Develop Bugs

[Q] i broke my m8 stuck i logo and 4 triangle any advice ?! help

i try ro flash gpe ruu and it dos not run it is broke my mobile
i change cid to 1111111 not work
is any one can advise
C:\Users\m.banamah\Desktop\New folder\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.36.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT529WM00523
(bootloader) imei: 358705060044932
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B67000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 56f9ae32
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.141s​

iioodii said:
i try ro flash gpe ruu and it dos not run it is broke my mobile
i change cid to 1111111 not work
is any one can advise
C:\Users\m.banamah\Desktop\New folder\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.36.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT529WM00523
(bootloader) imei: 358705060044932
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B67000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 56f9ae32
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.141s​
Click to expand...
Click to collapse
fastboot oem rebootRUU
then you need to run the command twice fastboot flash zip RUU-HTC_One_M8_GPE_5.1-4.04.1700.4.zip
my bad and u need to change your mid inbox me

not working
C:\Users\m.banamah\Desktop\New folder\adb> fastboot flash zip RUU-HTC_One_M8_GPE
_5.1-4.04.1700.4.zip
target reported max download size of 1826418688 bytes
sending 'zip' (655035 KB)...
OKAY [ 29.719s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 30.298s

iioodii said:
not working
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
Click to expand...
Click to collapse
There's your answer right there. You need to change MID to one that is supported by the GPE RUU. Looks like you've already changed your CID to one that works with the GPE RUU. But you need to change CID and MID.

OK I will try

iioodii said:
OK I will try
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2708581
thats how to change your mid since you have no rom i guess, you can flash the latest version of twrp and boot into it and once in it you can put the commands in

i try to change it from this http://forum.xda-developers.com/showthread.php?t =2733850
but my mainver: 2.04.605.2 not listed
also adb commands not working . only fastboot command working .
and i try to flash custom recovery it's flashed but i can not inter it
any suggesting gays

toysoldierq said:
http://forum.xda-developers.com/showthread.php?t=2708581
thats how to change your mid since you have no rom i guess, you can flash the latest version of twrp and boot into it and once in it you can put the commands in
Click to expand...
Click to collapse
Adb command not work

iioodii said:
Adb command not work
Click to expand...
Click to collapse
adb commands dont work in fastboot mode, you need to flash the latest version of twrp boot into it and then use the adb commands if your unsure of what to do and dont want to furher damage your phone i can help you over teamviewer, changing your mid is risky if your not sure and can damage your device badly any wrong mistake and its game over.

iioodii said:
i try to change it from this http://forum.xda-developers.com/showthread.php?t =2733850
but my mainver: 2.04.605.2 not listed
Click to expand...
Click to collapse
The link is for flashing a new splash screen. Don't know why you are linking or trying to follow this.
iioodii said:
and i try to flash custom recovery it's flashed but i can not inter it
Click to expand...
Click to collapse
adb commands will only work while booted in OS or custom recovery. That is what the previous post (Post #6 above) was talking about.
iioodii said:
and i try to flash custom recovery it's flashed but i can not inter it
Click to expand...
Click to collapse
The photo in your first post indicates your bootloader is relocked. Did you unlock it again?
If its still relocked, custom recovery will never flash properly.

redpoint73 said:
The link is for flashing a new splash screen. Don't know why you are linking or trying to follow this.
adb commands will only work while booted in OS or custom recovery. That is what the previous post (Post #6 above) was talking about.
The photo in your first post indicates your bootloader is relocked. Did you unlock it again?
If its still relocked, custom recovery will never flash properly.
Click to expand...
Click to collapse
i fix the problem over teamviewer red point, what i did was edit the model id in the zip from the google play stock rooted rom to match his and flash it, then unlock his bootloader with adb and change both mid and cid to google play, his phone was stuck at the htc logo black screen that fix it.

