Hi,
I have an unlocked Australian HTC 10 (CID:HTC_039)
I've been running Viper 10 from Venom ROMs but sadly that's ceased development. So I'd like to switch over to LeeDroid (or even back to stock rom and root) and get the Oreo update. However as far as I can find HTC haven't released an RUU for my device. So I'm thinking perhaps I could use sunshine to s-off, then change my CID (though I'm not totally sure yet how that is done) and use an RUU that way to get the Oreo update - I should then be able to install LeeDroid as well with Oreo I think as the RUU will give me the firmware for Oreo?
I'm concerned that I could loose my cellular and/or Wi-Fi and other radios though? which would be a serious issue... I read about changing radio firmware - do I need to do this and would it break my connections? perhaps change the radio bands it supports?
Thanks for helping out a total noob!
debatingrooster said:
Hi,
I have an unlocked Australian HTC 10 (CID:HTC_039)
I've been running Viper 10 from Venom ROMs but sadly that's ceased development. So I'd like to switch over to LeeDroid (or even back to stock rom and root) and get the Oreo update. However as far as I can find HTC haven't released an RUU for my device. So I'm thinking perhaps I could use sunshine to s-off, then change my CID (though I'm not totally sure yet how that is done) and use an RUU that way to get the Oreo update - I should then be able to install LeeDroid as well with Oreo I think as the RUU will give me the firmware for Oreo?
I'm concerned that I could loose my cellular and/or Wi-Fi and other radios though? which would be a serious issue... I read about changing radio firmware - do I need to do this and would it break my connections? perhaps change the radio bands it supports?
Thanks for helping out a total noob!
Click to expand...
Click to collapse
Hey, there is an RUU available in the AUS thread. I changed my CID from Vodafone aus to WWE. The only thing you lose is VOLTE. Other than that I get good reception and data. Oreo isn't out yet for Australia so it all depends on what your really want to do with your phone. SOFF was well worth the money for me.
Here is a few links for you to read. Let me know if you have an more questions.
AUS RUU
https://forum.xda-developers.com/htc-10/how-to/australia-htc-10-australian-t3393941/page41
De Brand thread. (how to change CID)
https://forum.xda-developers.com/htc-10/how-to/guide-how-to-drand-convert-htc-10-to-t3374593
yldlj said:
Hey, there is an RUU available in the AUS thread. I changed my CID from Vodafone aus to WWE. The only thing you lose is VOLTE. Other than that I get good reception and data. Oreo isn't out yet for Australia so it all depends on what your really want to do with your phone. SOFF was well worth the money for me.
Here is a few links for you to read. Let me know if you have an more questions.
AUS RUU
https://forum.xda-developers.com/htc-10/how-to/australia-htc-10-australian-t3393941/page41
De Brand thread. (how to change CID)
https://forum.xda-developers.com/htc-10/how-to/guide-how-to-drand-convert-htc-10-to-t3374593
Click to expand...
Click to collapse
Thanks for the reply - Can't believe I never found that RUU... In any case I've used sunshine to S-OFF and changed my CID & MID to accept an RUU for US-Unlocked at the moment. But I can't find an oreo RUU where the MID and CID are known so that I can flash it to get the firmware updated and make it compatible with leedroid (based on oreo)
I've also lost cellular connectivity but that happened before I S-OFFed so I hope that's just fixable by formatting everything...
debatingrooster said:
Thanks for the reply - Can't believe I never found that RUU... In any case I've used sunshine to S-OFF and changed my CID & MID to accept an RUU for US-Unlocked at the moment. But I can't find an oreo RUU where the MID and CID are known so that I can flash it to get the firmware updated and make it compatible with leedroid (based on oreo)
I've also lost cellular connectivity but that happened before I S-OFFed so I hope that's just fixable by formatting everything...
Click to expand...
Click to collapse
Download this ruu zip file
https://androidfilehost.com/?w=files&flid=242523
Rename the file to 2PS6IMG.zip
Place on external SD card
Boot to download mode
Press vol up to flash.
After its flashed Turn phone back on make sure everything is working stock. Then flash latest twrp followed by leedroid.
yldlj said:
Download this ruu zip file
https://androidfilehost.com/?w=files&flid=242523
Rename the file to 2PS6IMG.zip
Place on external SD card
Boot to download mode
Press vol up to flash.
After its flashed Turn phone back on make sure everything is working stock. Then flash latest twrp followed by leedroid.
Click to expand...
Click to collapse
Ok I've done that (haven't done TWRP yet) and cellular is back!!
Thanks heaps - Will update here if there's anymore problems!
So for anyone following along behind it all works fine - although the Oreo update is basically uninteresting IMO. Probably staying on Viper 10 Nougat would have been better...
debatingrooster said:
So for anyone following along behind it all works fine - although the Oreo update is basically uninteresting IMO. Probably staying on Viper 10 Nougat would have been better...
Click to expand...
Click to collapse
Once kernel source is released and we get a custom kernel things will be alot better with battery and customizations.
Here's hoping, although I've never used a custom kernel. Any recommendations for customising apps available for HTC 10 Oreo now?
Thanks for all your help
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) current-slot:
(bootloader) imei: 3542xxxxxxxxxxxx
(bootloader) version-main: 2.42.710.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: VODAP021
Hello i am at the same exact situation with you, being doing a bit of research on how to fix this. this is so far what i learned, flash firmware and flash oreo rom.
currently i am in S-on but i will s-off after i get the whole idea and correct file to do the firmware flashing, the thing is i still not sure how to flash firmware and where to get the correct file, or i have to change my cid and mid to find the matched firmware, mind to guide me in that?
minwater said:
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) current-slot:
(bootloader) imei: 3542xxxxxxxxxxxx
(bootloader) version-main: 2.42.710.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: VODAP021
Hello i am at the same exact situation with you, being doing a bit of research on how to fix this. this is so far what i learned, flash firmware and flash oreo rom.
currently i am in S-on but i will s-off after i get the whole idea and correct file to do the firmware flashing, the thing is i still not sure how to flash firmware and where to get the correct file, or i have to change my cid and mid to find the matched firmware, mind to guide me in that?
Click to expand...
Click to collapse
Hey - so what I did is this:
https://forum.xda-developers.com/showpost.php?p=66750161&postcount=4
But use this firmware instead
https://androidfilehost.com/?fid=818070582850487062
Hope that helps
debatingrooster said:
Hey - so what I did is this:
https://forum.xda-developers.com/showpost.php?p=66750161&postcount=4
But use this firmware instead
https://androidfilehost.com/?fid=818070582850487062
Hope that helps
Click to expand...
Click to collapse
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
---------- Post added at 07:37 AM ---------- Previous post was at 07:36 AM ----------
debatingrooster said:
Hey - so what I did is this:
https://forum.xda-developers.com/showpost.php?p=66750161&postcount=4
But use this firmware instead
https://androidfilehost.com/?fid=818070582850487062
Hope that helps
Click to expand...
