I am sure this is not specific to the SGS3, but I swear this used to work with my S2.
My 2006 VW doesn't have an AUX input so I use one of the FM Transcievers. It works well.
But...I also use a bluetooth headset while driving.
What I want to happen is to be able to answer calls with my bluetooth headset. Right now while the FM thing is plugged into the headphone jack, the callers voice is sent over the headphone jack and on the stereo. It is as if my bluetooth headset is disabled while the headphone jack is used.
Is there any way to use the headphones to listen to music, but use the bluetooth headset for calls?
BTW, I am using PowerAmp.
Have you tried changing the order in which you connect the 2 devices. Try making sure you connect the transmitter before connecting the bluetooth headset. You may also need to edit the properties of the bluetooth headset and disable a2dp to prevent music from going to the headset. If all else fails, there should be a button during a call that you can use to switch between bluetooth, speakerphone, handset. Not ideal while driving, though.
One thing Android needs is a proper mixer control panel...
tmagritte said:
Have you tried changing the order in which you connect the 2 devices. Try making sure you connect the transmitter before connecting the bluetooth headset. You may also need to edit the properties of the bluetooth headset and disable a2dp to prevent music from going to the headset. If all else fails, there should be a button during a call that you can use to switch between bluetooth, speakerphone, handset. Not ideal while driving, though.
One thing Android needs is a proper mixer control panel...
Click to expand...
Click to collapse
Actually the Headset button is lit up on the in call screen, as if the bluetooth headset is connected for the call. Unfortunately it is still routing through the headset/handset mic.
Related
is there possibility to use cable headset like BT headset with AVRCP?
BT stereo headset are too big and not cheap.
I would like to control mediaplayer from headset
I do not need A2DP because I need only to listen audiobook, not music, so quality isn't so important.
Mono BT headset (I have jabra130) doesn't work with audio streaming on my Himalaya, and they doesn't support AVRCP profile.
any idea?
AVRCP is a bluetooth profile. If your headset is not bluetooth then it will not have AVRCP.
maybe something similair?
Marx2 said:
maybe something similair?
Click to expand...
Click to collapse
haven't met with any solution so far.. simply these devices haven't anything to control with excpept the radio waves.. it has only jack/etc. with these you cannot control anything.
Some headphones has an additional button which can be used to answer talk. Jack connection has additional place to use it. is it possible to catch pushing this button programmatically?
Hi all,
Have any of the Hermes Guru's out there worked out if Bluetooth and USB headsets can be used at the same time.
What I am trying to achieve is for the phone sound - ie incomming calls etc to be routed to the bluetooth pairing and for the other sounds, such as my gps, music and other sounds to continue to be routed via the mini USB port, either for headphones or lineout.
Is this possible? Would this be a registry setting? Is all sound handled in the same way, or is it possible to determine the phone sounds against all others.
Thanks in advance
Adam
does anyone have any ideas?
When in my car, I have the usb port plugged in to a 3.5 adapter and into my car stereo. I also have a BT headset turned on and on my ear. While listening to MP3s, if the phone rings, the mp3 player on the phone stops playing and it displayes the caller ID. If I push the button on the headset, I get the phone call on the BT. When I am done, the mp3 starts again through the usb.
thanks
Awesome yatrg, that was exactly what im trying to do. I can buy an aux input for my car and run it off the mini-usb to 3.5mm adaptor and can also get a parrot bluetooth to handle the phone call.
Cheers mate
Adam
in my tp2 i noticed that when i have a wired or bluethooth headset conected and someone calls me it only rings in the headphones! this made me lose several phone calls.
in other devices i had , i used a reg hack for it to ring in the device speaker and headphone,so i tried in my tp2 but it does not work as the reg hack is related to the microsoft bluethooth stack.
therefore i m asking for help and also if other tp2 users can confirm this issue.
my bt heaset is a jabra bt3030.
thanks
I am having the same problem with my TP2, the headset becomes useless for this reason.
I use a Sennheiser MM-200 headset, bought this headset not to have earphones plugged in ears all time but only when i have incoming call.
Not sure what to tell you about the wired headset, but is your BT using the normal headset BT profile or is it connecting also with A2DP/Stero BT? That could be part of the problem.
