Okay my original Cid is H3G__106 and I'm super Cid now, I downloaded htc 001 nandroid backup and changed my Cid to htc 001, as well looked for updates but the update fails in philz.
I need the newer firmware for the new viper rom. (4.4.3 base).
How can I get it?
Shebee said:
Okay my original Cid is H3G__106 and I'm super Cid now, I downloaded htc 001 nandroid backup and changed my Cid to htc 001, as well looked for updates but the update fails in philz.
I need the newer firmware for the new viper rom. (4.4.3 base).
How can I get it?
Click to expand...
Click to collapse
OTA ZIP COLLECTION
BerndM14 said:
OTA ZIP COLLECTION
Click to expand...
Click to collapse
I assume I then need to use the h3g 106 one since the htc001 didn't work. Problem is I have 401.5 and there is no update for that.
Shebee said:
I assume I then need to use the h3g 106 one since the htc001 didn't work. Problem is I have 401.5 and there is no update for that.
Click to expand...
Click to collapse
Did you try to convert your device to international? MID and everything changed to International version? I'm not sure what the MID is for your device but if it's different than 0P6B10000 (International WWE) then it had to have been changed as well before you can convert to WWE version.
401.5 ? For what, 1.54.401.5 ... 2.22.401.5 ?
If you don't want to convert to International, rather go back download your backup from the collection thread and update your device to newest firmware from there.
BerndM14 said:
Did you try to convert your device to international? MID and everything changed to International version? I'm not sure what the MID is for your device but if it's different than 0P6B10000 (International WWE) then it had to have been changed as well before you can convert to WWE version.
401.5 ? For what, 1.54.401.5 ... 2.22.401.5 ?
If you don't want to convert to International, rather go back download your backup from the collection thread and update your device to newest firmware from there.
Click to expand...
Click to collapse
I only changed Cid nothing else. Is there a guide on how to fully convert to international edition?
Atm I'm 1.54.401.5
Problem is the stock thread doesn't have philz recovery backup for h3g 106 1.54.401.5
Shebee said:
I only changed Cid nothing else. Is there a guide on how to fully convert to international edition?
Atm I'm 1.54.401.5
Problem is the stock thread doesn't have philz recovery backup for h3g 106 1.54.401.5
Click to expand...
Click to collapse
The guides that I saw are for changing AT&T into Developer Edition or [GUIDE] S-OFF REQUIRED!! full conversion of GSM m8s to dev edition
Even though it's converting to a developer edition the philosophy behind it is the same when you change to WWE International version. Just use the correct backups, firmwares, MID and CID.
In step 1 you'll follow the thread and use the code for the HTC_Europe MID (0P6B10000).
For step 2 you'll just use HTC__001 as as the CID
Step 3 you'll grab the nandroid backup + stock recovery for the WWE International version (x.xx.401.x ) Rather use an older version like 1.54.401.5/10 and do updates from there, it'll be easier if you don't want to manually flash firmware and OTA's.
If you continue the way he has it in his guide then you'll get the firmware from the OTA collection thread(Just extract it from OTA.zip) or you can get firmware for device from mike1986's Androidrevolution.org
It's for a different device but the idea is the exact same.
BerndM14 said:
The guides that I saw are for changing AT&T into Developer Edition or [GUIDE] S-OFF REQUIRED!! full conversion of GSM m8s to dev edition
Even though it's converting to a developer edition the philosophy behind it is the same when you change to WWE International version. Just use the correct backups, firmwares, MID and CID.
In step 1 you'll follow the thread and use the code for the HTC_Europe MID (0P6B10000).
For step 2 you'll just use HTC__001 as as the CID
Step 3 you'll grab the nandroid backup + stock recovery for the WWE International version (x.xx.401.x ) Rather use an older version like 1.54.401.5/10 and do updates from there, it'll be easier if you don't want to manually flash firmware and OTA's.
If you continue the way he has it in his guide then you'll get the firmware from the OTA collection thread(Just extract it from OTA.zip) or you can get firmware for device from mike1986's Androidrevolution.org
It's for a different device but the idea is the exact same.
