Here are the latest updates for the dual sim and single sim Nova variants:
CAN-L11C432:
Full Update:
CAN-L11C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77947/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77947/f1/full/changelog.xml
Small Update:
CAN-L11C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77944/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77944/f1/full/changelog.xml
CAN-L01C432:
Full Update:
CAN-L01C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/changelog.xml
Small Update:
CAN-L01C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77930/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77930/f1/full/changelog.xml
The Full Updates you should be able to install from Marshmallow which will bring you to the current release of Nougat on the Nova and the Small Updates you can install from the Nova Nougat build CAN-L11C432B320 and CAN-L01C432B320.
If your device comes up with NRD90M test-keys then for the CAN-L11C432 variant you can try installing this after to get the correct Build number showing and functionality working: http://update.hicloud.com:8180/TDS/...-L11_hw_eu/update_data_full_CAN-L11_hw_eu.zip and for the CAN-L01C432 variant: http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip.
I have managed to get it to work on the CAN-L01C432 variant but a couple of others have not managed to install the hw eu update for their device which has left them with NRD90M test-keys showing under Build number and themes not working.
I tried to update but it fails at 41%. I'm on CAN-L01C02B130 , Vodafone branded.
pasmadferit said:
I tried to update but it fails at 41%. I'm on CAN-L01C02B130 , Vodafone branded.
Click to expand...
Click to collapse
These updates are for CAN-L01C432 and CAN-L11C432 variants of the Nova. You can try this if you want to but I am not sure if it will work on a branded device: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v74460/f1/full/update.zip. This is the latest Nougat update I have found for the CAN-L01C02 variant of the Nova.
lintern said:
These updates are for CAN-L01C432 and CAN-L11C432 variants of the Nova. You can try this if you want to but I am not sure if it will work on a branded device: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v74460/f1/full/update.zip. This is the latest Nougat update I have found for the CAN-L01C02 variant of the Nova.
Click to expand...
Click to collapse
thanks for the link but i have the same problem. On "updater" the phone didn't find it, i tried with putting down the phone with volume and power keys but it gave me the same error at 41%. Shame on Huawei that don't release the original firmware yet >.<
pasmadferit said:
thanks for the link but i have the same problem. On "updater" the phone didn't find it, i tried with putting down the phone with volume and power keys but it gave me the same error at 41%. Shame on Huawei that don't release the original firmware yet >.<
Click to expand...
Click to collapse
I had the same problem at first but after flashing this: https://drive.google.com/open?id=0B4T1GJ6EZ3LvTWNpZ0p5YXVINGs the Nougat update installed fine. The link is the stock EMUI 5 recovery which is for Nougat which I got of this page: https://forum.xda-developers.com/nova-plus/how-to/c432b320-android-7-0-available-try-t3527084/page7.
lintern said:
I had the same problem at first but after flashing this: https://drive.google.com/open?id=0B4T1GJ6EZ3LvTWNpZ0p5YXVINGs the Nougat update installed fine. The link is the stock EMUI 5 recovery which is for Nougats which I got of this page: https://forum.xda-developers.com/nova-plus/how-to/c432b320-android-7-0-available-try-t3527084/page7.
Click to expand...
Click to collapse
I'll try, thanks for the help man
pasmadferit said:
I'll try, thanks for the help man
Click to expand...
Click to collapse
It's up to you if you want to try it. You have to flash the recovery by adb first if you do this and then try updating again I see no reason why it should not work.
lintern said:
It's up to you if you want to try it. You have to flash the recovery by adb first if you do this and then try updating again I see no reason why it should not work.
Click to expand...
Click to collapse
I have to unlock bootloader first i think, right?
pasmadferit said:
I have to unlock bootloader first i think, right?
Click to expand...
Click to collapse
Unfortunately yes which is why I said it's up to you if you want to try it out. Some guys were lucky with the beta Nougat releases on the Nova which installed easily via the updater app or recovery on the device whereas you, me and others have had a bit more trouble which has required us to do more to update. Where it is a official Huawei recovery you may be able to flash it with adb without issues but I'm not sure. It's your call if you want to try it.