HTC one m8 stuck on hboot screen with the only option as RUU, help please

I was trying to flash a recovery RUU Zip file using Hasoon2000 all in one Toolkit and it failed. Does anyone know how to fix this?

username8900 said:
I was trying to flash a recovery RUU Zip file using Hasoon2000 all in one Toolkit and it failed. Does anyone know how to fix this?
Click to expand...
Click to collapse
What version is your phone? Do you have a full RUU to flash? Why did you use a toolkit instead of manual install? What recovery for what version of the phone did you try to install? Can you open a command window and use the command "fastboot getvar all" to give us some details on your phone model? be sure to delete the IMEI/serial before pasting the output here.

username8900 said:
I was trying to flash a recovery RUU Zip file using Hasoon2000 all in one Toolkit and it failed. Does anyone know how to fix this?
Click to expand...
Click to collapse
Agree with the previous response that we need more info.
Namely, getvar data, so we can see the version (CID, MID) of the phone, current firmware, etc. As well as what RUU file (exact name, source).
Also, any error messages or what wre the exact results of trying to run the RUU?
I also agree that flashing an RUU zip (or just about anything) thru a toolkit is a bad idea. Flashing manually is not any more complicated (at least, not by any significant degree) and a toolkit just constitutes an unnecessary middle man, that I've often seen cause problems in itself. Biggest reason for this, is that the toolkit hasn't been update in over a year (going on 2 years!) and its outdated components cause many issues on even remotely current software/firmware.

I have same problem please someone help me its request
As i was flashing zip through hboot but i was working fine than message pop up - wrong zip file-
i changed my MID before flashing 0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed
this rom as my phone was unlocked from USA now it is stuck at hboot screen. now i have this
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: b:
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.063s
PLEASE HELP ME I FED UP TOTALLY TIRED

karamghumaan said:
As i was flashing zip through hboot but i was working fine than message pop up - wrong zip file-
i changed my MID before flashing 0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed
this rom as my phone was unlocked from USA now it is stuck at hboot screen.
now i have this
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: b:
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.063s
PLEASE HELP ME I FED UP TOTALLY TIRED
Click to expand...
Click to collapse
How can it be same problem as OP ? Your problem is installed wrong ROM for your device variant.
You asked where to find your correct firmware and I linked to you to correct section for your device variant
http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-unable-to-correct-firmware-t3446792
But .. now you installed a GSM RUU on CDMA device... the biggest mistake.
Change back MID to original then install Sprint RUU. If you're lucky enough, Sprint RUU will unbricked your M8.

ckpv5 said:
How can it be same problem as OP ? Your problem is installed wrong ROM for your device variant.
You asked where to find your correct firmware and I linked to you to correct section for your device variant
http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-unable-to-correct-firmware-t3446792
But .. now you installed a GSM RUU on CDMA device... the biggest mistake.
Change back MID to original then install Sprint RUU. If you're lucky enough, Sprint RUU will unbricked your M8.
Click to expand...
Click to collapse
Oh god thanks for your reply
you mean to say may phone is CDMA but i was able to choose any carrier before AND NOW THE MOST BIGGEST PROBLEM IS THAT my stuck at HBOOT i really don't know how change MID in fastboot option PLEASE HELP ME to get back to ORIGINAL MID

Hi is there anyone who can show me a path to solve my above mentioned problem. FOR GOD SAKE PLEASE HELP ME GUYS.

karamghumaan said:
Hi is there anyone who can show me a path to solve my above mentioned problem. FOR GOD SAKE PLEASE HELP ME GUYS.
Click to expand...
Click to collapse
Post your problem in your own thread that I mention above then I'll help you.
This thread nothing to do with your problem

Post your problem in your own thread that I mention above then I'll help you.
This thread nothing to do with your problem
ok thanks please answer that quickly

karamghumaan said:
you mean to say may phone is CDMA but i was able to choose any carrier before
Click to expand...
Click to collapse
Your phone is the CDMA version M8, that is a fact. Choosing other carriers has nothing to do with it. Being the CDMA version M8 means it supports CDMA, in addition to some GSM and HSPA bands. Its intended for use in the US with the Sprint network, and will give you limited results elsewhere. Really, its the worst M8 version to buy; and I wouldn't recommend it to any international (non-US Sprint) users.