Click to expand...
Click to collapse
Basically I just change Cid and mid, then I'm basically converted?
Shebee said:
Problem is the stock thread doesn't have philz recovery backup for h3g 106 1.54.401.5
Click to expand...
Click to collapse
The BIGGEST problem is no such thing as h3g 106 1.54.401.5 in this world
ckpv5 said:
The BIGGEST problem is no such thing as h3g 106 1.54.401.5 in this world
Click to expand...
Click to collapse
Umm I got H3G__106 CID and 1.54.401.5 (through venom) soo. What should I do...
Shebee said:
Umm I got H3G__106 CID and 1.54.401.5 (through venom) soo. What should I do...
Click to expand...
Click to collapse
1.54.401.5 is old Venom ROM version no.
H3G__106 firmware is : 1.54.771.9 (for 4.2.2) and you need the updated firmware 2.22.771.5 to run Venom 4.4.3
So download the OTA 1.54.771.9 -> 2.22.771.5 thanks @houstie, open it with 7-zip, extract out the firmware.zip and flash that in RUU mode.
Then reflash Philz recovery and install latest Venom ROM ...done
Shebee said:
Basically I just change Cid and mid, then I'm basically converted?
Click to expand...
Click to collapse
And placing the correct firmware/rom on it. You are S-OFF though, right? I didn't see you mention it so I'm just basically running on an assumption here?
ckpv5 said:
1.54.401.5 is old Venom ROM version no.
H3G__106 firmware is : 1.54.771.9 (for 4.2.2) and you need the updated firmware 2.22.771.5 to run Venom 4.4.3
So download the OTA 1.54.771.9 -> 2.22.771.5 thanks @houstie, open it with 7-zip, extract out the firmware.zip and flash that in RUU mode.
Then reflash Philz recovery and install latest Venom ROM ...done
Click to expand...
Click to collapse
Thanks I'll try that today.
BerndM14 said:
And placing the correct firmware/rom on it. You are S-OFF though, right? I didn't see you mention it so I'm just basically running on an assumption here?
Click to expand...
Click to collapse
Ye I'm soff rooted unlocked bootloader etc.
Kind of wondering why your using philz instead of TWRP
jake.99x3 said:
Kind of wondering why your using philz instead of TWRP
Click to expand...
Click to collapse
Why not. Twrp is not "better" than philz and vice versa.....
If you want ViperOne, you'll want to switch to TWRP. It's on the OP on their thread.
Also, the super id I use is 11111111. Try that and see if it works.
Sorry I didn't quote you Mr Hofs, but I'm not sure how to yet on tapatalk.
EDIT just figured it out. Next time
Related
Hi guys im returning to stock as it need a repair i just want to flash a stock rom and remove root and remove recocvery ect
I have s off and super cid (it was a branded vodafone cid)
Can i just flash any stock ruu and if so where can i get the latest uk version please
Thank you
brockyneo said:
Hi guys im returning to stock as it need a repair i just want to flash a stock rom and remove root and remove recocvery ect
I have s off and super cid (it was a branded vodafone cid)
Can i just flash any stock ruu and if so where can i get the latest uk version please
Thank you
Click to expand...
Click to collapse
You can flash any version.I would recommend to flash wwe version as it gets the updates first.
http://forum.xda-developers.com/showthread.php?t=2701376
Jyotirdeb said:
You can flash any version.I would recommend to flash wwe version as it gets the updates first.
http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
thanks for that dont suppose there is a stock uk RUU i can use or does it have to be done this way
thanks
brockyneo said:
thanks for that dont suppose there is a stock uk RUU i can use or does it have to be done this way
thanks
Click to expand...
Click to collapse
You see since you are S_OFF you can install wwe fw ie 1.54.401.5 and for ruu http://forum.xda-developers.com/showthread.php?t=2735235
But remember your mid should be 0P6B10000 and cid should be HTC__001 or supercid.
