I have a Moto z play, when I play the audio via Bluetooth speaker the audio suddenly gets transferred to my mobile headset and starts playing via headset even when the Bluetooth speaker is in connected state, I have to disconnect the device and reconnect it inorder to play the audio back on the Bluetooth device, does anyone else have the same issue ? Is this a software glitch or a defect with my headset itself ?
The head set is a Bluetooth headset?? Your device probably recognizes that as a primary Bluetooth source and will connect to that first. Turn off the Bluetooth headset off and that will solve the problem....
coyotefiveoh said:
The head set is a Bluetooth headset?? Your device probably recognizes that as a primary Bluetooth source and will connect to that first. Turn off the Bluetooth headset off and that will solve the problem....
Click to expand...
Click to collapse
Thanks for the replay. It's actually my mobile which starts playing the music instead of my Bluetooth speaker however the speaker is still connected to headset and I can control the audio play,pause and next options from the speaker but the sound comes out of my mobile speaker instead of the Bluetooth speaker the same happens with my Bluetooth headset. I have to disconnect the Bluetooth speaker and reconnect it to play the audio from it.
Related
I have a Jabra BT620s bluetooth wireless stereo headset which I use as an headset and my music headset on the touch hd. I paired them succesfully and playing music with mediaplayer works perfectly.
The problem is when I turn on my Jabra headset. It pairs with my phone fine, but it isnt set as wireless stereo on start. So I have to set it in the bluetooth configuration screen everytime I turn the headset on, cause else the music plays over the speaker of the phone.
Is there anyway to let windows mobile always be forced to set the headset as wireless stereo?
Same problem with Funkwerk EGO Talk
I've have got the same problem with Funkwerk EGO Talk Bluetooth carkit with A2DP. Pairs at the start with Headset Profile, so calling works(except the hangup button btw, ?which redails?? most of the time). But it doesn't start the wireless stereo profile.
I have to "Set as wireless Stereo" everytime i reconnect with the carkit
Anyone has a solution or workaround to start "Set as Wireless Stereo" automaticly or at least in 1 button?
Guys, using the search function would have turned up the following solutions found previously on these forums:
a) use Mortscript to macro the key presses
b) firmware update the headset (i.e. Jabra)
c) try turning on music and bluetooth before the headset - worked for some people
I have the same problem as you, any other suggestions?
I've the same problem with Moto music/blutooth headset
Hmmm
I don't have this problem with my Sony-E HBH BT set. Each time I turn it on the pairing is automatic and get stereo immediately.
I also can have the pocket player or TF3D media player running or not and it will change "on the fly" to BT when I turn on the headset.
No problem here with Motorola S805's.
I turn the phone BT on, turn the headphones on, press play on the headphones and get music.
I have the same problem with my motorola S705
Auto pairing with calls is ok but not with stereo A2DP. I must turn headset on manually in the bluetooth otpions which is quite long and annoying.
Pairing was working good with my TyTN. So there might be a problem somewhere
I've had some problems with my Samsung SBH170 not connecting at all.
I removed them from the BT settings and repaired, now they are found with out problems, allthough not very quickly.
In 'Advanced Configuration Tool 3.3' I came across 'Bluetooth Audio Gateway Service' which was disabeled, I enabled it and rebooted, but it doesn't seem to make any difference on my machine. According to this thread it may be required to enable audio over bluetooth: http://forum.xda-developers.com/showthread.php?t=424424
Regards JD
I done a cold reset as thought this was my software build problem but the problem still remains so must be the bluetooth driver with the HTC touch pro 2/Rhodium
1) connect any mono bluetooth headset
2) under settings, you will see headset option to allow system sounds to go through bluetooth headset, tick this.
3) Now when the headset is in range any system sound will be routed to the bluetooth headset.
3) Run any app that uses the mic (Skype/VOIP/sound recorder)
4) The sound from the device will will be routed fine but you will notice that the mic from the bluetooth headset to device will not sound ok - the speed will be very fast like a robot.
If the bluetooth is making a standard phone call via the phone, it is perfect.
