Develop Bugs

A problem with my m8? I will not start

Hy guys, i hope someone can help me with this one.
I try the other days to root my phone, and all got smoth, then i update my firmware because WiFi will not work and i read somewhere that will be problem. And i update my firmware too, all was good, everything instaled sucefull but when i try to open it stay blocked on main screen. How to make more clear than that? The phone freeze where the HTC logo appear, i can't do anything more than that.
Some info i can get from fastboot:
*** Software status: Modified ***
*** RELOCKED ***
M8_UL_CA PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.21.213311491.A04G
OpenDSP-v47.2.2-00564-M8974_F0.1024
OS-3.11.1700.5
eMMC- boot 2048MB
I think when i installed the firmware the proces delete everything on my phone, i dont have recovery or anything else. Can someone help please to restore to stock? Or at least to a soft that my phone to work?
Thanks! (And sorry for my bad english, not my first language)

pant3ras said:
Hy guys, i hope someone can help me with this one.
I try the other days to root my phone, and all got smoth, then i update my firmware because WiFi will not work and i read somewhere that will be problem. And i update my firmware too, all was good, everything instaled sucefull but when i try to open it stay blocked on main screen. How to make more clear than that? The phone freeze where the HTC logo appear, i can't do anything more than that.
Some info i can get from fastboot:
*** Software status: Modified ***
*** RELOCKED ***
M8_UL_CA PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.21.213311491.A04G
OpenDSP-v47.2.2-00564-M8974_F0.1024
OS-3.11.1700.5
eMMC- boot 2048MB
I think when i installed the firmware the proces delete everything on my phone, i dont have recovery or anything else. Can someone help please to restore to stock? Or at least to a soft that my phone to work?
Thanks! (And sorry for my bad english, not my first language)
Click to expand...
Click to collapse
You still have KitKat firmware, as shown by your OS version. You CANNOT flash a modified firmware package while S-On. You need to either run a signed RUU, or go back to stock and use HTC's/your carrier's OTA updates.

Do you have a stock ruu? or maybe how to s-off? because i cant find anywhere firewater.
Maybe this will help with something:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.057s

So can anybody can help me? Please i am stuck on this. And when i want to flash the RUU from AT&T i still get the error 155: Unknow Error. Can someone help me? Please.

What firmware did you try to flash? It looks like it was GPE firmware.
Is your bootloader screen black or white now?

My bootloader screen it's black, it's that important?...
And the firmware was download from HDRevolution website.

pant3ras said:
My bootloader screen it's black, it's that important?...
Click to expand...
Click to collapse
Yup, that's very important. Black hboot screen is the GPE version (and white is Sense version hboot). You at least partially flashed a GPE firmware. This isn't supposed to happen with s-on (firmware for other versions should be blocked). But I do remember a while back, a few folks having the same issue; where a GPE firmware or RUU partially flashed (with s-on) and caused some problems.
pant3ras said:
And the firmware was download from HDRevolution website.
Click to expand...
Click to collapse
That doesn't help. Quite a few firmwares are posted there. What specific number firmware did you flash? Did you flash the firmware number (3.11.1700.5) shown OS number on your hboot screen?
---------- Post added at 12:03 PM ---------- Previous post was at 12:03 PM ----------
pant3ras said:
And when i want to flash the RUU from AT&T i still get the error 155: Unknow Error.
Click to expand...
Click to collapse
What RUU (file name) are you trying to flash?

redpoint73 said:
That doesn't help. Quite a few firmwares are posted there. What specific number firmware did you flash? Did you flash the firmware number (3.11.1700.5) shown OS number on your hboot screen?
Click to expand...
Click to collapse
The firmware i flash was 3.11.1700.5 yes.
redpoint73 said:
What RUU (file name) are you trying to flash?
Click to expand...
Click to collapse
That from the official page, this one:
"RUU_M8_UL_L50_SENSE60_ATT[email protected]_40.45.C33065.00_F_release_446225_signed_2"
And also i was trying with this one:
RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4 I dont know where exactly i find this one, but this one like the one above give me the same error, now and before trying rooting my htc.

pant3ras said:
The firmware i flash was 3.11.1700.5 yes.
Click to expand...
Click to collapse
I don't know why you flashed this. Not only is it not current firmware (Kitkat, as another noted before), but its not even for your version (its GPE version firmware, as I mentioned).
pant3ras said:
That from the official page, this one:
"RUU_M8_UL_L50_SENSE60_ATT[email protected]_40.45.C33065.00_F_release_446225_signed_2"
Click to expand...
Click to collapse
That is the proper RUU for the AT&T version; and your bootloader is relocked, as it should be for RUU.
So I think the problem is the GPE firmware you flashed before.
Try flashing the proper firmware first, then RUU again, and hopefully that will work.
I can't find the 4.28.502.2 firmware. But 4.28.502.1 firmware is posted on the following. Use the Full stock firmware. Hopefully, this is close enough to 4.28.502.2 to work.
EDIT: Forgot to post the firmware link: https://docs.google.com/spreadsheets/d/1aNd_nm4Em1wamRLFT7qHM2c3O9_sg_H3ztBrGq1u9Ws/pubhtml
pant3ras said:
And also i was trying with this one:
RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4 I dont know where exactly i find this one, but this one like the one above give me the same error, now and before trying rooting my htc.
Click to expand...
Click to collapse
That RUU will not work, anyway. Its for the Developer Edition, so the only way to run it would be to change your CID (s-off required, and working OS is needed to s-off).
---------- Post added at 01:02 PM ---------- Previous post was at 01:00 PM ----------
pant3ras said:
or maybe how to s-off? because i cant find anywhere firewater.
Click to expand...
Click to collapse
Firewater was discontinued by its devs in December 2014. Since it has an online component (needed to connect to servers), it won't work even if you find the firewater binary.
Sunshine is the only current working s-off method, and as I mentioned, it requires a working OS to work.