Jyotirdeb said:
You see since you are S_OFF you can install wwe fw ie 1.54.401.5 and for ruu http://forum.xda-developers.com/showthread.php?t=2735235
But remember your mid should be 0P6B10000 and cid should be HTC__001 or supercid.
Click to expand...
Click to collapse
Hi sorry what is mid? The phone was Vodafone branded I want to leave s off and super cid
I just want to flash the latest stock room and stock recovery and remove root
Sorry just a bit of noob as I'm use to Samsung where you just flash via odin. Lol
Thanks
brockyneo said:
Hi sorry what is mid? The phone was Vodafone branded I want to leave s off and super cid
I just want to flash the latest stock room and stock recovery and remove root
Sorry just a bit of noob as I'm use to Samsung where you just flash via odin. Lol
Thanks
Click to expand...
Click to collapse
Vodafone UK? What was the original CID and Version number? VODAP001 and x.xx.161.x ?
COLLECTION of Stock backup's has nandroid backups for both 1.12.161.17 and 1.54.161.5 . The stock recovery is also at that thread though it's only for the 1.54.161.5.
I see it's TWRP nandroid backups though, so hopefully you already have TWRP recovery on. Then just download the nandroid backups, unzip it into the SD card backup folder for TWRP i.e TWRP/Backups/serialnum/ Just replace serialnum with your device serial number and restore nandroid backup. It'll then take you to 1.54.161.5 if there's a new OTA for it then just apply and you have latest then. Just make sure to flash back stock recovery before you attempt OTA.
BerndM14 said:
Vodafone UK? What was the original CID and Version number? VODAP001 and x.xx.161.x ?
COLLECTION of Stock backup's has nandroid backups for both 1.12.161.17 and 1.54.161.5 . The stock recovery is also at that thread though it's only for the 1.54.161.5.
I see it's TWRP nandroid backups though, so hopefully you already have TWRP recovery on. Then just download the nandroid backups, unzip it into the SD card backup folder for TWRP i.e TWRP/Backups/serialnum/ Just replace serialnum with your device serial number and restore nandroid backup. It'll then take you to 1.54.161.5 if there's a new OTA for it then just apply and you have latest then. Just make sure to flash back stock recovery before you attempt OTA.
Click to expand...
Click to collapse
ya think it was that i was after going back to a unbranded stock rom and stock recovery and no root
basically should i be able to flash any stock rom and matching stock recovery (with having super cid and s off) and be back to stock to recieve OTA ect even though the m8 use to be vodafone branded
thanks
brockyneo said:
basically should i be able to flash any stock rom and matching stock recovery (with having super cid and s off) and be back to stock to recieve OTA ect even though the m8 use to be vodafone branded
thanks
Click to expand...
Click to collapse
Yeah you can basically "convert" it to any though you probably won't always get the OTA updates. You'll probably have to end up flashing the OTA update's .zip file from within RUU. I think you'll be fine for OTA's if you do it for example, dev edition, unlock edition, international WWE version, they get updates from HTC itself, the carrier specific OTA's will probably have to be flashed. I say probably because I haven't converted to and from any carrier specific device myself.
But yeah, if you're S-OFF and supercid you can flash just about anything. Careful though... Else the next thread we'll be discussing in is "HELP!!! I THINK I BRICKED MY PHONE!!!!!!" :cyclops:
BerndM14 said:
Yeah you can basically "convert" it to any though you probably won't always get the OTA updates. You'll probably have to end up flashing the OTA update's .zip file from within RUU. I think you'll be fine for OTA's if you do it for example, dev edition, unlock edition, international WWE version, they get updates from HTC itself, the carrier specific OTA's will probably have to be flashed. I say probably because I haven't converted to and from any carrier specific device myself.
But yeah, if you're S-OFF and supercid you can flash just about anything. Careful though... Else the next thread we'll be discussing in is "HELP!!! I THINK I BRICKED MY PHONE!!!!!!" :cyclops:
Click to expand...