Help me, please

Hello!
I have m8_whl phone. I am change mid and install 1.54.1540.10 ruu, but it's getting error. And i don't install any ruu to my phone. Please, help me.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.00
(bootloader) version-baseband: 1.09.20.011
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.30.651.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT44TSF01021
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

you shouldn't do that ,instead download ruu' listed here,this is for m8_whl -
http://forum.xda-developers.com/showthread.php?t=2729173

Knightofrepublic said:
you shouldn't do that ,instead download ruu' listed here,this is for m8_whl -
http://forum.xda-developers.com/showthread.php?t=2729173
Click to expand...
Click to collapse
I don't find. Please, you paste link here.

all of the ruu's are for your phone , you can install what you want from this link
http://forum.xda-developers.com/showthread.php?t=2729173

A direct link for marshmallow is this-
http://dl3.htc.com/application/RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_6.20.651.3.exe

I have try this ruu now. If don't change anything, I write.

Knightofrepublic said:
A direct link for marshmallow is this-
http://dl3.htc.com/application/RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_6.20.651.3.exe
Click to expand...
Click to collapse
I can't install any ruu. Each ruu has get error 155.

try again with relocking the boot-loader,see if it helps,sone people had this issue qnd relocking bootloader did the trick for them

Knightofrepublic said:
try again with relocking the boot-loader,see if it helps,sone people had this issue qnd relocking bootloader did the trick for them
Click to expand...
Click to collapse
It don't help. I try relock bootloader, but nothing happen. Ruu get error 155. I don't enter the recovery twrp.

Tural313 said:
It don't help. I try relock bootloader, but nothing happen. Ruu get error 155. I don't enter the recovery twrp.
Click to expand...
Click to collapse
Relock bootloader won't do any good for you. S-Off doesn't need a relocked bootloader to install 6.20.651.3 RUU.
Step 1 : install 6.20.651.3 firmware
Step 2 : install 6.20.651.3 RUU
You can get those on the same link in post #2 & #4

When ruu&fuu start, it write sending.... and nothing happen :/

Tural313 said:
When ruu&fuu start, it write sending.... and nothing happen :/
Click to expand...
Click to collapse
You need to flash firmware first then after it success run the RUU
Sent from my HTC One M8 using XDA Labs

Thanks all! I flash firmware, then run ruu, it success.

help HTC one m8 cid:eek:RANG001 version-main: empty

hey guys i need help i buyed an HTC one m8 and i found in it a custume rom ( candy5 ) i would to get back the stock one i read in a thread that i must see the firmware version but i dont have one it's empty !!! what should i do help me plz
PS: i'm S-ON :crying:

what i get
all: Done!
that's what i get guys

walidbenzii said:
all: Done!
that's what i get guys
Click to expand...
Click to collapse
to identify the firmware number you can search by cid & mid
post getvar all result after removing serialno and imei
me or someone else will help you find your firmware

walidbenzii said:
all: Done!
that's what i get guys
Click to expand...
Click to collapse
Post the whole getvar output, minus IMEI and serial number.

redpoint73 said:
Post the whole getvar output, minus IMEI and serial number.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Hi this is my M8...i want to get back to stock too via twrp
what is my version-main? or suitable backup to download
Thaanks in advance

Your main version is 4.19.61.2 or 4.19.61.3. This is based on your MID/CID and the radio baseband number (I just happen to know form experience that the radio number corresponds to 4.xx main version).
Its probably okay to restore the TWRP backup for the latter (4.19.61.3). Then restore stock recovery 4.19.61.3 and OTA to Marshmallow (assume that is what you want - most folks want to be updated to the more current Android version).
You should also update to TWRP 2.8.7, if it has an older TWRP installed (which is usually how main version gets wiped out - known bug on older TWRP builds).
Alternately, you can relock bootloader, flash signed firmware 6.12.61.4 using the file and instruction in Post #5 of the stock TWRP collection: http://forum.xda-developers.com/showpost.php?p=60218734&postcount=5
Then unlock bootloader again, flash TWRP back on the phone, and restore TWRP backup 6.12.61.4