redpoint73 said:
I don't know why you flashed this. Not only is it not current firmware (Kitkat, as another noted before), but its not even for your version (its GPE version firmware, as I mentioned).
Click to expand...
Click to collapse
I flash that firmware because have my cidnum and modelid, and i read that the firmware need to have the same cidnum and modelid.
redpoint73 said:
I can't find the 4.28.502.2 firmware. But 4.28.502.1 firmware is posted on the following. Use the Full stock firmware. Hopefully, this is close enough to 4.28.502.2 to work
Click to expand...
Click to collapse
Where can i find this firmware?
And i didn't know that firewater doesnt work anymore, and sunshine i think you have to pay 25$ per month, right?

pant3ras said:
I flash that firmware because have my cidnum and modelid, and i read that the firmware need to have the same cidnum and modelid.
Click to expand...
Click to collapse
Yes, firmware needs to have the same CID and MID. But the 3.11.1700.5 firmware doesn't go with your CID and MID (CWS__001 and 0P6B12000)
"1700" firmwares (such as 3.11.1700.5) are for the Google Play Edition (GPE) with CID of GOOGL001 and MID of 0P6B17000.
Proper firmwares for your AT&T CID and MID will have the number "502" in the position x.xx.502.x
pant3ras said:
Where can i find this firmware?
Click to expand...
Click to collapse
Sorry, forgot to post the link. I had the page open, and everything: https://docs.google.com/spreadsheets/d/1aNd_nm4Em1wamRLFT7qHM2c3O9_sg_H3ztBrGq1u9Ws/pubhtml
pant3ras said:
And i didn't know that firewater doesnt work anymore, and sunshine i think you have to pay 25$ per month, right?
Click to expand...
Click to collapse
That's right. And as I already stated, sunshine requires a working OS, which you don't have. And since getting the OS working again seems to be the main reason you want to get s-off, you see its quite pointless.

redpoint73 said:
Sorry, forgot to post the link. I had the page open, and everything: https://docs.google.com/spreadsheets/d/1aNd_nm4Em1wamRLFT7qHM2c3O9_sg_H3ztBrGq1u9Ws/pubhtml.
Click to expand...
Click to collapse
No problem And to flash this firmware i can do it like this:
f you are S-ON ---> Re-lock your bootloader (this will most probably wipe content of your device)
If you are S-OFF ---> no need to re-lock the bootloader.
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet or in case it's S-ON)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
Click to expand...
Click to collapse

pant3ras said:
No problem And to flash this firmware i can do it like this:
Click to expand...
Click to collapse
Yes, exactly.

redpoint73 said:
Yes, exactly.
Click to expand...
Click to collapse
I get this error when i try to flash the firmware:
C:\adb>fastboot flash zip firmware.zip
target reported max download size of 1826418688 bytes
sending 'zip' (57484 KB)...
OKAY [ 2.570s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 5.611s
Click to expand...
Click to collapse

pant3ras said:
I get this error when i try to flash the firmware:
Click to expand...
Click to collapse
You used the "full stock" firmware 4.28.502.1, correct? Not the "Combined, No wipe" one?
You can also try the 3.42.502.1 firmware.

redpoint73 said:
You used the "full stock" firmware 4.28.502.1, correct? Not the "Combined, No wipe" one?
You can also try the 3.42.502.1 firmware.
Click to expand...
Click to collapse
Yes, i use the full stock firmware. Now i will try with 3.42.502.1
Later edit: I get the same error when i try with the 3.42.502.1 stock

pant3ras said:
Yes, i use the full stock firmware. Now i will try with 3.42.502.1
Later edit: I get the same error when i try with the 3.42.502.1 stock
Click to expand...
Click to collapse
Those might be unsigned firmwares, but I thought they were signed.
I think your options at this point:
1) Find signed firmwares of the versions I recommended.
2) Unlock the bootloader again, flash TWRP again, then flash a 3.xx based custom or stock ROM (which will have working WiFi). Then s-off by sunshine so you can fix the firmware (will allow an unsigned firmware to be flashed).
Another thing to note, when you flashed the GPE firmware, it reverted the recovery back to stock recovery. Which is why you no longer have custom recovery.