Click to collapse
lol thanks ya all i want to do is flash a unbranded wwe stock rom and stock recovery and have the ability to have OTA updates when available (im not bothered about leaving s off or super cid)
so can i follow this http://forum.xda-developers.com/showpost.php?p=53042468&postcount=88
thanks guys sorry for sounding noob just completely different way to what im use too :silly:
right i finally have time today to have a go at this so i have a rooted vodafone branded (arhd rom) and s off and super CID
so am i right in saying that i do the following
change MID to 0P6B10000
remove tampered and re lock bootloader
flash stock firmware (mike1986)
flash stock recovery (mike1986)
flash stock firmware (mike1986)
then all done or is it done another way
thanks
brockyneo said:
right i finally have time today to have a go at this so i have a rooted vodafone branded (arhd rom) and s off and super CID
so am i right in saying that i do the following
change MID to 0P6B10000
remove tampered and re lock bootloader
flash stock firmware (mike1986)
flash stock recovery (mike1986)
flash stock firmware (mike1986)
then all done or is it done another way
thanks
Click to expand...
Click to collapse
There is no need to change your MID unless you are planning to change over to a developer edition. Stock firmware already includes stock recovery. I don't see that you have stock ROM listed.
GermanGuy said:
There is no need to change your MID unless you are planning to change over to a developer edition. Stock firmware already includes stock recovery. I don't see that you have stock ROM listed.
Click to expand...
Click to collapse
Ok I just want to be able to receive OTA too so If I leave mid it should be OK and do I just flash stock firmware then stock rom then dome
Thanks
brockyneo said:
Ok I just want to be able to receive OTA too so If I leave mid it should be OK and do I just flash stock firmware then stock rom then dome
Thanks
Click to expand...
Click to collapse
Oh, I thought you just wanted it back to stock to return for repairs. To receive OTA updates, I believe the CID of your phone must match the CID of the firmware/Stock ROM you are flashing. I don't believe you need to change the MID but it might not hurt. Flash Stock ROM first, the Firmware.
Thought I'd post in here seeing as I'm in the UK so get everything about ROM versions, etc...
There are no RUUs available for the M8 bar a few US carrier ones. It sucks but there are other way around it, and with you being S-OFF you have a lot of options. One is to convert the phone to 100% stock, EU, unbranded but Vodafone will then refuse repair so you'd be stuck paying for it. The other is to use the stock backups on here to go back to the Vodafone build, but if you've flashed a different FW build this will also fail repair if checked.
Regarding the MID, all EU handsets have the same one so you don't ever have to worry about changing it at any point
If you can find one of the Vodafone OTA updates I can knock something up for you but I don't remember seeing anyone posting one...
EddyOS said:
Thought I'd post in here seeing as I'm in the UK so get everything about ROM versions, etc...
There are no RUUs available for the M8 bar a few US carrier ones. It sucks but there are other way around it, and with you being S-OFF you have a lot of options. One is to convert the phone to 100% stock, EU, unbranded but Vodafone will then refuse repair so you'd be stuck paying for it. The other is to use the stock backups on here to go back to the Vodafone build, but if you've flashed a different FW build this will also fail repair if checked.
Regarding the MID, all EU handsets have the same one so you don't ever have to worry about changing it at any point
If you can find one of the Vodafone OTA updates I can knock something up for you but I don't remember seeing anyone posting one...
Click to expand...
Click to collapse
Ah right ok well I'm not looking to return it just want a unbranded stock firmware back on with OTA working for the updates :angel:
Right so I don't need to change mid so what's the best and safestvway to change back to UK stock unbranded rom please with stock recovery and no root
Thanks again sorry :crying:
@EddyOS so if I follow your guide then I should be OK And I'm already rooted with supersu so can I first do the tamper flag and bootloader then flash stock rom ect
Thanks
If you just want to return it to stock, unbranded then yes my guide will do the job
hello guys
i need help my phone m8 won't update ota to 4.4.4 or 4.4.3 m still on 4.4.2
my cid is htc_017 , model id 0P6B10000
no root . no s-off , no unlock
and i want ask if this cid htc_017 for EMEA or US ?
ty
P.R.F.S said:
hello guys
i need help my phone m8 won't update ota to 4.4.4 or 4.4.3 m still on 4.4.2 :crying:
my cid is htc_017 , model id 0P6B10000
no root . no s-off , no unlock
and i want ask if this cid htc_017 for EMEA or US ?
ty
Click to expand...