[SOLVED] Help . HTC M8 lost audio capabilities after flashing rom

Guys pls I need help.
I lost sound on my phone after flashing a nougat based rom.
I can't even record video with camera. Anything related to audio is lost.
I've returned back to marshmallow but the issue is still there. Pls any help would be appreciated.
I have S-OFF and unlocked bootloader
edited: I fixed it thanks to ckpv5 and miffymiffy
I reverted to a sens based rom
and then i flashed his adsp
*warning this is for verizon only.
for other gsm m8,
check it out here
http://forum.xda-developers.com/showpost.php?p=68306013&postcount=31220

Have you fix it ?
What's your firmware no. ?
Maybe I have it, I can make a adsp flashable zip for you.

ckpv5 said:
Have you fix it ?
What's your firmware no. ?
Maybe I have it, I can make a adsp flashable zip for you.
Click to expand...
Click to collapse
I'm still trying to install a stock downloaded rom for Verizon. When I'm done I'll update you l. Thanks

i got same problem, i think this problem came after installing s.rom. when i flash cm14.1 my audio gone, whereas previously there was no problem on cm14.1
any solution to fix this?

Amri.NVR said:
i got same problem, i think this problem came after installing s.rom. when i flash cm14.1 my audio gone, whereas previously there was no problem on cm14.1
any solution to fix this?
Click to expand...
Click to collapse
reflash your device firmware which will install the stock adsp, or use the HK/BS switcher that available in development section and choose to install Boomsound ... or find any flashable adsp zip.
On non-sense rom like cm14.1, flash firmware or flash adsp only no need to change to Sense rom.
Bs/Hk switcher only when on Sense rom, won't work on cm14.1
---------- Post added at 07:15 PM ---------- Previous post was at 07:14 PM ----------
rhaspody said:
I'm still trying to install a stock downloaded rom for Verizon. When I'm done I'll update you l. Thanks
Click to expand...
Click to collapse
You don't really need the whole stock ROM (if it is RUU), you only need firmware.zip which has adsp.img in it.

ckpv5 said:
reflash your device firmware which will install the stock adsp, or use the HK/BS switcher that available in development section and choose to install Boomsound ... or find any flashable adsp zip.
On non-sense rom like cm14.1, flash firmware or flash adsp only no need to change to Sense rom.
Bs/Hk switcher only when on Sense rom, won't work on cm14.1
---------- Post added at 07:15 PM ---------- Previous post was at 07:14 PM ----------
You don't really need the whole stock ROM (if it is RUU), you only need firmware.zip which has adsp.img in it.
Click to expand...
Click to collapse
Can you help me with the adsp.img file so I can flash it. Pls

rhaspody said:
Can you help me with the adsp.img file so I can flash it. Pls
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=68306013&postcount=31220

rhaspody said:
Can you help me with the adsp.img file so I can flash it. Pls
Click to expand...
Click to collapse
You need the verizon adsp, not sure if GSM one is same.
Later when I'm home .. I'll make one for you based on VZW firmware.
I'll be home in 3 or 4 hours.