Thanks for the help man, i flashed first the recovery and then the update and all was ok. Very grateful.
pasmadferit said:
Thanks for the help man, i flashed first the recovery and then the update and all was ok. Very grateful.
Click to expand...
Click to collapse
No problem, did you install CAN-L01C02B130B407?
lintern said:
No problem, did you install CAN-L01C02B130B407?
Click to expand...
Click to collapse
I don't know what firmware is... In settings It shows me only model Number (Huawei CAN-L01) and serial number. Do you know how i can see it on emui 5.0?
pasmadferit said:
I don't know what firmware is... In settings It shows me only model Number (Huawei CAN-L01) and serial number. Do you know how i can see it on emui 5.0?
Click to expand...
Click to collapse
Extract this: http://update.hicloud.com:8180/TDS/...-L01_ti_it/update_data_full_CAN-L01_ti_it.zip and put the UPDATE.APP in a dload folder on the root of your SD Card and install it like the main Nougat update. This should fix it so the Build number shows up correctly and some other functionality issues. Once this is done next to Build Number it should say: CAN-L01C02B307, if it does then everything is working fine.
Hey I have downloaded CAN-l01 version, installed via fastboot (recovery.img, boot.img and system.img) but the updater is still missing from settings and the version number is NRD90M test-keys i'm not able to install the eu pack (update stops at 5%), how can I solve the missing updater?
mArIuS% said:
Hey I have downloaded CAN-l01 version, installed via fastboot (recovery.img, boot.img and system.img) but the updater is still missing from settings and the version number is NRD90M test-keys i'm not able to install the eu pack (update stops at 5%), how can I solve the missing updater?
Click to expand...
Click to collapse
I never installed mine by fastboot using adb, I extrated the big update then put it in a dload folder and installed using the three button method. I dunno why the hw eu pack is not installing as I had this issue and that installed fine for me.
If you installed this: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/update.zip then try installing this using the three button method: http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip and if you have tried that and it did not work then try this: http://update.hicloud.com:8180/TDS/...L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip.
lintern said:
I never installed mine by fastboot using adb, I extrated the big update then put it in a dload folder and installed using the three button method. I dunno why the hw eu pack is not installing as I had this issue and that installed fine for me.
If you installed this: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/update.zip then try installing this using the three button method: http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip and if you have tried that and it did not work then try this: http://update.hicloud.com:8180/TDS/...L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip.
Click to expand...
Click to collapse
It was the only way I was able to install the update method of the three buttons stopped updating to 5% whatever recovery I use.
Update.zip archive goes installed from CWM?
mArIuS% said:
It was the only way I was able to install the update method of the three buttons stopped updating to 5% whatever recovery I use.
Update.zip archive goes installed from CWM?
Click to expand...
Click to collapse
I have no idea then. The update worked fine for me using the three button method and all I had to do after was install the hw eu update that matched and it is all working fine. Yes you can install archived updates through custom recovery but I have not tried it with Huawei updates so I dunno what the outcome will be.
Here is a couple of screenshots which show the update working for me.
Flashed the CAN-L11C432B340 full update with the 3-button-method coming from Emui 4.1 (Android 6).
The update was successful up to 100%, but then I got a flash failed error. Phone booted succesful to Emui 5.0 with the NRD90M test-keys bug so in addition i flashed update_data_full_CAN-L11_hw_eu.zip and all seems to be fine except the hotspot functionality.
Does the hotspot feature work for you on B340? I cant enable it and after a while i get a settings force close....
will this work on Canadian Huawei Nova Plus variant?
jrosero said:
will this work on Canadian Huawei Nova Plus variant?
Click to expand...
Click to collapse
If your device Is CAN-L01C432 or CAN-L11C432 then yes if not then no.
Related
Hello together,
i got a MediaPad M2 801-W. It was running on Android 5.1.1.
So i just downloaded the 6.0 image for it. BUT i downloaded the M2-802Lxxx Version....
I dident know there are differne version of the Tablet....
The Updater just finished fine and the Tablet just started just normal BUT it is now random crashing and restarting the Os.