Click to collapse
near as I can tell your one is from Cinncinati Bell and you'll probably never see an update. It's similar to a T-mobile One if memory serves me right. Anyway you'll need S-OFF to convert your phone to DE or international if you want to receive updates
clsA said:
near as I can tell your one is from Cinncinati Bell and you'll probably never see an update. It's similar to a T-mobile One if memory serves me right. Anyway you'll need S-OFF to convert your phone to DE or international if you want to receive updates
Click to expand...
Click to collapse
is that mean my phone not international ver ?
and can i install rom.zip without s-off like htc m7 or have to on s-off ?
Basically if you want 4.4.4 you will have to unlock s-off convert to a different firmware
P.R.F.S said:
is that mean my phone not international ver ?
and can i install rom.zip without s-off like htc m7 or have to on s-off ?
Click to expand...
Click to collapse
you can flash roms without s-off, but some roms are going to need firmware that's up to date. Your phone will not get that up to date firmware unless you get s-off and do the developer edition conversion ( change CID and MID and flash DE RUU)
As Far as your phone being international it really should not matter as long as it's working on the carrier you use, it is a LTE compatable M8_UL
clsA said:
you can flash roms without s-off, but some roms are going to need firmware that's up to date. Your phone will not get that up to date firmware unless you get s-off and do the developer edition conversion ( change CID and MID and flash DE RUU)
As Far as your phone being international it really should not matter as long as it's working on the carrier you use, it is a LTE compatable M8_UL
Click to expand...
Click to collapse
ok thank u , last question can i install cwm and root files for international ver on my phone or that isn't compatible ?
P.R.F.S said:
ok thank u , last question can i install cwm and root files for international ver on my phone or that isn't compatible ?
Click to expand...
Click to collapse
Yes you can use TWRP and flash GSM Roms
clsA said:
and flash GSM Roms
Click to expand...
Click to collapse
is this rom :
http://www.androidrevolution.org/downloader/download.php?file=One_M8_3.28.401.7_deodexed.zip
compatible with my phone cid is htc_017 , model id 0P6B10000 ?
thank you :good:
P.R.F.S said:
is this rom :
http://www.androidrevolution.org/downloader/download.php?file=One_M8_3.28.401.7_deodexed.zip
compatible with my phone cid is htc_017 , model id 0P6B10000 ?
Click to expand...
Click to collapse
You need to s-off and update firmware to run that ROM, otherwise you will have some serious issues including long (like 5-10 minute) boot times and broken WiFi.
Same is going to happen if you try to run any 4.4.3 Sense based custom ROMs coming from 4.4.2.
Just search and read if want more info on firmware. This has been discussed probably dozens of times on other threads.
clsA said:
Yes you can use TWRP and flash GSM Roms
Click to expand...
Click to collapse
redpoint73 said:
You need to s-off and update firmware to run that ROM, otherwise you will have some serious issues including long (like 5-10 minute) boot times and broken WiFi.
Same is going to happen if you try to run any 4.4.3 Sense based custom ROMs coming from 4.4.2.
Just search and read if want more info on firmware. This has been discussed probably dozens of times on other threads.
Click to expand...
Click to collapse
ok now i am on s-off what is next step? install firmware or GSM Roms ? and where i can find it ?
( cid htc_017 , mid 0P6B10000 )
thank u
P.R.F.S said:
ok now i am on s-off what is next step? install firmware or GSM Roms ? and where i can find it ?
( cid htc_017 , mid 0P6B10000 )
thank u
Click to expand...
