Hello Everyone, i´ve just installed Android revolution on my HTC M9 with TWRP. S-on, unlocked bootloader, OS-2.10.161.7. It says its installed find and all that but when i reboot it normally it send me straitgt to the screen where i can choose between: REBOOT
Reboot to Bootloader
Boot to Download Mode
Boot to Recovery
Power Down
I just cant seem to find my mistake and i cant use the phone and i need it since this is my only Phone i have.
ARHD 6.0 requires a 3.xx firmware...
Also....what version of TWRP did you use...
(needs to be the latest beta from captain's twrp thread)
Lastly....did you allow TWRP to install superuser prior to boot ?? (Will bootloop)...
Check those items....g
gregsarg said:
ARHD 6.0 requires a 3.xx firmware...
Also....what version of TWRP did you use...
(needs to be the latest beta from captain's twrp thread)
Lastly....did you allow TWRP to install superuser prior to boot ?? (Will bootloop)...
Check those items....g
Click to expand...
Click to collapse
I´m using ARHD 20.0 and my TWRP is 2.8.5.0 and Yes after installing ARHD 20.0 it asked me if i want to Root the Device and I accepted it.
C:\adb>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: 123456789
(bootloader) version-main: 2.10.161.7
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440601_86.09.50723G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: VODAP102
all:
finished. total time: 0.016s
Maybe this could hel a little
You need to update your firmware to 3.xx.
Your recovery is not the correct version....and you flashed an incompatible version of SU....
Flash the appropriate firmware...
Then reflash the rom...
Then flash the correct SU via the new recovery...
Do not allow TWRP to install SU...
That is flashed by you...
Read and re-read the threads pertaining to ARHD...and recovery...
It's all there....
And now we know why the device doesn't run...g
gregsarg said:
You need to update your firmware to 3.xx.
Your recovery is not the correct version....and you flashed an incompatible version of SU....
Flash the appropriate firmware...
Then reflash the rom...
Then flash the correct SU via the new recovery...
Do not allow TWRP to install SU...
That is flashed by you...
Read and re-read the threads pertaining to ARHD...and recovery...
It's all there....
And now we know why the device doesn't run...g
Click to expand...
Click to collapse
thanks for the help, ive just had a look but the latest firmware update is 1.40.161.8 -> 2.10.161.7 and thats it, i think ill just have to wait till it´s been released, ive installed the 5.1 with arhd 14.0 so ill just wait and till they released it.
gregsarg said:
You need to update your firmware to 3.xx.
Your recovery is not the correct version....and you flashed an incompatible version of SU....
Flash the appropriate firmware...
Then reflash the rom...
Then flash the correct SU via the new recovery...
Do not allow TWRP to install SU...
That is flashed by you...
Read and re-read the threads pertaining to ARHD...and recovery...
It's all there....
And now we know why the device doesn't run...g
Click to expand...
Click to collapse
can you post the links in here i need, i cant find them somehow and i wanna make sure that i´m using the right ones
ARHD 6.0 requires a 3.xx firmware...
i am in the same position as you mate you cannot install ARHD 6.0 as it requires a 3.xx firmware... you have to make sure the rom you want to install has the correct or corresponding firmware on your device first so if you want to install that rom you will need to update your firmware to 3.xx and as you are s-on you can only install the official over the air (ota) update which will update your firmware aswell so to do this you will need to install the stock 2.10.xxx.xx rom i would use the 2.10.401.1 software that will take you back to stock you then need to relock your bootloader and then update your device with the official ota updater from vodaphone which i am still waiting for is due very soon once you have done that you can re unlock your bootlaoder install twrp again and now as you will have 3.xx.xxx.x or 3.05.xxx.x (not sure of the software no as it has not been released in the uk yet for vodaphone devices it may have been released for other countries or the us im not sure) you could however also s-off your device using sunshine update your firmware to 3.xx.xxx.x and then update your rom pm me if you are still stuck as we both have the same phone and problem and version firmware and software
stretch1974 said:
i am in the same position as you mate you cannot install ARHD 6.0 as it requires a 3.xx firmware... you have to make sure the rom you want to install has the correct or corresponding firmware on your device first so if you want to install that rom you will need to update your firmware to 3.xx and as you are s-on you can only install the official over the air (ota) update which will update your firmware aswell so to do this you will need to install the stock 2.10.xxx.xx rom i would use the 2.10.401.1 software that will take you back to stock you then need to relock your bootloader and then update your device with the official ota updater from vodaphone which i am still waiting for is due very soon once you have done that you can re unlock your bootlaoder install twrp again and now as you will have 3.xx.xxx.x or 3.05.xxx.x (not sure of the software no as it has not been released in the uk yet for vodaphone devices it may have been released for other countries or the us im not sure) you could however also s-off your device using sunshine update your firmware to 3.xx.xxx.x and then update your rom pm me if you are still stuck as we both have the same phone and problem and version firmware and software
Click to expand...
Click to collapse
Hey, I´ve just decided to stay like that on ARHD 14.0 untill there is a firmware update for my 2.10.161.7 because I dont want to destroy my system and I changed my status to S-off now.
You can do the firmware update now you are s-off let me know if you wa t to know where to get it and how to do it I am doing the same I am already preparing for it just waiting to pay for s-off and I will be doing it
Gents...
No need to relock your bootloaders for OTA..
ALL YOU NEED...is a stock system image and recovery...g
Edit:
The reason for leaving the bootloader unlocked is simple...
If any part of system is not correct when you relock....you will be unable to unlock again later...g
can anyone give me a little guide how to update the firmware with s-off
gray21312 said:
can anyone give me a little guide how to update the firmware with s-off
Click to expand...
Click to collapse
Read the information below very carefully....then read it again....
Not trying to sound rude or condescending.....but firmware flashing can be a brick level event if the wrong software is used etc....
A lot of information here....and I've never found a better written thread...
Read read read.....and happy flashing....(go to first page of thread)...
Standard disclaimers apply...and you do this at your own risk....g
http://forum.xda-developers.com/showthread.php?t=3068243
gregsarg said:
Read the information below very carefully....then read it again....
Not trying to sound rude or condescending.....but firmware flashing can be a brick level event if the wrong software is used etc....
A lot of information here....and I've never found a better written thread...
Read read read.....and happy flashing....(go to first page of thread)...
Standard disclaimers apply...and you do this at your own risk....g
http://forum.xda-developers.com/showthread.php?t=3068243
Click to expand...
Click to collapse
Okay litte update, I´m busy downloading the 2.10.161.7 Stock recovery. I´ve changed my Cid Mid to stock, reflashed the stock recovery and locked my bootloader. I hope it´ll work out. I´ll keep you up to date
Related
Hello.
I need some help with the update process on the HTC ONE X.
Here is my phone info:
Code:
Android version : 4.1.1
S-ON
version-bootloader: 1.36.0000
version-baseband: 5.1204.162.29
version-main: 3.14.708.28
platform: HBOOT-T30S
cidnum: HTC__622
I have CWM Custom recovery and the bootloader is unlocked.
I am trying to update the software to the latest one available.
Here is what I tried:
1)Performing a regular OTA update. It won't update.