redpoint73 said:
Those might be unsigned firmwares, but I thought they were signed.
I think your options at this point:
1) Find signed firmwares of the versions I recommended.
2) Unlock the bootloader again, flash TWRP again, then flash a 3.xx based custom or stock ROM (which will have working WiFi). Then s-off by sunshine so you can fix the firmware (will allow an unsigned firmware to be flashed).
Another thing to note, when you flashed the GPE firmware, it reverted the recovery back to stock recovery. Which is why you no longer have custom recovery.
Click to expand...
Click to collapse
And how i can unlock the bootloader again? and flash the TWRP?

pant3ras said:
And how i can unlock the bootloader again? and flash the TWRP?
Click to expand...
Click to collapse
Unlock the bootloader by HTCDev.com. Then flash TWRP with fastboot.

redpoint73 said:
Unlock the bootloader by HTCDev.com. Then flash TWRP with fastboot.
Click to expand...
Click to collapse
Ok, i succed to instal the TWRP and i unlock the phone, but i have no ideea what rom to instal. Can you help me with that please? I'm scare i will broke my phone again if i install something on my own again )

How to update Marshmallow from version-main: 3.31.512.2

Hello everyone. I want to update my phone to Marshmallow. However, I do not know what I am going to do next since I have ''version-main: 3.31.512.2''. I have read threads about same version that says after custom roms their phone cannot get connection. My phone is Unlocked and S-off. Can anyone tell me what I am going to do? Also which rom is suitable fit this?
Thank you .
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0926
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.31.512.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT43ASF07459
(bootloader) imei: 352,,,,,,,,,,,,,,
(bootloader) imei2: Not Support
(bootloader) meid: 99000499829719
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B20000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 2e9b7c51
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse

alakazam0 said:
I have read threads about same version that says after custom roms their phone cannot get connection. Also which rom is suitable fit this?
Click to expand...
Click to collapse
As you've somewhat figured out, current ROMs are likely going to give you issues due to your outdated firmware (hboot, radio, etc.).
Best bet is to run the Verizon MM RUU (will wipe the phone, so backup anything you want to keep to removable SD or off the phone, before RUU).
http://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845
From there, you can install TWRP and current ROMs, and I would recommend sticking to ROMs that specifically support the VZN version M8.

redpoint73 said:
As you've somewhat figured out, current ROMs are likely going to give you issues due to your outdated firmware (hboot, radio, etc.).
Best bet is to run the Verizon MM RUU (will wipe the phone, so backup anything you want to keep to removable SD or off the phone, before RUU).
http://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845
From there, you can install TWRP and current ROMs, and I would recommend sticking to ROMs that specifically support the VZN version M8.
Click to expand...
Click to collapse
Thank you for answering. since my current rom is 4.4.4 do I need to flash 4.4.4 ? or Can i update marshmallow with your link ?

alakazam0 said:
Thank you for answering. since my current rom is 4.4.4 do I need to flash 4.4.4 ? or Can i update marshmallow with your link ?
Click to expand...
Click to collapse
You don't need to flash 4.4.4. But that does make me remember one thing, the MM (6.0) RUUs have a new requirement, where you can't go from a past version to MM, unless you manually flash the MM firmware first.
So if you get Error 155 or 159 flashing the MM RUU; you'll need to find and flash the matching (6.21.605.3) firmware zip first, then RUU.
Either that, or just run the Lollipop RUU, for which the current MM ROMs should still work fine (with LP firmware).
Another possible approach, is to just find the 6.21.605.3 firmware, flash it, then install TWRP and a ROM (since its really just the firmware we need, anyway).

alakazam0 said:
Thank you for answering. since my current rom is 4.4.4 do I need to flash 4.4.4 ? or Can i update marshmallow with your link ?
Click to expand...
Click to collapse
Yours is a LRA device and as far as I know there is no Marshmallow update for your device version.
The latest update is Lollipop 4.21.512.4
I suggest you install 4.21.512.4 RUU then check for OTA to see is there any further update to Marshmallow.
http://forum.xda-developers.com/showpost.php?p=66044439&postcount=37
Once your firmware is updated to 4.21.512.4, that's good enough for you to install Marshmallow custom ROM, of course you need to use one with VZW support.
I read before flashing a VZW firmware on a LRA device may break your network unless you flash it without VZW rcdata.img

ckpv5 said:
I read before flashing a VZW firmware on a LRA device may break your network unless you flash it without VZW rcdata.img
Click to expand...
Click to collapse
Good to know. Thanks for that, as I was not aware.
I realized the device was LRA from the "512" version number, but figured it would be okay to flash VZN firmware, since OP has SuperCID.
Moral of the story: do as ckpv5 says!

redpoint73 said:
Good to know. Thanks for that, as I was not aware.
I realized the device was LRA from the "512" version number, but figured it would be okay to flash VZN firmware, since OP has SuperCID.
Moral of the story: do as ckpv5 says!
Click to expand...
Click to collapse
Thanks again. I used to use Samsung phones and flashing new roms was really easy. I do not understand what RUU is on HTC. Can anyone give me the links and instructions that I need to follow? I just want to use Marshmallow on my phone. Because of this cellular data issues and my current rom and other parameters I do not what i am going to do.
By the way, thank you so much for your helps.