rhaspody said:
Can you help me with the adsp.img file so I can flash it. Pls
Click to expand...
Click to collapse
Attached is the flashable adsp zip
NOTE : Only for VERIZON (cdma) not for other GSM device like EU & etc
This will fix your sound problem and also the missing version-main from your getvar or bootloader OS-
This is based on Verizon Marshmallow 6.21.605.3
How-To :
Option 1:
Put the attached 0P6BIMG.zip on root of microSD
Boot to bootloader then select hboot
It will ask to update
Volume Up to update
Once completed - press power to reboot
Done
Option 2:
Put the attached 0P6BIMG.zip in your adb/fastboot folder
Open cmd prompt from your adb/fastboot folder
run below commands
fastboot oem rebootRUU
fastboot flash zip 0P6BIMG.zip
once completed run command
fastboot reboot-bootloader
Done

ckpv5 said:
Attached is the flashable adsp zip
NOTE : Only for VERIZON (cdma) not for other GSM device like EU & etc
This will fix your sound problem and also the missing version-main from your getvar or bootloader OS-
This is based on Verizon Marshmallow 6.21.605.3
How-To :
Option 1:
Put the attached 0P6BIMG.zip on root of microSD
Boot to bootloader then select hboot
It will ask to update
Volume Up to update
Once completed - press power to reboot
Done
Option 2:
Put the attached 0P6BIMG.zip in your adb/fastboot folder
Open cmd prompt from your adb/fastboot folder
run below commands
fastboot oem rebootRUU
fastboot flash zip 0P6BIMG.zip
once completed run command
fastboot reboot-bootloader
Done
Click to expand...
Click to collapse
it works. thanks for your help

ckpv5 said:
Attached is the flashable adsp zip
NOTE : Only for VERIZON (cdma) not for other GSM device like EU & etc
This will fix your sound problem and also the missing version-main from your getvar or bootloader OS-
This is based on Verizon Marshmallow 6.21.605.3
How-To :
Option 1:
Put the attached 0P6BIMG.zip on root of microSD
Boot to bootloader then select hboot
It will ask to update
Volume Up to update
Once completed - press power to reboot
Done
Option 2:
Put the attached 0P6BIMG.zip in your adb/fastboot folder
Open cmd prompt from your adb/fastboot folder
run below commands
fastboot oem rebootRUU
fastboot flash zip 0P6BIMG.zip
once completed run command
fastboot reboot-bootloader
Done
Click to expand...
Click to collapse
Can you make that for me too?
Thanks before:good:

Amri.NVR said:
Can you make that for me too?
Thanks before:good:
Click to expand...
Click to collapse
Post fastboot getvar all result without serial & imei no. I wouldn't know what you need without these info

ckpv5 said:
Post fastboot getvar all result without serial & imei no. I wouldn't know what you need without these info
Click to expand...
Click to collapse
this my fastboot getvar all before i change cid to HTC__044 and MID 0P6B11000, now i can't change MID to stock (0P6B62000)
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311231.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.18.1400.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B62000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
i hope you can help to solved my problem :fingers-crossed:

Amri.NVR said:
this my fastboot getvar all before i change cid to HTC__044 and MID 0P6B11000, now i can't change MID to stock (0P6B62000)
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311231.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.18.1400.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B62000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
i hope you can help to solved my problem :fingers-crossed:
Click to expand...
Click to collapse
Sorry I don't get you .. this is a BEFORE getvar ?
What's the current ? If there is a new one .. let me have a new one. I need to see the current one to know your device better.
I never see a M8w changed to M8x before.
If you only change CID&MID to Asia_WWE but not flashing any X.XX.707.X firmware .. your firmware still M8w only CID/MID is the problem which is really easy to fix.
Anyway, for now you want to fix the sound problem only, right ?
I get back to you tomorrow after you give me more info ... time to bed now .. good night.

ckpv5 said:
Sorry I don't get you .. this is a BEFORE getvar ?
What's the current ? If there is a new one .. let me have a new one. I need to see the current one to know your device better.
I never see a M8w changed to M8x before.
If you only change CID&MID to Asia_WWE but not flashing any X.XX.707.X firmware .. your firmware still M8w only CID/MID is the problem which is really easy to fix.
Anyway, for now you want to fix the sound problem only, right ?
I get back to you tomorrow after you give me more info ... time to bed now .. good night.
Click to expand...
Click to collapse
this is my current getvar all :
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311231.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.18.1400.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
because i cant find firmware for MID 0P6B62000, so i change CID to HTC_044 & MID to 0P6B11000 to flash RUU Asia_WWE to fix sound. but RUU failed:crying: and sound still not fix
see you tomorrow....good night bro