Click to collapse
Do you still want to convert the phone to Developer Edition ?
If you want to just use the international firmware their here > http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One_M8/401/
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot
If your looking to convert, you change your CID to BS_US002
and MID to 06PB12000 >> http://forum.xda-developers.com/showthread.php?t=2708581
and then use the RUU here >> http://forum.xda-developers.com/htc-one-m8/development/ruu-developer-edition-3-28-1540-5-t2918749
fastboot oem writecid BS_US002
clsA said:
Do you still want to convert the phone to Developer Edition ?
If you want to just use the international firmware their here > http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One_M8/401/
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot
If your looking to convert, you change your CID to BS_US002
and MID to 06PB12000 >> http://forum.xda-developers.com/showthread.php?t=2708581
and then use the RUU here >> http://forum.xda-developers.com/htc-one-m8/development/ruu-developer-edition-3-28-1540-5-t2918749
fastboot oem writecid BS_US002
Click to expand...
Click to collapse
thank you for this help , but all i need update to 4.4.4 by easiest step! no need to change or convert anything if that not necessary?
thank you again
P.R.F.S said:
ok now i am on s-off what is next step? install firmware or GSM Roms ? and where i can find it ?
( cid htc_017 , mid 0P6B10000 )
thank u
Click to expand...
Click to collapse
Just look in the Development forum section for the threads regarding firmware. You can flash after the fact (after ROM is already installed). But I normally recommend to backup any important data before flashing just about anything "just in case".
redpoint73 said:
Just look in the Development forum section for the threads regarding firmware. You can flash after the fact (after ROM is already installed). But I normally recommend to backup any important data before flashing just about anything "just in case".
Click to expand...
Click to collapse
so can i install this firmware 3.28.401.7.zip ? and need to re-lock bootloader before install firmware or not necessary?
thx
P.R.F.S said:
so can i install this firmware 3.28.401.7.zip ? and need to re-lock bootloader before install firmware or not necessary?
thx
Click to expand...
Click to collapse
Relocking bootloader is not required or suggested.
I'm not sure which firmware goes with your CID. You'll need to research yourself, unless somebody who knows chimes in.
As long as you have a GSM M8, the firmware should be fine. But you may or may not experience some minor network issues, if the firmware is not intended for your carrier.
P.R.F.S said:
so can i install this firmware 3.28.401.7.zip ? and need to re-lock bootloader before install firmware or not necessary?
thx
Click to expand...
Click to collapse
Yes but your s-off go ahead and do the conversion it's very easy
If you want to use the .401 versions just use the CID HTC__001 and MID 0P6B10000
with the instructions i posted above
hi all
my friend tried to update his phone, and all he's got is:
the phone can't boot into recovery. stuck on "entering recovery"
insert coin rom (v 3.0.8) works fine, except the play store!
i tried to flash a new recovery with no success. finally i flash a twrp by captain throwback version 2.8.0.6, and wow it works!
now, i'm wanna to update his M8 to least android version.
fastboot getvar all:
m8_ul
s-on
CID: HTC__K18
MID: 0P6B10000
HBOOT: 3.16.0.0000
version main: empty
settings >> about >> software information:
android version 4.4.2
sense 6.0
InsertCoin version 3.0.8
build number 1.54.401.10
can i simply flash 4.16.401.10 firmware.zip, least TWRP version, ARHD 34.0 (don't worry i don't forget the boot.img )
or
it's better to return to stock and perform software updates?
by the way,
the build number in settings, is the current firmware.zip that installed? or the firmware that the rom based on??
thank's
i read somewhere that its safer to flash firmwares in row, start at 1.54.401.10 then the others in the x.xx.401.xx line
you can also try simply to flash the latest RUU. maybe you get some wifi errors.
i was on 3.xx.401 firmware and installed the 4.x DEV RUU without any errors
yeah the build number in settings shows the rom base.
ok, thanks
erislav said:
yeah the build number in settings shows the rom base.
Click to expand...