So i tried to install the correct version back but now the Updater in the os has no Local seetting to select the update.zip.
In Recovery the Updater works but dosent update the correct version.
It is verifying the update and than says "Software install failed".
Is there an other way to update the correct update to the tablet?
Sorry about my bad english....
Best Regards isi
isipisi281 said:
Hello together,
i got a MediaPad M2 801-W. It was running on Android 5.1.1.
So i just downloaded the 6.0 image for it. BUT i downloaded the M2-802Lxxx Version....
I dident know there are differne version of the Tablet....
The Updater just finished fine and the Tablet just started just normal BUT it is now random crashing and restarting the Os.
So i tried to install the correct version back but now the Updater in the os has no Local seetting to select the update.zip.
In Recovery the Updater works but dosent update the correct version.
It is verifying the update and than says "Software install failed".
Is there an other way to update the correct update to the tablet?
Sorry about my bad english....
Best Regards isi
Click to expand...
Click to collapse
Flash this in stock recovery through dload method:
https://drive.google.com/file/d/0B5I_q70mNuR4N3JLTnNDYzBEYTg/view?usp=sharing
Then you need the stock 801W rom, extract the update.app and flash it through dload. Then it should work and flash back to stock.
Thank you but your file has only 21kb is this right?
When i put the file in the dload directorie and boot with power + vol up + down the installer is verifying something installs it to 36% and aborts again. =(
isipisi281 said:
Hello together,
i got a MediaPad M2 801-W. It was running on Android 5.1.1.
So i just downloaded the 6.0 image for it. BUT i downloaded the M2-802Lxxx Version....
I dident know there are differne version of the Tablet....
The Updater just finished fine and the Tablet just started just normal BUT it is now random crashing and restarting the Os.
So i tried to install the correct version back but now the Updater in the os has no Local seetting to select the update.zip.
In Recovery the Updater works but dosent update the correct version.
It is verifying the update and than says "Software install failed".
Is there an other way to update the correct update to the tablet?
Sorry about my bad english....
Best Regards isi
Click to expand...
Click to collapse
Okey for those who did the same **** like me:
First download http://download-c.huawei.com/download/downloadCenter?downloadId=74723&version=273368&siteCode=tw
Than downgrade to this version.
Now you can update to the corect 801-w Android 6.0 version.
Me too install wrong update I have MediaPad M2 801-L, But i downloaded 6.0 the M2-801Wxxx version and got a MediaPad M2 801-W after install update.zip. Updater in the os has no Local setting to select the update.zip. I try downgrade to 5.1.1 M2-801Wxxx version by three buttons, flash stock recovery. But on choose language button "next" not working. Continue try install different stock flash...
Sorry about my bad english....
Just what I needed.
You literally saved my tablet. I had the exact issues (stupidly installed the 801L Marshmallow update on my 801W, which resulted in the non stop rebooting every 5 minutes). Nothing was working and no other roms were being accepted until I came across your post. I made this account just to thank you! The tablet was brand new and was lying boxed and unused for 3 years, so thought I'd use it
Just in the unlikely event anybody else faces this problem, just wanna add one clarification to Isipisi281's original post; to get the first step interim update to happen, make sure you unzip the update file first, then find the update.app file and paste that and it's accompanying folder into the dload folder in your directory, or else the update will fail. The rest is clockwork.
And PS, the M2 runs amazingly after the marshmallow update. Noticeably smoother, snappier and even more frugal with added android features. Highly recommended.
Thanks again!
ajsmsg78 said:
Flash this in stock recovery through dload method:
https://drive.google.com/file/d/0B5I_q70mNuR4N3JLTnNDYzBEYTg/view?usp=sharing
Then you need the stock 801W rom, extract the update.app and flash it through dload. Then it should work and flash back to stock.
Click to expand...
Click to collapse
Hey man - what is the file you shared in this post please?? I need to do the same as is in this thread - revert from 80xL to W version of firmware but the update keeps failing...any idea please??
Sopis said:
Hey man - what is the file you shared in this post please?? I need to do the same as is in this thread - revert from 80xL to W version of firmware but the update keeps failing...any idea please??