alakazam0 said:
I do not understand what RUU is on HTC. Can anyone give me the links and instructions that I need to follow?
Click to expand...
Click to collapse
RUU = ROM Update Utility. Its a HTC tool that will update/rewrite all partitions to stock factory condition (and will wipe the phone).
The link is already given, as well as instructions; although they are brief ones. If you have specific questions on the process, ask and we will help.

redpoint73 said:
RUU = ROM Update Utility. Its a HTC tool that will update/rewrite all partitions to stock factory condition (and will wipe the phone).
The link is already given, as well as instructions; although they are brief ones. If you have specific questions on the process, ask and we will help.
Click to expand...
Click to collapse
A bit too late, but could you please help me out? I'm running 4.4.4 (version 3.31.512.2) and I want to update to Lollipop and eventually to Marshmallow. As you mentioned, there is already a link given and I have downloaded it. The issue is I don't have an SD card atm and would like to know an alternate approach.

BryanNikson said:
A bit too late, but could you please help me out? I'm running 4.4.4 (version 3.31.512.2) and I want to update to Lollipop and eventually to Marshmallow. As you mentioned, there is already a link given and I have downloaded it. The issue is I don't have an SD card atm and would like to know an alternate approach.
Click to expand...
Click to collapse
You can follow this guide but use your downloaded RUU zip (not the one in the guide)
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6

ckpv5 said:
You can follow this guide but use your downloaded RUU zip (not the one in the guide)
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Click to expand...
Click to collapse
Thank you so much. I figured there's no official Marshmallow update for my device, I'd be grateful if you could recommend me a custom ROM that's more or less identical to the official version

BryanNikson said:
Thank you so much. I figured there's no official Marshmallow update for my device, I'd be grateful if you could recommend me a custom ROM that's more or less identical to the official version
Click to expand...
Click to collapse
That's hard for me to recommend because I have a GSM but yours is a LRA. You can only install ROM with Verizon support.
Maybe for a start, this one : http://forum.xda-developers.com/ver...-4-17-605-9-stock-resources-firmware-t3196906
Just note that you can install ROM but not the firmware.

ckpv5 said:
That's hard for me to recommend because I have a GSM but yours is a LRA. You can only install ROM with Verizon support.
Maybe for a start, this one : http://forum.xda-developers.com/ver...-4-17-605-9-stock-resources-firmware-t3196906
Just note that you can install ROM but not the firmware.
Click to expand...
Click to collapse
I am actually now getting around to updating. I just want to know some things if you could help me with
1. If I install the firmware first, would my boatloader lock? Or can I just not do this process at all?
2. Can I install this ROM with the stock recovery?
3. Will not installing the firmware affect anything at all?
Sorry for n00b questions, I might be overcomplicating things here

My responses below, in red.
BryanNikson said:
I am actually now getting around to updating. I just want to know some things if you could help me with
1. If I install the firmware first, would my boatloader lock? Or can I just not do this process at all?
No, firmware won't lock the bootloader.
2. Can I install this ROM with the stock recovery?
No, you need custom recovery TWRP.
3. Will not installing the firmware affect anything at all?
To be clear I do think you need to RUU up to Lollipop first, then install the MM ROM. From there, I don't think you need MM firmware.
Click to expand...
Click to collapse

redpoint73 said:
My responses below, in red.
Click to expand...
Click to collapse
Thanks. I'm on Lollipop atm, think it should be smooth sailing from here.

redpoint73 said:
My responses below, in red.
Click to expand...
Click to collapse
Oh not really, I just suck. I'm S-OFF and have a Super CID, but how do I unlock my bootloader?
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.12.20.1211
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.21.512.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ***
(bootloader) imei: ***
(bootloader) imei2: Not Support
(bootloader) meid: 99000499707454
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B20000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: b361cfc7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

BryanNikson said:
Oh not really, I just suck. I'm S-OFF and have a Super CID, but how do I unlock my bootloader?
Click to expand...
Click to collapse
Presumably you (or somebody else) used the sunshine app to s-off. If so, you should be able to use the sunshine app again without paying. Sunshine can unlock the bootloader, since its already s-off.
http://theroot.ninja/download.html

alakazam0 said:
Hello everyone. I want to update my phone to Marshmallow. However, I do not know what I am going to do next since I have ''version-main: 3.31.512.2''. I have read threads about same version that says after custom roms their phone cannot get connection. My phone is Unlocked and S-off. Can anyone tell me what I am going to do? Also which rom is suitable fit this?
Thank you .
Click to expand...
Click to collapse
Sent from my GT-I9060I using Tapatalk

moamedali378 said:
Sent from my GT-I9060I using Tapatalk
Click to expand...
Click to collapse
Is there something you meant to post or ask, besides just quoting a previous post?

redpoint73 said:
Is there something you meant to post or ask, besides just quoting a previous post?
Click to expand...
Click to collapse
Hi, I just bought this great phone, and I need your help, I want to install MM, my HTC is the European Version Model OP6B100, Android 4.4.4, firmware 3.31.512.2, It is S-OFF, is unlocked, rooted and I have install TWRP, and I successfully Installed a Custom Marshmallow but after reboot just go straight to Bootloader, It does not load the ROM, I read and I understood We cannot jump from KITKAT to MM, I also installed LP but same happened. Help me to install LP and then LP, by the way ROMs I used were HD revolution.
Thanks in advanced.

