Develop Bugs

Firmware upgrade problem

Okay my original Cid is H3G__106 and I'm super Cid now, I downloaded htc 001 nandroid backup and changed my Cid to htc 001, as well looked for updates but the update fails in philz.
I need the newer firmware for the new viper rom. (4.4.3 base).
How can I get it?

Shebee said:
Okay my original Cid is H3G__106 and I'm super Cid now, I downloaded htc 001 nandroid backup and changed my Cid to htc 001, as well looked for updates but the update fails in philz.
I need the newer firmware for the new viper rom. (4.4.3 base).
How can I get it?
Click to expand...
Click to collapse
OTA ZIP COLLECTION

BerndM14 said:
OTA ZIP COLLECTION
Click to expand...
Click to collapse
I assume I then need to use the h3g 106 one since the htc001 didn't work. Problem is I have 401.5 and there is no update for that.

Shebee said:
I assume I then need to use the h3g 106 one since the htc001 didn't work. Problem is I have 401.5 and there is no update for that.
Click to expand...
Click to collapse
Did you try to convert your device to international? MID and everything changed to International version? I'm not sure what the MID is for your device but if it's different than 0P6B10000 (International WWE) then it had to have been changed as well before you can convert to WWE version.
401.5 ? For what, 1.54.401.5 ... 2.22.401.5 ?
If you don't want to convert to International, rather go back download your backup from the collection thread and update your device to newest firmware from there.

BerndM14 said:
Did you try to convert your device to international? MID and everything changed to International version? I'm not sure what the MID is for your device but if it's different than 0P6B10000 (International WWE) then it had to have been changed as well before you can convert to WWE version.
401.5 ? For what, 1.54.401.5 ... 2.22.401.5 ?
If you don't want to convert to International, rather go back download your backup from the collection thread and update your device to newest firmware from there.
Click to expand...
Click to collapse
I only changed Cid nothing else. Is there a guide on how to fully convert to international edition?
Atm I'm 1.54.401.5
Problem is the stock thread doesn't have philz recovery backup for h3g 106 1.54.401.5

Shebee said:
I only changed Cid nothing else. Is there a guide on how to fully convert to international edition?
Atm I'm 1.54.401.5
Problem is the stock thread doesn't have philz recovery backup for h3g 106 1.54.401.5
Click to expand...
Click to collapse
The guides that I saw are for changing AT&T into Developer Edition or [GUIDE] S-OFF REQUIRED!! full conversion of GSM m8s to dev edition
Even though it's converting to a developer edition the philosophy behind it is the same when you change to WWE International version. Just use the correct backups, firmwares, MID and CID.
In step 1 you'll follow the thread and use the code for the HTC_Europe MID (0P6B10000).
For step 2 you'll just use HTC__001 as as the CID
Step 3 you'll grab the nandroid backup + stock recovery for the WWE International version (x.xx.401.x ) Rather use an older version like 1.54.401.5/10 and do updates from there, it'll be easier if you don't want to manually flash firmware and OTA's.
If you continue the way he has it in his guide then you'll get the firmware from the OTA collection thread(Just extract it from OTA.zip) or you can get firmware for device from mike1986's Androidrevolution.org
It's for a different device but the idea is the exact same.

BerndM14 said:
The guides that I saw are for changing AT&T into Developer Edition or [GUIDE] S-OFF REQUIRED!! full conversion of GSM m8s to dev edition
Even though it's converting to a developer edition the philosophy behind it is the same when you change to WWE International version. Just use the correct backups, firmwares, MID and CID.
In step 1 you'll follow the thread and use the code for the HTC_Europe MID (0P6B10000).
For step 2 you'll just use HTC__001 as as the CID
Step 3 you'll grab the nandroid backup + stock recovery for the WWE International version (x.xx.401.x ) Rather use an older version like 1.54.401.5/10 and do updates from there, it'll be easier if you don't want to manually flash firmware and OTA's.
If you continue the way he has it in his guide then you'll get the firmware from the OTA collection thread(Just extract it from OTA.zip) or you can get firmware for device from mike1986's Androidrevolution.org
It's for a different device but the idea is the exact same.
Click to expand...
Click to collapse
Basically I just change Cid and mid, then I'm basically converted?