Click to collapse
so, i cannot know the exact firmware he has..
i'm asked that because the safest way to update is going back to stock. i found only 1.54.401.5 NAND Backups.
i'm afraid to flash the wrong nand backup..
how can i know which firmware he has?
http://forum.xda-developers.com/showthread.php?t=2701376
If you want to go the save way Try the 1.54.401.x RUU.exe from the thread. Then you should be fine to apply the otas
Dont be to afraid from flashing wrong files in most cases your phone wont get bricked it just dont boot up
erislav said:
http://forum.xda-developers.com/showthread.php?t=2701376
If you want to go the save way Try the 1.54.401.x RUU.exe from the thread. Then you should be fine to apply the otas
Dont be to afraid from flashing wrong files in most cases your phone wont get bricked it just dont boot up
Click to expand...
Click to collapse
sorry about all of my questions but, i found there only 1.54.1540.10 RUU EXE
not 401 ..
TUR_G7 said:
hi all
my friend tried to update his phone, and all he's got is:
the phone can't boot into recovery. stuck on "entering recovery"
insert coin rom (v 3.0.8) works fine, except the play store!
i tried to flash a new recovery with no success. finally i flash a twrp by captain throwback version 2.8.0.6, and wow it works!
now, i'm wanna to update his M8 to least android version.
fastboot getvar all:
m8_ul
s-on
CID: HTC__K18
MID: 0P6B10000
HBOOT: 3.16.0.0000
version main: empty
settings >> about >> software information:
android version 4.4.2
sense 6.0
InsertCoin version 3.0.8
build number 1.54.401.10
can i simply flash 4.16.401.10 firmware.zip, least TWRP version, ARHD 34.0 (don't worry i don't forget the boot.img )
or
it's better to return to stock and perform software updates?
by the way,
the build number in settings, is the current firmware.zip that installed? or the firmware that the rom based on??
thank's
Click to expand...
Click to collapse
Version main is empty because of the older recovery. Try to flash TWRP 2.8.4.0 again.
You can't flash the firmware zip without being S-Off. Sunshine is the only way to do it now, and it costs $25 (totally worth it). Or you could return to stock and take the OTAs. (stock ROM and recovery plus unmodified system partition)
The build number in settings is in fact the ROM base, and not the current firmware version.
xunholyx said:
Version main is empty because of the older recovery. Try to flash TWRP 2.8.4.0 again.
You can't flash the firmware zip without being S-Off. Sunshine is the only way to do it now, and it costs $25 (totally worth it). Or you could return to stock and take the OTAs. (stock ROM and recovery plus unmodified system partition)
The build number in settings is in fact the ROM base, and not the current firmware version.
Click to expand...
Click to collapse
first thanks for your help!
i will try this tomorrow .
on my m8 I bought sunshine (totally worth it) agree
but before i have s-off i'm flashed new firmware.zip (you have to relock your bootloader)
s-off lets you to flash firmware.zip without Signature and without relock
look at this http://forum.xda-developers.com/showthread.php?t=2696282
TUR_G7 said:
first thanks for your help!
i will try this tomorrow .
on my m8 I bought sunshine (totally worth it) agree
but before i have s-off i'm flashed new firmware.zip (you have to relock your bootloader)
s-off lets you to flash firmware.zip without Signature and without relock
look at this http://forum.xda-developers.com/showthread.php?t=2696282
Click to expand...
Click to collapse
Another part of the problem is that HTC updates incrementally. You can't just leap frog from 4.4.2 to 5.0.1.
Once you get S-Off, you can flash a firmware zip from this thread. @Sneakyghost makes his firmware packages so that you don't have to flash each update one at a time. You can just jump to the newest.
But.....from the readout on the earlier post, it is WWE and there is an RUU for that. It is signed, so it should work. It will only get you to 4.4.4. (3.28.401.9 is the newest on this thread). You could try to flash the Lolly firmware after you have updated to this.
Hi Guys,
im on ViperRom 2.5 and want to install LeeDroid Lollipop Rom and for that i need to update to latest HTC WWE 4.16.401.10 firmware.