Click to collapse
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
what cid and mid i should change to?
minwater said:
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
---------- Post added at 07:37 AM ---------- Previous post was at 07:36 AM ----------
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
what cid and mid i should change to?
Click to expand...
Click to collapse
Right now the custom ROMs for the HTC 10 all seem to be based on Nougat firmware - if you follow the steps I gave you you'll end up with oreo firmware - so if you want a custom rom don't follow those steps - just install it now using TWRP (assuming you are running Nougat at the moment)
debatingrooster said:
Right now the custom ROMs for the HTC 10 all seem to be based on Nougat firmware - if you follow the steps I gave you you'll end up with oreo firmware - so if you want a custom rom don't follow those steps - just install it now using TWRP (assuming you are running Nougat at the moment)
Click to expand...
Click to collapse
i updated my phone to Leedroid 5.1 which is base on oreo, got bootloop and i went back to leedroid 4, and problem occur. can i flash to leedroid 5.0 which is oreo based after i flash the firmware? what cid and mid i should change to?
thank you for your help.!
minwater said:
i updated my phone to Leedroid 5.1 which is base on oreo, got bootloop and i went back to leedroid 4, and problem occur. can i flash to leedroid 5.0 which is oreo based after i flash the firmware? what cid and mid i should change to?
thank you for your help.!
Click to expand...
Click to collapse
Yes you can. You need to be on Oreo firmware for his ROM. you need to S off your phone and change CID, I recommend you follow the guide in the link above, debrand to WWE using RUU.zip. Just follow that guide step by step and once you have the phone running take the OTA to Oreo then flash twrp follwed by leedroid ROM
Edit: because you flashed leedroid rom then went back to Nougat you want have baseband but once your running Oreo rom it will return.
yldlj said:
Yes you can. You need to be on Oreo firmware for his ROM. you need to S off your phone and change CID, I recommend you follow the guide in the link above, debrand to WWE using RUU.zip. Just follow that guide step by step and once you have the phone running take the OTA to Oreo then flash twrp follwed by leedroid ROM
Edit: because you flashed leedroid rom then went back to Nougat you want have baseband but once your running Oreo rom it will return.
Click to expand...
Click to collapse
now my phone is rooted, so step by stem is
1. S-off using sunshine
2. change CID and MID to HTC_001 and 2ps620000 (by the guide)
3.Flash RUU
https://androidfilehost.com/?w=files&flid=242523
tell me if the file is correct. there is 2 which one?
4.flash custom recovery again (i am using 3.2.1-2)
5.flash custom rom
let me know if something wrong thank you:angel:
minwater said:
now my phone is rooted, so step by stem is
1. S-off using sunshine
2. change CID and MID to HTC_001 and 2ps620000 (by the guide)
3.Flash RUU
https://androidfilehost.com/?w=files&flid=242523
tell me if the file is correct.
4.flash custom recovery again (i am using 3.2.1-2)
5.flash custom rom
let me know if something wrong thank you:angel:
Click to expand...
Click to collapse
Wrong RUU. there is no RUU for WWE yet and that RUU won't flash unless you have Oreo firmware. So like I said follow the debrand to WWE using RUU.zip. the RUU is posted in that thread all you have to do is follow the Instructions. Once everything is done and you have flashed the RUU boot the phone up (you won't have radio) use Wi-Fi to take the OTA to Oreo. Flash latest twrp because RUU will flash stock recovery then flash leedroid ROM.
So steps would be
1: Obtain S OFF
2: Change CID to HTC__001, MID is the same so don't need to change that.
3: FLASH 2.41.401.41 RUU
4: Take OTA
5: Flash latest twrp, a new twrp was posted yesterday
6: Flash Leedroid.
yldlj said:
Wrong RUU. there is no RUU for WWE yet and that RUU won't flash unless you have Oreo firmware. So like I said follow the debrand to WWE using RUU.zip. the RUU is posted in that thread all you have to do is follow the Instructions. Once everything is done and you have flashed the RUU boot the phone up (you won't have radio) use Wi-Fi to take the OTA to Oreo. Flash latest twrp because RUU will flash stock recovery then flash leedroid ROM.
So steps would be
1: Obtain S OFF
2: Change CID to HTC__001, MID is the same so don't need to change that.
3: FLASH 2.41.401.41 RUU
4: Take OTA
5: Flash latest twrp, a new twrp was posted yesterday
6: Flash Leedroid.
Click to expand...
Click to collapse
thank you! s-off ed, doing the OTA now!! should b alright ad i guess?
minwater said:
thank you! s-off ed, doing the OTA now!! should b alright ad i guess?
Click to expand...
Click to collapse
Should be all good. After OTA boot the phone make sure everyone is working. If you want to after that flash twrp then leedroid. :good:
yldlj said:
Should be all good. After OTA boot the phone make sure everyone is working. If you want to after that flash twrp then leedroid. :good:
Click to expand...
Click to collapse
a question, the main point of s-off is we r able to flash the firmware ourself? but to match the firmware we need the same CID and MID, am i correct?
minwater said:
a question, the main point of s-off is we r able to flash the firmware ourself? but to match the firmware we need the same CID and MID, am i correct?
Click to expand...
Click to collapse
Yes. modified firmwares as well. As you took OTA to Oreo there is no need to flash any firmware.
Related
Hello Everyone, i´ve just installed Android revolution on my HTC M9 with TWRP. S-on, unlocked bootloader, OS-2.10.161.7. It says its installed find and all that but when i reboot it normally it send me straitgt to the screen where i can choose between: REBOOT
Reboot to Bootloader
Boot to Download Mode
Boot to Recovery
Power Down
I just cant seem to find my mistake and i cant use the phone and i need it since this is my only Phone i have.
ARHD 6.0 requires a 3.xx firmware...
Also....what version of TWRP did you use...
(needs to be the latest beta from captain's twrp thread)
Lastly....did you allow TWRP to install superuser prior to boot ?? (Will bootloop)...
Check those items....g
gregsarg said:
ARHD 6.0 requires a 3.xx firmware...
Also....what version of TWRP did you use...
(needs to be the latest beta from captain's twrp thread)
Lastly....did you allow TWRP to install superuser prior to boot ?? (Will bootloop)...
Check those items....g
Click to expand...
Click to collapse
I´m using ARHD 20.0 and my TWRP is 2.8.5.0 and Yes after installing ARHD 20.0 it asked me if i want to Root the Device and I accepted it.
C:\adb>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: 123456789
(bootloader) version-main: 2.10.161.7
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440601_86.09.50723G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: VODAP102
all:
finished. total time: 0.016s
Maybe this could hel a little
You need to update your firmware to 3.xx.
