-49A_stock (I'm sure any rom would have worked though)
-installed Lineage over top of this rom and wallah! everything works great!
Download and flash this if you have sim card problem https://forum.xda-developers.com/ga...om-xperia-source-project-galaxy-core-t3616744
Please go to this thread : LINK
No access to sim card contacts
Hi all, first sorry for my english, is not my home lenguage, i have an samsung galaxy s5 SM-G900T with custom room lineage-14.1-20180309-nightly-klte-signed.zip, all fine at the moment, except that i can't wiew my contacts stored in sim card and i can't save new contacts in the sim either, any body have a solution for this issue?. Regards.
It's gapps...
Hola!
I am experiencing the same issue and I relate it to the gapps.
The sim works perfectly fine with normal lineage OS. With gapps the sim doesn't work. Reproduced 3 times.
Hello, I'm using a Grand Prime SM-G530H phone with LineageOS 16.0, and here it says, no SIM card but I have a card running normally, I uninstalled Lineage and installed the stock rom, and it normally worked the SIM card, but when I installed it back Lineage continued the same error, what can be ???
My Galaxy S5 somehow detects a Sim Card which is not even inserted. The signal strength showed at the screen is the same as the wifi strength, but never at zero. But if I try to call someone it says no sim card detected. Of course boy there isn't. The problem is that inserting the sim card changes nothing. Same Problem. I switched from lineage to the original firmware back... HELP
Hi everyone! I am new here in XDA Developers.
I have been snooping around since 1 year ago or so, and I found this site when I hard bricked my phone.
Well, let's start the story:
I bought an used Moto Z Play from a friend, excellent phone, 10/10 functions and aesthetics.
Once i had the phone in my hands I wanted to ROOT it, because I wanted to hack games and stuff. The phone was in Android 8.0 (Oreo), but since there was no root for my phone and OS, y proceeded to search the latest OS that could be rooted. I found out that it was the android 7.1, I think. Well, since I wanted a "clean" installation in my phone I downloaded the original ROM, and wanted to update it like many people do, via OTA. I installed 6.0 (since it is it's original ROM, from factory), all good. The update notification showed up, I accepted; it updated to 6.1 or sth, then the 7.0 update, updated, AND finally came the 7.1. Once I updated, it bricked. HARD BRICKED. I panicked, since I wanted to give away this phone to my dad. I found out that I needed a blankflash. I searched through a lot of forums, some even in russian, and chinese. I found out and accepted that the blankflash for the android 8.0 never came out. I gave up.
Since then, I learned that I MUST NEVER UPDATE VIA OTA. I learned it the hard way. I'm sorry for my stupidness.
Then I bought another motherboard from another Moto Z Play. I installed it and discovered that the ROM wasn't STOCK. That's because when I turned on the phone it started in bootloader everytime. The new motherboard came with Android 8.0 (Oreo) but I'm sure that it is a custom rom.
Well, the phone is now working perfect, but NOW, I have a problem.
I want to use 2 SIM cards in it. The first SIM card works fine, calls, mobile data, Wi-Fi... everything is good.
BUT the second one, from a different service provider, does not work. I inquired and found out that it was a problem because my phone wasn't, apparently, unlocked for other providers. I tested the SIM card with other phone, it worked. In the Moto Z Play, I saw that the APN info was correct, it detected all the info, but could not make calls, no mobile data. Wi-Fi was good though. The SIM card is fine, but the phone is locked.
I need the IMEI, MY IMEI, lol, but it is a problem. I tried calling to *#06#, the message shows
┐
IMEI
0
└
and in the settings -> system -> about phone -> status -> IMEI info, it shows nothing, BLANK!!!
that's why I think it is a custom room, and I have a problem.
The phone works fine with the first SIM card though, and I really like it. But I wabt to use the other one too.
My question is, should I install another ROM in the phone? I'm very afraid that it could HARD BRICK AGAIN.
What do you guys recommend? Should I try it or leave like this?
Now I don't really care if I can ROOT the device or not, I just want it to be functional and solve the "unlock line providers" problem. It could be fine with the 8.0 oreo or 9.0 pie, I don't mind, although I saw in other forums that I should not downgrade again, even if my phone has a custom rom and the new one is custom as well, so, i think the 9.0 pie could be good, but the oreo 8.0 is fine as well.
A guy in another forum could recover his IMEI with a somehow, interesting, process.