Need help find correct RUU for One M8

Hello dear friends..
I've been searching for a long time now for stock marshmallow RUU but not able to find the correct one. Here are some of my phone's details from
fastboot getvar all
Product: m8_ul
ModelID: 0P6B65000
Cidnum: HTC_038
Version bootloader: 3.19.0.0000
Baseband:1.24.21331147A1.09G
Version main: 4.18.720.8
PVT SHIP S-ON
I currently have CyanogenMod 14 (Nougat) installed with TWRP recovery.
From the HTC site I tried to download developer edition of RUU but it didn't work.
Please give me the link of RUU and also try to explain how did you find out which one to use.

I remember that you said you already have that RUU long time ago.
Yeah .. this is what you said - https://forum.xda-developers.com/showpost.php?p=63818154&postcount=8
So, what happens now ?

here is the marshmallow signed RUU.zip ( credit to another forum )
https://drive.google.com/file/d/0B7BOa8GJv0vNNklHVWxhRXpZRHc/view?pref=2&pli=1
and here is lollipop RUU.exe ( credit to AndroidRUU ) this is your current firmware you can install this then do OTA to the above or flash the above direct
http://androidruu.com/getdownload.p...09G_20.68.4196.01_F_release_417228_signed.exe
about how to find the correct RUU is by using the details you posted
Product: m8_ul
ModelID: 0P6B65000
Cidnum: HTC_038
Version bootloader: 3.19.0.0000
Baseband:1.24.21331147A1.09G
Version main: 4.18.720.8
PVT SHIP S-ON
Click to expand...
Click to collapse

ckpv5 said:
I remember that you said you already have that RUU long time ago.
Yeah .. this is what you said - https://forum.xda-developers.com/showpost.php?p=63818154&postcount=8
So, what happens now ?
Click to expand...
Click to collapse
That was lollipop... After that it got the marshmallow update.

ahmed.ismael said:
here is the marshmallow signed RUU.zip ( credit to another forum )
https://drive.google.com/file/d/0B7BOa8GJv0vNNklHVWxhRXpZRHc/view?pref=2&pli=1
and here is lollipop RUU.exe ( credit to AndroidRUU ) this is your current firmware you can install this then do OTA to the above or flash the above direct
http://androidruu.com/getdownload.p...09G_20.68.4196.01_F_release_417228_signed.exe
about how to find the correct RUU is by using the details you posted
Click to expand...
Click to collapse
Why there is no Marshmallow EXE RUU... How would I install this zip RUU... Flash how?

Mr_Jack_Frost said:
That was lollipop... After that it got the marshmallow update.
Click to expand...
Click to collapse
I see ... didn't notice the word Marshmallow there as I only focus on your version details.
You can have 3 different methods to install a RUU.zip - https://forum.xda-developers.com/showpost.php?p=67314040&postcount=1749

Mr_Jack_Frost said:
Why there is no Marshmallow EXE RUU
Click to expand...
Click to collapse
htc doesn't release it,we can do nothing about that
Mr_Jack_Frost said:
How would I install this zip RUU... Flash how?
Click to expand...
Click to collapse
i think you got your answer by ckpv5 in the post above mine

ahmed.ismael said:
htc doesn't release it,we can do nothing about that
i think you got your answer by ckpv5 in the post above mine
Click to expand...
Click to collapse
Have you check your PM ?

ckpv5 said:
Have you check your PM ?
Click to expand...
Click to collapse
i'm writing the respond now
edit: already sent

I want international Gsm (401) Ruu stock rom to flash my htc one m9 (nougat 7.0)

I want international Gsm (401) Ruu stock rom to flash my htc one m9 (nougat 7.0)

[email protected] said:
I want international Gsm (401) Ruu stock rom to flash my htc one m9 (nougat 7.0)
Click to expand...
Click to collapse
U should read Flippy 's thread, all u need is there.
https://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Post 5
Remember, ruu's will wipe your phone, so always backup first.
(moderators will move your thread in the questions section as here is developing section)

none of them are suitable for my device , i need 44.28.401.3 version of stock rom (its neither At&t nor verizon , its European version (international gsm) ,i tried every frimware from htc /us/support/downloads of m9 none of them had worked

[email protected] said:
none of them are suitable for my device , i need 44.28.401.3 version of stock rom (its neither At&t nor verizon , its European version (international gsm) ,i tried every frimware from htc /us/support/downloads of m9 none of them had worked
Click to expand...
Click to collapse
There is no 44.28.401.3 issued. Are u sure u have an m9?
There is an 4.28.401.3 :
https://www.androidfilehost.com/?fid=817550096634758268

Fain11 said:
There is no 44.28.401.3 issued. Are u sure u have an m9?
There is an 4.28.401.3 :
https://www.androidfilehost.com/?fid=817550096634758268
Click to expand...
Click to collapse
Sorry for the typo it's 4.28.401.3
Can you please explain me how to install after downloading this rom ?