Your recovery is not the correct version....and you flashed an incompatible version of SU....
Flash the appropriate firmware...
Then reflash the rom...
Then flash the correct SU via the new recovery...
Do not allow TWRP to install SU...
That is flashed by you...
Read and re-read the threads pertaining to ARHD...and recovery...
It's all there....
And now we know why the device doesn't run...g
gregsarg said:
You need to update your firmware to 3.xx.
Your recovery is not the correct version....and you flashed an incompatible version of SU....
Flash the appropriate firmware...
Then reflash the rom...
Then flash the correct SU via the new recovery...
Do not allow TWRP to install SU...
That is flashed by you...
Read and re-read the threads pertaining to ARHD...and recovery...
It's all there....
And now we know why the device doesn't run...g
Click to expand...
Click to collapse
thanks for the help, ive just had a look but the latest firmware update is 1.40.161.8 -> 2.10.161.7 and thats it, i think ill just have to wait till it´s been released, ive installed the 5.1 with arhd 14.0 so ill just wait and till they released it.
gregsarg said:
You need to update your firmware to 3.xx.
Your recovery is not the correct version....and you flashed an incompatible version of SU....
Flash the appropriate firmware...
Then reflash the rom...
Then flash the correct SU via the new recovery...
Do not allow TWRP to install SU...
That is flashed by you...
Read and re-read the threads pertaining to ARHD...and recovery...
It's all there....
And now we know why the device doesn't run...g
Click to expand...
Click to collapse
can you post the links in here i need, i cant find them somehow and i wanna make sure that i´m using the right ones
ARHD 6.0 requires a 3.xx firmware...
i am in the same position as you mate you cannot install ARHD 6.0 as it requires a 3.xx firmware... you have to make sure the rom you want to install has the correct or corresponding firmware on your device first so if you want to install that rom you will need to update your firmware to 3.xx and as you are s-on you can only install the official over the air (ota) update which will update your firmware aswell so to do this you will need to install the stock 2.10.xxx.xx rom i would use the 2.10.401.1 software that will take you back to stock you then need to relock your bootloader and then update your device with the official ota updater from vodaphone which i am still waiting for is due very soon once you have done that you can re unlock your bootlaoder install twrp again and now as you will have 3.xx.xxx.x or 3.05.xxx.x (not sure of the software no as it has not been released in the uk yet for vodaphone devices it may have been released for other countries or the us im not sure) you could however also s-off your device using sunshine update your firmware to 3.xx.xxx.x and then update your rom pm me if you are still stuck as we both have the same phone and problem and version firmware and software
stretch1974 said:
i am in the same position as you mate you cannot install ARHD 6.0 as it requires a 3.xx firmware... you have to make sure the rom you want to install has the correct or corresponding firmware on your device first so if you want to install that rom you will need to update your firmware to 3.xx and as you are s-on you can only install the official over the air (ota) update which will update your firmware aswell so to do this you will need to install the stock 2.10.xxx.xx rom i would use the 2.10.401.1 software that will take you back to stock you then need to relock your bootloader and then update your device with the official ota updater from vodaphone which i am still waiting for is due very soon once you have done that you can re unlock your bootlaoder install twrp again and now as you will have 3.xx.xxx.x or 3.05.xxx.x (not sure of the software no as it has not been released in the uk yet for vodaphone devices it may have been released for other countries or the us im not sure) you could however also s-off your device using sunshine update your firmware to 3.xx.xxx.x and then update your rom pm me if you are still stuck as we both have the same phone and problem and version firmware and software
Click to expand...
Click to collapse
Hey, I´ve just decided to stay like that on ARHD 14.0 untill there is a firmware update for my 2.10.161.7 because I dont want to destroy my system and I changed my status to S-off now.
You can do the firmware update now you are s-off let me know if you wa t to know where to get it and how to do it I am doing the same I am already preparing for it just waiting to pay for s-off and I will be doing it
Gents...
No need to relock your bootloaders for OTA..
ALL YOU NEED...is a stock system image and recovery...g
Edit:
The reason for leaving the bootloader unlocked is simple...
If any part of system is not correct when you relock....you will be unable to unlock again later...g
can anyone give me a little guide how to update the firmware with s-off
gray21312 said:
can anyone give me a little guide how to update the firmware with s-off
Click to expand...
Click to collapse
Read the information below very carefully....then read it again....
Not trying to sound rude or condescending.....but firmware flashing can be a brick level event if the wrong software is used etc....
A lot of information here....and I've never found a better written thread...
Read read read.....and happy flashing....(go to first page of thread)...
Standard disclaimers apply...and you do this at your own risk....g
http://forum.xda-developers.com/showthread.php?t=3068243
gregsarg said:
Read the information below very carefully....then read it again....
Not trying to sound rude or condescending.....but firmware flashing can be a brick level event if the wrong software is used etc....
A lot of information here....and I've never found a better written thread...
Read read read.....and happy flashing....(go to first page of thread)...
Standard disclaimers apply...and you do this at your own risk....g
http://forum.xda-developers.com/showthread.php?t=3068243
Click to expand...
Click to collapse
Okay litte update, I´m busy downloading the 2.10.161.7 Stock recovery. I´ve changed my Cid Mid to stock, reflashed the stock recovery and locked my bootloader. I hope it´ll work out. I´ll keep you up to date
Hy guys, i hope someone can help me with this one.
I try the other days to root my phone, and all got smoth, then i update my firmware because WiFi will not work and i read somewhere that will be problem. And i update my firmware too, all was good, everything instaled sucefull but when i try to open it stay blocked on main screen. How to make more clear than that? The phone freeze where the HTC logo appear, i can't do anything more than that.
Some info i can get from fastboot:
*** Software status: Modified ***
*** RELOCKED ***
M8_UL_CA PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.21.213311491.A04G
OpenDSP-v47.2.2-00564-M8974_F0.1024
OS-3.11.1700.5
eMMC- boot 2048MB
I think when i installed the firmware the proces delete everything on my phone, i dont have recovery or anything else. Can someone help please to restore to stock? Or at least to a soft that my phone to work?
Thanks! (And sorry for my bad english, not my first language)
pant3ras said:
Hy guys, i hope someone can help me with this one.
I try the other days to root my phone, and all got smoth, then i update my firmware because WiFi will not work and i read somewhere that will be problem. And i update my firmware too, all was good, everything instaled sucefull but when i try to open it stay blocked on main screen. How to make more clear than that? The phone freeze where the HTC logo appear, i can't do anything more than that.
Some info i can get from fastboot:
*** Software status: Modified ***
*** RELOCKED ***
M8_UL_CA PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.21.213311491.A04G
OpenDSP-v47.2.2-00564-M8974_F0.1024
OS-3.11.1700.5
eMMC- boot 2048MB
I think when i installed the firmware the proces delete everything on my phone, i dont have recovery or anything else. Can someone help please to restore to stock? Or at least to a soft that my phone to work?