Amri.NVR said:
because i cant find firmware for MID 0P6B62000, so i change CID to HTC_044 & MID to 0P6B11000 to flash RUU Asia_WWE to fix sound. but RUU failed:crying: and sound still not fix
see you tomorrow....good night bro
Click to expand...
Click to collapse
You don't need the full firmware to fix the sound problem.
Your getvar has mixed details - version-main is Marshmallow but the baseband is lollipop. I will give you the Marshmallow adsp first then see whether that will fix your sound problem.
If you want to change back to stock MID 0P6B62000, here is the code
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x36\x00\x32\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
For the CID - I suggest you change it to SuperCID 11111111
You can do these CID/MID changes later. Below adsp is flashable on any CID/MID (GSM)
Same how-to as the previous one for OP.
NOTE : If anyone else downloaded this 0P6BIMG.zip, you need to edit (use Notepad++) the mainver: 6.18.1400.1 to your current firmware no.
if not then your bootloader will show OS-6.18.1400.1

ckpv5 said:
You don't need the full firmware to fix the sound problem.
Your getvar has mixed details - version-main is Marshmallow but the baseband is lollipop. I will give you the Marshmallow adsp first then see whether that will fix your sound problem.
If you want to change back to stock MID 0P6B62000, here is the code
For the CID - I suggest you change it to SuperCID 11111111
You can do these CID/MID changes later. Below adsp is flashable on any CID/MID (GSM)
Same how-to as the previous one for OP.
Click to expand...
Click to collapse
Thank's...i will try tomorrow :highfive:
Update : it's work dude, thanks for your help:highfive:

ckpv5 said:
You don't need the full firmware to fix the sound problem.
Your getvar has mixed details - version-main is Marshmallow but the baseband is lollipop. I will give you the Marshmallow adsp first then see whether that will fix your sound problem.
If you want to change back to stock MID 0P6B62000, here is the code
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x36\x00\x32\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
For the CID - I suggest you change it to SuperCID 11111111
You can do these CID/MID changes later. Below adsp is flashable on any CID/MID (GSM)
Same how-to as the previous one for OP.
NOTE : If anyone else downloaded this 0P6BIMG.zip, you need to edit (use Notepad++) the mainver: 6.18.1400.1 to your current firmware no.
if not then your bootloader will show OS-6.18.1400.1
Click to expand...
Click to collapse
Hi... Same problem with sound, could your help me?
It happened after flash AICP 7.1.2 update, then restore to sense stock rom but not solve the problem...
My device fastboot getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
UPDATE:
I solved the problem reinstalling stock firmware (I had to re-lock bootloader, my device is S-ON) then re-unlock bootloader and re-install recovery image all via fastboot.
Once done this, I reinstalled my backup from recovery... and the problem was solved, audio is back..!!!
-

I have no audio in phone too. I don't know if it the same issue as is being fixed on this thread, but my phone is not working either. I can use sim data, texting, but cannot make or receive calls, and no audio works.
In case this can be fixed by your flash zip file, i would ask if it is possible for one to me made that would work with my phone.
My fastboot getvar all.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.13.771.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

tvmans said:
I have no audio in phone too.
My fastboot getvar all.
(bootloader) version-main: 6.13.771.4
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
Click to expand...
Click to collapse
Has the phone been modified with custom ROM, or ever s-off, change CID, flash another carrier's firmware, etc. (to the best of your knowledge)?
The main version 6.13.771.4 (which indicates the current firmware) doesn't correspond to O2, as far as I know. The "771" versions correspond to H3G carrier. Firmware numbers for O2 should have "206" such as 6.13.206.5. Unless I'm missing something, I don't see how the "771" firmware could have been installed unless it was modified with s-off, change CID, etc.