[email protected] said:
Sorry for the typo it's 4.28.401.3
Can you please explain me how to install after downloading this rom ?
Click to expand...
Click to collapse
That is not a rom. It's a RUU. It will wipe all data from your phone.
The thread I mentioned before has all info needed about flashing RUUs.
Don't flash anything before understand what u do.
Good luck!

Which RUU can I use to get back to stock?
S-ON
fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: xxxxx
(bootloader) version-main: 3.35.401.12
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440792_97.00.51203G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: HTC__032

kbal said:
Which RUU can I use to get back to stock?
Click to expand...
Click to collapse
Please read the ReadMe thread. It will answer your question.

Flippy498 said:
Please read the ReadMe thread. It will answer your question.
Click to expand...
Click to collapse
Well, I did.
you need to use a 3.x RUU for the same SKU and install the 4.x OTA, afterwards.
But it doesn't work.
I'm trying to upgrade to Nougat, but I get red triangle after 25% and I can't find an solution to this problem.

So you still get the triangle after you flashed the correct 3.x RUU? Or is the triangle the reason because of which you want to flash a RUU?
In your last post you asked which RUU to use and that is explained in the RUU section.
Sent from my HTC One M9 using XDA Labs

Flippy498 said:
So you still get the triangle after you flashed the correct 3.x RUU? Or is the triangle the reason because of which you want to flash a RUU?
In your last post you asked which RUU to use and that is explained in the RUU section.
Sent from my HTC One M9 using XDA Labs
Click to expand...
Click to collapse
Triangle is the reason why I want to RUU.
I went 'back to stock' with TWRP backup to update to nougat, but I get stuck at 25%. I'd like to try RUU to see if it makes any difference, but the few I tried won't start to install.
I see a lot of people have problems with updating to nougat and getting stuck at 25%, but seems no one was able to fix this problem. Failing nand? Phone works 100% OK otherwise.

Well, in that case you only need to follow the advices in the ReadMe thread. A RUU should fix the red triangle for the present. However, it won't guarantee that you won't face any nand issues in the future.
Sent from my HTC One M9 using XDA Labs

I managed to RUU and after OTA update to nougat by flashing the RUU rom.zip (renamed to 0PJAIMG.zip from micro-SD) from this post:
https://forum.xda-developers.com/one-m9/help/htc-one-m9-3-35-401-12-ruu-installer-t3318517

Oreo on Australian HTC__039 HTC 10

Hi,
I have an unlocked Australian HTC 10 (CID:HTC_039)
I've been running Viper 10 from Venom ROMs but sadly that's ceased development. So I'd like to switch over to LeeDroid (or even back to stock rom and root) and get the Oreo update. However as far as I can find HTC haven't released an RUU for my device. So I'm thinking perhaps I could use sunshine to s-off, then change my CID (though I'm not totally sure yet how that is done) and use an RUU that way to get the Oreo update - I should then be able to install LeeDroid as well with Oreo I think as the RUU will give me the firmware for Oreo?
I'm concerned that I could loose my cellular and/or Wi-Fi and other radios though? which would be a serious issue... I read about changing radio firmware - do I need to do this and would it break my connections? perhaps change the radio bands it supports?
Thanks for helping out a total noob!

debatingrooster said:
Hi,
I have an unlocked Australian HTC 10 (CID:HTC_039)
I've been running Viper 10 from Venom ROMs but sadly that's ceased development. So I'd like to switch over to LeeDroid (or even back to stock rom and root) and get the Oreo update. However as far as I can find HTC haven't released an RUU for my device. So I'm thinking perhaps I could use sunshine to s-off, then change my CID (though I'm not totally sure yet how that is done) and use an RUU that way to get the Oreo update - I should then be able to install LeeDroid as well with Oreo I think as the RUU will give me the firmware for Oreo?
I'm concerned that I could loose my cellular and/or Wi-Fi and other radios though? which would be a serious issue... I read about changing radio firmware - do I need to do this and would it break my connections? perhaps change the radio bands it supports?
Thanks for helping out a total noob!
Click to expand...
Click to collapse
Hey, there is an RUU available in the AUS thread. I changed my CID from Vodafone aus to WWE. The only thing you lose is VOLTE. Other than that I get good reception and data. Oreo isn't out yet for Australia so it all depends on what your really want to do with your phone. SOFF was well worth the money for me.
Here is a few links for you to read. Let me know if you have an more questions.
AUS RUU
https://forum.xda-developers.com/htc-10/how-to/australia-htc-10-australian-t3393941/page41
De Brand thread. (how to change CID)
https://forum.xda-developers.com/htc-10/how-to/guide-how-to-drand-convert-htc-10-to-t3374593