2)Getting the OTA zip and flashing it trough CWM. After this I am stuck in a bootloop.
3)Using<RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Radio_5.1204.162.29_release_299865_signed> . I get Error 132 signature error.
4)Running <<RUU_ENDEAVOR_U_ICS_40_hTC_Asia_HK_1.29.708.15_Radio_2.1204.122.17_release_268338_signed>. Gives an error regarding the bootloader version.
4) Extracting the zip from <RUU_ENDEAVOR_U_ICS_40_hTC_Asia_HK_1.29.708.15_Radio_2.1204.122.17_release_268338_signed>, flashing recovery, boot, and system img, relocking the bootloader and runing the <RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Radio_5.1204.162.29_release_299865_signed> . Again signature error.
Right now I restored a nandroid backup.
Could you please point me in the right direction? I'm not really a beginner in flashing but coming from Samsung, flashing One X is very time consuming and honestly I lost my patience.
I think I got the right firmware (considering cid) but I may need to flash something from the stock rom before I can update.
I just want to update to the latest stock rom and if possible to a custom one. So, can you guy provide some info and maybe some links about what versions could I flash considering the information about the phone posted in the opening?
Thank you.
diordna2 said:
Hello.
I need some help with the update process on the HTC ONE X.
Here is my phone info:
Code:
Android version : 4.1.1
S-ON
version-bootloader: 1.36.0000
version-baseband: 5.1204.162.29
version-main: 3.14.708.28
platform: HBOOT-T30S
cidnum: HTC__622
I have CWM Custom recovery and the bootloader is unlocked.
I am trying to update the software to the latest one available.
Here is what I tried:
1)Performing a regular OTA update. It won't update.
2)Getting the OTA zip and flashing it trough CWM. After this I am stuck in a bootloop.
3)Using<RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Radio_5.1204.162.29_release_299865_signed> . I get Error 132 signature error.
4)Running <<RUU_ENDEAVOR_U_ICS_40_hTC_Asia_HK_1.29.708.15_Radio_2.1204.122.17_release_268338_signed>. Gives an error regarding the bootloader version.
4) Extracting the zip from <RUU_ENDEAVOR_U_ICS_40_hTC_Asia_HK_1.29.708.15_Radio_2.1204.122.17_release_268338_signed>, flashing recovery, boot, and system img, relocking the bootloader and runing the <RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Radio_5.1204.162.29_release_299865_signed> . Again signature error.
Right now I restored a nandroid backup.
Could you please point me in the right direction? I'm not really a beginner in flashing but coming from Samsung, flashing One X is very time consuming and honestly I lost my patience.
I think I got the right firmware (considering cid) but I may need to flash something from the stock rom before I can update.
I just want to update to the latest stock rom and if possible to a custom one. So, can you guy provide some info and maybe some links about what versions could I flash considering the information about the phone posted in the opening?
Thank you.
Click to expand...
Click to collapse
relock the bootloader first then run the RUU.
robchongke said:
relock the bootloader first then run the RUU.
Click to expand...
Click to collapse
I tried that already.
All you had to do was flash the stock recovery.
To get ota you must have stock Rom, stock boot.img and stock recovery. You do not have to lock the bootloader for ota but you do before you run an ruu, which is probably why you got a signature error on the first one. And lastly, you cannot run an ruu which is lower than your main version
Sent from my HTC One X using XDA Premium 4 mobile app
nogotaclue said:
All you had to do was flash the stock recovery.
To get ota you must have stock Rom, stock boot.img and stock recovery. You do not have to lock the bootloader for ota but you do before you run an ruu, which is probably why you got a signature error on the first one. And lastly, you cannot run an ruu which is lower than your main version
Sent from my HTC One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you for the info. Is the recovery from the clockwork nandroid backup the right one or could you please point me to a link with the right stock recovery?
And one more thing: is Android Revolution HD compatible with my phone?
diordna2 said:
Thank you for the info. Is the recovery from the clockwork nandroid backup the right one or could you please point me to a link with the right stock recovery?
And one more thing: is Android Revolution HD compatible with my phone?
Click to expand...
Click to collapse
No, the recovery in the nandroid is a custom recovery. You can get the stock recovery from the general section from the "collection of stock nandroids" thread. Or you can Google "3.14 stock recovery" and look for clydeb1's dev host account, he has a load of recoveries listed. And yes, arhd is compatible with your phone, as is any other rom in the one x thread.
Sent from my HTC One X using XDA Premium 4 mobile app
My M8 has the CID of HTC_044 and I would like to flash latest ROM. However it requires latest firmware, ie 2.22.401.4, I am wondering if it is safe to flash the firmware to my device being with different CID as the firmware's android-info does not contain my device CID.
I have S-OFF on my device, I am wondering if I change mt CID to supercid would allow my device to run the firmware without issue.
Thanks in advance.
Yep,if your phone is supercid,u can flash that firmware...
hellcommando said:
My M8 has the CID of HTC_044 and I would like to flash latest ROM. However it requires latest firmware, ie 2.22.401.4, I am wondering if it is safe to flash the firmware to my device being with different CID as the firmware's android-info does not contain my device CID.
I have S-OFF on my device, I am wondering if I change mt CID to supercid would allow my device to run the firmware without issue.
Thanks in advance.
Click to expand...
Click to collapse
If your firmware for CID HTC__044 is 2.22.707.3, it is not necessary for you to flash another firmware to run a 2.22.401.4 ROM.
As long as the firmware is 2.22.xxx.x ... you're good to go.
Anyway it's up to you if you want to flash 2.22.401.4 firmware but your Radio will be the EU region if the firmware that you flash come with radio image. If you currently in Asia, it's best to keep 2.22.707.3 firmware
hdorius said:
Yep,if your phone is supercid,u can flash that firmware...
Click to expand...
Click to collapse
Thank you!
ckpv5 said:
If your firmware for CID HTC__044 is 2.22.707.3, it is not necessary for you to flash another firmware to run a 2.22.401.4 ROM.
As long as the firmware is 2.22.xxx.x ... you're good to go.
Anyway it's up to you if you want to flash 2.22.401.4 firmware but your Radio will be the EU region if the firmware that you flash come with radio image. If you currently in Asia, it's best to keep 2.22.707.3 firmware
Click to expand...
Click to collapse
Thank you! However I have heard there was one 2.22.7xx posted but was meant for M7, and at the moment I could not find 2.22.707.3 firmware from any firmware repository. I'm from Asia, could you please kindly post the link so that I wont brick my phone? Thank you!!
hellcommando said:
Thank you! However I have heard there was one 2.22.7xx posted but was meant for M7, and at the moment I could not find 2.22.707.3 firmware from any firmware repository. I'm from Asia, could you please kindly post the link so that I wont brick my phone? Thank you!!
Click to expand...
Click to collapse
When we read firmware we look at x.xx.707.x not 2.22.7xx.x
You don't need 2.22.707.3 firmware if you already done the OTA update.
Please advise your current firmware that you have ... check what is written on the bootloader ... is it 1.54.707.7 or 2.22.707.3 ?
If it is 1.54.707.7 then you need to do OTA update.