Thanks! (And sorry for my bad english, not my first language)
Click to expand...
Click to collapse
You still have KitKat firmware, as shown by your OS version. You CANNOT flash a modified firmware package while S-On. You need to either run a signed RUU, or go back to stock and use HTC's/your carrier's OTA updates.
Do you have a stock ruu? or maybe how to s-off? because i cant find anywhere firewater.
Maybe this will help with something:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.057s
So can anybody can help me? Please i am stuck on this. And when i want to flash the RUU from AT&T i still get the error 155: Unknow Error. Can someone help me? Please.
What firmware did you try to flash? It looks like it was GPE firmware.
Is your bootloader screen black or white now?
My bootloader screen it's black, it's that important?...
And the firmware was download from HDRevolution website.
pant3ras said:
My bootloader screen it's black, it's that important?...
Click to expand...
Click to collapse
Yup, that's very important. Black hboot screen is the GPE version (and white is Sense version hboot). You at least partially flashed a GPE firmware. This isn't supposed to happen with s-on (firmware for other versions should be blocked). But I do remember a while back, a few folks having the same issue; where a GPE firmware or RUU partially flashed (with s-on) and caused some problems.
pant3ras said:
And the firmware was download from HDRevolution website.
Click to expand...
Click to collapse
That doesn't help. Quite a few firmwares are posted there. What specific number firmware did you flash? Did you flash the firmware number (3.11.1700.5) shown OS number on your hboot screen?
---------- Post added at 12:03 PM ---------- Previous post was at 12:03 PM ----------
pant3ras said:
And when i want to flash the RUU from AT&T i still get the error 155: Unknow Error.
Click to expand...
Click to collapse
What RUU (file name) are you trying to flash?
redpoint73 said:
That doesn't help. Quite a few firmwares are posted there. What specific number firmware did you flash? Did you flash the firmware number (3.11.1700.5) shown OS number on your hboot screen?
Click to expand...
Click to collapse
The firmware i flash was 3.11.1700.5 yes.
redpoint73 said:
What RUU (file name) are you trying to flash?
Click to expand...
Click to collapse
That from the official page, this one:
"RUU_M8_UL_L50_SENSE60_ATT[email protected]_40.45.C33065.00_F_release_446225_signed_2"
And also i was trying with this one:
RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4 I dont know where exactly i find this one, but this one like the one above give me the same error, now and before trying rooting my htc.
pant3ras said:
The firmware i flash was 3.11.1700.5 yes.
Click to expand...
Click to collapse
I don't know why you flashed this. Not only is it not current firmware (Kitkat, as another noted before), but its not even for your version (its GPE version firmware, as I mentioned).
pant3ras said:
That from the official page, this one:
"RUU_M8_UL_L50_SENSE60_ATT[email protected]_40.45.C33065.00_F_release_446225_signed_2"
Click to expand...
Click to collapse
That is the proper RUU for the AT&T version; and your bootloader is relocked, as it should be for RUU.
So I think the problem is the GPE firmware you flashed before.
Try flashing the proper firmware first, then RUU again, and hopefully that will work.
I can't find the 4.28.502.2 firmware. But 4.28.502.1 firmware is posted on the following. Use the Full stock firmware. Hopefully, this is close enough to 4.28.502.2 to work.
EDIT: Forgot to post the firmware link: https://docs.google.com/spreadsheets/d/1aNd_nm4Em1wamRLFT7qHM2c3O9_sg_H3ztBrGq1u9Ws/pubhtml
pant3ras said:
And also i was trying with this one:
RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4 I dont know where exactly i find this one, but this one like the one above give me the same error, now and before trying rooting my htc.
Click to expand...
Click to collapse
That RUU will not work, anyway. Its for the Developer Edition, so the only way to run it would be to change your CID (s-off required, and working OS is needed to s-off).
---------- Post added at 01:02 PM ---------- Previous post was at 01:00 PM ----------
pant3ras said:
or maybe how to s-off? because i cant find anywhere firewater.
Click to expand...
Click to collapse
Firewater was discontinued by its devs in December 2014. Since it has an online component (needed to connect to servers), it won't work even if you find the firewater binary.
Sunshine is the only current working s-off method, and as I mentioned, it requires a working OS to work.
redpoint73 said:
I don't know why you flashed this. Not only is it not current firmware (Kitkat, as another noted before), but its not even for your version (its GPE version firmware, as I mentioned).
Click to expand...
Click to collapse
I flash that firmware because have my cidnum and modelid, and i read that the firmware need to have the same cidnum and modelid.
redpoint73 said:
I can't find the 4.28.502.2 firmware. But 4.28.502.1 firmware is posted on the following. Use the Full stock firmware. Hopefully, this is close enough to 4.28.502.2 to work
Click to expand...
Click to collapse
Where can i find this firmware?
And i didn't know that firewater doesnt work anymore, and sunshine i think you have to pay 25$ per month, right?
pant3ras said:
I flash that firmware because have my cidnum and modelid, and i read that the firmware need to have the same cidnum and modelid.
Click to expand...
Click to collapse
Yes, firmware needs to have the same CID and MID. But the 3.11.1700.5 firmware doesn't go with your CID and MID (CWS__001 and 0P6B12000)
"1700" firmwares (such as 3.11.1700.5) are for the Google Play Edition (GPE) with CID of GOOGL001 and MID of 0P6B17000.
Proper firmwares for your AT&T CID and MID will have the number "502" in the position x.xx.502.x
pant3ras said:
Where can i find this firmware?
Click to expand...
Click to collapse
Sorry, forgot to post the link. I had the page open, and everything: https://docs.google.com/spreadsheets/d/1aNd_nm4Em1wamRLFT7qHM2c3O9_sg_H3ztBrGq1u9Ws/pubhtml
pant3ras said:
And i didn't know that firewater doesnt work anymore, and sunshine i think you have to pay 25$ per month, right?
Click to expand...
Click to collapse
That's right. And as I already stated, sunshine requires a working OS, which you don't have. And since getting the OS working again seems to be the main reason you want to get s-off, you see its quite pointless.
redpoint73 said:
Sorry, forgot to post the link. I had the page open, and everything: https://docs.google.com/spreadsheets/d/1aNd_nm4Em1wamRLFT7qHM2c3O9_sg_H3ztBrGq1u9Ws/pubhtml.
Click to expand...
Click to collapse
No problem And to flash this firmware i can do it like this:
f you are S-ON ---> Re-lock your bootloader (this will most probably wipe content of your device)
If you are S-OFF ---> no need to re-lock the bootloader.
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet or in case it's S-ON)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
Click to expand...