yldlj said:
Hey, there is an RUU available in the AUS thread. I changed my CID from Vodafone aus to WWE. The only thing you lose is VOLTE. Other than that I get good reception and data. Oreo isn't out yet for Australia so it all depends on what your really want to do with your phone. SOFF was well worth the money for me.
Here is a few links for you to read. Let me know if you have an more questions.
AUS RUU
https://forum.xda-developers.com/htc-10/how-to/australia-htc-10-australian-t3393941/page41
De Brand thread. (how to change CID)
https://forum.xda-developers.com/htc-10/how-to/guide-how-to-drand-convert-htc-10-to-t3374593
Click to expand...
Click to collapse
Thanks for the reply - Can't believe I never found that RUU... In any case I've used sunshine to S-OFF and changed my CID & MID to accept an RUU for US-Unlocked at the moment. But I can't find an oreo RUU where the MID and CID are known so that I can flash it to get the firmware updated and make it compatible with leedroid (based on oreo)
I've also lost cellular connectivity but that happened before I S-OFFed so I hope that's just fixable by formatting everything...

debatingrooster said:
Thanks for the reply - Can't believe I never found that RUU... In any case I've used sunshine to S-OFF and changed my CID & MID to accept an RUU for US-Unlocked at the moment. But I can't find an oreo RUU where the MID and CID are known so that I can flash it to get the firmware updated and make it compatible with leedroid (based on oreo)
I've also lost cellular connectivity but that happened before I S-OFFed so I hope that's just fixable by formatting everything...
Click to expand...
Click to collapse
Download this ruu zip file
https://androidfilehost.com/?w=files&flid=242523
Rename the file to 2PS6IMG.zip
Place on external SD card
Boot to download mode
Press vol up to flash.
After its flashed Turn phone back on make sure everything is working stock. Then flash latest twrp followed by leedroid.

yldlj said:
Download this ruu zip file
https://androidfilehost.com/?w=files&flid=242523
Rename the file to 2PS6IMG.zip
Place on external SD card
Boot to download mode
Press vol up to flash.
After its flashed Turn phone back on make sure everything is working stock. Then flash latest twrp followed by leedroid.
Click to expand...
Click to collapse
Ok I've done that (haven't done TWRP yet) and cellular is back!!
Thanks heaps - Will update here if there's anymore problems!

So for anyone following along behind it all works fine - although the Oreo update is basically uninteresting IMO. Probably staying on Viper 10 Nougat would have been better...

debatingrooster said:
So for anyone following along behind it all works fine - although the Oreo update is basically uninteresting IMO. Probably staying on Viper 10 Nougat would have been better...
Click to expand...
Click to collapse
Once kernel source is released and we get a custom kernel things will be alot better with battery and customizations.

Here's hoping, although I've never used a custom kernel. Any recommendations for customising apps available for HTC 10 Oreo now?
Thanks for all your help

(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) current-slot:
(bootloader) imei: 3542xxxxxxxxxxxx
(bootloader) version-main: 2.42.710.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: VODAP021
Hello i am at the same exact situation with you, being doing a bit of research on how to fix this. this is so far what i learned, flash firmware and flash oreo rom.
currently i am in S-on but i will s-off after i get the whole idea and correct file to do the firmware flashing, the thing is i still not sure how to flash firmware and where to get the correct file, or i have to change my cid and mid to find the matched firmware, mind to guide me in that?

minwater said:
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) current-slot:
(bootloader) imei: 3542xxxxxxxxxxxx
(bootloader) version-main: 2.42.710.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: VODAP021
Hello i am at the same exact situation with you, being doing a bit of research on how to fix this. this is so far what i learned, flash firmware and flash oreo rom.
currently i am in S-on but i will s-off after i get the whole idea and correct file to do the firmware flashing, the thing is i still not sure how to flash firmware and where to get the correct file, or i have to change my cid and mid to find the matched firmware, mind to guide me in that?
Click to expand...
Click to collapse
Hey - so what I did is this:
https://forum.xda-developers.com/showpost.php?p=66750161&postcount=4
But use this firmware instead
https://androidfilehost.com/?fid=818070582850487062
Hope that helps

debatingrooster said:
Hey - so what I did is this:
https://forum.xda-developers.com/showpost.php?p=66750161&postcount=4
But use this firmware instead
https://androidfilehost.com/?fid=818070582850487062
Hope that helps
Click to expand...
Click to collapse
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
---------- Post added at 07:37 AM ---------- Previous post was at 07:36 AM ----------
debatingrooster said:
Hey - so what I did is this:
https://forum.xda-developers.com/showpost.php?p=66750161&postcount=4
But use this firmware instead
https://androidfilehost.com/?fid=818070582850487062
Hope that helps
Click to expand...
Click to collapse
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
what cid and mid i should change to?