Shebee said:
Problem is the stock thread doesn't have philz recovery backup for h3g 106 1.54.401.5
Click to expand...
Click to collapse
The BIGGEST problem is no such thing as h3g 106 1.54.401.5 in this world

ckpv5 said:
The BIGGEST problem is no such thing as h3g 106 1.54.401.5 in this world
Click to expand...
Click to collapse
Umm I got H3G__106 CID and 1.54.401.5 (through venom) soo. What should I do...

Shebee said:
Umm I got H3G__106 CID and 1.54.401.5 (through venom) soo. What should I do...
Click to expand...
Click to collapse
1.54.401.5 is old Venom ROM version no.
H3G__106 firmware is : 1.54.771.9 (for 4.2.2) and you need the updated firmware 2.22.771.5 to run Venom 4.4.3
So download the OTA 1.54.771.9 -> 2.22.771.5 thanks @houstie, open it with 7-zip, extract out the firmware.zip and flash that in RUU mode.
Then reflash Philz recovery and install latest Venom ROM ...done

Shebee said:
Basically I just change Cid and mid, then I'm basically converted?
Click to expand...
Click to collapse
And placing the correct firmware/rom on it. You are S-OFF though, right? I didn't see you mention it so I'm just basically running on an assumption here?

ckpv5 said:
1.54.401.5 is old Venom ROM version no.
H3G__106 firmware is : 1.54.771.9 (for 4.2.2) and you need the updated firmware 2.22.771.5 to run Venom 4.4.3
So download the OTA 1.54.771.9 -> 2.22.771.5 thanks @houstie, open it with 7-zip, extract out the firmware.zip and flash that in RUU mode.
Then reflash Philz recovery and install latest Venom ROM ...done
Click to expand...
Click to collapse
Thanks I'll try that today.

BerndM14 said:
And placing the correct firmware/rom on it. You are S-OFF though, right? I didn't see you mention it so I'm just basically running on an assumption here?
Click to expand...
Click to collapse
Ye I'm soff rooted unlocked bootloader etc.

Kind of wondering why your using philz instead of TWRP

jake.99x3 said:
Kind of wondering why your using philz instead of TWRP
Click to expand...
Click to collapse
Why not. Twrp is not "better" than philz and vice versa.....

If you want ViperOne, you'll want to switch to TWRP. It's on the OP on their thread.
Also, the super id I use is 11111111. Try that and see if it works.
Sorry I didn't quote you Mr Hofs, but I'm not sure how to yet on tapatalk.
EDIT just figured it out. Next time

Help with installing ARHD

Trying to install Android Revolution HD lolipop, i have tried installing it but it just gets stuck and reboots into recovery. I need newer firmware but i can't find anything that supports my model and cid. Any help would be appreciated. Or can i flash firmware that does not have my cid somehow ? What are my options?
TWRP 2.8.5.0
Current Firmware: 3.11.1700.5
S-OFF
0P6B12000
cidnum: CWS__001 AT&T
I think i figured it out:
http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727

Vomer's guide pretty much covers it. You can change your CID since you are s-off. And you can make it SuperCID 11111111, which allows you to flash firmware for any CID (SuperCID essentially "passes" any CID check).
You can also try the firmware for the US Dev Edition. Its Lollipop firmware, and intended to be used on AT&T's network:
http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365

iwcarbon said:
Trying to install Android Revolution HD lolipop, i have tried installing it but it just gets stuck and reboots into recovery. I need newer firmware but i can't find anything that supports my model and cid. Any help would be appreciated. Or can i flash firmware that does not have my cid somehow ? What are my options?
TWRP 2.8.5.0
Current Firmware: 3.11.1700.5
S-OFF
0P6B12000
cidnum: CWS__001 AT&T
I think i figured it out:
http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
Click to expand...
Click to collapse
Looks like you're running the GPe conversion. If so, you first need to get back to the Sense partition so follow the 'Back to Sense' thread in General and then flash the Sense-based ROM of your choice (along with matching FW package)

EddyOS said:
Looks like you're running the GPe conversion.
Click to expand...
Click to collapse
Good catch.