Click to collapse
pant3ras said:
No problem And to flash this firmware i can do it like this:
Click to expand...
Click to collapse
Yes, exactly.
redpoint73 said:
Yes, exactly.
Click to expand...
Click to collapse
I get this error when i try to flash the firmware:
C:\adb>fastboot flash zip firmware.zip
target reported max download size of 1826418688 bytes
sending 'zip' (57484 KB)...
OKAY [ 2.570s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 5.611s
Click to expand...
Click to collapse
pant3ras said:
I get this error when i try to flash the firmware:
Click to expand...
Click to collapse
You used the "full stock" firmware 4.28.502.1, correct? Not the "Combined, No wipe" one?
You can also try the 3.42.502.1 firmware.
redpoint73 said:
You used the "full stock" firmware 4.28.502.1, correct? Not the "Combined, No wipe" one?
You can also try the 3.42.502.1 firmware.
Click to expand...
Click to collapse
Yes, i use the full stock firmware. Now i will try with 3.42.502.1
Later edit: I get the same error when i try with the 3.42.502.1 stock
pant3ras said:
Yes, i use the full stock firmware. Now i will try with 3.42.502.1
Later edit: I get the same error when i try with the 3.42.502.1 stock
Click to expand...
Click to collapse
Those might be unsigned firmwares, but I thought they were signed.
I think your options at this point:
1) Find signed firmwares of the versions I recommended.
2) Unlock the bootloader again, flash TWRP again, then flash a 3.xx based custom or stock ROM (which will have working WiFi). Then s-off by sunshine so you can fix the firmware (will allow an unsigned firmware to be flashed).
Another thing to note, when you flashed the GPE firmware, it reverted the recovery back to stock recovery. Which is why you no longer have custom recovery.
redpoint73 said:
Those might be unsigned firmwares, but I thought they were signed.
I think your options at this point:
1) Find signed firmwares of the versions I recommended.
2) Unlock the bootloader again, flash TWRP again, then flash a 3.xx based custom or stock ROM (which will have working WiFi). Then s-off by sunshine so you can fix the firmware (will allow an unsigned firmware to be flashed).
Another thing to note, when you flashed the GPE firmware, it reverted the recovery back to stock recovery. Which is why you no longer have custom recovery.
Click to expand...
Click to collapse
And how i can unlock the bootloader again? and flash the TWRP?
pant3ras said:
And how i can unlock the bootloader again? and flash the TWRP?
Click to expand...
Click to collapse
Unlock the bootloader by HTCDev.com. Then flash TWRP with fastboot.
redpoint73 said:
Unlock the bootloader by HTCDev.com. Then flash TWRP with fastboot.
Click to expand...
Click to collapse
Ok, i succed to instal the TWRP and i unlock the phone, but i have no ideea what rom to instal. Can you help me with that please? I'm scare i will broke my phone again if i install something on my own again )
Hi Folks,
I wonder if anyone can point me in the right direction please. Here's the story:
I bought a T-mobile branded HTC One M9
Changed it to WWE and ran with a it for a while without issue
Changed to Dev edition and applied the Android7OTA.zip (4.14.617.6) then TWRP, currently running without issue.
I got a notification of another OTA (4.19.617.1) earlier this evening.
Flashed the stock recovery I extracted from the android 7 dev RUU
Downloaded the OTA on the phone and once the phone booted into the stock recovery, I'm told:
'this package is for "htc_himaulatt" devices; this is a "htc_himauhl". Installation aborted'
Fastboot getvar all currently shows:
(bootloader) kernel: lk
(bootloader) product: htc_himaulatt
(bootloader) version: 1.0
(bootloader) serialno: xxxx
(bootloader) current-slot:
(bootloader) imei: xxxx
(bootloader) version-main: 4.14.617.6
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440971_103.00.61018G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA11000
(bootloader) cid: BS_US001
I've read of using a cid of BS_US002, I've changed to that and retried applying the OTA, but it did the same (so I changed it back).
Assuming the Product reported by fastboot is what's being checked... fastboot's reporting it's already set to what the stock recovery seems to be saying it needs to be. It was happy flashing the first RUU, I'm not sure what might be different this time round.
I bet there's a small thing I might need to change, but I don't know what.
Does anyone else please?
Also.. I've not found much info at all about the OTA to 4.19.617.1. Is it new enough that me somehow getting it off the phone (will probably need brief instructions) could be useful to anyone?
TIA!
Currently having the same problem.
Will post here if i have any luck.
Thanks philicibine.
I've just tried it with supercid too (fastboot oem writecid 11111111), but it didn't do the trick.
Before the phone reboots into the stock recovery, it says ''we have determined that your phone may be running a modified version of its system software....'.
ok so my phone is currently accepting the update!
The problem for me was I had installed TWRP. In trying to restore the stock recovery i was restoring the one from the NoWipe firmware file i used to upgrade to Nougat.
To solve, I extracted the recovery.img from the OTA.zip and flashed that.
Almost finished updating!
here is the recovery.img if you want to try it >> https://drive.google.com/open?id=0BzkydKcZdx9YWW55UDlIOV95UDA
philicibine said:
ok so my phone is currently accepting the update!
The problem for me was I had installed TWRP. In trying to restore the stock recovery i was restoring the one from the NoWipe firmware file i used to upgrade to Nougat.
To solve, I extracted the recovery.img from the OTA.zip and flashed that.
Almost finished updating!
here is the recovery.img if you want to try it >> https://drive.google.com/open?id=0BzkydKcZdx9YWW55UDlIOV95UDA
Click to expand...
Click to collapse
It was the stock recovery from the first android7 devRUU that I've been trying this with. Which OTA did you get this one from?
I've flashed it and the newest OTAs downloading again as I type..
edit: the file you posted a link to (thanks!) and the recovery I was originaly using are definitely different... My phones just failed to apply the update again, but given a different reason 'system parition has unexpected contents'. Guess I've not left system untouched as I thought.
I've just tried extracting system from the original devAndroid7RUU.zip and now I'm getting errors about it not being able to decrypt the .zip.. so must have somehow taken the recovery from another RUU.zip earlier this evening (which wouldn't have been a devRUU, but a WWE-explaining why it reported my phone didnt match the dev edition details). I was doing it remotely form work, while working-must be more careful, I guess.
This means I cant extract system from the right RUU.zip though.
I think I could flash the RUU.zip again (wiping everything, grrr), then let it install the later OTA before doing anything that could amend system.
I'd realy like to not wipe it if posible though.
How did you get the recovery you posted out of the OTA.zip please?
It maybe the same recovery then as I got it from the Dev ota. Seemed to work for me. Maybe you could flash the nowipe firmware and then this if it doesn't work?
---------- Post added at 10:53 PM ---------- Previous post was at 10:40 PM ----------
mad_tunes said:
How did you get the recovery you posted out of the OTA.zip please?
