Develop Bugs

pls pls help my bricked ascend p6 pls pls

I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device

sasadeaunty said:
I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device
Click to expand...
Click to collapse
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help

hi
taaeem said:
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help
Click to expand...
Click to collapse
Hi, if i reboot without plug-in the usb, it will also fail like (attached photo124)

hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery

blueIBI said:
hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery
Click to expand...
Click to collapse
Different stock recovery only can install certain ROM? I tried B125 already cannot. Any other recommend ROM for me to try? I rmb I flashed a quite latest stock recovery

then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..

blueIBI said:
then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..
Click to expand...
Click to collapse
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.

sasadeaunty said:
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
Click to expand...
Click to collapse
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4

maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..

miz_pimp said:
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
hi miz_pimp, if i do not plug in the usb cable, it will directly go into fail as showed in the picture124 i attached below, I do not rmb what firmware i installed previously, but I did a full wipe, I do not think thr is still firmware inside beside stock recovery.
Click to expand...
Click to collapse

blueIBI said:
maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..
Click to expand...
Click to collapse
I tried with different sdcard without usb plugged in, still giving me fail

very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..

blueIBI said:
very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..
Click to expand...
Click to collapse
i cant even flash my recovery, when i use adb, it just shows me waiting for device, then no response. I tried most of the ways but no one can help......

hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..

blueIBI said:
hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..
Click to expand...
Click to collapse
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess

miz_pimp said:
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Click to expand...
Click to collapse
sasadeaunty said:
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess
Click to expand...
Click to collapse
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.

miz_pimp said:
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.
Click to expand...
Click to collapse
hi miz_pimp, thank you so muchhhhhhhhhhhhh, I am able to recover my p6 with the firmware u linked to me. Really thank you and thanks for others too for helping me too. Thanks all.

Glad you got it sorted, and you're very welcome. [emoji2]

CAN-L11C432 & CAN-L01C432 Updates

Here are the latest updates for the dual sim and single sim Nova variants:
CAN-L11C432:
Full Update:
CAN-L11C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77947/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77947/f1/full/changelog.xml
Small Update:
CAN-L11C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77944/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77944/f1/full/changelog.xml
CAN-L01C432:
Full Update:
CAN-L01C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/changelog.xml
Small Update:
CAN-L01C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77930/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77930/f1/full/changelog.xml
The Full Updates you should be able to install from Marshmallow which will bring you to the current release of Nougat on the Nova and the Small Updates you can install from the Nova Nougat build CAN-L11C432B320 and CAN-L01C432B320.
If your device comes up with NRD90M test-keys then for the CAN-L11C432 variant you can try installing this after to get the correct Build number showing and functionality working: http://update.hicloud.com:8180/TDS/...-L11_hw_eu/update_data_full_CAN-L11_hw_eu.zip and for the CAN-L01C432 variant: http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip.
I have managed to get it to work on the CAN-L01C432 variant but a couple of others have not managed to install the hw eu update for their device which has left them with NRD90M test-keys showing under Build number and themes not working.

I tried to update but it fails at 41%. I'm on CAN-L01C02B130 , Vodafone branded.

pasmadferit said:
I tried to update but it fails at 41%. I'm on CAN-L01C02B130 , Vodafone branded.
Click to expand...
Click to collapse
These updates are for CAN-L01C432 and CAN-L11C432 variants of the Nova. You can try this if you want to but I am not sure if it will work on a branded device: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v74460/f1/full/update.zip. This is the latest Nougat update I have found for the CAN-L01C02 variant of the Nova.

lintern said:
These updates are for CAN-L01C432 and CAN-L11C432 variants of the Nova. You can try this if you want to but I am not sure if it will work on a branded device: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v74460/f1/full/update.zip. This is the latest Nougat update I have found for the CAN-L01C02 variant of the Nova.
Click to expand...
Click to collapse
thanks for the link but i have the same problem. On "updater" the phone didn't find it, i tried with putting down the phone with volume and power keys but it gave me the same error at 41%. Shame on Huawei that don't release the original firmware yet >.<

pasmadferit said:
thanks for the link but i have the same problem. On "updater" the phone didn't find it, i tried with putting down the phone with volume and power keys but it gave me the same error at 41%. Shame on Huawei that don't release the original firmware yet >.<
Click to expand...
Click to collapse
I had the same problem at first but after flashing this: https://drive.google.com/open?id=0B4T1GJ6EZ3LvTWNpZ0p5YXVINGs the Nougat update installed fine. The link is the stock EMUI 5 recovery which is for Nougat which I got of this page: https://forum.xda-developers.com/nova-plus/how-to/c432b320-android-7-0-available-try-t3527084/page7.