Click to expand...
Click to collapse
I don't have the file anymore. Maybe someone in this thread still has it? I'm pretty sure is was the downgrade script to be able to downgrade.
ajsmsg78 said:
I don't have the file anymore. Maybe someone in this thread still has it? I'm pretty sure is was the downgrade script to be able to downgrade.
Click to expand...
Click to collapse
gotcha..it has been a long time ago...well, no matter how I try, I cannot flash anything :/ every FW I downloaded fails...I am lost with this tablet...
Sopis said:
gotcha..it has been a long time ago...well, no matter how I try, I cannot flash anything :/ every FW I downloaded fails...I am lost with this tablet...
Click to expand...
Click to collapse
Yeah, welcome to Huawei world. They don't make it easy to go back to stock on the older devices.
ajsmsg78 said:
Yeah, welcome to Huawei world. They don't make it easy to go back to stock on the older devices.
Click to expand...
Click to collapse
cheers
anyway, do you have any idea how I could do this? as I said, I managed to get back to lollipop, but am still on L version and cannot flash anything over it...any hint is much appreacited...unfortunately, I am not twrp, frp unlocked so fastboot is out of question
I managed to capture the OTA link and get the file guys
https://drive.google.com/open?id=0B_as3y0lZtevWkR5NjgzU0h1cTQ
sandy108 said:
I managed to capture the OTA link and get the file guys
https://drive.google.com/open?id=0B_as3y0lZtevWkR5NjgzU0h1cTQ
Click to expand...
Click to collapse
Is this ok to install on the US variants?
Sent from my iPhone using Tapatalk
From what I understand, I'm just supposed to download this and then go to my recovery and update from recovery right?
As in like update from internal storage right?
What version is this from?
hey bro did you have the flashligt icon and gesture in the new update?
Anyone flashed this with flash fire?
How to install on rooted devices???
sandy108 said:
I managed to capture the OTA link and get the file guys
https://drive.google.com/open?id=0B_as3y0lZtevWkR5NjgzU0h1cTQ
Click to expand...
Click to collapse
You didn't tell us what variant of the phone you have
How to install???
zimplemeh said:
Is this ok to install on the US variants?
Click to expand...
Click to collapse
No this is not recommended to install on US variant
saqlainrattansi said:
From what I understand, I'm just supposed to download this and then go to my recovery and update from recovery right?
As in like update from internal storage right?
Click to expand...
Click to collapse
Yes you got it right
olive23 said:
What version is this from?
Click to expand...
Click to collapse
It's from build number *67
Jayesh Nirve said:
How to install???
Click to expand...
Click to collapse
Either use stock recovery or use Flashfire
zeft64 said:
You didn't tell us what variant of the phone you have
Click to expand...
Click to collapse
Indian Variant
Flash fire ain't working phone just reboots with no changes
can i install on retbr?
I think the location version does not matter as long as you have the right build number. I had retla .15 and tried to flash .35 in order to update to .67 (fail), the ota ask for .14/.15. So I had to install stock .15 again and redo the process.
Something I'd like to add is the stock recovery did not recognize internal or sd storage, so I had to push ota via ADB.
*Also my warning bootscreen changed from N/A to Bad Key multiple times for apparently no reason. But everything is working fine.
Pls tell me how u went back to 15 plsss
Aredhelelen said:
I think the location version does not matter as long as you have the right build number. I had retla .15 and tried to flash .35 in order to update to .67 (fail), the ota ask for .14/.15. So I had to install stock .15 again and redo the process.
Something I'd like to add is the stock recovery did not recognize internal or sd storage, so I had to push ota via ADB.
*Also my warning bootscreen changed from N/A to Bad Key multiple times for apparently no reason. But everything is working fine.
Click to expand...
Click to collapse
Exactly what I have been trying to tell. There is a fingerprint mismatch that happens. On a side note how did you manage to take yourself back from .35 to .15 and then update to .67. I get the last part, but downgrading with a higher bootloader; and where did you get the .15 build
You can simply install one of the stock versions already posted here in the forum, I just downloaded the .15 and installed it again via fastboot with the command lines (also explained in that post, in comments) like any other stock rom. Then, after starting the phone you must activate USB debbuging mode to be able to use ADB commands, so you can restart the phone in stock recovery and activate the push ota update via ADB.