In the Bluetooth menu it is connected with: "Stereo Audio" and "Hands-free"
you can switch off the stereo audio function and stay with the hans-free function only. it works fine, but you have to do it manually.
wolfgang
I made a soft reset and now the phone rings even with stereo audio enabled - whats good for me, but i do not understand why
Hi Faria,
There is a setting in the BT config to transfer "ALL" system sounds to the connected audio device, this may be your issue. I don't use a wired but my Rhodium rings in the headset and on the device after removing this option.
Cheers,
Beasty
I really hate this feature too. I am used to listening to music on my BT hedset. So when I get home I would just take them off, put the phone on my desk and go about my business. But if I don't disconnect the headset now I won't notice it ringing... which can lose in lost phone calls.
Hopefully someone will find a workaround.
Start>Settings>Connections>Bluetooth
First tab (gears)>Advanced>Audio
"Play system sounds on remote hands-free device" = uncheck
Just tested and works for me.
I get the normal ringtone from the phone and the regular "beep" from the stereo headset.
FYI, this is basically the same information as listed two posts up...
On my old phone if my headset was in and my phone rang it would say call from and state the persons name through my headset. The ringer itself wouldn't play through my headset nor the phone. And now I can't remember but I know it beeps in my ear but I think the phone plays the actual ringer also at the same time. But if I checkmark what you guys are unchecking will the actual ringer play through my plantronics bt headset and not on the phone.. I kind of would like that for if I am out and dont' want my phone to ring all loud I would rather the ringer play in my ear and was wondering if that's what happens when I check that. Mine was unchecked when I got the phone.. I don't havea bt headset I use for music just talking mostly when driving..
Is there any sort of app that can redirect phone calls through a2dp. I can get a gadget that will allow me to contorol my media player and stream music over bt to an iphone dock but I also need to calls to come throuhg those speaker. A microphone isnt a problem as the phone has one that will work fine. What I need to do is have phone calls,if an a2dp device is present and connected use that instead of the phones speaker. Otherwise I have to go buy a BT radio for my car. (which comes with an ipod dock but no bt)
you might could just use an auxiliary input to get just the audio out. Pretty sure you can't use a2dp for phone calls.
Sent from my PC36100 using XDA App
If the BT device has the headset profile you should be able to receive calls on it, many BT enabled car stereos and BT headphones are able to carry A2DP, AVCR and the headset profile.
I want the same for my Blackberry A2DP gateway in car
I have a blacberry A2DP gateway in my car that connects ipads, htc phone and iphone to the stereo input of my car sound system. The sound quality is excellent for all uses but the incoming phone calls are routed via the phone internal speaker unless I plug a second stereo cable into the car input jack.
Can I get htc hd2 windows mobile 6.5 phone mono into this gateway device to avoid having to connect a stereo cable to my phone output? It connects to the HTC as stereo audio only.
fenixjn said:
If the BT device has the headset profile you should be able to receive calls on it, many BT enabled car stereos and BT headphones are able to carry A2DP, AVCR and the headset profile.
Click to expand...
Click to collapse
So in other words,the answer is no,there IS no such app. As I said,I can buy a gadget that will connect A2DP to a I-Pod interface. It does NOT have headset profile.
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
jalanjkcarp said:
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
Click to expand...
Click to collapse
I'm looking for the same thing. I can get audio through Bluetooth and have notifications go to speaker at the same time, but I can't get other media to go to speaker at the same time.
I would also be satisfied with a widget that lets me toggle the A2DP status of the Bluetooth connection on and off. It would not be the end of the world if I needed to toggle the A2DP off when I switch to another radio source and toggle back on when I go back to Bluetooth as the source in the car.
Sent from my Samsung Galaxy Note 2 using Tapatalk.
A2DP + phone speaker simultaneously
jalanjkcarp said:
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
Click to expand...
Click to collapse
If you ask me I'd say it's possible.Whenever my phone is connected to my stereo through A2DP, the music is played through loudspeakers only by default. However, when there's an incoming call and my ringtone is being played I can hear it through loudspeakers AND the phone speaker, which creates a pretty cool surround effect. I'd really love to make my music player interact with all the speakers like this all the time. I took my chance installing various apps like SoundAbout to help me figure it out, all to no avail. Any ideas?