Click to expand...
Click to collapse
I simply unzipped it. It was in the firmware.zip archive inside the OTA.zip
I'm pretty confident the two recovery's are different, my phone does different things with the OTA depanding on which of the recovery's I've flashed.
I used 'HTC_RUU_Decrypt_Tool_3.1.0-WINDOWS64' to extract the recovery from what I thought was the devRUU.zip. This wont open the devRUU.zip now though, so I must have had it extract the wrong RUU earlier.
I've just flashed the stock android7 firmware and the recovery you posted a link to and the OTAs re-downloading
Edit:
I'm still in the same situation, it's reporting system's modified
I think I might just RUU it again. I need my phone running and set up over the next few days though, so it'll have to wait until Christmas is out the way.
Many thanks for your help though.
Do you see many differences after you've applied it?
(And I managed to type ota instead of ruu in the op, I've amended)
Hey guys,
I'm having the exact same issue. The way I was working it around was flashing the update via RUU from laptop but now I'm tired kf doing that every time when there is an update. I will restore my factory recovery and will try it again. After I've done so, I'll get back to you about it.
Best Regards
I couldn't sleep last night, so went for it with the DevRUU.zip I originally used..
It flashed fine as before, then my phone downloaded and applied the OTA just fine.
I couldn't get SuperSU to install properly afterwards though, so restored a TWRP backup so I could use my phone today.
I've been getting the OTA notification repeatedly during the day today though. Seems you can only postpone it for up to 4 hours, rather than dismiss it or turn off checking entirely. It's annoying.
So, I might give it another go pretty soon!
I just RUUd again and then did the OTA.
SuperSU-v2.65 (that I was using pre-OTA) woudn't install, showing 'Patching secpol. Failed. Arborting'
SuperSU-v2.79 installed just fine.
Sorted.
Hey guys. Just went to stock recovery. Unzipped from ota.zip>installed it>recovery works>phone reboot into system>finds the new update>starts to install>rebokts to recovery>starts updating up to 24%25% and then gets me back to recovery saying there is some error. What should I do? I don't want to update via RUU. Thanks
dohcvtec said:
Hey guys. Just went to stock recovery. Unzipped from ota.zip>installed it>recovery works>phone reboot into system>finds the new update>starts to install>rebokts to recovery>starts updating up to 24%25% and then gets me back to recovery saying there is some error. What should I do? I don't want to update via RUU. Thanks
Click to expand...
Click to collapse
100% working method. keep these conditions and everything is working and updated - unlocked cid BS__US001 S-OFF mid 0PJA11000. then install from sd card 0PJAIMG nougat download the update OTA 4.19.617.1 and everything is fine to install without errors!!!!!!!!!!!! check for yourself!!!!!
asar201 said:
100% working method. keep these conditions and everything is working and updated - unlocked cid BS__US001 S-OFF mid 0PJA11000. then install from sd card 0PJAIMG nougat download the update OTA and everything is fine to install without errors!!!!!!!!!!!! check for yourself!!!!!
Click to expand...
Click to collapse
But if I follow those steps, this means fresh new install of the os which is basically the same as RUU install. Or you nent something else? Thanks
P. S. I just fully unrooted my phone so now it is exactly the way you described above but the new update still doesn't install. It gives me this error and I don't understand why: 'system parition has unexpected contents'
dohcvtec said:
But if I follow those steps, this means fresh new install of the os which is basically the same as RUU install. Or you nent something else? Thanks
P. S. I just fully unrooted my phone so now it is exactly the way you described above but the new update still doesn't install. It gives me this error and I don't understand why: 'system parition has unexpected contents'
Click to expand...
Click to collapse
hi.a poor understanding of English and how to correctly put on this site files. I had the same problem. phone-htc__a07 no rooted android 6.0 twrp recovery. OTA updates do not come to android 7.0. write step by step what did was changed the cid to BS__US001,mid on 0PJA11000.restored twrp backup http://forum.xda-developers.com/one-m9/development/one-m9-4-14-617-6-stock-root-twrp-backup-t3518149 then came the notice about the ota updates until they 4.19.617.1 but I have not installed the same as yours.https://drive.google.com/drive/folders/0BwrbLN0SdCTgQ2NseVMtdDhXV3c?usp=sharing I flashed these recovery and firmware and after that everything was installed.try. flash a twrp backup of course is not necessary if you already is 7.0 skip this step...
Hello,
Reporting back.
So what I did was, I took the RUU, flashed RUU, then updated to the newest update with no problem. Had no issues restoring my phone exactly how it was before to flash the RUU. Phone restored automatically from google account. The only thing which didn't restore was my wallpaper (like I care about it ). So that's it. Thank you very much for your help.
Best Regards
dohcvtec said:
Hello,
Reporting back.
So what I did was, I took the RUU, flashed RUU, then updated to the newest update with no problem. Had no issues restoring my phone exactly how it was before to flash the RUU. Phone restored automatically from google account. The only thing which didn't restore was my wallpaper (like I care about it ). So that's it. Thank you very much for your help.
Best Regards
Click to expand...
Click to collapse
couldn't tell what ruu was flashed? and what was your cid and mid?
asar201 said:
couldn't tell what ruu was flashed? and what was your cid and mid?
Click to expand...
Click to collapse
The RUU that I flashed is the official version from HTC website. Flashed it through laptop. CID BS_US001 MID 0PJA11000
dohcvtec said:
The RUU that I flashed is the official version from HTC website. Flashed it through laptop. CID BS_US001 MID 0PJA11000
Click to expand...
Click to collapse
thanks for inform ))))
I just wanted to add to the list of install methods. Here is what I attempted.
All attempts with MID 0PJA11000:
Rooted 4.14.617.6 with TWRP recovery and CID BS_US001 - OTA failed (doesnt hurt to try )
Flashing RUU 4.14.617.6.exe with CID BS_US001 - OTA failed
Flashing RUU 4.14.617.6.exe with CID 11111111 - OTA failed
Flashing RUU 4.14.617.6.zip with CID 11111111 - OTA failed
After the above line and changing the CID to BS_US001 - successful
It appears you must run an ruu.zip to accept the OTA no matter what. Strange the exe's will not work. It also appears the master CID no longer works. Surprisingly I was able to change the CID after running the .zip install and still accept the OTA with no problems.
asar201 said:
100% working method. keep these conditions and everything is working and updated - unlocked cid BS__US001 S-OFF mid 0PJA11000. then install from sd card 0PJAIMG nougat download the update OTA 4.19.617.1 and everything is fine to install without errors!!!!!!!!!!!! check for yourself!!!!!
Click to expand...
Click to collapse
asar201 I did want to ask and make sure, did you use double __ in your CID or just one _?
BrownEye02 said:
I just wanted to add to the list of install methods. Here is what I attempted.