Anyway, if this sounds complicated I think there is already a flashable .zip to apply ota, you can give it a try.
WW 1910.64 RAW FULL & OTA update download links + root img link, notes & instructions
RAW WW 1910.64 2.66GB
https://mega.nz/#!spBlACjC!S1UcaxBmnL_e3GGeoBL1ebWJPbSyPQBZESFdxbakuGc
WW OTA file (From. 44 to. 64) 122MB
https://fota2.asus.com/delta_packag...910.44-16.0631.1910.64-12100105-fota-user.zip
FULL WW FIRMWARE 2.2GB
http://dlcdnets.asus.com/pub/ASUS/Z..._I001_1-ASUS-16.0631.1910.64-1.1.253-user.zip
rootww191064.img 48.2MB
https://mega.nz/#!PzYhma5b!1did324GAxfvRk6z4LCKM2pfhbwf4jKpb1e1ER6bLYk
The safest way to update without losing anything is to download the 2.2gb full firmware file on your device then move it to root using the built in file manager. Once you have moved it restart your device and follow the upgrade instructions, takes less than 5 minutes.
Version number
16.0631.1910.64
Update information
1.Fixed Docomo SIM often disconnected mobile network issue.
2.Fixed occasional touch failure.
3.Fixed that navigation bar will not shrink to bottom automatically when playing PUBG MOBILE game.
4.Fixed call volume being lower than normal for Facebook and WhatsApp calling.
5.Fixed File Manager crashing when opening a picture in the middle folder.
6.Fixed that user can’t share Airtrigger or key mapping settings in “Star Commander”.
It still has the October 1st Android security patch.
FULL WW FIRMWARE
http://dlcdnets.asus.com/pub/ASUS/Z..._I001_1-ASUS-16.0631.1910.64-1.1.253-user.zip
Updated and keep root, thanks mate.
cloud1 said:
FULL WW FIRMWARE
http://dlcdnets.asus.com/pub/ASUS/Z..._I001_1-ASUS-16.0631.1910.64-1.1.253-user.zip
Click to expand...
Click to collapse
What's the difference between the User version and the raw version please. Everytime i have to wait for the raw version, is there a way for me to move to the User version and get quick updates? If there is please how? Thanks
tnbt said:
What's the difference between the User version and the raw version please. Everytime i have to wait for the raw version, is there a way for me to move to the User version and get quick updates? If there is please how? Thanks
Click to expand...
Click to collapse
Just download the full one and put on root.
That's what I did and it updated after a restart.
cloud1 said:
Just download the full one and put on root.
That's what I did and it updated after a restart.
Click to expand...
Click to collapse
I did that with the previous updates and it never worked till i got the raw version and flashed. Dunno how to get to use the fota versions. Any help?
tnbt said:
I did that with the previous updates and it never worked till i got the raw version and flashed. Dunno how to get to use the fota versions. Any help?
Click to expand...
Click to collapse
Seriously just grab the full version and put on root, I did it like half an hour ago zero issues.
tnbt said:
I did that with the previous updates and it never worked till i got the raw version and flashed. Dunno how to get to use the fota versions. Any help?
Click to expand...
Click to collapse
Do you have a WW version with WW fingerprint? In case you have a WW version with CN fingerprint FOTA versions won't work!
How about keeping rooted using FULL WW FIRMWARE 2.2GB?
FOTA update will work on Tencent with WW rom. Just rename FOTA zip file exactly as full ROM
Mad_Duke said:
Do you have a WW version with WW fingerprint? In case you have a WW version with CN fingerprint FOTA versions won't work!
Click to expand...
Click to collapse
I have changed fingerprint as well to WW
---------- Post added at 03:25 PM ---------- Previous post was at 03:25 PM ----------
SkipperRyujin said:
FOTA update will work on Tencent with WW rom. Just rename FOTA zip file exactly as full ROM
Click to expand...