If it is 2.22.707.3 then you're good to flash any ROM.
ckpv5 said:
When we read firmware we look at x.xx.707.x not 2.22.7xx.x
You don't need 2.22.707.3 firmware if you already done the OTA update.
Please advise your current firmware that you have ... check what is written on the bootloader ... is it 1.54.707.7 or 2.22.77.3 ?
If it is 1.54.707.7 then you need to do OTA update.
If it is 2.22.707.3 then you're good to flash any ROM.
Click to expand...
Click to collapse
Couldn't check my firmware version as the OS field is empty in the bootloader.
Hboot: 3.16.0.0000
Radio: 1.16.2133156.UA10G
But I highly doubt my firmware is 2.22.707.3, I would think it is more likely to be 1.54.707.7 as I have rooted by phone before newer firmware roll out.
So can I use your firmware in http://forum.xda-developers.com/showthread.php?t=2701376&page=141
and flash it by using this guide? http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
hellcommando said:
Couldn't check my firmware version as the OS field is empty in the bootloader.
Hboot: 3.16.0.0000
Radio: 1.16.2133156.UA10G
But I highly doubt my firmware is 2.22.707.3, I would think it is more likely to be 1.54.707.7 as I have rooted by phone before newer firmware roll out.
So can I use your firmware in http://forum.xda-developers.com/showthread.php?t=2701376&page=141
and flash it by using this guide? http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
Click to expand...
Click to collapse
Right ... your current hboot is 3.16 so it's 1.54.707.7
I suggest that you restore 1.54.707.7 stock Backup, flash back stock recovery and do the OTA (no need to relock bootloader or S-On .. OTA update work on unlocked bootloader and S-Off)
I don't post firmware on XDA. Those that I posted are recovery and stock backup.
If you insist to update firmware without OTA update .. that's you call. Someone maybe will guide you how to do it as I don't feel comfortable telling how to update firmware.
ckpv5 said:
Right ... your current hboot is 3.16 so it's 1.54.707.7
I suggest that you restore 1.54.707.7 stock Backup, flash back stock recovery and do the OTA (no need to relock bootloader or S-On .. OTA update work on unlocked bootloader and S-Off)
I don't post firmware on XDA. Those that I posted are recovery and stock backup.
If you insist to update firmware without OTA update .. that's you call. Someone maybe will guide you how to do it as I don't feel comfortable telling how to update firmware.
Click to expand...
Click to collapse
Awesome! I just followed your advice by doing the safe way, flashed stock recovery and backup. I'm running on 2.22.707.x now! Thanks a lot :good:
hellcommando said:
Awesome! I just followed your advice by doing the safe way, flashed stock recovery and backup. I'm running on 2.22.707.x now! Thanks a lot :good:
Click to expand...
Click to collapse
Great
Now you can flash any Sense 6 custom ROM that you like.
Only remember that you don't need to flash another firmware, your current one is good enough.. just flash ROM.
I am having the same issue - I have the HTC__044 and need new firmware to get the newest ROM.
I am S-On and CANT get S-off (s-off needed to flash firmware)...firewater does not work with my phone after multiple tries.
I tried getting Sunshine to work for s-off, but I need to be on a stock Sense ROM (I am on Viper 1.8) and don't have a stock backup. I can't find ANY stock ROM's online! Once I have supercid i was going to flash firmware, but without S off...I'm going nowhere (it seems)
anyone have an idea where I should start?
charkswitlazers said:
I am having the same issue - I have the HTC__044 and need new firmware to get the newest ROM.
I am S-On and CANT get S-off (s-off needed to flash firmware)...firewater does not work with my phone after multiple tries.
I tried getting Sunshine to work for s-off, but I need to be on a stock Sense ROM (I am on Viper 1.8) and don't have a stock backup. I can't find ANY stock ROM's online! Once I have supercid i was going to flash firmware, but without S off...I'm going nowhere (it seems)
anyone have an idea where I should start?
Click to expand...
Click to collapse
Stock ROMs and recoveries for HTC__044
http://forum.xda-developers.com/showthread.php?t=2701376
charkswitlazers said:
anyone have an idea where I should start?
Click to expand...
Click to collapse
Everything that you need is here : http://forum.xda-developers.com/showthread.php?t=2701376
1. Restore nandroid backup 1.54.707.7
2. flash stock recovery 1.54.707.7
3. reboot and check for OTA
4. install OTA
5. done .. your ROM will be 4.4.3 - 2.22.707.3
6. flash any 4.4.3 custom ROM that you like if any
All above no need to relock bootloader or S-Off, it works on S-On
If you want to S-Off with sunshine, step 1 & 2 then sunshine
or after step 5 then sunshine (both way should work)
ckpv5 said:
Everything that you need is here
1. Restore nandroid backup 1.54.707.7
2. flash stock recovery 1.54.707.7
3. reboot and check for OTA
4. install OTA
5. done .. your ROM will be 4.4.3 - 2.22.707.3
6. flash any 4.4.3 custom ROM that you like if any
All above no need to relock bootloader or S-Off, it works on S-On
If you want to S-Off with sunshine, step 1 & 2 then sunshine
or after step 5 then sunshine (both way should work)
Click to expand...
Click to collapse
I'm still a little on the noob side with rooting/flashing..I am at work and don't have time to read much - i will go home and give it a go... I'm sure I will have lots of questions
A quick look at the site, i saw lots of recoveries but not very many stock ROMs. I mainly just need a plain/rooted stock Sense rom to run Sunshine. After which i can flash new firmware, then the new custom ROM i've been wanting. Also, does a nandroid HAVE to be HTC__044, or can it be any WWE cid? (like anything that's "HTC__xxx")?
Excuse my ignorance...trying to learn as much as possible
I just got my m8 from Tmobile today, and I am on firmware 157.531.7
I've checked several times for updated firmware, but always comes back nothing.
Am I stuck on this, or will it take awhile for the network to "see me" and send it?
not rooted, fully stock for now
thanks so much!
charkswitlazers said:
I'm still a little on the noob side with rooting/flashing..I am at work and don't have time to read much - i will go home and give it a go... I'm sure I will have lots of questions
A quick look at the site, i saw lots of recoveries but not very many stock ROMs. I mainly just need a plain/rooted stock Sense rom to run Sunshine. After which i can flash new firmware, then the new custom ROM i've been wanting. Also, does a nandroid HAVE to be HTC__044, or can it be any WWE cid? (like anything that's "HTC__xxx")?
Excuse my ignorance...trying to learn as much as possible
Click to expand...
Click to collapse
If your main purpose to restore to stock to get SunShine working, then any nandroid backup will do either HTC__044 or WWE. You don't really need a rooted stock as SunShine works on non-rooted ROM too.
As you said you're a noob, that is why I suggest to restore to 1.54.707.7 then OTA to 2.22.707.3 so you don't need to manually flash firmware to get other custom ROMs running flawlessly. It is not necessary to have 2.22.401.4 firmware but it is necessary to have a 2.22.xxx.x firmware for those custom ROMs, unless you're not in Asia.
As you can see in my sig, I'm on 2.22.707.3 firmware, I can run any ROM without problem.
Being a noob, you may make a stupid mistake when flashing firmware.