I will try to translate it since the original is in spanish:
┐
I experimented with several ROMs, and I tested one with android 9, the name is "The XPerience Project", but the Wi-Fi didn't work, so I decided to go back to the Stock one. I tried a multime times and days to restore my IMEI, but I failed at all. I decided to try another custom rom with android 9. I noticed that this one had the IMEI and it worked perfectly. An idead popped out of my head: a backup. In test mode, I entered in recovery mode and make a security backup of the MODEM and EFS folders in a MicroSD. Once the process finished, I instaled the stock rom agin in my device. Once it started, it had the same problem: the IMEI was 0 and had no signal. I installed the recovery TWRP again and made a restoration of the backup thet I saved in the microSD. The MODEM folder could not be restored (it showed an error), but the EFS was restored. I started the device once more and it automatically foun the signal and the IMEI number was re-established. My Moto Z Play is DualSim, version XT1635-02. I hope that I could help with my solution. Cheers!
└
My Moto version is the same: XT1635-02
Has anyone recovered their IMEI?
If someone could tell me what should I do, I would be very thankful.
Cheers! :highfive::highfive::highfive:
Hey All,
So I've had issues with my phone where I rooted it and messed it up to the point where it no longer registered on any networks (tried several providers here in the UK). A few days back trying to get it up and running I managed to get it registered on the network (this after reloading various software versions, some failing some not). After powering it off and back on again with my primary sim, I was back to no network (I have two A70s). Swapped SIMS back (powered phone off) and again, no network.
This morning, I started again (Installing TWRP and was planning to root again):
- Flashed stock firmware using ODIN.
- Unlocked bootloader.
- Flashed vbmeta.tar (v3.3.1-5 from Grarak).
- Rebooted, wiped data/cache
- Rebooted, started going through the setup and noticed it was on the network! (have not flashed TWRP recovery).
I'm reluctant to power off again and wondered if there's anything I can do now whilst it's working and registered, making calls etc. The reason being, I've got 5 days before I can return the other A70, if not, I'll be stuck with 3 O2 contracts
Besides the usual backup (Google/Samsung/) - is there anything I should do via ADB? It's not rooted and TWRP is not installed, I've literally just flashed vbmeta.tar from Grarak's TWRP post....
did you try installing a custom rom. i am on havoc os n i own A70FN. i believe havoc works on A70F/FN/Q. the only issue it has is of fingerprint and volte but since i don't lock my phone that's not a problem for me.
other than that the rom is stable no reboots no crashes or anything. so maybe try a custom rom just make sure ur model is supported. n besides even if u r afraid of rebooting there's bound to be a day that the phone would need a reboot.
So i say go ahead root it, install a custom rom.
also i remember having this sim issue myself. my sim worked in all the sets at my home except the A70.
i had to get a new sim n it just started working.
Try some other sim in your A70.
Also rooting shouldn't cause such a problem. from my experience i believe its something else.
i have rooted several phones n never got a network issue. i even messed up the the rooting process on the A70 n either ended up with a bootloop or occasional system crash but no network issue
Hi everyone,
I´ve just installed LineageOS with some problems.
Nearls everything works fine. This OS is great. But...
I can´t use the telefon app because ist says "kein dienst verfügbar" what means
no service by vodafone availble. flight mode is off. WIFI works propperly.
SIM Card Data was read properly. I can see the right data and settings e.g. APN; provider and so.
Basebandversion: 1311-2845_50.2.A.3.22
ROM Version: H3113_Customized DE_1312-2606_50.2.A.3.77_R1B (installation by newflasher)
lineageOS: lineage-17.1-20200903-nightly-pioneer-signed
Had to Install this version of ROM because the Installation of TWARP or LineageOS Recovery failed originally. (no flashing on boot _a, can´t find partition size).
After that Installing TWARP aund LineageOS worked fine. .. exept Modem
i´ve reinstalled those files of the rom above.
modem_X-FLASH-ALL-18AE.sin
modemst1_X-FLASH-ALL-18AE.sin
modemst2_X-FLASH-ALL-18AE.sin
have been flashed twice, but no success.
Has anyone a idea what to do?
Found something: the telephone number is not shown in the SIM readings. APN and provider is ok.
Maybe that´s not a modem issue but a problem with reading the SIM. SIM is ok and works fine in other phones.
Other SIM tested, similar result. No reading of the telefonenumber.
Tested telefonining over WiFi. Doesn´t work either.
Flash stock firmware see if the problem is fixed. And check if phone IMEI is showing.
Good Luck
Edit:
Maybe https://forum.xda-developers.com/showthread.php?p=80469769this is your solution?
Sent from my H3113 using Tapatalk