minwater said:
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
---------- Post added at 07:37 AM ---------- Previous post was at 07:36 AM ----------
thank for the quick reply!! so if everything run smoothly i could flash oreo custom rom after that?
what cid and mid i should change to?
Click to expand...
Click to collapse
Right now the custom ROMs for the HTC 10 all seem to be based on Nougat firmware - if you follow the steps I gave you you'll end up with oreo firmware - so if you want a custom rom don't follow those steps - just install it now using TWRP (assuming you are running Nougat at the moment)

debatingrooster said:
Right now the custom ROMs for the HTC 10 all seem to be based on Nougat firmware - if you follow the steps I gave you you'll end up with oreo firmware - so if you want a custom rom don't follow those steps - just install it now using TWRP (assuming you are running Nougat at the moment)
Click to expand...
Click to collapse
i updated my phone to Leedroid 5.1 which is base on oreo, got bootloop and i went back to leedroid 4, and problem occur. can i flash to leedroid 5.0 which is oreo based after i flash the firmware? what cid and mid i should change to?
thank you for your help.!

minwater said:
i updated my phone to Leedroid 5.1 which is base on oreo, got bootloop and i went back to leedroid 4, and problem occur. can i flash to leedroid 5.0 which is oreo based after i flash the firmware? what cid and mid i should change to?
thank you for your help.!
Click to expand...
Click to collapse
Yes you can. You need to be on Oreo firmware for his ROM. you need to S off your phone and change CID, I recommend you follow the guide in the link above, debrand to WWE using RUU.zip. Just follow that guide step by step and once you have the phone running take the OTA to Oreo then flash twrp follwed by leedroid ROM
Edit: because you flashed leedroid rom then went back to Nougat you want have baseband but once your running Oreo rom it will return.

yldlj said:
Yes you can. You need to be on Oreo firmware for his ROM. you need to S off your phone and change CID, I recommend you follow the guide in the link above, debrand to WWE using RUU.zip. Just follow that guide step by step and once you have the phone running take the OTA to Oreo then flash twrp follwed by leedroid ROM
Edit: because you flashed leedroid rom then went back to Nougat you want have baseband but once your running Oreo rom it will return.
Click to expand...
Click to collapse
now my phone is rooted, so step by stem is
1. S-off using sunshine
2. change CID and MID to HTC_001 and 2ps620000 (by the guide)
3.Flash RUU
https://androidfilehost.com/?w=files&flid=242523
tell me if the file is correct. there is 2 which one?
4.flash custom recovery again (i am using 3.2.1-2)
5.flash custom rom
let me know if something wrong thank you:angel:

minwater said:
now my phone is rooted, so step by stem is
1. S-off using sunshine
2. change CID and MID to HTC_001 and 2ps620000 (by the guide)
3.Flash RUU
https://androidfilehost.com/?w=files&flid=242523
tell me if the file is correct.
4.flash custom recovery again (i am using 3.2.1-2)
5.flash custom rom
let me know if something wrong thank you:angel:
Click to expand...
Click to collapse
Wrong RUU. there is no RUU for WWE yet and that RUU won't flash unless you have Oreo firmware. So like I said follow the debrand to WWE using RUU.zip. the RUU is posted in that thread all you have to do is follow the Instructions. Once everything is done and you have flashed the RUU boot the phone up (you won't have radio) use Wi-Fi to take the OTA to Oreo. Flash latest twrp because RUU will flash stock recovery then flash leedroid ROM.
So steps would be
1: Obtain S OFF
2: Change CID to HTC__001, MID is the same so don't need to change that.
3: FLASH 2.41.401.41 RUU
4: Take OTA
5: Flash latest twrp, a new twrp was posted yesterday
6: Flash Leedroid.

yldlj said:
Wrong RUU. there is no RUU for WWE yet and that RUU won't flash unless you have Oreo firmware. So like I said follow the debrand to WWE using RUU.zip. the RUU is posted in that thread all you have to do is follow the Instructions. Once everything is done and you have flashed the RUU boot the phone up (you won't have radio) use Wi-Fi to take the OTA to Oreo. Flash latest twrp because RUU will flash stock recovery then flash leedroid ROM.
So steps would be
1: Obtain S OFF
2: Change CID to HTC__001, MID is the same so don't need to change that.
3: FLASH 2.41.401.41 RUU
4: Take OTA
5: Flash latest twrp, a new twrp was posted yesterday
6: Flash Leedroid.
Click to expand...
Click to collapse
thank you! s-off ed, doing the OTA now!! should b alright ad i guess?

minwater said:
thank you! s-off ed, doing the OTA now!! should b alright ad i guess?
Click to expand...
Click to collapse
Should be all good. After OTA boot the phone make sure everyone is working. If you want to after that flash twrp then leedroid. :good:

yldlj said:
Should be all good. After OTA boot the phone make sure everyone is working. If you want to after that flash twrp then leedroid. :good:
Click to expand...
Click to collapse
a question, the main point of s-off is we r able to flash the firmware ourself? but to match the firmware we need the same CID and MID, am i correct?

minwater said:
a question, the main point of s-off is we r able to flash the firmware ourself? but to match the firmware we need the same CID and MID, am i correct?
Click to expand...
Click to collapse
Yes. modified firmwares as well. As you took OTA to Oreo there is no need to flash any firmware.