I have a Jabra BT620s bluetooth wireless stereo headset which I use as an headset and my music headset on the touch hd. I paired them succesfully and playing music with mediaplayer works perfectly.
The problem is when I turn on my Jabra headset. It pairs with my phone fine, but it isnt set as wireless stereo on start. So I have to set it in the bluetooth configuration screen everytime I turn the headset on, cause else the music plays over the speaker of the phone.
Is there anyway to let windows mobile always be forced to set the headset as wireless stereo?
Same problem with Funkwerk EGO Talk
I've have got the same problem with Funkwerk EGO Talk Bluetooth carkit with A2DP. Pairs at the start with Headset Profile, so calling works(except the hangup button btw, ?which redails?? most of the time). But it doesn't start the wireless stereo profile.
I have to "Set as wireless Stereo" everytime i reconnect with the carkit
Anyone has a solution or workaround to start "Set as Wireless Stereo" automaticly or at least in 1 button?
Guys, using the search function would have turned up the following solutions found previously on these forums:
a) use Mortscript to macro the key presses
b) firmware update the headset (i.e. Jabra)
c) try turning on music and bluetooth before the headset - worked for some people
I have the same problem as you, any other suggestions?
I've the same problem with Moto music/blutooth headset
Hmmm
I don't have this problem with my Sony-E HBH BT set. Each time I turn it on the pairing is automatic and get stereo immediately.
I also can have the pocket player or TF3D media player running or not and it will change "on the fly" to BT when I turn on the headset.
No problem here with Motorola S805's.
I turn the phone BT on, turn the headphones on, press play on the headphones and get music.
I have the same problem with my motorola S705
Auto pairing with calls is ok but not with stereo A2DP. I must turn headset on manually in the bluetooth otpions which is quite long and annoying.
Pairing was working good with my TyTN. So there might be a problem somewhere
I've had some problems with my Samsung SBH170 not connecting at all.
I removed them from the BT settings and repaired, now they are found with out problems, allthough not very quickly.
In 'Advanced Configuration Tool 3.3' I came across 'Bluetooth Audio Gateway Service' which was disabeled, I enabled it and rebooted, but it doesn't seem to make any difference on my machine. According to this thread it may be required to enable audio over bluetooth: http://forum.xda-developers.com/showthread.php?t=424424
Regards JD
Related
I've recently acquired one of these headsets and have managed 2 pair it with my O2 XDA II mini. However, i am unable to stream music to the headset but am able to answer calls and make them too. Does anyone know how i could stream music from my phone to my headset?
if you check in the forum for your pda, i believe you will find you have to upgrade your bluetooth software?
then you will find new menu's in the bluetooth settings including audio/audio streaming.
have the headphones, and am very pleased
already have da software
Hey, i already have the software but the thing is nothing appears in the box labelled "default headset" even after i have paired the device with my XDA. And whenever i try 2 stream music, it initially says connecting but eventually the connection fails and the music does not stream to my headset. Does anyone know how i can get the headset to appear in the default headset drop down box?
when you paired the h/set & phone, what choices did you get?
When I turn my headphones on, my handsfree part pairs but my stereo part won't pair automatically, usually. I just connect it manually, but sometimes it won't just connect so I have to disconnect the handsfree part before I connect the stereo part then reconnect the handsfree part. Occassionally, I have to repeat more than once.
Pair it to the device you want stereo from, start the default "Headset" system for normal talking, press the left multifunction to terminate the connection to the "headset" profile, then press the right multifunction button to trigger the "stereo headset" profile to start.
Or, try to force it after pairing and then press the rightmultifunction to accept the connection and have the device bind that call to that function, enabling and disabling the stereo data.
I had to do the first part with my new HP iPAQ hx2495 to get the stereo headset profile going when i installed the headset as both stereo and regular.
I finally got my HT820 working
I have a T-mobile US MDA.
I first upgraded to ROM 2.24 which supports A2DP, which is what the headset uses for sound other than the phone. (When you flash your ROM it intalls all new boot up software so it changes your hard-reset process, and you lose your support.) Then I paired. You should see the services the headset offers, handsfree and stereo. There's also a menu available when you hold-slelect the name of the BT device in the device list that's handy.
I did discover that it is a headset problem if the sound skips out irratically averaging about 20 seconds. There was a bad batch sent out to/from Hong Kong. Motorola is replacing mine, but I had to pay to ship it to them.
Hope this helps!
I don't want to hijack your thread but I don't know where else to turn. I have requested help elswhere on this forum for my problem but I can't seem to get any help.