There is also by mike or so a stock Rom as a zip.
Flash it like a custom Rom Flash the stock kernel and better the recovery and do sunshine...easier then with getting nandroid backup etc
Slow Booting & Sense 6 Toolbox Not Working On ARHD v10.2
One-M8-Master said:
There is also by mike or so a stock Rom as a zip.
Flash it like a custom Rom Flash the stock kernel and better the recovery and do sunshine...easier then with getting nandroid backup etc
Click to expand...
Click to collapse
Hi One-M8-Master,
I've read quite a few of your posts & given that your moniker seems appropriate, I'm wondering if you might be able to help me?
I've posted this on another thread but haven't got very far as yet, so am hoping that you might be able to get me out of the stupid hole I've dug myself into :fingers-crossed:
It is quite a long description but if you don't fall asleep reading it, I'd really appreciate any help you might be able to give me.....Here goes:
"Hi Guys,
Now I know you're all already thinking that I didn't update my firmware before I flashed ARHD & now I'm getting all the problems that come along with not doing that......& you'd be correct....kind of. HOWEVER, as it turns out, I already seem to have it. Let me explain.
As you can see, I'm relatively new to all this but successfully unlocked, rooted & installed a custom ROM on my ASUS TF700T tablet, so I wanted to do it with my One M8. I always do loads of reading before I start anything (I even read the instructions for new games before I attempt to play them because I'm a bit weird like that!) but what happened on this occasion was that I did the reading, unlocked the phone, flashed TWRP, & rooted it but then ran into the problem that some people appear to have had when trying to s-off via the adb commands & Firewater, that is, my pc could see the phone but when I gave the reboot command, it told me it wasn't connected.
I then got into hours of reading to try & solve this issue, discovered that (without Sunlight) on some devices it just doesn't work once you've accepted the 'should we allow this pc to connect every time' message (which I NEVER normally say 'yes' to), unless you install the Android Studio & Java Develpers Kits, update your version of adb, & force the phone to ask again (which I did but it turned out that I already had the latest version of adb, so that route proved fruitless!). I actually missed a night's sleep trying to resolve the problem, so work wasn't good the next day! but I think it is here is where my problems started because I was so tired & frustrated that I just picked a ROM & flashed it. I had even read the warning about not flashing it if you didn't have the correct firmware but I think that being so tired, it didn't really sink in, or I'd forgotten about it by the time I just flashed the ROM.
By this point, I'd been sat in front of my pc for about 30 hours & needed to go to work but the phone was actually booting through to ARHD, so I was relatively happy in the knowledge that at least I hadn't bricked it! On starting to use the phone that evening, I noticed the long boot times & then that my Sense 6 Toolbox didn't seem to be making any changes, even if I rebooted the device, so I went back to the beginning of this thread & started reading again. Thus, I re-read the firmware warning & panicked (my 2nd mistake!), thinking that I was getting the problems because I hadn't updated the firmware (it still didn't occur to me to just check because I think I just assumed that I wouldn't have it). So.....I tried to restore my TWRP backup of the stock ROM that I made after I had unlocked/rooted, with the intention of reverting to the stock ROM, getting the OTA update & then re-flashing ARHD but despite TWRP telling me that the backup had been successful, the phone went into a bootloop back into TWRP. I solved this by re-flashing the ARHD ROM that I knew at least would get my phone out of the bootloop & back into KitKat, which it did. I then checked what version of the firmware I had & to my surprise, my Build Number in About\Software Information\More says "2.22.401.4 CL365360 release-keys", so it looks like I had the correct firmware version all along?
The above being the case, I'm now puzzled as to why I'm getting the problems that I'm getting with ARHD? Does anyone have any clues/answers that might get me out of this hole I've dug for myself & get my awesome One M8 working like it should?
I know I've caused this problem by doing things when I was too tired to think straight but I'm fresh as a daisy now (still fairly noobish but fresh ) & now I need your help to sort myself out. I would be so grateful for any help anyone can give me to get me back on track.
I hope all of that makes sense & thanks in advance."
@dan5001
The firmware you speak of is the displayed version main number of the flashed rom. It has no relation to your actual installed firmware. Check your bootloader and post here what it says. I bet it is still hboot 3.16 and if that's the case your firmware is not updated.
Mr Hofs said:
@dan5001
The firmware you speak of is the displayed version main number of the flashed rom. It has no relation to your actual installed firmware. Check your bootloader and post here what it says. I bet it is still hboot 3.16 and if that's the case your firmware is not updated.
Click to expand...
Click to collapse
Hi.
This is my own fault but I'm getting really frustrated with it because I've probably spent a total of 40 hours on it so far
I tell you that because I know that I needed S-OFF & SUPER CID to be able to update my firmware, so I just thought "screw it" & I paid for Sunshine. I now have S-OFF & following Vomer's guide here:
http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
I now have S-OFF & SUPER CID. I thought that would be the end of my issues but it would appear not!
Looking at my bootloader, you are correct, HBOOT is 3.16.0.0000!
However, I've tried to upgrade this firmware by downloading what I think is the correct update .zip from the list at the bottom of the aforementioned Vomer's guide (v2.22.401.5 (Rename to firmware.zip after downloading)), renaming it as suggested, & then flashing it in TWRP but it just keeps telling me that the update has failed!
Do I have to do it using the adb commands on Vomers guide? I didn't think so but it's just not working??
I appreciate any help you can give me with this. Given that I've spent so long on this & have paid for Sunshine, you can see that I'm trying to help myself but I've still got rain!!
EDIT
Just a thought, I do still have ARHD v10.2 installed at the moment because even though it's not working properly without the correct firmware, it's the only ROM I've got at the moment, so it means I can use the M8 to a degree; would that cause the problem with upgrading the firmware?
Firmware flash can be done via fastboot commands, that's how i did it
Installed rom has no influence on the to flash firmware, try it via fastboot
hi all
my friend tried to update his phone, and all he's got is:
the phone can't boot into recovery. stuck on "entering recovery"
insert coin rom (v 3.0.8) works fine, except the play store!
i tried to flash a new recovery with no success. finally i flash a twrp by captain throwback version 2.8.0.6, and wow it works!
now, i'm wanna to update his M8 to least android version.
fastboot getvar all:
m8_ul
s-on
CID: HTC__K18
MID: 0P6B10000
HBOOT: 3.16.0.0000
version main: empty
settings >> about >> software information:
android version 4.4.2
sense 6.0
InsertCoin version 3.0.8
build number 1.54.401.10
can i simply flash 4.16.401.10 firmware.zip, least TWRP version, ARHD 34.0 (don't worry i don't forget the boot.img )
or
it's better to return to stock and perform software updates?
by the way,
the build number in settings, is the current firmware.zip that installed? or the firmware that the rom based on??
thank's
i read somewhere that its safer to flash firmwares in row, start at 1.54.401.10 then the others in the x.xx.401.xx line
you can also try simply to flash the latest RUU. maybe you get some wifi errors.
i was on 3.xx.401 firmware and installed the 4.x DEV RUU without any errors
yeah the build number in settings shows the rom base.
ok, thanks
erislav said:
yeah the build number in settings shows the rom base.