Why can I not install the OTA for nougat? (error shown)

S-off Locked per SunShine
I have an AT&T International Unlocked HTC 10
I had to revert back to stock recovery since I flashed twrp and was told I need to have stock in order to accept the OTA. According to MID, I have the 2PS650000 Model listed on @topjohnwu 's thread at http://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297. I flashed the CID: BS_US001/BS_US002 | MID: 2PS650000
1.53.617.5 STOCK Recovery img listed there.
There issue is that after downloading the OTA, the phone goes into Recovery and says it is expecting a different build fingerprint. (Shown in attached image)
What is the deal? What should I be doing or am I doing wrong?!!?

Why you want use the nougat RUU?
Powered by HTC 10

2WildFirE said:
Why you want use the nougat RUU?
Powered by HTC 10
Click to expand...
Click to collapse
Maybe I am not understanding. If I don't download the OTA, How am I to get nougat then? Is there a link for it on the forum I've missed?
Not yet rooted here.

http://forum.xda-developers.com/showthread.php?t=3511670
Powered by HTC 10

I want international Gsm (401) Ruu stock rom to flash my htc one m9 (nougat 7.0)

I want international Gsm (401) Ruu stock rom to flash my htc one m9 (nougat 7.0)

[email protected] said:
I want international Gsm (401) Ruu stock rom to flash my htc one m9 (nougat 7.0)
Click to expand...
Click to collapse
U should read Flippy 's thread, all u need is there.
https://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Post 5
Remember, ruu's will wipe your phone, so always backup first.
(moderators will move your thread in the questions section as here is developing section)

none of them are suitable for my device , i need 44.28.401.3 version of stock rom (its neither At&t nor verizon , its European version (international gsm) ,i tried every frimware from htc /us/support/downloads of m9 none of them had worked

[email protected] said:
none of them are suitable for my device , i need 44.28.401.3 version of stock rom (its neither At&t nor verizon , its European version (international gsm) ,i tried every frimware from htc /us/support/downloads of m9 none of them had worked
Click to expand...
Click to collapse
There is no 44.28.401.3 issued. Are u sure u have an m9?
There is an 4.28.401.3 :
https://www.androidfilehost.com/?fid=817550096634758268

Fain11 said:
There is no 44.28.401.3 issued. Are u sure u have an m9?
There is an 4.28.401.3 :
https://www.androidfilehost.com/?fid=817550096634758268
Click to expand...
Click to collapse
Sorry for the typo it's 4.28.401.3
Can you please explain me how to install after downloading this rom ?

[email protected] said:
Sorry for the typo it's 4.28.401.3
Can you please explain me how to install after downloading this rom ?
Click to expand...
Click to collapse
That is not a rom. It's a RUU. It will wipe all data from your phone.
The thread I mentioned before has all info needed about flashing RUUs.
Don't flash anything before understand what u do.
Good luck!

Which RUU can I use to get back to stock?
S-ON
fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: xxxxx
(bootloader) version-main: 3.35.401.12
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440792_97.00.51203G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: HTC__032

kbal said:
Which RUU can I use to get back to stock?
Click to expand...
Click to collapse
Please read the ReadMe thread. It will answer your question.

Flippy498 said:
Please read the ReadMe thread. It will answer your question.
Click to expand...
Click to collapse
Well, I did.
you need to use a 3.x RUU for the same SKU and install the 4.x OTA, afterwards.
But it doesn't work.
I'm trying to upgrade to Nougat, but I get red triangle after 25% and I can't find an solution to this problem.

So you still get the triangle after you flashed the correct 3.x RUU? Or is the triangle the reason because of which you want to flash a RUU?
In your last post you asked which RUU to use and that is explained in the RUU section.
Sent from my HTC One M9 using XDA Labs

Flippy498 said:
So you still get the triangle after you flashed the correct 3.x RUU? Or is the triangle the reason because of which you want to flash a RUU?
In your last post you asked which RUU to use and that is explained in the RUU section.
Sent from my HTC One M9 using XDA Labs
Click to expand...
Click to collapse
Triangle is the reason why I want to RUU.
I went 'back to stock' with TWRP backup to update to nougat, but I get stuck at 25%. I'd like to try RUU to see if it makes any difference, but the few I tried won't start to install.
I see a lot of people have problems with updating to nougat and getting stuck at 25%, but seems no one was able to fix this problem. Failing nand? Phone works 100% OK otherwise.