lintern said:
I had the same problem at first but after flashing this: https://drive.google.com/open?id=0B4T1GJ6EZ3LvTWNpZ0p5YXVINGs the Nougat update installed fine. The link is the stock EMUI 5 recovery which is for Nougats which I got of this page: https://forum.xda-developers.com/nova-plus/how-to/c432b320-android-7-0-available-try-t3527084/page7.
Click to expand...
Click to collapse
I'll try, thanks for the help man

pasmadferit said:
I'll try, thanks for the help man
Click to expand...
Click to collapse
It's up to you if you want to try it. You have to flash the recovery by adb first if you do this and then try updating again I see no reason why it should not work.

lintern said:
It's up to you if you want to try it. You have to flash the recovery by adb first if you do this and then try updating again I see no reason why it should not work.
Click to expand...
Click to collapse
I have to unlock bootloader first i think, right?

pasmadferit said:
I have to unlock bootloader first i think, right?
Click to expand...
Click to collapse
Unfortunately yes which is why I said it's up to you if you want to try it out. Some guys were lucky with the beta Nougat releases on the Nova which installed easily via the updater app or recovery on the device whereas you, me and others have had a bit more trouble which has required us to do more to update. Where it is a official Huawei recovery you may be able to flash it with adb without issues but I'm not sure. It's your call if you want to try it.

Thanks for the help man, i flashed first the recovery and then the update and all was ok. Very grateful.

pasmadferit said:
Thanks for the help man, i flashed first the recovery and then the update and all was ok. Very grateful.
Click to expand...
Click to collapse
No problem, did you install CAN-L01C02B130B407?

lintern said:
No problem, did you install CAN-L01C02B130B407?
Click to expand...
Click to collapse
I don't know what firmware is... In settings It shows me only model Number (Huawei CAN-L01) and serial number. Do you know how i can see it on emui 5.0?

pasmadferit said:
I don't know what firmware is... In settings It shows me only model Number (Huawei CAN-L01) and serial number. Do you know how i can see it on emui 5.0?
Click to expand...
Click to collapse
Extract this: http://update.hicloud.com:8180/TDS/...-L01_ti_it/update_data_full_CAN-L01_ti_it.zip and put the UPDATE.APP in a dload folder on the root of your SD Card and install it like the main Nougat update. This should fix it so the Build number shows up correctly and some other functionality issues. Once this is done next to Build Number it should say: CAN-L01C02B307, if it does then everything is working fine.

Hey I have downloaded CAN-l01 version, installed via fastboot (recovery.img, boot.img and system.img) but the updater is still missing from settings and the version number is NRD90M test-keys i'm not able to install the eu pack (update stops at 5%), how can I solve the missing updater?

mArIuS% said:
Hey I have downloaded CAN-l01 version, installed via fastboot (recovery.img, boot.img and system.img) but the updater is still missing from settings and the version number is NRD90M test-keys i'm not able to install the eu pack (update stops at 5%), how can I solve the missing updater?
Click to expand...
Click to collapse
I never installed mine by fastboot using adb, I extrated the big update then put it in a dload folder and installed using the three button method. I dunno why the hw eu pack is not installing as I had this issue and that installed fine for me.
If you installed this: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/update.zip then try installing this using the three button method: http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip and if you have tried that and it did not work then try this: http://update.hicloud.com:8180/TDS/...L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip.

lintern said:
I never installed mine by fastboot using adb, I extrated the big update then put it in a dload folder and installed using the three button method. I dunno why the hw eu pack is not installing as I had this issue and that installed fine for me.
If you installed this: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/update.zip then try installing this using the three button method: http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip and if you have tried that and it did not work then try this: http://update.hicloud.com:8180/TDS/...L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip.
Click to expand...
Click to collapse
It was the only way I was able to install the update method of the three buttons stopped updating to 5% whatever recovery I use.
Update.zip archive goes installed from CWM?

mArIuS% said:
It was the only way I was able to install the update method of the three buttons stopped updating to 5% whatever recovery I use.
Update.zip archive goes installed from CWM?
Click to expand...
Click to collapse
I have no idea then. The update worked fine for me using the three button method and all I had to do after was install the hw eu update that matched and it is all working fine. Yes you can install archived updates through custom recovery but I have not tried it with Huawei updates so I dunno what the outcome will be.
Here is a couple of screenshots which show the update working for me.