I have a ht820 and a cingular 8125. I've been able to pair the headset with my phone but, when I try to play a mp3, the voice speed dial comes up, the mp3 plays for about 3 seconds, then the mp3 audio reverts back to the phone.
Do I have to flash to a different rom, do I have to tweak registry settings? I don't really have a clue what I should do. Please help.
Porter
Edit: I've solved my problem. See this thread for my fix.
http://forum.xda-developers.com/viewtopic.php?t=58192&highlight=
Thanks
Actually what it sounds like is the phone is only connecting to the headset for that time under the premise of a voice dial with the headset profile. I think you're lucky enough that you can get it to play for those 3 seconds. I have a Sony Ericcson w810i and I can't even get any audio from it to the headset at all without using the w810i's 3.5mm adapter to the patch cable on the headphones which just looks weird. But you might want to do a search for your model phone like this, "Cingular 8125 Motorola HT820" and see what kinda results you get.
A2DP Blueooth Car Stereo won't reconnect to mobile
I have the Pioneer DEH-P9800BT Bluetooth Head Unit in my car, which supports stereo BT music streaming from any A2DP device.
I also have the HTC TyTN II Mobile which supports the same.
I have paired the two devices, and on the initial pairing successfully played music from the HTC through the Pioneer. When that worked, the BT Audio icon appears in the title bar of the mobile (headphones with a musical note in the middle).
However, after switching off the car and later returning, I have 2 issues:
1) It is impossible to reconnect the BT stereo music playback, unless I delete the Pioneer device from the list of BT devices within the mobile phone, then pair them again. Nothing else seems to work. Simply, I just want all music to be routed through the Pioneer whenever it is in range of the mobile.
2) I have set the mobile phone as "Phone 1" in the Pioneer, and have enabled "Auto Connect", yet it does not auto connect. Every time I get in the car I have to manually scroll to Telephone>Function>Connect Phone>Phone 1. You can imagine what a laborious pain that is compared to my previous 5 year old Nokia Bluetooth Car Kit which just auto-connects whenever my mobile is in range.
Are you able to solve either problem?
Im having the same problems with my sony DR-BT10CX and Moto HT820 whenever i turned either devices off. But whenever i turned them back on, i usually uncheck and recheck the headset whenever i want to use A2DP. It's a pain but i never had to re-pair my device with my tilt.
Try unchecking/checking the bluetooth device instead of re-pairing them (although in your case, its a PITA).
Have you tried updating the firmware on the Pioneer (if its possible anyways).
I have an ATT Tilt w/ the my customized HTC rom. But my JVC BT1 never has any problem to reconnect to my phone.
1) I found a program called A2DPToggle which provides an on/off button on the home page to solve this
2) I found I have to leave the phone in 'visible' Bluetooth mode for auto-connect to work. Less secure, but solves the problem
While this may not help, while messing with my Audio linking between my pda and pc , The PC BT adaptor would freeze if I tried to stream an AAC file or a non mp3 file. It would play it for 10-15 seconds then freeze. I imagine not all mp3
s are created equal for BT purposes either.
I'm using a bluetooth 2.0 stereo headset with my HTC Herald. The problem is that when you press the function key on the headset for a second, it automatically calls the last number dialed. Is there a registry setting or something that can disable this feature in order to prevent making accidental calls?
Also, each time the headset connects, it doesn't automatically set as wireless stereo. I have tried the A2DP Toggle today screen plugin. Although it works, I'm still looking for a way to map the function to a hardware key, without taking up space on the today screen. Any help would be appreciated.
Which headset are you using?
I'm using a Clip II Mini. It's the one they sell on eBay that looks like a 2nd gen iPod Shuffle, and has a 3.5mm stereo jack. With my previous BT 1.2 headset, all I had to do was click one of the controls to activate wireless stereo mode.
BT headset help
I too have a BT headset (Jabra BT135) and only the handsfree profile comes up on the BT menu .. the " set as wireless stereo" is faded out (see attachment) and I can only use it for receiving and speaking on the phone but not for listening to music from wmp... pl help
Thanks
farhanehmudkader said:
I too have a BT headset (Jabra BT135) and only the handsfree profile comes up on the BT menu .. the " set as wireless stereo" is faded out (see attachment) and I can only use it for receiving and speaking on the phone but not for listening to music from wmp... pl help
Thanks
Click to expand...
Click to collapse
'cause it only supports HFP and not AD2P (wireless stereo).
It even say on the Jabra BT135 site.