Well, in that case you only need to follow the advices in the ReadMe thread. A RUU should fix the red triangle for the present. However, it won't guarantee that you won't face any nand issues in the future.
Sent from my HTC One M9 using XDA Labs

I managed to RUU and after OTA update to nougat by flashing the RUU rom.zip (renamed to 0PJAIMG.zip from micro-SD) from this post:
https://forum.xda-developers.com/one-m9/help/htc-one-m9-3-35-401-12-ruu-installer-t3318517

Oreo on Australian HTC__039 HTC 10

Hi,
I have an unlocked Australian HTC 10 (CID:HTC_039)
I've been running Viper 10 from Venom ROMs but sadly that's ceased development. So I'd like to switch over to LeeDroid (or even back to stock rom and root) and get the Oreo update. However as far as I can find HTC haven't released an RUU for my device. So I'm thinking perhaps I could use sunshine to s-off, then change my CID (though I'm not totally sure yet how that is done) and use an RUU that way to get the Oreo update - I should then be able to install LeeDroid as well with Oreo I think as the RUU will give me the firmware for Oreo?
I'm concerned that I could loose my cellular and/or Wi-Fi and other radios though? which would be a serious issue... I read about changing radio firmware - do I need to do this and would it break my connections? perhaps change the radio bands it supports?
Thanks for helping out a total noob!

debatingrooster said:
Hi,
I have an unlocked Australian HTC 10 (CID:HTC_039)
I've been running Viper 10 from Venom ROMs but sadly that's ceased development. So I'd like to switch over to LeeDroid (or even back to stock rom and root) and get the Oreo update. However as far as I can find HTC haven't released an RUU for my device. So I'm thinking perhaps I could use sunshine to s-off, then change my CID (though I'm not totally sure yet how that is done) and use an RUU that way to get the Oreo update - I should then be able to install LeeDroid as well with Oreo I think as the RUU will give me the firmware for Oreo?
I'm concerned that I could loose my cellular and/or Wi-Fi and other radios though? which would be a serious issue... I read about changing radio firmware - do I need to do this and would it break my connections? perhaps change the radio bands it supports?
Thanks for helping out a total noob!
Click to expand...
Click to collapse
Hey, there is an RUU available in the AUS thread. I changed my CID from Vodafone aus to WWE. The only thing you lose is VOLTE. Other than that I get good reception and data. Oreo isn't out yet for Australia so it all depends on what your really want to do with your phone. SOFF was well worth the money for me.
Here is a few links for you to read. Let me know if you have an more questions.
AUS RUU
https://forum.xda-developers.com/htc-10/how-to/australia-htc-10-australian-t3393941/page41
De Brand thread. (how to change CID)
https://forum.xda-developers.com/htc-10/how-to/guide-how-to-drand-convert-htc-10-to-t3374593

yldlj said:
Hey, there is an RUU available in the AUS thread. I changed my CID from Vodafone aus to WWE. The only thing you lose is VOLTE. Other than that I get good reception and data. Oreo isn't out yet for Australia so it all depends on what your really want to do with your phone. SOFF was well worth the money for me.
Here is a few links for you to read. Let me know if you have an more questions.
AUS RUU
https://forum.xda-developers.com/htc-10/how-to/australia-htc-10-australian-t3393941/page41
De Brand thread. (how to change CID)
https://forum.xda-developers.com/htc-10/how-to/guide-how-to-drand-convert-htc-10-to-t3374593
Click to expand...
Click to collapse
Thanks for the reply - Can't believe I never found that RUU... In any case I've used sunshine to S-OFF and changed my CID & MID to accept an RUU for US-Unlocked at the moment. But I can't find an oreo RUU where the MID and CID are known so that I can flash it to get the firmware updated and make it compatible with leedroid (based on oreo)
I've also lost cellular connectivity but that happened before I S-OFFed so I hope that's just fixable by formatting everything...

debatingrooster said:
Thanks for the reply - Can't believe I never found that RUU... In any case I've used sunshine to S-OFF and changed my CID & MID to accept an RUU for US-Unlocked at the moment. But I can't find an oreo RUU where the MID and CID are known so that I can flash it to get the firmware updated and make it compatible with leedroid (based on oreo)
I've also lost cellular connectivity but that happened before I S-OFFed so I hope that's just fixable by formatting everything...
Click to expand...
Click to collapse
Download this ruu zip file
https://androidfilehost.com/?w=files&flid=242523
Rename the file to 2PS6IMG.zip
Place on external SD card
Boot to download mode
Press vol up to flash.
After its flashed Turn phone back on make sure everything is working stock. Then flash latest twrp followed by leedroid.