All attempts with MID 0PJA11000:
Rooted 4.14.617.6 with TWRP recovery and CID BS_US001 - OTA failed (doesnt hurt to try )
Flashing RUU 4.14.617.6.exe with CID BS_US001 - OTA failed
Flashing RUU 4.14.617.6.exe with CID 11111111 - OTA failed
Flashing RUU 4.14.617.6.zip with CID 11111111 - OTA failed
After the above line and changing the CID to BS_US001 - successful
It appears you must run an ruu.zip to accept the OTA no matter what. Strange the exe's will not work. It also appears the master CID no longer works. Surprisingly I was able to change the CID after running the .zip install and still accept the OTA with no problems.
asar201 I did want to ask and make sure, did you use double __ in your CID or just one _?
Click to expand...
Click to collapse
Hello...a double underline!!! you and all who can help spread the link twrp backup, installed the OTA to 4.19.617.1. those who are not from Russia in the file, replace gps.conf data on your country,because in my backup it changed to ru.pool.ntp.org for a quick search of satellites in twrp recovery without installing a root file Manager copy the modified gps.conf (system\etc). p.s. Change CID (only if S-OFF) fastboot oem writecid BS__US001 reboot fastboot Change MID (only if there is S-OFF) fastboot oem writemid 0PJA11000 fastboot reboot. there's also posted the stock recovery and firmware. if you wish to flash from sd card file rom.zip folder 4.14.617.6 RUU rename 0PJAIMG.zip and copy to sd card restart your device in download mode. don't know what else to add... ))) if you have any questions...write. https://drive.google.com/drive/folders/0BwrbLN0SdCTgQ2NseVMtdDhXV3c?usp=sharing
I want international Gsm (401) Ruu stock rom to flash my htc one m9 (nougat 7.0)
[email protected] said:
I want international Gsm (401) Ruu stock rom to flash my htc one m9 (nougat 7.0)
Click to expand...
Click to collapse
U should read Flippy 's thread, all u need is there.
https://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Post 5
Remember, ruu's will wipe your phone, so always backup first.
(moderators will move your thread in the questions section as here is developing section)
none of them are suitable for my device , i need 44.28.401.3 version of stock rom (its neither At&t nor verizon , its European version (international gsm) ,i tried every frimware from htc /us/support/downloads of m9 none of them had worked
[email protected] said:
none of them are suitable for my device , i need 44.28.401.3 version of stock rom (its neither At&t nor verizon , its European version (international gsm) ,i tried every frimware from htc /us/support/downloads of m9 none of them had worked
Click to expand...
Click to collapse
There is no 44.28.401.3 issued. Are u sure u have an m9?
There is an 4.28.401.3 :
https://www.androidfilehost.com/?fid=817550096634758268
Fain11 said:
There is no 44.28.401.3 issued. Are u sure u have an m9?
There is an 4.28.401.3 :
https://www.androidfilehost.com/?fid=817550096634758268
Click to expand...
Click to collapse
Sorry for the typo it's 4.28.401.3
Can you please explain me how to install after downloading this rom ?
[email protected] said:
Sorry for the typo it's 4.28.401.3
Can you please explain me how to install after downloading this rom ?
Click to expand...
Click to collapse
That is not a rom. It's a RUU. It will wipe all data from your phone.
The thread I mentioned before has all info needed about flashing RUUs.
Don't flash anything before understand what u do.
Good luck!
Which RUU can I use to get back to stock?
S-ON
fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: xxxxx
(bootloader) version-main: 3.35.401.12
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440792_97.00.51203G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: HTC__032
kbal said:
Which RUU can I use to get back to stock?
Click to expand...
Click to collapse
Please read the ReadMe thread. It will answer your question.
Flippy498 said:
Please read the ReadMe thread. It will answer your question.
Click to expand...
Click to collapse
Well, I did.
you need to use a 3.x RUU for the same SKU and install the 4.x OTA, afterwards.
But it doesn't work.
I'm trying to upgrade to Nougat, but I get red triangle after 25% and I can't find an solution to this problem.
So you still get the triangle after you flashed the correct 3.x RUU? Or is the triangle the reason because of which you want to flash a RUU?
In your last post you asked which RUU to use and that is explained in the RUU section.
Sent from my HTC One M9 using XDA Labs
Flippy498 said:
So you still get the triangle after you flashed the correct 3.x RUU? Or is the triangle the reason because of which you want to flash a RUU?
In your last post you asked which RUU to use and that is explained in the RUU section.
Sent from my HTC One M9 using XDA Labs
Click to expand...
Click to collapse
Triangle is the reason why I want to RUU.
I went 'back to stock' with TWRP backup to update to nougat, but I get stuck at 25%. I'd like to try RUU to see if it makes any difference, but the few I tried won't start to install.
I see a lot of people have problems with updating to nougat and getting stuck at 25%, but seems no one was able to fix this problem. Failing nand? Phone works 100% OK otherwise.
Well, in that case you only need to follow the advices in the ReadMe thread. A RUU should fix the red triangle for the present. However, it won't guarantee that you won't face any nand issues in the future.
Sent from my HTC One M9 using XDA Labs
I managed to RUU and after OTA update to nougat by flashing the RUU rom.zip (renamed to 0PJAIMG.zip from micro-SD) from this post:
https://forum.xda-developers.com/one-m9/help/htc-one-m9-3-35-401-12-ruu-installer-t3318517
anyone know where i can get the RUU for HTC10 unlocked international but nougat?.... as my firmware is nougat, i need to install the nougat RUU, so i can get the OTA to orea so i can then go to leodroid oreo .... or am i misunderstanding .... all i can find for HTC10 is oreo, can't find RUU's for nougat....
https://www.htc.com/us/support/updates.aspx
OR am i doing this all wrong .... i'm on leodroid nougat and iw ant to go to leodroid oreo, i'm S-ON but bootloader unlocked. Other websites that say they have hte direct link to the 7.0 RUU all give a 404 when trying to download the .exe
aerospyke said:
anyone know where i can get the RUU for HTC10 unlocked international but nougat?.... as my firmware is nougat, i need to install the nougat RUU, so i can get the OTA to orea so i can then go to leodroid oreo .... or am i misunderstanding .... all i can find for HTC10 is oreo, can't find RUU's for nougat....
https://www.htc.com/us/support/updates.aspx
OR am i doing this all wrong .... i'm on leodroid nougat and iw ant to go to leodroid oreo, i'm S-ON but bootloader unlocked. Other websites that say they have hte direct link to the 7.0 RUU all give a 404 when trying to download the .exe
Click to expand...
Click to collapse
Oreo RUU for US Unlocked
https://androidfilehost.com/?fid=962157660013070850
No need to flash Nougat just flash the Oreo ruu.
yldlj said:
Oreo RUU for US Unlocked
https://androidfilehost.com/?fid=962157660013070850
No need to flash Nougat just flash the Oreo ruu.
