I got a problem with signal of the wifi in my FP. When I am just next to the router the signal is only the half than it should be. It has been checked with other smartphones and laptops and in them, it works fine.
So, internet goes very slowly.
Has anybody experiencing the same problem?
Thanks
Enviado desde mi FP1 mediante Tapatalk
Updates
have you installed any of the Official Updates?
You can test your WiFi like this:
Turn it off.
Hold volume down + power button.
navigate with volume down to Test Report
choose Test Report with power button
navigate with volume down to WiFi
choose WiFi with power button, try to get a quick glimpse at the output (vanishing fast)
check if WiFi gets an red X or a green 0.
Click to expand...
Click to collapse
perhaps you can find the solution by reconfigure your Router by using Wifi analyzer:
http://forum.xda-developers.com/showthread.php?t=2676212
Click to expand...
Click to collapse
Greez
Maybe already known...
When you press the metal side button 2 times, the watch enters "Theater Mode" [emoji2]
And 2 times to turn it back off..
AW 5.0.1
Send with Tapatalk on Sony Z2
Nice hint!
But in my case it happens after 3 touches!
Thx that's working perfectly !
Good to know, thanks
djgodlike said:
Maybe already known...
When you press the metal side button 2 times, the watch enters "Theater Mode" [emoji2]
And 2 times to turn it back off..
AW 5.0.1
Send with Tapatalk on Sony Z2
Click to expand...
Click to collapse
Great hint. Thanks for posting.
wohoho nice trick
Awesome
Sent from my HTC One_M8 using Tapatalk
I tap twice insteed of 3...
Hi guys I received this phone some days before and I am having a lie issue and is when I try to wake up the phone with the finger print pushing the button or the lateral one. The phone is in black don't wake up if I touch the buttons I feel the vibrationsame but still off the screen and after several tune it wake up normally. And all work OK. I think no is a hardware issue coz normally it works fine but some time's ..Ido no is a big problem but disturb. Ty to all
Enviado desde mi SM-G928F mediante Tapatalk
Can the way to navigate in recovery be changed?
Recovery says to navigate use volume up and down but it should be press power.
Thats because I bought a core board from a touch only unit for my head unit with hardware buttons.
But the boards are universal so there must be a way to change it.
maus05 said:
Can the way to navigate in recovery be changed?
Recovery says to navigate use volume up and down but it should be press power.
Thats because I bought a core board from a touch only unit for my head unit with hardware buttons.
But the boards are universal so there must be a way to change it.
Click to expand...
Click to collapse
Recovery will respond to an external keyboard input so you can temporarily connect a USB keyboard
Visit http://wranglerrestyle.com for Jeep Wrangler aftermarket head unit comparisons, reviews, tips & tricks!
Yes, of course but that doesn't solve the problem.
maus05 said:
Yes, of course but that doesn't solve the problem.
Click to expand...
Click to collapse
For touch only screens...there shkud be a reset button so short press to move through menus and long press to select
Enviado desde mi SM-G950F mediante Tapatalk
But my unit is not touch only.
I have a BMW e46 and a Xtrons PE9946BIPL .
Is there a way to assign the button 1 to Google Assitant and Button 2 only to Poweramp and Radio?
Yes, there should be a steering app. Was it connected to the radio.
bobodaclownster said:
Yes, there should be a steering app. Was it connected to the radio.
Click to expand...
Click to collapse
Could you please tell me what app and how to use it?
On my unit it looks like a steering wheel, you open the app, press the button, assign the action, save. It also detects long press and short press.
bobodaclownster said:
On my unit it looks like a steering wheel, you open the app, press the button, assign the action, save. It also detects long press and short press.
Click to expand...
Click to collapse
I have that App but when I press the buttons nothing happens. But all the buttons work fine.
blackluar said:
I have that App but when I press the buttons nothing happens. But all the buttons work fine.
Click to expand...
Click to collapse
Change can bus.
Enviado de meu Redmi Note 4 usando o Tapatalk
You mean remove the brown box or change settings on radio?
I really would like to use key 1 to open Google assintant. I didn't found a solution yet.
blackluar said:
You mean remove the brown box or change settings on radio?
Click to expand...
Click to collapse
In you device. Factory settings. Change can bus for you car.
Enviado de meu Redmi Note 4 usando o Tapatalk
ederfabricio1989 said:
In you device. Factory settings. Change can bus for you car.
Enviado de meu Redmi Note 4 usando o Tapatalk
Click to expand...
Click to collapse
My car uses i-bus
blackluar said:
My car uses i-bus
Click to expand...
Click to collapse
go to factory settings - 126 , select other -steering wheel keys - SWC assign (or something similar) and you will be able to detect the buttons.
Do I need to connect Key1 and Key2 cables to the radio? I didn't connected but the buttons are working fine. I jist would like to assign button 1 and 2 to different apps.
frmata said:
go to factory settings - 126 , select other -steering wheel keys - SWC assign (or something similar) and you will be able to detect the buttons.
Click to expand...
Click to collapse
I did that but when I press the buttons nothing appears on the app that came with the unit.
blackluar said:
My car uses i-bus
Click to expand...
Click to collapse
Have you tried remapping the keys by the system itself? If so try changing the i.bus protocol, perhaps it is not recognizing these buttons.
Enviado de meu Redmi Note 4 usando o Tapatalk
If you have Android 8.0, install Hal9k firmware on it(youll find it here on this forum) there inside mod settings you can change and assign buttons
If you have 9.0 then wait a month or so.
AndroidAutoShop said:
If you have Android 8.0, install Hal9k firmware on it(youll find it here on this forum) there inside mod settings you can change and assign buttons
If you have 9.0 then wait a month or so.
Click to expand...
Click to collapse
Does this work with a PX6?
frmata said:
go to factory settings - 126 , select other -steering wheel keys - SWC assign (or something similar) and you will be able to detect the buttons.
Click to expand...
Click to collapse
Hi,
I hope you’re well. I’m wondering if you can help, I have stupidly changed the default canbus settings on my headunit in my e46 and my steering wheel controls are no longer working.
i was trying to disable the reverse camera when this happened.
If possible could you please let me know what your canbus settings are so I can copy them?
Thank you!