Flashed the CAN-L11C432B340 full update with the 3-button-method coming from Emui 4.1 (Android 6).
The update was successful up to 100%, but then I got a flash failed error. Phone booted succesful to Emui 5.0 with the NRD90M test-keys bug so in addition i flashed update_data_full_CAN-L11_hw_eu.zip and all seems to be fine except the hotspot functionality.
Does the hotspot feature work for you on B340? I cant enable it and after a while i get a settings force close....

will this work on Canadian Huawei Nova Plus variant?

jrosero said:
will this work on Canadian Huawei Nova Plus variant?
Click to expand...
Click to collapse
If your device Is CAN-L01C432 or CAN-L11C432 then yes if not then no.

Roll Back to MarshMallow [BLN-L22]

Hi,
Below are the steps to rollback to Marshmallow from Nougat. I've only tested it on BLN-L22 so I don't know if it works with other variants.
Your bootloader would be locked. However, you can unlock again using the old unlock code.
You can find firmware of your version @ Honor Official Site
Download the Marshmallow firmware from here Honor India Official Support
Unzip it and place the dload folder in the sdcard (internal storage wont work)
Power off the device.
Press Volume Down + Volume Up + Power key to log into Huawei software upgrade
Let it finish. Now installation is done. But now when you will boot, it will bootloop and go to Huawei ercovery. Simply select the shutdown option
Once the device is off, press Volume Up + Power. This will take you to Huawei Recovery
Wipe data and Wipe Cache
Restart. You are back to MarshMallow
Kindly do the above at your own risk. It worked for me, but it may brick for you.
Edit : User @honor6xak was able to rollback after wiping the system using TWRP and following above steps. If there is no system, there would be no firmware for Honor to overwrite. It would be as good as flashing fresh.
Method 2.
1. Make a nandroid backup (complete backup) and save it somewhere safe. Just in case things get messy.
2. Download the official firmware (Marshmallow) from the Honor official site.
3. Extract the dload folder from the firmware and put it into an sdcard (physical one).
4. Reboot to TWRP and wipe data + system. Twrp will warn you about wiping system. Once you do it. Power off the device.
5. Press volume up + volume down + power this will take you to Huawei recovery and will auto install the firmware if the folder is there in sdcard.
This is a tad bit risky but if you have nandroid backup then you can be on a safe side. But still do it only if you are sure. I don't have money to pay if you Sue me

The above link is for the Indian firmware for the US firmware (L24) you'll have to go to the us website. I got a little confused earlier trying to download it, just thought I'd give a heads up to anybody else. I'd link it but I had to create a new account as my old one is apparrently tied to an email I don't remember.

Ziffnil said:
The above link is for the Indian firmware for the US firmware (L24) you'll have to go to the us website. I got a little confused earlier trying to download it, just thought I'd give a heads up to anybody else. I'd link it but I had to create a new account as my old one is apparrently tied to an email I don't remember.
Click to expand...
Click to collapse
Yes, that's the reason I specified the BLN number. You don't need to login to have the firmware download. If you can give the link we can update the post.
Edit : I've updated site for Official firmware of various regions in the main post

It's official mm r ( this is root mobiles or unrooting mobiles ) any virus problem

eddy7990 said:
It's official mm r ( this is root mobiles or unrooting mobiles ) any virus problem
Click to expand...
Click to collapse
If you flash these official version you'll get unrooted and your bootloader would be locked again. But you can unlock the bootloader again and root also.
Since it is from official website I doubt it will have any virus

So hacky but... you can find the 'rollback package' here http ://www, hihonor, ]com/us/support/details/index,html?[DOC_ID=94205] and the firmware here http ://www, hihonor, [com/us/support/details/index.html?][DOC_ID=94205]
Just remove the spaces, brackets and replace periods with commas.

suhel28 said:
If you flash these official version you'll get unrooted and your bootloader would be locked again. But you can unlock the bootloader again and root also.
Since it is from official website I doubt it will have any virus
Click to expand...
Click to collapse
Hello bro,
I several times tried the method that you mentioned in your thread using a memory card but it always failed. I'm very curious how it worked for you. Right now I unlocked and rooted my Honor 6x BLN-L22.
I just want to know if your phone was unlocked when you tried this method.
If yes I'll give it a try. It might work this time.
Thank you

Angircy said:
Hello bro,
I several times tried the method that you mentioned in your thread using a memory card but it always failed. I'm very curious how it worked for you. Right now I unlocked and rooted my Honor 6x BLN-L22.
I just want to know if your phone was unlocked when you tried this method.
If yes I'll give it a try. It might work this time.
Thank you
Click to expand...
Click to collapse
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.

suhel28 said:
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
Click to expand...
Click to collapse
Bro it didn't work for me.