yldlj said:
Download this ruu zip file
https://androidfilehost.com/?w=files&flid=242523
Rename the file to 2PS6IMG.zip
Place on external SD card
Boot to download mode
Press vol up to flash.
After its flashed Turn phone back on make sure everything is working stock. Then flash latest twrp followed by leedroid.
Click to expand...
Click to collapse
Ok I've done that (haven't done TWRP yet) and cellular is back!!
Thanks heaps - Will update here if there's anymore problems!

So for anyone following along behind it all works fine - although the Oreo update is basically uninteresting IMO. Probably staying on Viper 10 Nougat would have been better...

debatingrooster said:
So for anyone following along behind it all works fine - although the Oreo update is basically uninteresting IMO. Probably staying on Viper 10 Nougat would have been better...
Click to expand...
Click to collapse
Once kernel source is released and we get a custom kernel things will be alot better with battery and customizations.

Here's hoping, although I've never used a custom kernel. Any recommendations for customising apps available for HTC 10 Oreo now?
Thanks for all your help

(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) current-slot:
(bootloader) imei: 3542xxxxxxxxxxxx
(bootloader) version-main: 2.42.710.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: VODAP021
Hello i am at the same exact situation with you, being doing a bit of research on how to fix this. this is so far what i learned, flash firmware and flash oreo rom.
currently i am in S-on but i will s-off after i get the whole idea and correct file to do the firmware flashing, the thing is i still not sure how to flash firmware and where to get the correct file, or i have to change my cid and mid to find the matched firmware, mind to guide me in that?

minwater said:
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) current-slot:
(bootloader) imei: 3542xxxxxxxxxxxx
(bootloader) version-main: 2.42.710.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: VODAP021
Hello i am at the same exact situation with you, being doing a bit of research on how to fix this. this is so far what i learned, flash firmware and flash oreo rom.
currently i am in S-on but i will s-off after i get the whole idea and correct file to do the firmware flashing, the thing is i still not sure how to flash firmware and where to get the correct file, or i have to change my cid and mid to find the matched firmware, mind to guide me in that?
Click to expand...
Click to collapse
Hey - so what I did is this:
https://forum.xda-developers.com/showpost.php?p=66750161&postcount=4
But use this firmware instead
https://androidfilehost.com/?fid=818070582850487062
Hope that helps

debatingrooster said:
Hey - so what I did is this:
https://forum.xda-developers.com/showpost.php?p=66750161&postcount=4
But use this firmware instead
https://androidfilehost.com/?fid=818070582850487062
Hope that helps
Click to expand...
Click to collapse
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
---------- Post added at 07:37 AM ---------- Previous post was at 07:36 AM ----------
debatingrooster said:
Hey - so what I did is this:
https://forum.xda-developers.com/showpost.php?p=66750161&postcount=4
But use this firmware instead
https://androidfilehost.com/?fid=818070582850487062
Hope that helps
Click to expand...
Click to collapse
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
what cid and mid i should change to?

minwater said:
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
---------- Post added at 07:37 AM ---------- Previous post was at 07:36 AM ----------
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
what cid and mid i should change to?
Click to expand...
Click to collapse
Right now the custom ROMs for the HTC 10 all seem to be based on Nougat firmware - if you follow the steps I gave you you'll end up with oreo firmware - so if you want a custom rom don't follow those steps - just install it now using TWRP (assuming you are running Nougat at the moment)

debatingrooster said:
Right now the custom ROMs for the HTC 10 all seem to be based on Nougat firmware - if you follow the steps I gave you you'll end up with oreo firmware - so if you want a custom rom don't follow those steps - just install it now using TWRP (assuming you are running Nougat at the moment)
Click to expand...
Click to collapse
i updated my phone to Leedroid 5.1 which is base on oreo, got bootloop and i went back to leedroid 4, and problem occur. can i flash to leedroid 5.0 which is oreo based after i flash the firmware? what cid and mid i should change to?
thank you for your help.!