Click to expand...
Click to collapse
so, i cannot know the exact firmware he has..
i'm asked that because the safest way to update is going back to stock. i found only 1.54.401.5 NAND Backups.
i'm afraid to flash the wrong nand backup..
how can i know which firmware he has?
http://forum.xda-developers.com/showthread.php?t=2701376
If you want to go the save way Try the 1.54.401.x RUU.exe from the thread. Then you should be fine to apply the otas
Dont be to afraid from flashing wrong files in most cases your phone wont get bricked it just dont boot up
erislav said:
http://forum.xda-developers.com/showthread.php?t=2701376
If you want to go the save way Try the 1.54.401.x RUU.exe from the thread. Then you should be fine to apply the otas
Dont be to afraid from flashing wrong files in most cases your phone wont get bricked it just dont boot up
Click to expand...
Click to collapse
sorry about all of my questions but, i found there only 1.54.1540.10 RUU EXE
not 401 ..
TUR_G7 said:
hi all
my friend tried to update his phone, and all he's got is:
the phone can't boot into recovery. stuck on "entering recovery"
insert coin rom (v 3.0.8) works fine, except the play store!
i tried to flash a new recovery with no success. finally i flash a twrp by captain throwback version 2.8.0.6, and wow it works!
now, i'm wanna to update his M8 to least android version.
fastboot getvar all:
m8_ul
s-on
CID: HTC__K18
MID: 0P6B10000
HBOOT: 3.16.0.0000
version main: empty
settings >> about >> software information:
android version 4.4.2
sense 6.0
InsertCoin version 3.0.8
build number 1.54.401.10
can i simply flash 4.16.401.10 firmware.zip, least TWRP version, ARHD 34.0 (don't worry i don't forget the boot.img )
or
it's better to return to stock and perform software updates?
by the way,
the build number in settings, is the current firmware.zip that installed? or the firmware that the rom based on??
thank's
Click to expand...
Click to collapse
Version main is empty because of the older recovery. Try to flash TWRP 2.8.4.0 again.
You can't flash the firmware zip without being S-Off. Sunshine is the only way to do it now, and it costs $25 (totally worth it). Or you could return to stock and take the OTAs. (stock ROM and recovery plus unmodified system partition)
The build number in settings is in fact the ROM base, and not the current firmware version.
xunholyx said:
Version main is empty because of the older recovery. Try to flash TWRP 2.8.4.0 again.
You can't flash the firmware zip without being S-Off. Sunshine is the only way to do it now, and it costs $25 (totally worth it). Or you could return to stock and take the OTAs. (stock ROM and recovery plus unmodified system partition)
The build number in settings is in fact the ROM base, and not the current firmware version.
Click to expand...
Click to collapse
first thanks for your help!
i will try this tomorrow .
on my m8 I bought sunshine (totally worth it) agree
but before i have s-off i'm flashed new firmware.zip (you have to relock your bootloader)
s-off lets you to flash firmware.zip without Signature and without relock
look at this http://forum.xda-developers.com/showthread.php?t=2696282
TUR_G7 said:
first thanks for your help!
i will try this tomorrow .
on my m8 I bought sunshine (totally worth it) agree
but before i have s-off i'm flashed new firmware.zip (you have to relock your bootloader)
s-off lets you to flash firmware.zip without Signature and without relock
look at this http://forum.xda-developers.com/showthread.php?t=2696282
Click to expand...
Click to collapse
Another part of the problem is that HTC updates incrementally. You can't just leap frog from 4.4.2 to 5.0.1.
Once you get S-Off, you can flash a firmware zip from this thread. @Sneakyghost makes his firmware packages so that you don't have to flash each update one at a time. You can just jump to the newest.
But.....from the readout on the earlier post, it is WWE and there is an RUU for that. It is signed, so it should work. It will only get you to 4.4.4. (3.28.401.9 is the newest on this thread). You could try to flash the Lolly firmware after you have updated to this.
Hi Folks,
I wonder if anyone can point me in the right direction please. Here's the story:
I bought a T-mobile branded HTC One M9
Changed it to WWE and ran with a it for a while without issue
Changed to Dev edition and applied the Android7OTA.zip (4.14.617.6) then TWRP, currently running without issue.
I got a notification of another OTA (4.19.617.1) earlier this evening.
Flashed the stock recovery I extracted from the android 7 dev RUU
Downloaded the OTA on the phone and once the phone booted into the stock recovery, I'm told:
'this package is for "htc_himaulatt" devices; this is a "htc_himauhl". Installation aborted'
Fastboot getvar all currently shows:
(bootloader) kernel: lk
(bootloader) product: htc_himaulatt
(bootloader) version: 1.0
(bootloader) serialno: xxxx
(bootloader) current-slot:
(bootloader) imei: xxxx
(bootloader) version-main: 4.14.617.6
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440971_103.00.61018G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA11000
(bootloader) cid: BS_US001
I've read of using a cid of BS_US002, I've changed to that and retried applying the OTA, but it did the same (so I changed it back).
Assuming the Product reported by fastboot is what's being checked... fastboot's reporting it's already set to what the stock recovery seems to be saying it needs to be. It was happy flashing the first RUU, I'm not sure what might be different this time round.
I bet there's a small thing I might need to change, but I don't know what.
Does anyone else please?
Also.. I've not found much info at all about the OTA to 4.19.617.1. Is it new enough that me somehow getting it off the phone (will probably need brief instructions) could be useful to anyone?
TIA!
Currently having the same problem.
Will post here if i have any luck.
Thanks philicibine.
I've just tried it with supercid too (fastboot oem writecid 11111111), but it didn't do the trick.
Before the phone reboots into the stock recovery, it says ''we have determined that your phone may be running a modified version of its system software....'.
ok so my phone is currently accepting the update!
The problem for me was I had installed TWRP. In trying to restore the stock recovery i was restoring the one from the NoWipe firmware file i used to upgrade to Nougat.
To solve, I extracted the recovery.img from the OTA.zip and flashed that.
Almost finished updating!
here is the recovery.img if you want to try it >> https://drive.google.com/open?id=0BzkydKcZdx9YWW55UDlIOV95UDA
philicibine said:
ok so my phone is currently accepting the update!
The problem for me was I had installed TWRP. In trying to restore the stock recovery i was restoring the one from the NoWipe firmware file i used to upgrade to Nougat.
To solve, I extracted the recovery.img from the OTA.zip and flashed that.
Almost finished updating!
here is the recovery.img if you want to try it >> https://drive.google.com/open?id=0BzkydKcZdx9YWW55UDlIOV95UDA
Click to expand...
Click to collapse
It was the stock recovery from the first android7 devRUU that I've been trying this with. Which OTA did you get this one from?
I've flashed it and the newest OTAs downloading again as I type..
edit: the file you posted a link to (thanks!) and the recovery I was originaly using are definitely different... My phones just failed to apply the update again, but given a different reason 'system parition has unexpected contents'. Guess I've not left system untouched as I thought.