Click to expand...
Click to collapse
Probably getting errors because you need to flash the firmware first. Better to flash the nougat ruu and take the ota.
And he types international unlocked, so that is confusing. It's either US unlocked or international.
---------- Post added at 05:17 AM ---------- Previous post was at 05:14 AM ----------
aerospyke said:
anyone know where i can get the RUU for HTC10 unlocked international but nougat?.... as my firmware is nougat, i need to install the nougat RUU, so i can get the OTA to orea so i can then go to leodroid oreo .... or am i misunderstanding .... all i can find for HTC10 is oreo, can't find RUU's for nougat....
https://www.htc.com/us/support/updates.aspx
OR am i doing this all wrong .... i'm on leodroid nougat and iw ant to go to leodroid oreo, i'm S-ON but bootloader unlocked. Other websites that say they have hte direct link to the 7.0 RUU all give a 404 when trying to download the .exe
Click to expand...
Click to collapse
Please open a Q&A for proper help. This all doesn't belong here. We can help you there. And a tip, use the zip versions here. Exe files will give you a massive headache
Mr Hofs said:
Probably getting errors because you need to flash the firmware first. Better to flash the nougat ruu and take the ota.
And he types international unlocked, so that is confusing. It's either US unlocked or international.
---------- Post added at 05:17 AM ---------- Previous post was at 05:14 AM ----------
Please open a Q&A for proper help. This all doesn't belong here. We can help you there. And a tip, use the zip versions here. Exe files will give you a massive headache
Click to expand...
Click to collapse
Thanks everyone... yes the oreo RUU isn't working, it's complaining. and yes sorry ... i'm international (australia), CID 621 though which loks like it says taiwan? *sigh* i only asked here coz i'm trying to upgrade my leedroid 7 to leedroid 8
aerospyke said:
Thanks everyone... yes the oreo RUU isn't working, it's complaining. and yes sorry ... i'm international (australia), CID 621 though which loks like it says taiwan? *sigh* i only asked here coz i'm trying to upgrade my leedroid 7 to leedroid 8
Click to expand...
Click to collapse
Your not on international or Australian. Your on TW you need x.xx.709 RUU
https://androidfilehost.com/?fid=745849072291681183
Please post your OS from download mode before flashing anything.
Provide us the info from the download mode. OS line and such. Much easier to get the proper ruu
@aerospyke
For future threads, Remember to post them in the correct forums, I've moved a few posts and formed a new thread for you to continue discussion for this in the proper area.
Thankyou Critical Detox, i went to create the new thread as everyone asked me and saw it i Q&A and got real confused! ....
As for what is being asked of, the OS is 2.41.709.7 .... that sounds like YLDLJ said.... any other lines you need specifically? (so i know what it all means eheh) i have
*** UNLOCKED ***
htc_pmeuhl PVT S-ON
LK-1.0.0.0000
[email protected]
OpenDSP-V20.0.8996.00007.0809
OS-2.41.709.7
So that link from yldlj is the correct one for me?
aerospyke said:
Thankyou Critical Detox, i went to create the new thread as everyone asked me and saw it i Q&A and got real confused! ....
As for what is being asked of, the OS is 2.41.709.7 .... that sounds like YLDLJ said.... any other lines you need specifically? (so i know what it all means eheh) i have
*** UNLOCKED ***
htc_pmeuhl PVT S-ON
LK-1.0.0.0000
[email protected]
OpenDSP-V20.0.8996.00007.0809
OS-2.41.709.7
So that link from yldlj is the correct one for me?
Click to expand...
Click to collapse
Yes because as you can see the file has the same version number as your firmware. It will put the device to stock, boot it and take the ota to Oreo
Mr Hofs said:
Yes because as you can see the file has the same version number as your firmware. It will put the device to stock, boot it and take the ota to Oreo
Click to expand...
Click to collapse
thanks eveyrone, i'm now on oreo and flashing custom. something i noticed though on my bootloader after OTA to oreo is it now says fused... i.e.
*** UNLOCKED ***
*** FUSED ***
What does that mean? Sounds ominous
aerospyke said:
thanks eveyrone, i'm now on oreo and flashing custom. something i noticed though on my bootloader after OTA to oreo is it now says fused... i.e.
*** UNLOCKED ***
*** FUSED ***
What does that mean? Sounds ominous
Click to expand...
Click to collapse
Normal. It's something the Oreo firmware does to the bootloader. No worries. Have fun with leedroid oreo
Hmm... It's been so long since I've done anything with phones, I'm running stock rooted nougat. Bootloader unlocked but still s-on
Is it safe to just run the Oreo OTA and then re root my device or do i need to remove root or anything first?
If any other info is needed let me know, thanks!
demkantor said:
Hmm... It's been so long since I've done anything with phones, I'm running stock rooted nougat. Bootloader unlocked but still s-on
Is it safe to just run the Oreo OTA and then re root my device or do i need to remove root or anything first?
If any other info is needed let me know, thanks!
Click to expand...
Click to collapse
You can just run ota. It might unroot but that's all.
kazuki1 said:
You can just run ota. It might unroot but that's all.
Click to expand...
Click to collapse
Thanks! Appreciate that, been way too long for me to just give in?
Update won't work with root, also not with removed root. It leaves traces. Either go back to stock with the nougat ruu and take the ota or revert to a PURE stock NON rooted backup and take the ota. Or flash the Oreo firmware and then the Oreo ruu .......
yldlj said:
Oreo RUU for US Unlocked
https://androidfilehost.com/?fid=962157660013070850
No need to flash Nougat just flash the Oreo ruu.
Click to expand...
Click to collapse
Do you Flashboot this or TWRP?
magistrateee said:
Do you Flashboot this or TWRP?
Click to expand...
Click to collapse
Download mode after renaming the zip
Where can I get international RUU??? Can't seem to find it anywhere. Heres my info for clarification.
PS C:\adb> fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_pmewl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno: FA75PBN00312
(bootloader) current-slot:
(bootloader) imei: 354259071010296
(bootloader) version-main: 2.41.592.51
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS650000
(bootloader) cid: HTC__332
Donnie267 said:
Where can I get international RUU??? Can't seem to find it anywhere. Heres my info for clarification.
PS C:\adb> fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_pmewl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno: FA75PBN00312
(bootloader) current-slot:
(bootloader) imei: 354259071010296
(bootloader) version-main: 2.41.592.51
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS650000
(bootloader) cid: HTC__332
Click to expand...
Click to collapse
As i have answered you here. Your version main is NOT the international one. The international one is 2.41.401 (for nougat)
https://forum.xda-developers.com/htc-10/help/problems-to-stock-t3744765/page2