minwater said:
i updated my phone to Leedroid 5.1 which is base on oreo, got bootloop and i went back to leedroid 4, and problem occur. can i flash to leedroid 5.0 which is oreo based after i flash the firmware? what cid and mid i should change to?
thank you for your help.!
Click to expand...
Click to collapse
Yes you can. You need to be on Oreo firmware for his ROM. you need to S off your phone and change CID, I recommend you follow the guide in the link above, debrand to WWE using RUU.zip. Just follow that guide step by step and once you have the phone running take the OTA to Oreo then flash twrp follwed by leedroid ROM
Edit: because you flashed leedroid rom then went back to Nougat you want have baseband but once your running Oreo rom it will return.

yldlj said:
Yes you can. You need to be on Oreo firmware for his ROM. you need to S off your phone and change CID, I recommend you follow the guide in the link above, debrand to WWE using RUU.zip. Just follow that guide step by step and once you have the phone running take the OTA to Oreo then flash twrp follwed by leedroid ROM
Edit: because you flashed leedroid rom then went back to Nougat you want have baseband but once your running Oreo rom it will return.
Click to expand...
Click to collapse
now my phone is rooted, so step by stem is
1. S-off using sunshine
2. change CID and MID to HTC_001 and 2ps620000 (by the guide)
3.Flash RUU
https://androidfilehost.com/?w=files&flid=242523
tell me if the file is correct. there is 2 which one?
4.flash custom recovery again (i am using 3.2.1-2)
5.flash custom rom
let me know if something wrong thank you:angel:

minwater said:
now my phone is rooted, so step by stem is
1. S-off using sunshine
2. change CID and MID to HTC_001 and 2ps620000 (by the guide)
3.Flash RUU
https://androidfilehost.com/?w=files&flid=242523
tell me if the file is correct.
4.flash custom recovery again (i am using 3.2.1-2)
5.flash custom rom
let me know if something wrong thank you:angel:
Click to expand...
Click to collapse
Wrong RUU. there is no RUU for WWE yet and that RUU won't flash unless you have Oreo firmware. So like I said follow the debrand to WWE using RUU.zip. the RUU is posted in that thread all you have to do is follow the Instructions. Once everything is done and you have flashed the RUU boot the phone up (you won't have radio) use Wi-Fi to take the OTA to Oreo. Flash latest twrp because RUU will flash stock recovery then flash leedroid ROM.
So steps would be
1: Obtain S OFF
2: Change CID to HTC__001, MID is the same so don't need to change that.
3: FLASH 2.41.401.41 RUU
4: Take OTA
5: Flash latest twrp, a new twrp was posted yesterday
6: Flash Leedroid.

yldlj said:
Wrong RUU. there is no RUU for WWE yet and that RUU won't flash unless you have Oreo firmware. So like I said follow the debrand to WWE using RUU.zip. the RUU is posted in that thread all you have to do is follow the Instructions. Once everything is done and you have flashed the RUU boot the phone up (you won't have radio) use Wi-Fi to take the OTA to Oreo. Flash latest twrp because RUU will flash stock recovery then flash leedroid ROM.
So steps would be
1: Obtain S OFF
2: Change CID to HTC__001, MID is the same so don't need to change that.
3: FLASH 2.41.401.41 RUU
4: Take OTA
5: Flash latest twrp, a new twrp was posted yesterday
6: Flash Leedroid.
Click to expand...
Click to collapse
thank you! s-off ed, doing the OTA now!! should b alright ad i guess?

minwater said:
thank you! s-off ed, doing the OTA now!! should b alright ad i guess?
Click to expand...
Click to collapse
Should be all good. After OTA boot the phone make sure everyone is working. If you want to after that flash twrp then leedroid. :good:

yldlj said:
Should be all good. After OTA boot the phone make sure everyone is working. If you want to after that flash twrp then leedroid. :good:
Click to expand...
Click to collapse
a question, the main point of s-off is we r able to flash the firmware ourself? but to match the firmware we need the same CID and MID, am i correct?

minwater said:
a question, the main point of s-off is we r able to flash the firmware ourself? but to match the firmware we need the same CID and MID, am i correct?
Click to expand...
Click to collapse
Yes. modified firmwares as well. As you took OTA to Oreo there is no need to flash any firmware.