I've just tried extracting system from the original devAndroid7RUU.zip and now I'm getting errors about it not being able to decrypt the .zip.. so must have somehow taken the recovery from another RUU.zip earlier this evening (which wouldn't have been a devRUU, but a WWE-explaining why it reported my phone didnt match the dev edition details). I was doing it remotely form work, while working-must be more careful, I guess.
This means I cant extract system from the right RUU.zip though.
I think I could flash the RUU.zip again (wiping everything, grrr), then let it install the later OTA before doing anything that could amend system.
I'd realy like to not wipe it if posible though.
How did you get the recovery you posted out of the OTA.zip please?
It maybe the same recovery then as I got it from the Dev ota. Seemed to work for me. Maybe you could flash the nowipe firmware and then this if it doesn't work?
---------- Post added at 10:53 PM ---------- Previous post was at 10:40 PM ----------
mad_tunes said:
How did you get the recovery you posted out of the OTA.zip please?
Click to expand...
Click to collapse
I simply unzipped it. It was in the firmware.zip archive inside the OTA.zip
I'm pretty confident the two recovery's are different, my phone does different things with the OTA depanding on which of the recovery's I've flashed.
I used 'HTC_RUU_Decrypt_Tool_3.1.0-WINDOWS64' to extract the recovery from what I thought was the devRUU.zip. This wont open the devRUU.zip now though, so I must have had it extract the wrong RUU earlier.
I've just flashed the stock android7 firmware and the recovery you posted a link to and the OTAs re-downloading
Edit:
I'm still in the same situation, it's reporting system's modified
I think I might just RUU it again. I need my phone running and set up over the next few days though, so it'll have to wait until Christmas is out the way.
Many thanks for your help though.
Do you see many differences after you've applied it?
(And I managed to type ota instead of ruu in the op, I've amended)
Hey guys,
I'm having the exact same issue. The way I was working it around was flashing the update via RUU from laptop but now I'm tired kf doing that every time when there is an update. I will restore my factory recovery and will try it again. After I've done so, I'll get back to you about it.
Best Regards
I couldn't sleep last night, so went for it with the DevRUU.zip I originally used..
It flashed fine as before, then my phone downloaded and applied the OTA just fine.
I couldn't get SuperSU to install properly afterwards though, so restored a TWRP backup so I could use my phone today.
I've been getting the OTA notification repeatedly during the day today though. Seems you can only postpone it for up to 4 hours, rather than dismiss it or turn off checking entirely. It's annoying.
So, I might give it another go pretty soon!
I just RUUd again and then did the OTA.
SuperSU-v2.65 (that I was using pre-OTA) woudn't install, showing 'Patching secpol. Failed. Arborting'
SuperSU-v2.79 installed just fine.
Sorted.
Hey guys. Just went to stock recovery. Unzipped from ota.zip>installed it>recovery works>phone reboot into system>finds the new update>starts to install>rebokts to recovery>starts updating up to 24%25% and then gets me back to recovery saying there is some error. What should I do? I don't want to update via RUU. Thanks
dohcvtec said:
Hey guys. Just went to stock recovery. Unzipped from ota.zip>installed it>recovery works>phone reboot into system>finds the new update>starts to install>rebokts to recovery>starts updating up to 24%25% and then gets me back to recovery saying there is some error. What should I do? I don't want to update via RUU. Thanks
Click to expand...
Click to collapse
100% working method. keep these conditions and everything is working and updated - unlocked cid BS__US001 S-OFF mid 0PJA11000. then install from sd card 0PJAIMG nougat download the update OTA 4.19.617.1 and everything is fine to install without errors!!!!!!!!!!!! check for yourself!!!!!
asar201 said:
100% working method. keep these conditions and everything is working and updated - unlocked cid BS__US001 S-OFF mid 0PJA11000. then install from sd card 0PJAIMG nougat download the update OTA and everything is fine to install without errors!!!!!!!!!!!! check for yourself!!!!!
Click to expand...
Click to collapse
But if I follow those steps, this means fresh new install of the os which is basically the same as RUU install. Or you nent something else? Thanks
P. S. I just fully unrooted my phone so now it is exactly the way you described above but the new update still doesn't install. It gives me this error and I don't understand why: 'system parition has unexpected contents'
dohcvtec said:
But if I follow those steps, this means fresh new install of the os which is basically the same as RUU install. Or you nent something else? Thanks
P. S. I just fully unrooted my phone so now it is exactly the way you described above but the new update still doesn't install. It gives me this error and I don't understand why: 'system parition has unexpected contents'
Click to expand...
Click to collapse
hi.a poor understanding of English and how to correctly put on this site files. I had the same problem. phone-htc__a07 no rooted android 6.0 twrp recovery. OTA updates do not come to android 7.0. write step by step what did was changed the cid to BS__US001,mid on 0PJA11000.restored twrp backup http://forum.xda-developers.com/one-m9/development/one-m9-4-14-617-6-stock-root-twrp-backup-t3518149 then came the notice about the ota updates until they 4.19.617.1 but I have not installed the same as yours.https://drive.google.com/drive/folders/0BwrbLN0SdCTgQ2NseVMtdDhXV3c?usp=sharing I flashed these recovery and firmware and after that everything was installed.try. flash a twrp backup of course is not necessary if you already is 7.0 skip this step...
Hello,
Reporting back.
So what I did was, I took the RUU, flashed RUU, then updated to the newest update with no problem. Had no issues restoring my phone exactly how it was before to flash the RUU. Phone restored automatically from google account. The only thing which didn't restore was my wallpaper (like I care about it ). So that's it. Thank you very much for your help.
Best Regards
dohcvtec said:
Hello,
Reporting back.
So what I did was, I took the RUU, flashed RUU, then updated to the newest update with no problem. Had no issues restoring my phone exactly how it was before to flash the RUU. Phone restored automatically from google account. The only thing which didn't restore was my wallpaper (like I care about it ). So that's it. Thank you very much for your help.
Best Regards
Click to expand...
Click to collapse
couldn't tell what ruu was flashed? and what was your cid and mid?
asar201 said:
couldn't tell what ruu was flashed? and what was your cid and mid?
Click to expand...
Click to collapse
The RUU that I flashed is the official version from HTC website. Flashed it through laptop. CID BS_US001 MID 0PJA11000
dohcvtec said:
The RUU that I flashed is the official version from HTC website. Flashed it through laptop. CID BS_US001 MID 0PJA11000
Click to expand...
Click to collapse
thanks for inform ))))
I just wanted to add to the list of install methods. Here is what I attempted.
All attempts with MID 0PJA11000:
Rooted 4.14.617.6 with TWRP recovery and CID BS_US001 - OTA failed (doesnt hurt to try )
Flashing RUU 4.14.617.6.exe with CID BS_US001 - OTA failed
Flashing RUU 4.14.617.6.exe with CID 11111111 - OTA failed
Flashing RUU 4.14.617.6.zip with CID 11111111 - OTA failed
After the above line and changing the CID to BS_US001 - successful
It appears you must run an ruu.zip to accept the OTA no matter what. Strange the exe's will not work. It also appears the master CID no longer works. Surprisingly I was able to change the CID after running the .zip install and still accept the OTA with no problems.
asar201 said:
100% working method. keep these conditions and everything is working and updated - unlocked cid BS__US001 S-OFF mid 0PJA11000. then install from sd card 0PJAIMG nougat download the update OTA 4.19.617.1 and everything is fine to install without errors!!!!!!!!!!!! check for yourself!!!!!