Try using the latest beta of BatteryStatus and the tray icon to manager the bluetooth functions. Solved all my problems. It makes it a 1 click operation. Just toggle A2DP and it automatically turns on Bluetooth and activates the "Stereo Headset" profile for my headset device.
BatterStatus Extended V. 1.05 Beta nightly build
Thread I used to discuss my issue
As for the auto dialing I haven't encountered it since installing and using the
A2DP toggle on BatteryStatus. Only conflicts I encounter are when I use Audio Manager and WMP and forget to close the process on 1 which is my own fault.
Good Luck
First of all, I would like to says big thank to all rom cooker. You all did a very great roms. However, I still have a little problem that annoy me a lot...
I had connected the stero bluetooth headset with Hermes and choose both "Wireless Stero" and "Headset" profiles in bluetooth setting.
Then when there is incomming call, the Hermes will not ring. So I had a lot of miss calls.
However, if I disable the "Wireless Stero" profile in bluetooth setting, the Hermes will ring normally.
I used to use the Prophet before and there is no problem. The Prophet will ring normally although I choose both profiles.
The stero bluetooth headset is the same, iTech Clip Radio.
I had tried on many roms and found the same problem. So I guess that maybe I have to modify the registry setting to enable ringing on "Wireless Stero" profiles. Can somebody help me to solve the problem please???
I have the same issue and assumed that's how it worked since I just got this Jabra BT8040 that supports wireless stereo. It would only ring through my headset when wireless stero was enabled. If there is a way to get the phone to ring also that would be great. Right now I do the same thing as you, disable the wireless stereo until I need to use it.
My guess is this is by design since all sound is routed to stereo headset then so would the ringer. This isn't an issue for me since the Jabra BT8010 I can turn on/off stereo by simply pressing a button on the headset.
Sorry don't know of a solution.
Thinking about it I guess you could use something like mortscript and make a button that turns stereo pairing on/off to make it simpler I dunno.
I have similar issues with the PAYS rom, when listening to music via my BT earpice (Jabra) where you click the answer button on the earpice it then takes the music from the device and plays it through the jabra ONLY for about 5 seconds and then defaults back to the device?
Any suggestions would be appreciated?
in my tp2 i noticed that when i have a wired or bluethooth headset conected and someone calls me it only rings in the headphones! this made me lose several phone calls.
in other devices i had , i used a reg hack for it to ring in the device speaker and headphone,so i tried in my tp2 but it does not work as the reg hack is related to the microsoft bluethooth stack.
therefore i m asking for help and also if other tp2 users can confirm this issue.
my bt heaset is a jabra bt3030.
thanks
I am having the same problem with my TP2, the headset becomes useless for this reason.
I use a Sennheiser MM-200 headset, bought this headset not to have earphones plugged in ears all time but only when i have incoming call.
Not sure what to tell you about the wired headset, but is your BT using the normal headset BT profile or is it connecting also with A2DP/Stero BT? That could be part of the problem.
In the Bluetooth menu it is connected with: "Stereo Audio" and "Hands-free"
you can switch off the stereo audio function and stay with the hans-free function only. it works fine, but you have to do it manually.
wolfgang
I made a soft reset and now the phone rings even with stereo audio enabled - whats good for me, but i do not understand why
Hi Faria,
There is a setting in the BT config to transfer "ALL" system sounds to the connected audio device, this may be your issue. I don't use a wired but my Rhodium rings in the headset and on the device after removing this option.
Cheers,
Beasty
I really hate this feature too. I am used to listening to music on my BT hedset. So when I get home I would just take them off, put the phone on my desk and go about my business. But if I don't disconnect the headset now I won't notice it ringing... which can lose in lost phone calls.
Hopefully someone will find a workaround.
Start>Settings>Connections>Bluetooth
First tab (gears)>Advanced>Audio
"Play system sounds on remote hands-free device" = uncheck
Just tested and works for me.
I get the normal ringtone from the phone and the regular "beep" from the stereo headset.
FYI, this is basically the same information as listed two posts up...
On my old phone if my headset was in and my phone rang it would say call from and state the persons name through my headset. The ringer itself wouldn't play through my headset nor the phone. And now I can't remember but I know it beeps in my ear but I think the phone plays the actual ringer also at the same time. But if I checkmark what you guys are unchecking will the actual ringer play through my plantronics bt headset and not on the phone.. I kind of would like that for if I am out and dont' want my phone to ring all loud I would rather the ringer play in my ear and was wondering if that's what happens when I check that. Mine was unchecked when I got the phone.. I don't havea bt headset I use for music just talking mostly when driving..