Anyone tried this and discovered this problem - is there a fix?
Anyone confirm this fault on their phone?
Fault when routing bluetooth system sounds
Hello,
I have this same problem again with my HTC Touch Pro 2 (and my bosses 10 months ago)
Anyone has a fix?
Thanks
Thanks to help from one of the members on here my bluetooth is now working fine for making/receiving calls.
However why does the audio from youtube app or tunein radio app not also come through my bluetooth device when paired and connected but instead through my HTC Desire loudspeaker?
Any one got any idea?
I'll try rephrasing the question.
Why doesnt a standard bluetooth in ear headset carry the full audio of my HTC Desire the way a pair of bluetooth headphones probably do and not just phone calls?
Either noone knows or the ones that do aren't seeing this thread.
I have Nokia BH-503 headset and I had the same problem. The calls would go through my headset, but everything else would play on the speaker. I noticed when I went to settings/Wireless & Networks/Bluetooth settings that my headset connects to phone audio, but not media audio.
I did some research and found a solution that works for me. I turn on the headset first, then bluetooth on my phone. Wait for a few seconds and that's that. My headset works perfectly and plays all audio from the device. When I go to settings, it says that the headset is connected to phone and media audio.
Try that and see if it works for you.
I'm only getting the option to use phone audio for some reason. I even tried switching my headset on first as you suggested.
My headset is a Nokia BH-102.
Any other ideas on how to get the media audio connected?
I think my bluetooth headset is just too crap to play media audio.
I am sure this is not specific to the SGS3, but I swear this used to work with my S2.
My 2006 VW doesn't have an AUX input so I use one of the FM Transcievers. It works well.
But...I also use a bluetooth headset while driving.
What I want to happen is to be able to answer calls with my bluetooth headset. Right now while the FM thing is plugged into the headphone jack, the callers voice is sent over the headphone jack and on the stereo. It is as if my bluetooth headset is disabled while the headphone jack is used.
Is there any way to use the headphones to listen to music, but use the bluetooth headset for calls?
BTW, I am using PowerAmp.
Have you tried changing the order in which you connect the 2 devices. Try making sure you connect the transmitter before connecting the bluetooth headset. You may also need to edit the properties of the bluetooth headset and disable a2dp to prevent music from going to the headset. If all else fails, there should be a button during a call that you can use to switch between bluetooth, speakerphone, handset. Not ideal while driving, though.
One thing Android needs is a proper mixer control panel...
tmagritte said:
Have you tried changing the order in which you connect the 2 devices. Try making sure you connect the transmitter before connecting the bluetooth headset. You may also need to edit the properties of the bluetooth headset and disable a2dp to prevent music from going to the headset. If all else fails, there should be a button during a call that you can use to switch between bluetooth, speakerphone, handset. Not ideal while driving, though.
One thing Android needs is a proper mixer control panel...
Click to expand...
Click to collapse
Actually the Headset button is lit up on the in call screen, as if the bluetooth headset is connected for the call. Unfortunately it is still routing through the headset/handset mic.
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
jalanjkcarp said:
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
Click to expand...
Click to collapse
I'm looking for the same thing. I can get audio through Bluetooth and have notifications go to speaker at the same time, but I can't get other media to go to speaker at the same time.
I would also be satisfied with a widget that lets me toggle the A2DP status of the Bluetooth connection on and off. It would not be the end of the world if I needed to toggle the A2DP off when I switch to another radio source and toggle back on when I go back to Bluetooth as the source in the car.
Sent from my Samsung Galaxy Note 2 using Tapatalk.
A2DP + phone speaker simultaneously
jalanjkcarp said:
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
Click to expand...
Click to collapse
If you ask me I'd say it's possible.Whenever my phone is connected to my stereo through A2DP, the music is played through loudspeakers only by default. However, when there's an incoming call and my ringtone is being played I can hear it through loudspeakers AND the phone speaker, which creates a pretty cool surround effect. I'd really love to make my music player interact with all the speakers like this all the time. I took my chance installing various apps like SoundAbout to help me figure it out, all to no avail. Any ideas?