Click to expand...
Click to collapse
asar201 I did want to ask and make sure, did you use double __ in your CID or just one _?
BrownEye02 said:
I just wanted to add to the list of install methods. Here is what I attempted.
All attempts with MID 0PJA11000:
Rooted 4.14.617.6 with TWRP recovery and CID BS_US001 - OTA failed (doesnt hurt to try )
Flashing RUU 4.14.617.6.exe with CID BS_US001 - OTA failed
Flashing RUU 4.14.617.6.exe with CID 11111111 - OTA failed
Flashing RUU 4.14.617.6.zip with CID 11111111 - OTA failed
After the above line and changing the CID to BS_US001 - successful
It appears you must run an ruu.zip to accept the OTA no matter what. Strange the exe's will not work. It also appears the master CID no longer works. Surprisingly I was able to change the CID after running the .zip install and still accept the OTA with no problems.
asar201 I did want to ask and make sure, did you use double __ in your CID or just one _?
Click to expand...
Click to collapse
Hello...a double underline!!! you and all who can help spread the link twrp backup, installed the OTA to 4.19.617.1. those who are not from Russia in the file, replace gps.conf data on your country,because in my backup it changed to ru.pool.ntp.org for a quick search of satellites in twrp recovery without installing a root file Manager copy the modified gps.conf (system\etc). p.s. Change CID (only if S-OFF) fastboot oem writecid BS__US001 reboot fastboot Change MID (only if there is S-OFF) fastboot oem writemid 0PJA11000 fastboot reboot. there's also posted the stock recovery and firmware. if you wish to flash from sd card file rom.zip folder 4.14.617.6 RUU rename 0PJAIMG.zip and copy to sd card restart your device in download mode. don't know what else to add... ))) if you have any questions...write. https://drive.google.com/drive/folders/0BwrbLN0SdCTgQ2NseVMtdDhXV3c?usp=sharing
Hi,
I have an unlocked Australian HTC 10 (CID:HTC_039)
I've been running Viper 10 from Venom ROMs but sadly that's ceased development. So I'd like to switch over to LeeDroid (or even back to stock rom and root) and get the Oreo update. However as far as I can find HTC haven't released an RUU for my device. So I'm thinking perhaps I could use sunshine to s-off, then change my CID (though I'm not totally sure yet how that is done) and use an RUU that way to get the Oreo update - I should then be able to install LeeDroid as well with Oreo I think as the RUU will give me the firmware for Oreo?
I'm concerned that I could loose my cellular and/or Wi-Fi and other radios though? which would be a serious issue... I read about changing radio firmware - do I need to do this and would it break my connections? perhaps change the radio bands it supports?
Thanks for helping out a total noob!
debatingrooster said:
Hi,
I have an unlocked Australian HTC 10 (CID:HTC_039)
I've been running Viper 10 from Venom ROMs but sadly that's ceased development. So I'd like to switch over to LeeDroid (or even back to stock rom and root) and get the Oreo update. However as far as I can find HTC haven't released an RUU for my device. So I'm thinking perhaps I could use sunshine to s-off, then change my CID (though I'm not totally sure yet how that is done) and use an RUU that way to get the Oreo update - I should then be able to install LeeDroid as well with Oreo I think as the RUU will give me the firmware for Oreo?
I'm concerned that I could loose my cellular and/or Wi-Fi and other radios though? which would be a serious issue... I read about changing radio firmware - do I need to do this and would it break my connections? perhaps change the radio bands it supports?
Thanks for helping out a total noob!
Click to expand...
Click to collapse
Hey, there is an RUU available in the AUS thread. I changed my CID from Vodafone aus to WWE. The only thing you lose is VOLTE. Other than that I get good reception and data. Oreo isn't out yet for Australia so it all depends on what your really want to do with your phone. SOFF was well worth the money for me.
Here is a few links for you to read. Let me know if you have an more questions.
AUS RUU
https://forum.xda-developers.com/htc-10/how-to/australia-htc-10-australian-t3393941/page41
De Brand thread. (how to change CID)
https://forum.xda-developers.com/htc-10/how-to/guide-how-to-drand-convert-htc-10-to-t3374593
yldlj said:
Hey, there is an RUU available in the AUS thread. I changed my CID from Vodafone aus to WWE. The only thing you lose is VOLTE. Other than that I get good reception and data. Oreo isn't out yet for Australia so it all depends on what your really want to do with your phone. SOFF was well worth the money for me.
Here is a few links for you to read. Let me know if you have an more questions.
AUS RUU
https://forum.xda-developers.com/htc-10/how-to/australia-htc-10-australian-t3393941/page41
De Brand thread. (how to change CID)
https://forum.xda-developers.com/htc-10/how-to/guide-how-to-drand-convert-htc-10-to-t3374593
Click to expand...
Click to collapse
Thanks for the reply - Can't believe I never found that RUU... In any case I've used sunshine to S-OFF and changed my CID & MID to accept an RUU for US-Unlocked at the moment. But I can't find an oreo RUU where the MID and CID are known so that I can flash it to get the firmware updated and make it compatible with leedroid (based on oreo)
I've also lost cellular connectivity but that happened before I S-OFFed so I hope that's just fixable by formatting everything...
debatingrooster said:
Thanks for the reply - Can't believe I never found that RUU... In any case I've used sunshine to S-OFF and changed my CID & MID to accept an RUU for US-Unlocked at the moment. But I can't find an oreo RUU where the MID and CID are known so that I can flash it to get the firmware updated and make it compatible with leedroid (based on oreo)
I've also lost cellular connectivity but that happened before I S-OFFed so I hope that's just fixable by formatting everything...
Click to expand...
Click to collapse
Download this ruu zip file
https://androidfilehost.com/?w=files&flid=242523
Rename the file to 2PS6IMG.zip
Place on external SD card
Boot to download mode
Press vol up to flash.
After its flashed Turn phone back on make sure everything is working stock. Then flash latest twrp followed by leedroid.
yldlj said:
Download this ruu zip file
https://androidfilehost.com/?w=files&flid=242523
Rename the file to 2PS6IMG.zip
Place on external SD card
Boot to download mode
Press vol up to flash.
After its flashed Turn phone back on make sure everything is working stock. Then flash latest twrp followed by leedroid.
Click to expand...
Click to collapse
Ok I've done that (haven't done TWRP yet) and cellular is back!!
Thanks heaps - Will update here if there's anymore problems!
So for anyone following along behind it all works fine - although the Oreo update is basically uninteresting IMO. Probably staying on Viper 10 Nougat would have been better...
debatingrooster said:
So for anyone following along behind it all works fine - although the Oreo update is basically uninteresting IMO. Probably staying on Viper 10 Nougat would have been better...
Click to expand...
Click to collapse
Once kernel source is released and we get a custom kernel things will be alot better with battery and customizations.
Here's hoping, although I've never used a custom kernel. Any recommendations for customising apps available for HTC 10 Oreo now?