Click to collapse
Will try this out, thanks
Can i install from 16.0631.1908.12 to this FULL version with update or i must have 1910.44 version ? Have fingerprint to WW.
I just tryed and its working Thanks for update !
cloud1 said:
Just download the full one and put on root.
That's what I did and it updated after a restart.
Click to expand...
Click to collapse
What do u mean by put on root.
Which folder are u talking about ?
Just downloaded the full rom.
I am currently on 1910.44 and rooted.
Will I be able to tay rooted after update ?
CRYPTfromCATACOMBZ said:
How about keeping rooted using FULL WW FIRMWARE 2.2GB?
Click to expand...
Click to collapse
Download full rom, place in root of storage, reboot, update. Don't select restart, select later. Open magisk manager, click to install magisk, select after ota, force install ok then reboot. Job done, root maintained
reg66 said:
Download full rom, place in root of storage, reboot, update. Don't select restart, select later. Open magisk manager, click to install magisk, select after ota, force install ok then reboot. Job done, root maintained
Click to expand...
Click to collapse
I forgot about the magisk part and rebooted losing root in the process.
Any way to extract the boot image so I can patch it with magisk? It do I need to wait for the RAW ROM?
gilsol said:
I forgot about the magisk part and rebooted losing root in the process.
Any way to extract the boot image so I can patch it with magisk? It do I need to wait for the RAW ROM?
Click to expand...
Click to collapse
Well I have just asked over on the Vietnam Telegram group if there's an ETA on the patched root img. Hopefully I'll get a response soon and will let you know ASAP. But yeah, once that's released you can go ahead and flash it for root using the cmd "fastboot flash boot xxxx.img"
Hopefully you can/don't mid waiting a couple of days for it to be released - until then, you'll just have to be unrooted
I'll keep you posted...
reg66 said:
Well I have just asked over on the Vietnam Telegram group if there's an ETA on the patched root img. Hopefully I'll get a response soon and will let you know ASAP. But yeah, once that's released you can go ahead and flash it for root using the cmd "fastboot flash boot xxxx.img"
Hopefully you can/don't mid waiting a couple of days for it to be released - until then, you'll just have to be unrooted
I'll keep you posted...
Click to expand...
Click to collapse
Thanks a lot, I have been researching this a bit and I'm going to try to get the boot image from the fulll ROM payload.bin. there are tools for this, if I'm successful than magisk can take care of the rest.
I'll keep you posted as well.
:good:
zohaibshafijutt said:
What do u mean by put on root.
Which folder are u talking about ?
Just downloaded the full rom.
I am currently on 1910.44 and rooted.
Will I be able to tay rooted after update ?
Click to expand...
Click to collapse
Just move the zip update from downloads folder and paste it into the main area where other folders are stored, like downloads/music/ringtones etc etc... Don't place it in any folder, just place it in the same location as those other folders...
From there, restart the phone and when update is detected, choose to update but DON'T select to reboot once it is done. Instead, open Magisk Manager and select 'install' for Magisk (not magisk manager), then select 'Install to Inactive Slot (After OTA). Install it and reboot. That's it, root will be maintained :good:
Hi pls help. Even though i put it in internal storage and restart it. My phone cant detect an update. My firmware is 1910.44 and tencent fully converted to WW with WW fingerprint
carlaldous said:
Hi pls help. Even though i put it in internal storage and restart it. My phone cant detect an update. My firmware is 1910.44 and tencent fully converted to WW with WW fingerprint
Click to expand...
Click to collapse
Did you download the full rom or the small ota? If it's the small ota you need to rename it to exact name of the full ota, or just download the full... I went for the full rom. Did you restart the phone after?
I've tried several ROMS and on my current build, which I thought was stock, I did receive some OTA security updates once I booted it up but I did not receive the Android 10 update. Which ROM is required to enable the OTA Android 10 update?
The latest ROM I attempted was downloaded from here: http://c.mi.com//miuidownload/detail?device=1700354, which will download the file "daisy_global_images_V10.0.13.0.PDLMIXM_20190813.0000.00_9.0_5d0d486f04.tgz". From there I used 7zip to extract it and then I used MiFlash to flash the ROM while in Fastboot. Unfortunately, I received an error "Erase boot_a error". I've never received that error message before so I'm not sure where I made the mistake and if this is even the correct ROM I need to flash to receive the OTA Android 10 update.