Angircy said:
Bro it didn't work for me.
Click to expand...
Click to collapse
You can do one thing I don't know if it work but you can try it. Download firmware finder from play store. Search for the latest nougat firmware then select download. There would be two files 1. Update.zip 2. BLNxxxx some name. Download the second file. Then flash it with twrp.
Now do the procedure as I described in the first post. When I did the roll back I was on the unofficial nougat version.
I'll search for some other method. Sorry it didn't work for you.

suhel28 said:
You can do one thing I don't know if it work but you can try it. Download firmware finder from play store. Search for the latest nougat firmware then select download. There would be two files 1. Update.zip 2. BLNxxxx some name. Download the second file. Then flash it with twrp.
Now do the procedure as I described in the first post. When I did the roll back I was on the unofficial nougat version.
I'll search for some other method. Sorry it didn't work for you.
Click to expand...
Click to collapse
Thanks a lot bro. I'll try that.

It worked for me on my BLN-L24, rolling it back to I could exchange it. However I had to do a couple other steps first to get it to work, so here's my full steps that worked for me:
1. If you have twrp or another custom recovery, flash it back to stock.
1a. To find the stock recovery I had to get it from the zip file here since I'm a dumbass and didn't make a backup: If you have twrp or another custom recovery, flash it back to stock.
2. If you have a custom bootloader, flash it back to stock.
3. Download and extract the stock rom. Flashing it from zip will not work.
4. Copy the UPDATE.app to /sdcard/dload/ (not a physical sdcard, if that's what's confusing you.
5. Turn the device all the way off.
6. Press and hold volume up, and volume down, then press and hold power until the phone starts booting, immediately release it once you see something on the screen.
It should now 'update' your phone back to EMUI 4.1.

Ziffnil said:
It worked for me on my BLN-L24, rolling it back to I could exchange it. However I had to do a couple other steps first to get it to work, so here's my full steps that worked for me:
1. If you have twrp or another custom recovery, flash it back to stock.
1a. To find the stock recovery I had to get it from the zip file here since I'm a dumbass and didn't make a backup: If you have twrp or another custom recovery, flash it back to stock.
2. If you have a custom bootloader, flash it back to stock.
3. Download and extract the stock rom. Flashing it from zip will not work.
4. Copy the UPDATE.app to /sdcard/dload/ (not a physical sdcard, if that's what's confusing you.
5. Turn the device all the way off.
6. Press and hold volume up, and volume down, then press and hold power until the phone starts booting, immediately release it once you see something on the screen.
It should now 'update' your phone back to EMUI 4.1.
Click to expand...
Click to collapse
I'd put the dload folder in the sdcard folder but it didn't work. I'd to use a physical sdcard

so can i flash the firware zip file using twrp please help me out am on twrp screen oly coudnt start my ddevice am running nougat emui 5 bln22
suhel28 said:
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
Click to expand...
Click to collapse

honor6xak said:
so can i flash the firware zip file using twrp please help me out am on twrp screen oly coudnt start my ddevice am running nougat emui 5 bln22
Click to expand...
Click to collapse
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP

i was on emui 5 nougat tried to install arise it did installed fine and later the camera was not opening and restarting device didnt help .... hence i went ahead and tried to flash the nougat again with twrp as i didnt know it ll be messed up like this
suhel28 said:
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Click to expand...
Click to collapse

honor6xak said:
i was on emui 5 nougat tried to install arise it did installed fine and later the camera was not restarting hence i went ahead and tried to flash the nougat again with twrp as i didnt know it ll be messed up like this
Click to expand...
Click to collapse
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP

suhel28 said:
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP
Click to expand...
Click to collapse
another confusion now i went to the honor official site and downloaded emui4 update its 1.7gb whears the file u mentioned above is just 733 mb so which one do i flash ??? bro
the file u mentioned above is it nougat ???
my twrp says there is no os on the device when i head to reboot so my question >>is it posible to install nougat and reboot them or shoould i go back to the marsh...
pls help me out bro

honor6xak said:
another confusion now i went to the honor official site and downloaded emui4 update its 1.7gb whears the file u mentioned above is just 733 mb so which one do i flash ??? bro
Click to expand...
Click to collapse
You cannot directly flash the 4.1 file on your nougat. If you want to do that then you have to use the procedure I gave in the first page.
The link I gave is for nougat version. Basically, when I had a similar problem like you I flashed the 733mb file and my phone was able to boot.
Wipe data in TWRP
Flash the 733mb file
Wipe cache
I hope it works

suhel28 said:
You cannot directly flash the 4.1 file on your nougat. If you want to do that then you have to use the procedure I gave in the first page.
The link I gave is for nougat version. Basically, when I had a similar problem like you I flashed the 733mb file and my phone was able to boot.
Wipe data in TWRP
Flash the 733mb file
Wipe cache
I hope it works
Click to expand...
Click to collapse
Both methods didn't work for me though I flashed the 733mb file using TWRP successfully.