Can i just flash the Ruu or do i have to change my CID?
I can't read out my main-version, cause of a TWRP bug, i think?
Can anyone tell me what i should do? Thanks!
You need s-off and the correct cid (and mid) then you can flash a wwe ruu.
Or bring the phone back to stock and do the ota to lollipop if it's out/when it gets out and then install the custom rom
Mr Hofs said:
You need s-off and the correct cid (and mid) then you can flash a wwe ruu.
Or bring the phone back to stock and do the ota to lollipop if it's out/when it gets out and then install the custom rom
Click to expand...
Click to collapse
And how can i get back to stock? I don't know my main-version... i only know, that i have T-Mob101 CID but i don't know how to get back to stock
I just went to Software information and i have Version 2.22.401.5 Does that mean im on WWE already? Or is it just the base of the Viperonem8-rom?
I really don't know how to get back to stock i want to go back to stock and get my phone S-off.... Can i just flash one of this nandroid backups from the RUUs, OTAs, Stock TWRP Backups Thread?
CID T-MOB101
3.32.111.3 - TWRP Thanks to Anakha56
4.19.111.2 - TWRP Thanks to DeepBlue23
Click to expand...
Click to collapse
Mikey94 said:
And how can i get back to stock? I don't know my main-version... i only know, that i have T-Mob101 CID but i don't know how to get back to stock
I just went to Software information and i have Version 2.22.401.5 Does that mean im on WWE already? Or is it just the base of the Viperonem8-rom?
I really don't know how to get back to stock i want to go back to stock and get my phone S-off.... Can i just flash one of this nandroid backups from the RUUs, OTAs, Stock TWRP Backups Thread?
Click to expand...
Click to collapse
yes the 2.22.401 is the build of the viper rom. Check the general section, there is a great thread stickied by @exocetdj they are hosting many nandroid backups and a tutorial on how to get back to stock
I know this thread, but how do i know which nandroid backup i need? i can't read my main-version so i don't know which backup i need
Mikey94 said:
I know this thread, but how do i know which nandroid backup i need? i can't read my main-version so i don't know which backup i need
Click to expand...
Click to collapse
You check the list with backups and check the cids. When the cid matches yours you have your main version. Then check your hboot number. The lower the hboot number the lower the main version is.
Example
3.16 = 1.12 and 1.54
3.18 = 2.22 and higher
3.19 = 3.xx and higher
Trying to install Android Revolution HD lolipop, i have tried installing it but it just gets stuck and reboots into recovery. I need newer firmware but i can't find anything that supports my model and cid. Any help would be appreciated. Or can i flash firmware that does not have my cid somehow ? What are my options?
TWRP 2.8.5.0
Current Firmware: 3.11.1700.5
S-OFF
0P6B12000
cidnum: CWS__001 AT&T
I think i figured it out:
http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
Vomer's guide pretty much covers it. You can change your CID since you are s-off. And you can make it SuperCID 11111111, which allows you to flash firmware for any CID (SuperCID essentially "passes" any CID check).
You can also try the firmware for the US Dev Edition. Its Lollipop firmware, and intended to be used on AT&T's network:
http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
iwcarbon said:
Trying to install Android Revolution HD lolipop, i have tried installing it but it just gets stuck and reboots into recovery. I need newer firmware but i can't find anything that supports my model and cid. Any help would be appreciated. Or can i flash firmware that does not have my cid somehow ? What are my options?
TWRP 2.8.5.0
Current Firmware: 3.11.1700.5
S-OFF
0P6B12000
cidnum: CWS__001 AT&T
I think i figured it out:
http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
Click to expand...
Click to collapse
Looks like you're running the GPe conversion. If so, you first need to get back to the Sense partition so follow the 'Back to Sense' thread in General and then flash the Sense-based ROM of your choice (along with matching FW package)
EddyOS said:
Looks like you're running the GPe conversion.
Click to expand...
Click to collapse
Good catch.