Phone is not bricked. Boots up just fine in Android 9. See attachments.
Thank you in advance.
Here's the latest one
daisy_global_images_V11.0.4.0.QDLMIXM_10.0.rar
https://drive.google.com/open?id=1SqP3hUkpBd5PaML2hy5zSf7HjNtuwNR2
Success. @andraslate
That worked perfectly sir. Thank you very much.
ConsistentCarl said:
Success. @andraslate
That worked perfectly sir. Thank you very much.
Click to expand...
Click to collapse
You're welcome.
Confused
ConsistentCarl said:
Success. @andraslate
So you got Android 10 from that and I can't find miflàsh on playstore
Click to expand...
Click to collapse
Hi all,
I've the 2120 with the OXOS 11.2.5.5.LE15DA I would flash my device whit the EU version. LE15BA.
I'ts possible flash it using the FULL 11.2.6.6.LE15BA ?
I just tried with the same version number ( 11.2.5.5.LE15BA ). but does not work becase the version number is the same.
Regards
Federico
FRED1979IT said:
Hi all,
I've the 2120 with the OXOS 11.2.5.5.LE15DA I would flash my device whit the EU version. LE15BA.
I'ts possible flash it using the FULL 11.2.6.6.LE15BA ?
I just tried with the same version number ( 11.2.5.5.LE15BA ). but does not work becase the version number is the same.
Regards
Federico
Click to expand...
Click to collapse
Hello,
Yes you can flash full OTA of 11.2.6.6LE15BA without any problem without losing anything through local upgrade.
Or you can do what i did, download a downgrade ota file. In my case i was in 11.2.5.5LE15DA and downloaded downgrade OTA of 11.2.5.5LE15BA and flashed again through local upgrade, but since this was a "downgrade" it wipes all data. I didnt mind the wiping since i couldnt wait for the new update for too long.
How to downgrade the current version?
Federico
FRED1979IT said:
How to downgrade the current version?
Federico
Click to expand...
Click to collapse
[OnePlus 9 Pro][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
As OnePlus doesn't always provide download links for all of their OxygenOS ROMs & OTA update zips, we've created an index to put the links in one post so that they're easy to find. Note: This is not a support thread for issues you may have with...
forum.xda-developers.com
Go below find the downgrade zips
Find the 11.2.5.5LE15BA and download it. Then flash it through settings>local upgrade. And when you click on downgraded zip it will notify you all data wil be wiped, click continue isntall and phone will reboot into recovery, wipe all data, boots into android setup. I think this is best options since it cleans flash the old version.
Ninxha said:
[OnePlus 9 Pro][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
As OnePlus doesn't always provide download links for all of their OxygenOS ROMs & OTA update zips, we've created an index to put the links in one post so that they're easy to find. Note: This is not a support thread for issues you may have with...
forum.xda-developers.com
Go below find the downgrade zips
Find the 11.2.5.5LE15BA and download it. Then flash it through settings>local upgrade. And when you click on downgraded zip it will notify you all data wil be wiped, click continue isntall and phone will reboot into recovery, wipe all data, boots into android setup. I think this is best options since it cleans flash the old version.
Click to expand...
Click to collapse
@Ninxha
Thanks for the reply, but I've a question, the downgrade file refer to Android 12.. it ok for me? I've Android 11.
OnePlus9ProOxygen_22.I.08_OTA_0080_all_2105011324_downgrade_for_Android12_d83ef61ac3704bad
FRED1979IT said:
@Ninxha
Thanks for the reply, but I've a question, the downgrade file refer to Android 12.. it ok for me? I've Android 11.
OnePlus9ProOxygen_22.I.08_OTA_0080_all_2105011324_downgrade_for_Android12_d83ef61ac3704bad
Click to expand...
Click to collapse
Totally okay for you. That is what i flashed. Because i could not wait 11.2.6.6. and i just recieved 11.2.6.6 LE15BA update today, so all working perfectly.