Software install failed

My phone says I have a new update which is the 742MB B140 update that has been out for a while now. But I can't install it for some reason. I tried flashing the three zip files via TWRP and then I tried it with the stock recovery extracted from the UPDATE.APP from the B140 firmware update. Everytime it fails and says "Failed to check update files". In TWRP it gives different reasons depending on the zip I flash first. Is this because I unlocked my bootloader? I am new to Huawei or Honor and things are a bit more complicated with this one than I'm used to.

i am Kal-El said:
My phone says I have a new update which is the 742MB B140 update that has been out for a while now. But I can't install it for some reason. I tried flashing the three zip files via TWRP and then I tried it with the stock recovery extracted from the UPDATE.APP from the B140 firmware update. Everytime it fails and says "Failed to check update files". In TWRP it gives different reasons depending on the zip I flash first. Is this because I unlocked my bootloader? I am new to Huawei or Honor and things are a bit more complicated with this one than I'm used to.
Click to expand...
Click to collapse
Never flash ota updates with twrp .
For now , iam sure the update process is messed or atleast few files in system should corrupt due to incomplete flases. Better u try to return to full stock

gopinaidu77 said:
Never flash ota updates with twrp .
For now , iam sure the update process is messed or atleast few files in system should corrupt due to incomplete flases. Better u try to return to full stock
Click to expand...
Click to collapse
Do you know where I can get the full stock B130 for the Indian version? I tried googling and I tried Firmware finder too but I can't find DUK-L09C675B130 which is the current firmware version on my device. Thanks btw.

i am Kal-El said:
Do you know where I can get the full stock B130 for the Indian version? I tried googling and I tried Firmware finder too but I can't find DUK-L09C675B130 which is the current firmware version on my device. Thanks btw.
Click to expand...
Click to collapse
I will check and let you know

i am Kal-El said:
Do you know where I can get the full stock B130 for the Indian version? I tried googling and I tried Firmware finder too but I can't find DUK-L09C675B130 which is the current firmware version on my device. Thanks btw.
Click to expand...
Click to collapse
There is only b140 firmware available , let give a try dobload that from firmware finder and extract the zip there is update.app open it with huawei update extractor anf find the recovery.img and flash it . Anf try to update now.

venugopalu007 said:
There is only b140 firmware available , let give a try dobload that from firmware finder and extract the zip there is update.app open it with huawei update extractor anf find the recovery.img and flash it . Anf try to update now.
Click to expand...
Click to collapse
Already did that as I've mentioned.

i am Kal-El said:
Already did that as I've mentioned.
Click to expand...
Click to collapse
Ho , i didn't seen it .ok

i am Kal-El said:
Already did that as I've mentioned.
Click to expand...
Click to collapse
If you want B130 I think it's better to contact honor, they may give you a direct link to it (just mention you want FULL-OTA)

Yes better to contact them , they wont give you link but they will ask your imei and they push your update.

Please someone help mep

Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me

Salim0900 said:
Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me
Click to expand...
Click to collapse
Shows you which error?
Did you try to install it via local update?
Anyway, your best bet is to install TWRP and flash the CN ROM through TWRP.
Alternatively, use miflash tool in the unofficial unbrick tool to flash the CN firmware via edl mode

Nubia package error
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good

Salim0900 said:
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good
Click to expand...
Click to collapse
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best

zayidhs said:
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best
Click to expand...
Click to collapse
Sorry brother but I can't see any link

Salim0900 said:
Sorry brother but I can't see any link
Click to expand...
Click to collapse
http://romdownload.nubia.com/红魔5G/V6.23/NX659J-update.zip
There you are. Its the 6.23 version of the cn rom
This directs to the 5s version but both the 5s and 5g versions of this rom are identical. ( Md5 checksum proves its the same file)
Flash from recovery. Or through TWRP

Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device

Salim0900 said:
Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device
Click to expand...
Click to collapse
Otg refers to a external usb device you connect to the phone. If you have the update.zip on the root of the internal memory it should show up.
If it does not. You should use the root without unlocking bootloader tutorial to install TWRP. The zip will flash from there with no problems.