Thanks for all your help
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) current-slot:
(bootloader) imei: 3542xxxxxxxxxxxx
(bootloader) version-main: 2.42.710.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: VODAP021
Hello i am at the same exact situation with you, being doing a bit of research on how to fix this. this is so far what i learned, flash firmware and flash oreo rom.
currently i am in S-on but i will s-off after i get the whole idea and correct file to do the firmware flashing, the thing is i still not sure how to flash firmware and where to get the correct file, or i have to change my cid and mid to find the matched firmware, mind to guide me in that?
minwater said:
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) current-slot:
(bootloader) imei: 3542xxxxxxxxxxxx
(bootloader) version-main: 2.42.710.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: VODAP021
Hello i am at the same exact situation with you, being doing a bit of research on how to fix this. this is so far what i learned, flash firmware and flash oreo rom.
currently i am in S-on but i will s-off after i get the whole idea and correct file to do the firmware flashing, the thing is i still not sure how to flash firmware and where to get the correct file, or i have to change my cid and mid to find the matched firmware, mind to guide me in that?
Click to expand...
Click to collapse
Hey - so what I did is this:
https://forum.xda-developers.com/showpost.php?p=66750161&postcount=4
But use this firmware instead
https://androidfilehost.com/?fid=818070582850487062
Hope that helps
debatingrooster said:
Hey - so what I did is this:
https://forum.xda-developers.com/showpost.php?p=66750161&postcount=4
But use this firmware instead
https://androidfilehost.com/?fid=818070582850487062
Hope that helps
Click to expand...
Click to collapse
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
---------- Post added at 07:37 AM ---------- Previous post was at 07:36 AM ----------
debatingrooster said:
Hey - so what I did is this:
https://forum.xda-developers.com/showpost.php?p=66750161&postcount=4
But use this firmware instead
https://androidfilehost.com/?fid=818070582850487062
Hope that helps
Click to expand...
Click to collapse
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
what cid and mid i should change to?
minwater said:
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
---------- Post added at 07:37 AM ---------- Previous post was at 07:36 AM ----------
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
what cid and mid i should change to?
Click to expand...
Click to collapse
Right now the custom ROMs for the HTC 10 all seem to be based on Nougat firmware - if you follow the steps I gave you you'll end up with oreo firmware - so if you want a custom rom don't follow those steps - just install it now using TWRP (assuming you are running Nougat at the moment)
debatingrooster said:
Right now the custom ROMs for the HTC 10 all seem to be based on Nougat firmware - if you follow the steps I gave you you'll end up with oreo firmware - so if you want a custom rom don't follow those steps - just install it now using TWRP (assuming you are running Nougat at the moment)
Click to expand...
Click to collapse
i updated my phone to Leedroid 5.1 which is base on oreo, got bootloop and i went back to leedroid 4, and problem occur. can i flash to leedroid 5.0 which is oreo based after i flash the firmware? what cid and mid i should change to?
thank you for your help.!
minwater said:
i updated my phone to Leedroid 5.1 which is base on oreo, got bootloop and i went back to leedroid 4, and problem occur. can i flash to leedroid 5.0 which is oreo based after i flash the firmware? what cid and mid i should change to?
thank you for your help.!
Click to expand...
Click to collapse
Yes you can. You need to be on Oreo firmware for his ROM. you need to S off your phone and change CID, I recommend you follow the guide in the link above, debrand to WWE using RUU.zip. Just follow that guide step by step and once you have the phone running take the OTA to Oreo then flash twrp follwed by leedroid ROM
Edit: because you flashed leedroid rom then went back to Nougat you want have baseband but once your running Oreo rom it will return.
yldlj said:
Yes you can. You need to be on Oreo firmware for his ROM. you need to S off your phone and change CID, I recommend you follow the guide in the link above, debrand to WWE using RUU.zip. Just follow that guide step by step and once you have the phone running take the OTA to Oreo then flash twrp follwed by leedroid ROM
Edit: because you flashed leedroid rom then went back to Nougat you want have baseband but once your running Oreo rom it will return.
Click to expand...
Click to collapse
now my phone is rooted, so step by stem is
1. S-off using sunshine
2. change CID and MID to HTC_001 and 2ps620000 (by the guide)
3.Flash RUU
https://androidfilehost.com/?w=files&flid=242523
tell me if the file is correct. there is 2 which one?
4.flash custom recovery again (i am using 3.2.1-2)
5.flash custom rom
let me know if something wrong thank you:angel:
minwater said:
now my phone is rooted, so step by stem is
1. S-off using sunshine
2. change CID and MID to HTC_001 and 2ps620000 (by the guide)
3.Flash RUU
https://androidfilehost.com/?w=files&flid=242523
tell me if the file is correct.
4.flash custom recovery again (i am using 3.2.1-2)
5.flash custom rom
let me know if something wrong thank you:angel:
Click to expand...
Click to collapse
Wrong RUU. there is no RUU for WWE yet and that RUU won't flash unless you have Oreo firmware. So like I said follow the debrand to WWE using RUU.zip. the RUU is posted in that thread all you have to do is follow the Instructions. Once everything is done and you have flashed the RUU boot the phone up (you won't have radio) use Wi-Fi to take the OTA to Oreo. Flash latest twrp because RUU will flash stock recovery then flash leedroid ROM.
So steps would be
1: Obtain S OFF
2: Change CID to HTC__001, MID is the same so don't need to change that.
3: FLASH 2.41.401.41 RUU
4: Take OTA
5: Flash latest twrp, a new twrp was posted yesterday
6: Flash Leedroid.
yldlj said:
Wrong RUU. there is no RUU for WWE yet and that RUU won't flash unless you have Oreo firmware. So like I said follow the debrand to WWE using RUU.zip. the RUU is posted in that thread all you have to do is follow the Instructions. Once everything is done and you have flashed the RUU boot the phone up (you won't have radio) use Wi-Fi to take the OTA to Oreo. Flash latest twrp because RUU will flash stock recovery then flash leedroid ROM.
So steps would be
1: Obtain S OFF
2: Change CID to HTC__001, MID is the same so don't need to change that.
3: FLASH 2.41.401.41 RUU
4: Take OTA
5: Flash latest twrp, a new twrp was posted yesterday
6: Flash Leedroid.
Click to expand...
Click to collapse
thank you! s-off ed, doing the OTA now!! should b alright ad i guess?
minwater said:
thank you! s-off ed, doing the OTA now!! should b alright ad i guess?
Click to expand...
Click to collapse
Should be all good. After OTA boot the phone make sure everyone is working. If you want to after that flash twrp then leedroid. :good:
yldlj said:
Should be all good. After OTA boot the phone make sure everyone is working. If you want to after that flash twrp then leedroid. :good:
Click to expand...
Click to collapse
a question, the main point of s-off is we r able to flash the firmware ourself? but to match the firmware we need the same CID and MID, am i correct?
minwater said:
a question, the main point of s-off is we r able to flash the firmware ourself? but to match the firmware we need the same CID and MID, am i correct?
Click to expand...
Click to collapse
Yes. modified firmwares as well. As you took OTA to Oreo there is no need to flash any firmware.