Ninxha said:
Totally okay for you. That is what i flashed. Because i could not wait 11.2.6.6. and i just recieved 11.2.6.6 LE15BA update today, so all working perfectly.
Click to expand...
Click to collapse
@Ninxha thks for the reply.
Just a recap
1) downgrade the current firmware 11.2.5.5.LE15DA
2) flash whit the 11.2.5.5.LE15BA
I need to download both firmware on the device? 11.2.5.5.LE15DA downgrade + 11.2.5.5.LE15BA
ok?
FRED1979IT said:
@Ninxha thks for the reply.
Just a recap
1) downgrade the current firmware 11.2.5.5.LE15DA
2) flash whit the 11.2.5.5.LE15BA
I need to download both firmware on the device? 11.2.5.5.LE15DA downgrade + 11.2.5.5.LE15BA
ok?
Click to expand...
Click to collapse
No.
1-Download 11.2.5.5LE15BA.
2-Move it to Internal storage.
3-Remove the .jar and replace it with .zip extension.
4-Go settings, System updates, Local update, you will see the 11.2.5.5LE15BA
5-Press on it and it will notify you that you are about to Downgrade. Click Downgrade, Download and install. And thats it. In the end you click Reboot and you will be on Android Set up with 11.2.5.5LE15BA.
Ninxha said:
No.
1-Download 11.2.5.5LE15BA. --> Downgrade ZIP ?
2-Move it to Internal storage.
3-Remove the .jar and replace it with .zip extension.
4-Go settings, System updates, Local update, you will see the 11.2.5.5LE15BA
5-Press on it and it will notify you that you are about to Downgrade. Click Downgrade, Download and install. And thats it. In the end you click Reboot and you will be on Android Set up with 11.2.5.5LE15BA.
Click to expand...
Click to collapse
Let me know how it goes.
Ninxha said:
Let me know how it goes.
Click to expand...
Click to collapse
yes sure, I'm doing a full backup of my photo and then go it
FRED1979IT said:
yes sure, I'm doing a full backup of my photo and then go it
Click to expand...
Click to collapse
You are not rooted right?
Ninxha said:
You are not rooted right?
Click to expand...
Click to collapse
right I'm not rooted
FRED1979IT said:
right I'm not rooted
Click to expand...
Click to collapse
All good then proceed like i told you
Ninxha said:
All good then proceed like i told you
Click to expand...
Click to collapse
It's all ok! i'm now 11.2.5.5LE15BA. . I'm waiting the OTA meesage for the update to 11.2.6.6
Many thks @Ninxha
Is there any way to rollback from 11.2.6.6
To 11.2.5.5? I'm locked
Noexcusses said:
Is there any way to rollback from 11.2.6.6
To 11.2.5.5? I'm locked
Click to expand...
Click to collapse
download and flash a downgrade zip of 11.2.5.5 to local update. but you lose data, phone is wiped when downgrading.
FRED1979IT said:
It's all ok! i'm now 11.2.5.5LE15BA. . I'm waiting the OTA meesage for the update to 11.2.6.6
Many thks @Ninxha
Click to expand...
Click to collapse
Enjoy it update should be coming soon no worries.
Ninxha said:
download and flash a downgrade zip of 11.2.5.5 to local update. but you lose data, phone is wiped when downgrading.
Click to expand...
Click to collapse
I'm not rooted brother..
Noexcusses said:
I'm not rooted brother..
Click to expand...
Click to collapse
[OnePlus 9 Pro][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
As OnePlus doesn't always provide download links for all of their OxygenOS ROMs & OTA update zips, we've created an index to put the links in one post so that they're easy to find. Note: This is not a support thread for issues you may have with...
forum.xda-developers.com
No need to be rooted. You go to the Downgrade zips links and download whichever variant you want of the 11.2.5.5. Then through Settings-System updates- Local upgrade, pick the downgraded zip you downloaded. It will promt you that you are Downgrading and it will wipe data, and after you confirm it and install it, phone reboots into recovery wipes data, reboots to android setup.